Message: please select folder that contains your Adobe GoLive files

Hi, I'm really new to DW 5, I did use DW when it first came out and started to get the hang of some things, but my learning was not going as fast as I needed it to go. So I have two questions, I have searched the forums for my answers but I'm getting them in bits and peices and have also found the same question I'm about to ask, but didn't see an answer.
Anyways, first; I'm using OS X (updated to 10.6.5) I was using "GoLive" but in the middle of updating the site, GL would crash, it wasn't from anything inperticular, it would just crash, it was always around 4-5 minutes of using it. So I started using "GoLive CS" it had been working great until today, GL CS is now starting to crash on me, doesn't matter what I'm doing, it's just a time thing.
Is there anything to fix this bug?
I think I might know why, and I could be wrong.......... that this is a compatable issue, but I'm not sure. I think because they are not providing anymore updates for GoLive (any version) that pretty soon I might not even be able to use it at all, but if I'm wrong, Please help.
Now if my thoughts are correct on the first question, then can some one please help me with this message I get when trying to "Migrate" my site from Golive to Dreamweaver.
My first question tonight was going to be why do my pages look like there is nothing on the when I open any page in Dreamweaver when I saw the post about migrating your site to Dreamweaver.
I downloaded the extension for Dreamweaver, I installed it but when I go to migrate the "site" it gives me this message.
Message: please select folder that contains your Adobe GoLive files
I came back to the forums to reread the post, but what it says to change in yoour files, I can't find. It says something about changing your "root" file.
I can't find what to change.
I kind of like GoLive better, at least right now, but I tryed to use DW tonight to really compair the two, I got CS5 about 5 months ago which included Dreamweaver CS5, so I thought I would give it a try utill I opened it and all of my pages were blank. But I still didn't give up and now this is where I am.
Thanks for any help, sorry for such a long posting, but I would really like to see if I like DW with out starting all over and having to rebuild my sites from scratch in DW.

My sites were created in GoLive (i think version 6), but it started to crash, so I switched to GoLive CS (i think this is version 7).
It was working fine until yesterday. Yesterday GoLive CS started to crash, so I decided to give DreamWeaver a try since it came with the version of CS5 that I bought about 4-5 months ago.
Yes, I downloaded and installed the extention from the link, the one that talks about Dreamweaver CS4, and I also read this on that page (below is what I copied from the page)
========================================================================================== ===
Note also: If you created your site with GoLive CS (7) or older and then upgraded to GoLive CS2 (8) or GoLive 9, you may experience problems with the GoLive Migration Kit extension for Dreamweaver CS4. If this is the case, try renaming the following:
Rootfolder-fd > web-content
Rootfolder-fd.settings > web-settings
Rootfolder-fd.data > web-data
========================================================================================== ===
I looked for "Rootfolder-fd -fd.setting and fd.data" I can't find them.
I was going to try and change them.

Similar Messages

Message "please select a source"

Opened Lightroom. Thumbnail images displayed across bottom of screen. See message "Please select a source". Under Folders, I see folder that contains the images highlighted, but the triangular leader is not solid, it's dotted. What do I do here to select the source ?" Has Lightroom lost track of where the images were Imported from? I've scoured Lightroom's windows and menus with no luck. I know this will probably be embarrasingly easy. Thanks.

Opened Lightroom. Thumbnail images displayed across bottom of screen. See message "Please select a source".
Did this message appear simply when you opened Lightroom and did nothing else? Or did you click on something, a button or a menu command or an icon? If so, what did you click on?
Are there question mark icons on the folders? Are the photos on an external hard drive that isn't plugged in (or under Windows, the drive letter has changed)?
Please give us all these details, plus also the version of Lightroom, and your operating system, and anything else that is relevant. If you could show us a screen capture, that would be great. The more information you can give us, the better chance we have of helping you.

How to import photos from a folder that contains hundreds of folders to Photos keeping the same folder structure?

How to import photos from a folder that contains hundreds of folders to Photos keeping the same folder structure?

You'll have to do that manually, i.e. export each album of photos to a folder with the same name located on your hard drive via the File ➙ Export ➙ File Export menu option.
OT

Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items)

Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items from the last itunes or anything from that OS because it had a virus and i just wanted windows 7)

Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD

Sharepoint 2003 Message please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.

