Is there an alarm data member for when an alarm reseets?

I created a spreadsheet to track alarms, but I can only show when the alarm activates. I need the ability to show when an alarm becomes active, when the alarm is acknowledged, and when the alarm resets. I have tried the alarm unacked data member, but that only shows how many alarms have not been acknowledged, it is not per alarm message.
MWarner

Try WorkTime. https://itunes.apple.com/us/app/worktime-work-schedule-shift/id594764457?mt=8 You'll need to get the premium paid version for the alarms/reminders.

Similar Messages

TS4006 Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last pos

Is there google maps data available for Chad, Africa ? I am trying to see where a relative is who works for an Non profit organization there, i have the privacy agreement to do so. In case they are kidnapped there, i would like to know the last position. I am getting an error that google maps is not available so i asusme there is no map data. Wout it be at least for such cases be possible to get longitude and latitude instead of nothing ?
Thanks for ideas / suggestions

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

Is there an exact date yet for the big updates for PPCS4?

I keep hearing late May for the big Adobe updates for PPCS4 and AECS4.
Has any exact date been specified?
I can't wait. CS4 is a mess.
Simon

If Adobe is able to meet their *suggested* release date, you should have no more than 14 days to wait. However, that "end of May" comment might well have been adjusted, depending on how development and implementation of the update go. Many would argue that it would be better to push it back a little, so long as all is done right and it all works as anticipated.
Hunt

Is there an international data plan for Ipad3 with Verizon?

Can I use ipad3 in Caribbean on Verizon? II don't see an international plan as an option. I have used it in the past on ipad1 with AT&T .

Keep in mind that your iPad is unlocked and capable of running off any GSM. Like you, I also have the prepaid plan. When I went to Canada in April, I got a 3G SIM from a local carrier at a very reasonable price. Just popped out my Verizon SIM and put it in a safe place, popped in the Bell Alliant SIM and was good to go.

Is there a sound for when your ipads stops charging?

I want something like when it starts charging but for when it stops because it got disconnected from power source

No there is no sound availble for when your ipad gets disconnected.
The only notecible diffrence is the chargin icon on the top right of your screen and if it's in sleep mode the screen will pop on

No data found for region error on Workflow notification page

Hi !
For workflow, I have created a Non Form Function in Oracle Applications and linked the region to display in the notification. This region's type is StackLayout.
I created an attribute of type Document and assigned it the value in the form
JSP:/OA_HTML/OA.jsp?OAFunc=WF_FUNC
then I added this attribute in the notification message attribute with the Source as Send and Frame Traget as Full Window. Now when the workflow starts, the region does not populate and error shows that there is no data found for this region.
Am I doing something wrong? Any ideas?
Thanks.

Hi,
We have a unique problem.....for timecard approval notification the HXC_TIMECARD form function is calling embedded Timecard region in the workflow notification.....in the HTML call the AprvNtfRN is called as shown below.
OA.jsp?page=/oracle/apps/hxc/selfservice/approval/webui/AprvNtfRN&akRegionApplicationId=809
Now the issue is that the email displays uneven format i..e timecard details like project and task name are vertical instead of horizontal.
Is there a way to code HTML in AprvNtfRN so that the format is obtained as desired?

Are there any new data sources?

Hi I have a doubt. Please clarify.
Are there any new data sources for 2LIS_01_S001, 2LIS_11_VAHDR, 2LIS_12_VCHDR. Because in an interview I told that I had extracted from these data sources.
Then the interviewer had asked me, "Is there any specific reason for using the LIS data sources, because SAP has strongly recommended not to use these LIS data souces".
I replied that SAP has recommended not to use LIS extraction to extract the data from these data sources and I used LO extraction to extract data from these data sources.
My first question is, Is it correct what I told to the interviewer?
If what I told to the interviewer is wrong then my second question is
Is there any new name available for these the following data sources:
2LIS_01_S001,
2LIS_11_VAHDR,
2LIS_12_VCHDR
If so please let me know what it is?
Please advise.
Thank you.
TR.

Hi Anil,
Thank you for that reply. When you say,
"<b>But the DS 2LIS_01_S001 is old one</b>, These DS can be replaced by all Latest 11,12 and 13 application Datasources."
What is the new name for the customer data source 2LIS_01_S001?
Also is there any link or any document where I can get a list of the old data sources and the new ones. Please advise.
Thank you.
TR.

What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people.

FRM-40735 Error when trying to add an employee as key member for a project

FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

Error ORA-06502 says PL/SQL: numeric or value error.
The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
AB

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

HR PA-EC: No Data in Source when data is there

All,
I have activated standard business content and have connected ECC 5.0 source to BW 3.5. I tried executing a load for Compensation Process ODS and the load says there is no data available in source system.
I checked the source and infotype tables 0759 & 0758 both contain data. I also did an extract check in source and it returns values, however when executing the load in BW it returns no values.
Any advice?
Thanks,
DC

Hi
Execute from se38 the program RS_TRANSTRU_ACTIVATE_ALL, inpute the related infosource name and execute it.
Also replicate the data source from RSA1.
I hope this help.
Rgs
Antonino

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESK

I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud Connection

Hi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit

Header Fields are not displayed when there is no data in the report

Hi,
I am having this strange situation in my webi report.
When I refresh my report and when there is no data, column names are not being displayed in my report. All it is showing is two empty rows. When I have data, then report is displaying data along with column headings.
Please suggest me where I am going wrong.
Thanks,
VenMen

Thanks for the update.
Can you try this.
Run the report first time for some data.
When the report is rendered select the table that is displayed.
On the left pane side properties tab.
Expand display and check all the options
Show rows with empty measures
show rows with empty dimensions
Show when empty
Hope this will help
Regards
Kultar

Tcode PFAL there is no model view for the distribution of HR Data.

Hi friends ,
i am facing new problem,i want to send iDOC to other system.
previeous its working fine.
but to day when i open tcode PFAL.
it give me Error:"There is no model view for the distribution of HR master data"
what is the solution for that.
i want to send HR Data.
its urgent please give me any solution ithat will help me alot.
thanks in advance

There is already Distributed Model Created.
can u give me annother tcode so i can send Metarial data, by IDOC.
please help me.
Thanks

Insert data to MySQL when there is new data in the text file

I have one log file, the log file will update its data (alarm type & datetime) when there is alarm. If I would like to write program to monitor the log file every minute, and insert the data to mysql when there is a new data in log file. Any Idea how to use java to write it ?
Thanks !

imagination21 wrote:
Any Idea how to use java to write it ?Yes. But do you have a specific question? What's the problem?

Is there an alarm data member for when an alarm reseets?

Similar Messages

Maybe you are looking for