Is voltage change from 110 to 220 on my monitor HP f1905 automatic or do I need a transformer?

Hi,
It will convert automatically:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00655618&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

No voltage change from bios settings on my P7N2 Diamond

Hello all,
This is my first post here. Yes , I am a noob, so be gentle with me. First things first, I'll give you my system set-up:
Motherboard: P7N2 Diamond
Memory: 2X TW3X2G1600C9DHX is a 2048MByte matched pair of DDR3 SDRAM DIMMs
CPU: E8600 Intel core 2 EO stepping
Graphics card: EVO9800GX2
HD: Maxtor 280 gig esata
OS: Vista 64
OK, so here's my problem. I can not seem to change my CPU voltage settings. I go into the bios and change the CPU voltage to whatever I want, but when I boot up windows and open CPU-Z and or Everest, I get matched indications of my CPU voltage running at a constant .99V no matter where I set the voltage in bios. The only way I can see a change of my CPU voltage is by enabling EIST? or whatever the auto voltage control in the bios is called, and then I see a change from .99 to 1.14 depending on the programs that are running, and the overall load on the computer. There appears to be a similar problem with the DDR voltage, or Vdimm. I set it to 2.1 to get my corsair ram to run stable at 1600 but in CPU-Z and everest it says that it is at 1.5 volts. I cant seem to figure out why its doing that. I am thinking that its either a bios problem, a incompatibility problem with the CPU, or a faulty MB. Please let me know what you think.
Thanks,
Rod

Ah hah!!!! A voice!!!! .....Well, a font anyway Thank you NovJoe for responding. I have been checking the boards regularly for a reply. Well, all I can say is that the MB comes with a program called "dual core" that is a board utility, and it matches exactly the voltage readout on CPU-Z and Everest. One program may respond slightly faster than the other, but you can generally see the voltage change "float" when I am using EIST on all the programs, and they correspond with each other. This leads me to believe that they are working, even if not exactly accurate. They do all read .99V when I am not using EIST. I am convinced that the data that they are giving me is correct, because I cranked my CPU voltage to maximum and had no change whatsoever in temperature or performance, or anything else. Thanks again.

If I change from Int Explorer will my favourites/bookmarks be saved automatically in Firefox?

My Internet Explorer continually crashes/freezes & I want to change to Firefox.
Will my favourites/bookmarks be saved automatically?

Firefox uses its own bookmarks that are kept separately from the IE Favorites in an SQLite database file called places.sqlite.
Firefox will offer to import the IE Favorites on the first start, so those will be available, but you may need to move them to the bookmarks toolbar for easier access.
*https://support.mozilla.com/kb/how-do-i-use-bookmarks
* https://support.mozilla.com/kb/Importing+favorites+and+other+data+from+Internet+Explorer
See also:
*https://support.mozilla.com/kb/Browsing+basics

HT3529 i have just updated my iphone to the ios 7.0.2 and now the text message bubble has changed from blue to green, is this as it should be?

i have recently updated my iphone to the ios 7.0.2 version and now the text message bubble has changed from blue to green, is this as it should be?

You will need to purchase the upgrade CD for 10.6 from the Apple Online store, OR you can likely get one at an Apple Retail Store. It is the last version that was available on CD. After 10.6, the upgrades are available in the Mac App Store.
HTH

Change from edge firewall to single network adapter.

Can I change from Edge Firewall to SIngle Adapter mode? If possible, what do I need to take on consideration for doing it.
Thanks for advise

You can change the template by running the Getting Started Wizard (GSW). Do note that your configuration will be lost, you will have to export your configuration and then restore it piece by piece, e.g. you can't import the entire configuration
but rather objects (e.g. rules, network objects etc). Then you'd have to verify the imported configuration and if necessary modify it to a working state.
If the configuration isn't to complicated, I'd start over manually. If you go for the export/import I strongly recommend that you test this on a test system first to verify your procedure.
But yes, its doable.
Hth, Anders Janson Enfo Zipper