Hi All,
We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
Environment:
SharePoint 2003 Service Pack 3
SharePoint 2003 Message :
Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
Thanks in Advance
Ravishankar Maduri MCTS,MCPD,MCP

how large are your site collections and content databases?
sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
For example...
I am on a webiste and wish to upload a photo.
I click on select file on the website
Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
How do I change this?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

Trying to down load a file that contains .exe and .bin files on Unity(gaming builder)

Trying to down load a file that contains .exe and .bin files on Unity(gaming builder). can this be done on iMac. it is a video game? It works fine in windows computer? dont know if this limited information helps. Is there a program or something i need to buy or download? Thanks

Hello,
.exe files are Windows® executable files, so you'd need Windows Installed.

Receiving "no items match your search" message when selecting folder to sync photos

I'm receiving a "no items match your search" message when selecting a folder to sync photos from my XP laptop to my iPod touch. While the iTunes photos tab indicates 0.18 GB of photos, no photos are being sync'ed to the iPod touch. Until last week, all my photos were sync'ing fine.

Try deleting the iPOd Photo Cache folder(s). There may be more than one. For their location:
iTunes: Understanding the iPod Photo Cache folder

How to reduce a PDF document that contains an Adobe XML form?

Hi,
I have created some fillable PDF files using Adobe LiveCycle Designer and used Adobe Acrobat Pro XI to save it as Reader Extended PDF > Enable More Tools (includes form fill-in and save)…
The form includes image, text field, check box, radio button, table and other controls, as well as java scripts behind. The files are from 1 to 3 MB in size. I tried Reduced Size PDF and Optimized PDF, but I got a message: “This PDF document contains an Adobe XML form. Such files cannot be optimized.”
My questions are:
Is there a way I can reduce the file greatly, say about 100 KB?
And after the size reduced, does it still keep the original quality in format and function?
Thanks

Hi,
if you only use default fonts like Arial or Myriad don't embed fonts into the form at all.
If you have to use a specific font because of corporate identity you should check if there are fields in your fom using other fonts like Arial.
Especially floating fields are a reason for big files as they use Designers default font even if you'll never see it in the PDF.
When using images, you should not check the "embed" checkbox, as this will save the images a base64-stream into the xml-source.
If unchecked the images are stored as hex-stream in the PDF-stream which cause a smaller file size.
Also, don't use high res images, 150dpi are far enough. You also don't need 16Bit depth as Designer only supports 8Bit images with RGB colors.

I've got a system 7.1 folder that contains a disk tools.image how can i put this on a floppy disk?

I got myself a PowerBook 165 that has a moved file in the system folder thats stopping it from booting up. I downloaded a system 7 disk tools.image off the internet but the only thing is that I don't know what to do know. I got a usb floppy drive that I use sometimes for my pc stuff but sice mac os 10.8 dosn't have support for HFS I can't copy the image on to the disk. I also have a imac from 2000 that can read HFS files and write them but when ever i try and use disk utility to copy the image over to the floppy disk it always gives me an error. Can someone please help me? I really want my PowerBook to work again.

Was that on the G3 iMac, under Mac OS 9.2 or 10.4?
Is StuffIt Expander installed and active? If so, you could check whether the StuffIt Expander preferences are set to mount images (choose not to instead).
Anyway, download the Network Access Disk 7.5 file (preferably when the machine is running Mac OS 9.2). Use StuffIt Expander to decode the MacBinary (.bin). The self-expanding archive (.sea) will probably open automatically (otherwise, double-click on the .sea file). Locate a Network Access.image file inside the resulting Network Access folder.
Now, try Disk Copy 4.2 under Mac OS 9.2. Do not double-click on the image file. Instead, launch the Disk Copy (4.2) program. Choose to Load Image File, and select and open the Network Access.image. Then, click on the Make A Copy button. It may or may not be possible to create a floppy this way through a USB drive.
If Disk Copy 4.2 does not work, try Disk Copy 6.3.3 (Mount Image under the Image menu) with the Network Access.image file. The mounted image will be called Network Access. Insert a floppy in the USB drive before you choose Make a Floppy from the Utilities menu in Disk Copy 6.3.3.
If the above does not work, again mount the Network Access.image file using Disk Copy 6.3.3. Open the mounted image (Network Access). Inside is a System Folder. Open this System Folder and remove all files from the three folders Apple Menu Items, Control Panels and Extensions (throw them into the Wastebasket/Trash, do not forget to empty the Wastebasket/Trash). The size of the System Folder is now somewhat smaller. Try to drag-copy the System Folder onto an empty (freshly Mac-formatted) 1.44 MB floppy disk in the USB drive. This may or may not work.
Otherwise, you may want to test the Mac OS X dd procedure (the LowEndMac article).
Alternatively, you may want to use an old Windows PC with a built-in floppy drive (and Aladdin/StuffIt Expander and WinImage).
Jan

Getting file or folder that contain my jar

Is there any way to get packeg that contain gif file first get golder in list box and then if we click on it it open image one by one.

