Is there away to define FIFO costing to a Process Manufacturing Organizatio

Hi Experts,
This is in R12.1.1.
The requirement is process manufacturing should be in FIFO Costing.
However I haven't read any FIFO costing from oracle documentation.
Is there way to assign FIFO costing to a Process Manufacturing enabled Organization?
Please share links if you have regarding this requirements.
Thanks,
Nuel

Hi,
Using the ParallelModel.seq as the base
The new process model in the zip file has a new step in the Initialize TestSocket sequence which generates a new Client Sequence File path based on the Computer Motherboard Test Sequence.seq string.
This new path name is passed as a parameter to the Create Test Socket Execution for each of the test socket executions.
Unzip the file and place the new Process Model into \Components\User\Model\TestStand and place the test sequences into the folder \Examples\Demo\LabVIEW\Computer Motherboard Test.
Launch the seq editor and set the Station Model to use the new Pocess model ( you can set it back when you have finished). Open one of the new test sequences and select the Test UUTs to start the sequences. The
four new sequences will be launched.
I can see that the sequence that you initially open wont be your test sequence but a sequence that allows your test selection or sets up the sequences to run, setups your process model to run etc.
(This new Process Model sequence is from Teststand 2.01 beta, so if you have any problems then cut the new step and paste it into your ParallelModel sequence)
Hope this is a start
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
New_Process_Model.zip ‏54 KB

Similar Messages

  • How can define the cost center (department) manager?

    We are on 11.5.0.10
    Financials implementation is done(GL,AP,AR,FA,IA)
    In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
    How can define the cost center (department) manager? Thanks.

    I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
    Hope this clarifies.
    Vinit

  • FIFO costing

    Hi forum,
    i am trying to build a Query/Crystal Report with costing on hand.
    In SAP how can i get or what table contains the cost of the on hand records.
    I am working with serialized items and i cannot get a correct value because the cost that i am getting (CalcPrice) is not the correct one; the cost i am getting is the cost when the item/serial was received.
    Now, the total valued is correct except that if i display/print the cost the total value doesn't balance correctly.
    Any suggestions?
    Regards,
    Manuel Roman

    Hi Manuel Roman,
    I could understand you requirement.  However, there is no easy answer.  Simply because, FIFO is calculated on the fly as it happens.  You do not have any power to recreate the historical event.  Further more, FIFO costing is on the item level, there is no way to calculate serial number level costs.
    All cost related transaction could be found in OINM tables.
    Thanks,
    Gordon

  • Is there any API to update cost cutoff date?

    Hi All,
    Is there any API to update cost cutoff date?

    Hi,
    As per Oracle we have below APIS for locator in WMS,
    - Create Locator API to create a new locator (CREATE_LOCATOR)
    - Update Locator API to update an existing locator (UPDATE_LOCATOR)
    - Locator Item Tie API to assign an item to a locator (CREATE_LOC_ITEM_TIE)
    - Delete Locator API to delete an existing locator (DELETE_LOCATOR)
    The APIs are part of PL/SQL package INV_LOC_WMS_PUB. This is defined in
    $INV_TOP/patch/115/sql/INVLOCPS.pls.
    You can search *"Locator Maintenance Application Program Interface"* in Metalink or MFGAPI for details.
    Hope it helps
    Kind Regards,
    S.P DASH

  • FIFO Costing issue

    Hello,
    How would I correct or adjust FIFO Costing? I thought that the basis of the FIFO costing is the posting date and not the system date.

    Hi Jaylord,
    As been mentioned by Gordon and Rohul, you could use Inventory Revaluation.
    However, as your question, FIFO calculation in any system should be based on system date / actual date. I don't think there is any system exist that capable calculate FIFO costing based on posting / document date, considering if any back-dated transaction occurred, system should re-calculate all FIFO cost for available stocks which received after those date, and add the possibility that some item already delivered, hence, system need to re-index all records in OINM table, it's all a big confusion and too convoluted.
    And believe me, accounting department won't like this idea even this kind of system exist. It's too much hassle to maintain the inventory ledger. Hope I don't misunderstood your question.
    Best Regards,
    Hendry Wijaya

  • FIFO costing method - what table ?

