Is there better HTML support in swing?

Is there a better HTML implementation than the one found in swing.text.html package that is freely available? (eg: the HTML parser that supports HTML 4, CSS, and better renderer than JEditorPane)
thanks

I understand you're desire to find a different package. I've been exploring the org.w3c.dom.html package from the W3C.

Similar Messages

JEditorPane and more html support?

Does anyone know if Sun is planning on expanding the html support of the JEditorPane?

Recently there was a postin the JavaHelp interest mailing list saying that the Swing team is looking into probably enhancing the text and html package for Java version 1.5...

Bootcamp - Seems there is no Support for Windows 8.1 once it is loaded. Just got off the Microsoft Help line and they refused to help me because I was running Win 8.1 in Bootcamp. Where do I go for help?

Bootcamp - Seems there is no Support from Microsoft for Windows 8.1, once it is loaded.
I Just got off the Microsoft Technical Help line (Australia ph132058) and they refused to help me because I am running Win 8.1 in Bootcamp.
I have the latest Mac Book Pro Retina with a 1TB Solid State Hard drive running Win 8.1, beautiful machine, but its slower than my old MBP running windows 7 on a standard Drive.
The niggiling problem is that it seems to hang up for seven or 8 seconds on menial tasks........ like generating a new Folder or Note etc. Otherwise it runs reasonably well but not blindingly fast....
I wasn't aware Microsoft refused to help win 8.1 users on the Mac Platform........ shouldn't this Information be made more public...! Seems they are keen to drive potential Windows users away!!
Any suggestions on where I should go for help on this (Windows/Bootcamp in General) would be much appreciated ? ........ don't mind paying a reasonable price if the service is good......
I guess the wheel has turned and Microsoft are having a go at Apple again...?
Many thanks ....... Martin V

Thanks Turbostar.
I was thinking along the same lines. I installed Win 8.0 Pro and upgraded to 8.1 ........ probably a bad move.
I have bought a new 8.1 Licence but cant risk doing a complete reinstall until I have a back up machine ready. (My old MBP is getting a new hard drive) ......... so will give that a go in about a weeks time when the back up is in place. Cant risk having nothing!
When you say "Clean Install" ..... do you mean everything ..... as in Reformat the Bootcamp sector and start from scratch.?
I have a 2 TB LaCie Thunderbolt drive with my back up data on ..... is there a way to make the Reinstall process and large amount of Data transfer easy?
The reinstall is something I need to read up on. I was hoping the solution might be some kind of Tune up on the SSHD.
Good to hear you have a number of MBP's that are flying, I would be disappointed if the final quality wasnt a bit better.
..... do you have any tips on screen Res on the Retina ..... I am running Windows at 125% Zoom, but the Bluetooth, power, wireless, Date Icons etc are all still tiny ...... could really do with an alternative to the old "Advanced Appearance Settings"
cheers ..... Martin V

WHY OH WHY NO HTML SUPPORT MAIL 5.1????

Guys
First of all well done on Lion. It is a geat looking OS and I personally LOVE IT.
I must however askk wht for the sake of not having to run MS on my mac is there still no support for HTML mails in mail for mac 5.1?
The ONLy reason I am running office 2010 for mac is for HTML mails. Now I know you can pull out your mad HTML skill to code a message as HTML ,but in the world we live in that is not always possible.
Please guys shed some light on this.
Arthur

Why have questions when they're not answerable? You're not talking to Apple, and even if you were, you wouldn't be talking to anyone who could comment on the question of why Mail does not have a WYSIWYG HTML editor built into it. That seems to be all you're asking.
Now, if you are looking for solutions, you can always compose your message in the HTML editor of your choice, load it up in Safari and then choose File -> Mail Contents of This Page. Be aware, though, that Outlook copes extremely poorly with HTML e-mail.

How to disable html for whole swing application.

Hi,
As we can disable html for individual swing components , for example JLabel
label.putClientProperty("html.disable",Boolean.TRUE);
BasicHTML.updateRenderer(label,"html.disable");
is there any way to disable html rendering in swing components for system wide / whole application?.
Thanks
Kiran

Better use a utility method in the application like this
public static void disableHtml(JComponent component)
component.putClientProperty("html.disable",Boolean.TRUE);
BasicHTML.updateRenderer(component,"html.disable");
call disableHtml(Component u want to set html disable) for any component in the application.