Make SSD change from SELECTABLE to PERSONALIZED

Hello everyone,
Now I am working on one JCOP card (J3A040 v2.4.1) using GPShell.
I have installed a SSD on the card using the preinstalled package with the privilege 0x98, now the cycle state is 7 which means SELECTABLE, I would like to extradite an applet to this security domain, So I need to turn it to PERSONALIZED. My question is ... How could I do it ?
I read from the thread below that The SSD does automatically change from the SELECTABLE to PERSONALIZED state when it has all the keys it needs to operate.
https://kr.forums.oracle.com/forums/thread.jspa?threadID=1750488
So far I have done is
select the SSD
open secure channel with default keys
put secure channel keys
Then I was expecting that the SSD will turn to PERSONNALIZED automatically, however, no it didn't change, the state is still 7
Here is the commands I used:
mode_211
mode_211
enable_trace
enable_trace
enable_timer
enable_timer
establish_context
establish_context
command time: 31 ms
card_connect
card_connect
command time: 0 ms
select -sdAID A000000003535041
select -sdAID A000000003535041
Command --> 00A4040000
Wrapped command --> 00A4040000
Response <-- 6F658408A000000003000000A5599F6501FF9F6E06479100783300734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104
command time: 78 ms
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012A026E01029000
Command --> 805000000892307E0954D65B2200
Wrapped command --> 805000000892307E0954D65B2200
Response <-- 0000109000248695546101020014C343BDBA9544AB1C5DF273D9E82A9000
Command --> 84820100101A431B62EF77F1D7389C9852B1EF31EA
Wrapped command --> 84820100101A431B62EF77F1D7389C9852B1EF31EA
Response <-- 9000
command time: 344 ms
put_sc_key -keyver 0 -newkeyver 3 -mac_key 505152535455565758595a5b5c5d5e5f -enc_key 505152535455565758595a5b5c5d5e5f -kek_key 505152535455565758595a5b5c5d5e5f -current_kek 404142434445464748494a4b4c4d4e4f
put_sc_key -keyver 0 -newkeyver 3 -mac_key 505152535455565758595a5b5c5d5e5f -enc_key 505152535455565758595a5b5c5d5e5f -kek_key 505152535455565758595a5b5c5d5e5f -current_kek 404142434445464748494a4b4c4d4e4f
Command --> 80D8008143038010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D600
Wrapped command --> 84D800814B038010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D6E07393F12DA1B7FB00
Response <-- 03A4B7D6A4B7D6A4B7D69000
command time: 250 ms
get_status -element 40
get_status -element 40
Command --> 80F24000024F0000
Wrapped command --> 84F240000A4F009DB0F0965ADAA90600
Response <-- 08A00000000353504107989000
List of elements (AID state privileges)
a000000003535041 7 98
command time: 63 ms
card_disconnect
card_disconnect
command time: 0 ms
release_context
Thank you in advance
yuyu

I looked through the above commands again, and I realized that actually the keys were put to the Issier Security Domain instead of the SSD, because the selecte command chosed the ISD.
Then I selected the SSD and tried to open a secure channel but I failed ..
mode_211
mode_211
enable_trace
enable_trace
establish_context
establish_context
card_connect
card_connect
select -AID A000000003535041
select -AID A000000003535041
Command --> 00A4040008A000000003535041
Wrapped command --> 00A4040008A000000003535041
Response <-- 6F658408A000000003535041A5599F6501FF9F6E06479100783300734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B0402156
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 6A88
GP211_get_secure_channel_protocol_details() returns 0x80206A88 (6A88: Referenced data not found.)
How could turn the SSD to personalized state and finally install an applet on it ??
I got blocked on this for days, please help me out . Thank you in advance.

HT1688 I have the Apple world travel adapter Kit. Do I need a voltage converter to step down 220 V to 110 V

I have the Apple world travel adapter Kit. Do I need a voltage converter to step down 220 V to 110 V?

As Meg said, no, you don't need a converter. Take a close look at the charger... it says 110-240VAC Input, or something similar.

Switching 4510 from 110 to 208 volts

We have a 4510 (WS-C4510R+E, with WSX45SUP7-E) with redundant supervisors and dual 6000W power supplies (PWR-C45-6000ACV) currently running at 110 volts. We are installing four Nema L6-20 receptacles to be able to have full PoE and redundancy across our power supplies.
Will it be possible to cut over from 110 to 208volts while the switch is running, by unplugging the old cords and plugging in the new cords, one by one?
Or, will we have to shut down the switch entirely, plug all new power cables in, and then power the switch back up?
-John

Hi,
The 6000 W AC-input power supply should not be used in mixed-voltage configurations. All the inputs in a chassis must be at the same voltage (110 VAC or 220 VAC). That said you will need to have both power supplies at the voltage at the same time, beacuse the two power supplies must have identical inputs and all inputs must be at the same voltage. If the input voltages are mismatched one of the power supplies will go into error-disable state.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/configuration/guide/pwr_envr.html#wp1084405
Hope this helps.