Hi,
According to the error message, this issue is a typically database related issue.
1. Make sure that your Content Database in SQL is not full.
Open SQL management studio and connect to SQL server that have your content DB.
You can find SQL server name from "manage servers in this farm".
Right click the content database, click Reports > Standard Reports > Disk Usage to generate a standard report.
For your reference:
http://social.technet.microsoft.com/Forums/en-US/178095de-7fba-482c-9be1-94e60b1906e0/sharepoint-2010-error-the-url-item-url-is-invalid-it-may-refer-to-a-nonexistent-file-or
2. According to KB 894631, this error message will be thrown out when the content database is configured to read-only.
Go to Central Administration > Manage Content Databases and check if it is the case. Also, recycle the application pool in case the cache was corrupted.
Thanks.
Tracy Cai
TechNet Community Support

Where is the folder that contains my Firefox bookmarks?

I'm new to Windows 7. With IE, I can see/add to the Favorites by locating the Favorites folder in Windows Explorer. I cannot find a similar file that contains my Firefox bookmarks. It would be handy for transferring bookmarks from an old computer to a new one.

Thank you for your help. I was hoping to find a folder that I could open and view, but the .json filename doesn't allow that. In looking around, I did learn about Firefox Sync for sharing bookmarks between computers, so I think I found a way to do what I need, as long as the old computer is still functional (which mine wasn't for a while).
I appreciate your quick response and help. Thanks again.

How to I make a "Package" folder that contains my app?

I am not a developer, but I'm hoping someone here will know how to do what I'm asking.
I am creating a VERY simple Filemaker runtime app. It consists of an .app file (which is a package), some extensions, a .usr file, and an aknowledgements PDF.
I'd like to place all of these files in a folder and then have that folder be the new package, so that when the user double-clicks it, it launches the app.
How to I make a folder launch an app when it is double-clicked?
Thanks

I think I misunderstood, or I didn't ask the correct question.
I was not looking for a way to build an installer (although that was helpful!), I was actually looking for a way to make the enclosing folder for my app double-clickable to launch the app.
My app consists of a bunch of files that are all in a folder. That is messy - I'd like for just one icon for my app to live in the /Applications folder. Can I set up the app's enclosing folder so that when the user double-clicks it, it opens the app? (Is this done with folder actions?) This would essentially make the solitary apps folder indistinguishable from the actual app to the user, and it woulc look a lot cleaner than having a bunch of files.
Most apps can be right-clicked to "show package contents". Isn't that essentially just an enclosing folder with a folder script that contains the app and its files?
I hope I'm making sense here.

Had the sudden appearence of a "books" folder that contains the Kindle app. How do I get rid of this folder and return to just the Kindle app icon on the screen?

I have an iTouch. I do not remember exactly what happened, but I now have a folder labeled "Books" that contains my Kindle app.
Previously, I simply had the Kindle app on the home screen.
How do I remove the Books folder and return to the previous setup, i.e. just the Kindle app on the home screen?

Is there another app in the folder like the iBooks app? Yu can move two apps together and when they combine and be placed in a folder. Itunes will guess/suggest a folder name and you can change it. If there are tow apps in the folder just go to that folder and touch and hold the an app and after they start wiggling mode one app out side the folder and folder will disappear if there were only two apps in the folder. To stop the wiggling depress the Home button once.

Copy a folder (that contains mp3s) then import said songs into iTunes?

I have made an automator-created folder action that will, when a folder, which contains an album of MP3s, is dropped into a certain folder, the folder of songs will be copied into another folder and then I want those songs to be added to iTunes.
The action works fine for copying, but it won't add the songs to iTunes. My workflow is as follows, though I've tried different things to try and add the songs:
1) Copy finder items to folder "To Sort"
2) Get folder contents.
3) Add songs to playlist "Library"
Can anyone help me out on this?
Thanks!
-Tristan

TristanG
I believe you need to use the "Add Files to Playlist" instead of the "Add Songs to Playlist". The latter command is used when the songs are already in iTunes.

Message: please select folder that contains your Adobe GoLive files

Similar Messages

Maybe you are looking for