Help to show a HTML file in Swing

Hiiiiiiiiiii,
During my development Me in a problem . Please help me out.
As per my current context of the project I have to develop a HTML page with Help of CSS and all other things. After that I have to Show the HTML file through Swing. I know how to attach a file with help of URL but need some help to show a HTML file in Swing.
*help to show a HTML file in Swing*

As camickr said Javascript support is not available. If you want to support you have to write code for that. Up to an extent CSS support is provided.
Sample code to display HTML pages in JTexPane (you can use JEditorPane as well):
Construct the URL:
URL url = YourClass.class.getResource("resources/Hello.html");
// If YourClass is in package test.html, then your html page must be available in .....test/html/resources directory.
// And your CSS files must be accessible from your HTML page. This you can test by simply opening the html
// page in your favorite browser.And then call setPage() method of HelpDataPane. Note that, HelpDataPane supports hyperlink activation.
import java.io.IOException;
import java.net.URL;
import javax.swing.JTextPane;
import javax.swing.event.HyperlinkEvent;
import javax.swing.event.HyperlinkListener;
* A pane to display help pages. Help pages are accessed as URL and displayed
* in this pane.
* @author Mrityunjoy Saha
* @version 1.0
public class HelpDataPane extends JTextPane {
     * Creates a new instance of {@code HelpDataPane}.
    public HelpDataPane() {
        super();
        this.addHyperlinkListener(new HyperlinkListener() {
            public void hyperlinkUpdate(HyperlinkEvent e) {
                if (e.getEventType().equals(HyperlinkEvent.EventType.ACTIVATED)) {
                    setPage(e.getURL());
     * Sets the current URL being displayed. The content type of the
     * pane is set, and if the editor kit for the pane is
     * non-{@code null}, then
     * a new default document is created and the URL is read into it.
     * @param page The URL to be displayed.
    @Override
    public void setPage(URL page) {
        try {
            super.setPage(page);
        } catch (IOException ex) {
            try {
                URL blankURL = YourClass.class.getResource("resources/Blank.html");
                super.setPage(blankURL);
            } catch (IOException ioe) {
                ioe.printStackTrace();
}Thanks,
Mrityunjoy

xsl:output method="html"/ - supported?

Is the otutput method "html" supported in
the recent version of the XML/XSL parser?
I was trying to use the <BR> tag with the
<xsl utput method="xml"/> declaration but
I got an XSLException error message
indicating a not well-formed XML document.
Then I tried the following output method
declaration: <xsl utput method="html"/>
but I got the same result?!
Here's a simple XSL stylesheet I was using:
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl utput method="html"/>
<xsl:template match="/">
<HTML>
<HEAD></HEAD>
<BODY>
<P>
Blah blah<BR>
More blah blah<BR>
</P>
</BODY>
</HTML>
</xsl:template>
My question is: "How do I use a not
well-formed tags (like <IMG>, <BR>, etc.)
in a XSL stylesheet?"
Thank you very much in advance!
Cheers.
Georgi

Sorry for jumping in on this thread, but I have a question regarding you reply. I have an XSL stylesheet that preforms XML to HTML conversion. Everything works correctly with the exception of those HTML tags that are not weel formed. Using your example if I have something like:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html"/>
<input type="text" name="{NAME}" size="{DISPLAY_LENGTH}" maxlength="{LENGTH}"></input>
</xsl:stylesheet>
It would render HTML in the format of
<HTML>
<input type="text" name="in1" size="10" maxlength="20"/>
</HTML>
While IE can handle this Netscape can not. Is there anyway to generate completely cross browser complient HTML with XSL?
Thanks!

Full HTML Support

I haven't played with CS3 yet, so I don't know if this
already exists... but, are there any plans for full HTML support
within flash for future releases?
Basically, if I have a flash movie that utilizes a large
portion of the screen, and I need to display some HTML content, I'm
stuck. It's not feasible to use iFrames or floating divs in this
situation. It would be great if I could load the HTML page into a
movieClip and have full support of all attributes.
Thanks.

No big changes in HTML support in Flash CS3 Professional.
Some slight mods from Flash 8:
" Using HTML text formatting in Flash CS3 Professional"
http://www.adobe.com/go/tn_14808
The tool that is going to be the change agent for html in SWF
is Apollo.
http://labs.adobe.com/wiki/index.php/Apollo:Documentation:Adding_HTML_content_to_SWF-based _applications

E5 DAC/Amp Win8 error "There is no supported audio device available"

I've just received my Sb E5, and installed the software package (while the E5 was connected and charging) without "apparent" problems. However, if I start the software it will report a problem with reading the device, and if I use the menu and select "audio device selection" it will immediately report"
"There is no supported audio device available"
If I disconnect, the software's volume indicator will max, and then if I reconnect USB the volume will return to ~15%.
Please advise ...
TIA

Have you installed all of the drivers:
http://www.msi.com/product/mb/Z77A-G45.html#/?div=Driver&os=Win7%2064
I don't see anything about the Sound Blaster Cinema
http://www.msi.com/product/mb/Z77A-G45.html#/?div=Overview
Did you mean the z87-g45 gaming? http://www.msi.com/product/mb/Z87-G45-GAMING.html

SilverLight and HTML support with Localization and RTL with SAP Crystal Rep

Hi ,
Can you please provide the fallowing information ,
1)     Silverlight:-
a)     Does SAP Crystal Reports support , building reports with Silverlight?
b)     Does SAP Crystal Reports has   Silverlight Designer and Viewer support the fallowing list of languages:-
Arabic
Czech
Danish
Dutch
English
Estonian
Finish
French
German
Greek
Hungarian
Italian
Latvian
Norwegian
Polish
Portuguese
Rumanian
Russian
Spanish
Swedish
Turkish
Ukraine
China
c)     Does this support RTL format ?
2)     HTML:-
a)     Is there any support of Designer and Viewer to create HTML reports?
b)     If there is a support of creating HTML reports , is there any support for above listed languages?
c)     How about RTL support in case of that?.
Thanks,
Prasanna