    Hi all,
    I got one child org. which is on FIFO costing method and I got the standard report from Oracle which show the total value of the item.
    Now, I'm intend to write a report to show the details on what value the system will picked up individually when there is a move order/ issue that happened. What are the tables that involved when there is a move order/ issue for the item. I can see
    mtl_cst_actual_cost_details which has new_cost, prior_cost & actual_cost. But when come to move order/issue the actual_cost was average up. I can't see the FIFO picking up ?
    Please advise.
    rgds
    Lim

    Please post this in the Order Management forum also if you havent done so already.

  • HT5622 both my 2 children have an iphone and iPads each but only one computer with one apple id( one itune account) is there away to have 3 different apple id's on one computer? and if so how?

    Both Myself and my 2 children have an iphone and ipad each but only 1 computer and itunes account( 1 apple id) is there away to have 3 itunes accounts on 1 computer as we are all sick of get each other apps and contacts messages, ect.

    Do your children have separate user accounts on the shared mac? They can have their own user accounts with their own AppleIDs, but you could put the iTunes Library into a shared folder, or better an external drive with the ignore ownership option set.

  • I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message.  "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?

    Hello GuynStPete,
    Thanks for using Apple Support Communities.
    I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Take care,
    Alex H.

  • How to get FIFO cost of the item?

    Hi every body,
    How we can get FIFO cost of the a particulare item from SQL let me know if know anybody.

    Check this:
    Re: New Stock tables in 8.8
    Re: No item cost was found during sales invoice import SAP B1 8.8

  • HT1212 my ipod is disabled for 22604912 minutes.   that is crazy long.  is there away to get back in again

    I have the passwd for my IPOD touch.  But my kid tried the to use my Ipod and now it is disable for 43 years. 
    I cant even connect it to itunes.
    Is there away to enable it

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • If the iPad is slowly loosing space (not much) is there away of getting it back or is that just the nature of the software?

    If the iPad is slowly loosing space (not much) is there away of getting it back?

    How much space is used by your Other? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    How to Remove “Other” Data from iPhone, iPad and iPod Touch
    http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
    Also,
    How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
    http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
     Cheers, Tom

  • Transparency problems when I distort Pdf image size (ie: 100%x99%) then Export. Is there away to fix

    I sometimes have transparency problems when I distort PDF image size (i.e.: 100%x99%) then Export. Is there away to fix.   Or at least be able to preflight and know I have an issue.

    Mostly I have seen borders and drop shadows that will just go away or other wise not print right but only when I distort the image and only on very complicated large PDF images.  When I print it at same % both horz and vert. this problem goes away.

  • HT1222 Is there away to get Patois (Jamaican Language) as an option for Siri please???

    Is there away to get Patois (Jamaican Language) as an option for Siri please???

    Feedback for Apple can be left here:  http://www.apple.com/feedback

  • I am having issues with new version of Final Cut Pro, is there away to download the last version so I can finish my projects?

    I am having major issues with the new version of Final Cut x, I have missing clips and my computer is locking up, I need to finish some projects so is there away to go back to the last version before the new update?

    Not unless you have saved a copy of the previous version; also, any libraries that you have updated to use in the newer version will not be usable in the older version anyway.
    Rather than going back you should try and figure out what is wrong. The current version works great for most users. Start by clearing your preferences: hold down command and option keys while starting FCP X, and confirm when asked. Many different issues can often be solved by just that.
    In case it doesn't solve, please provide more detailed information like OS version, Ram, drive and connection, etc

  • Is there away to make the battery on my iphone last longer?

    The batter on my iphone runs out really fast. is there away for me to make it last longer?

    Read here >  Apple - Batteries - iPhone

Maybe you are looking for