Hi ,
Thanks for providing the information , need more infomation towards creating HTML reports. I didnt understand the fallowing answer
Is there any support of Designer and Viewer to create HTML reports?
- Yes. Export to HTML 3.2 and 4
What i mean about support of Designer and Viewer to create HTML reports is , using SAP crystal reports tools , i must be able to design a HTML report and use the report in WebPages .
I mostly think this can be achieved and supported , however i need some kind of acknowledgement at this point of time.
**Also my concentartion is more on getting information on Supporting Localization for the listed languages.If you suggest some blog or forum link which demonstrates on Localization , i would appreciate , if you add infortmation on that like , lif the approach you are suggesting is generic to accept any type of language with RTL(Right To Left format) support**
Thanks.

TS1559 Wi-Fi on my iphone4s is grayed out and I think this happened after the update 7.0.4. I went to apple store and they turned me down that there is no support in the 2nd year. Extremely disappointed and no way except to pay and get replacement. Pls ad

Wi-Fi on my iphone4s is grayed out and I think this happened after the update 7.0.4. I tried all possible solutions through apple online support and then went to apple store as a last resort and they turned me down that there is no support in the 2nd year. Only option is to pay 160 pounds and get replacement. When I argued further, they said that if I had bought the iphone directly with them, they would replace me without any cost. This is even more frustrating.
THIS IS TOTALLY UNFAIR as its not my fault. If the release of faulty 7.0.4 software is timed in my 2nd year of contract and since I didnt buy the iphone directly from Apple, how is it fair to ask me to pay for replacement. Its not my fault after all.

Because you are outside the one year hard ware warrenty, Apple covers for the first year on their dime, if you had a two year contract why not make sure you have a two year insurance on your phone?
Either way as I can see/assume you are from europe you can look at your consumer laws to see if you qualify for anything there, beyond that it isn't the software that broke the device, it's a hardware failure because thousands upon thousands are happy and content with iOS 7.0.4

How best to save photos? I want to protect my photos (15,000 of them) by putting them on a portable drive and storing it in my safety deposit box. Is it better to export them all, drag the Photo file, use Time Machine – or are there better alternatives?

I am a 'newby' to the discussion world. Hope I am doing this right. How best to save photos? I want to protect my photos (15,000 of them) by putting themon a portable drive and storing it in my safety deposit box. Is it better to export them all, dragthe Photo file, use Time Machine – or are there better alternatives?

Welcome to the discussions! You can use Time Machine and I would also recommend for you to manually copy your iPhoto Library (on your Pictures folder) to an external drive/thumb drive so you can restore it from there should you loose your TM backup. Exporting them from iPhoto would not preserve the libraries' integrity neither your originals, should you choose to edit them in iPhoto.
Regards.

Will there ever be support in Lightroom 4 for Olympus raw files

Will there ever be support in Lightroom 4 for Olympus raw files?

Which camera exactly?
Support varies camera by camera.
Supported cameras
Camera Raw plug-in | Supported cameras
Compatible Adobe software
Camera Raw-compatible Adobe applications

HT5815 im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

Here is a thread for you: Is there any possible way to run PPC...: Apple Support Communities

How to create html files using Swing

I am developing a billing system in java. I want to generate cash memo and other related documents in HTML format. I have explored html package in swing but without result. Please help me.
Arshad

Hi,
I agree with the previous poster. An additional way of generating HTML would be to directly write it. Class SHTMLWriter in package com.lightdev.app.shtm of application SimplyHTML at http://www.lightdev.com/template.php4?id=3 gives this opportunity.
With this, you can do something such as /**
   * example of synthesizing HTML code to a Writer using
   * class SHTMLWriter
   * @param fileName the name of the file to write HTML to
public void writeHTML(String fileName) {
    try {
      FileWriter fw = new FileWriter(fileName);
      SHTMLWriter w = new SHTMLWriter(fw);
      w.startTag(HTML.Tag.HTML.toString(), null);
      w.startTag(HTML.Tag.BODY.toString(), null);
      SimpleAttributeSet set = new SimpleAttributeSet();
      set.addAttribute(CSS.Attribute.FONT_FAMILY, "SansSerif");
      set.addAttribute(CSS.Attribute.FONT_SIZE, "12");
      w.startTag(HTML.Tag.P.toString(), set);
      fw.write("some text");
      w.endTag(HTML.Tag.P.toString());
      w.endTag(HTML.Tag.BODY.toString());
      w.endTag(HTML.Tag.HTML.toString());
    catch(Exception e) {
      e.printStackTrace();
}The HTML output is hard coded in this example. Certainly any HTML code can be created dynamically/programmatically instead. Class SHTMLWriter is partly meant as a convenience class for writing HTML. One can just through start and end tags as in above example. In the start tag any valid AttributeSet can be given.
HTH
Ulrich

Is there better HTML support in swing?

Similar Messages

Maybe you are looking for