Disp+ work process changes from green to disabled

Hi all,
I want to install the SAP Netweaver 2004 server(ABAP + Java ) on windows box with MSSQL 2000 as backend.
I wanted to know the sequnce that needs to be followed to install the component.
I went in the following:
a)I installed the MSSQL Server 2004 SP4
b)I installed the ABAP part.
Now when i tried to start the server from the SAP Console ,the process
(disp + work) changes from green to disable.
If i check the logs i get the following
Thu Jun 28 16:26:07 2007
ERROR => W0 (pid 2912) died [dpxxdisp.c 12170]
ERROR => W1 (pid 2600) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2392) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 156) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 2188) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2684) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 1888) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2912 (SIGUSR2)
ERROR => DpWpKill(2912, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2600 (SIGUSR2)
ERROR => DpWpKill(2600, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2392 (SIGUSR2)
ERROR => DpWpKill(2392, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-156 (SIGUSR2)
ERROR => DpWpKill(156, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-2188 (SIGUSR2)
ERROR => DpWpKill(2188, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2684 (SIGUSR2)
ERROR => DpWpKill(2684, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-796 (SIGUSR2)
ERROR => DpWpKill(796, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-1888 (SIGUSR2)
ERROR => DpWpKill(1888, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:17 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Jun 28 10:56:17 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2912 Ended no 1 0 0
1 DIA 2600 Ended no 1 0 0
2 UPD 2392 Ended no 1 0 0
3 ENQ 156 Ended no 1 0 0
4 BTC 2188 Ended no 1 0 0
5 BTC 2684 Ended no 1 0 0
6 SPO 796 Ended no 1 0 0
7 UP2 1888 Ended no 1 0 0
Dispatcher Queue Statistics Thu Jun 28 10:56:17 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Jun 28 10:56:17 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jun 28 10:56:17 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:22 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (432) (SOFT_KILL)
Stop icman
killing process (2124) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:432 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:23 2007
NiISelect: TIMEOUT occured (1000 ms)
Thu Jun 28 16:26:24 2007
[DpProcDied] Process died (PID:432 HANDLE:1600)
[DpProcDied] Process lives (PID:2124 HANDLE:1588)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:25 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2124 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3520) [dpxxdisp.c 8478]
Good Bye .....
What can be the problem.
Best Regards
Manoj

what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck,

How to relate temperature to voltage change

I was basically wondering how I would be able to set up a program to watch a temperature change from a change in voltage. The reason that there is a -1 voltage leaving the program is due to the fact that I needed to shut down a function generator, which required a -1 Volt peak to peak to be send to the Input section of the generator. What I need from this program is a way to see a temperature change when a voltage changes. The temperature reading must be in a numerical valve and represent the temparture of a certain water tank from a thermistor. The thermistor changes resistance, which can be converted into a change in voltage, thus all i need from Labview is to set off an alarm at 45 degrees and also to show the temparture valve.
Attachments:
CoolingandCouplingwithAlarm.vi ‏163 KB

Hi,
I don't recall where I got the coefficients used in this VI, I am using them on a Quality Thermistor #QT06002-343. It is a fairly standard 10Kohm NTC thermistor.
Jim
LV 2013
Attachments:
10K_NTC_Calculation.vi ‏15 KB

I'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

i'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

Read the small print on your power brick. It handles 110 - 240 volts automatically. All you need is a plug adapter to make your current wall plug fit the European wall sockets.

3GS power plug for 110 and 220?

I've received different answers to this question. The plug that comes with the 3GS is rated 110-240, which to me means I don't need a converter when using in either 110 or 220 countries. The Apple store guy says not true. I figure all I need is an adapter for the prong, correct?

palcant wrote:
I've received different answers to this question. The plug that comes with the 3GS is rated 110-240, which to me means I don't need a converter when using in either 110 or 220 countries. The Apple store guy says not true. I figure all I need is an adapter for the prong, correct?
You are correct, he is not: All you need is an adapter from your supply to the sockets of the country you are visiting.
Phil

Issue on payroll area which is changing from biweekly to monthly in Mid of

Dear Experts,
I have an issue on payroll area which is changing from biweekly to monthly in Mid of the Month.
One employee was retired on 29th of March, so his payroll area was changed from biweekly to monthly on 29th. For retire we are running the payroll on 8th of every month. When we are running payroll for April he has received only 29th and 30th retire salary, by the time he is not yet retired also.
In this case the main problem is monthly payroll time is early then biweekly. so the employee is getting retire salary then his regular pay.
Can you guide me where we can control that monthly payroll area should not be triggered at this movement.
Thanks
Chandra

You can do that but it is not that easy as it sounds if you have to do that over a period of say 10-20 years...lot of operational work!!
Also say if you load the retiree action one month ahead say on 03/01/2011. And the employee is retiring on 03/29.
Retire payroll is on 04/08
Biweekly is on 04/15
Now you decide to lock the employees after the 1st biweekly check of March...say which was process 14 days before 04/15 would be 04/01. The employee number is locked between 04/01 to 04/15. For 14 days you have locked these employees!!
What happens if there is adjustment pay...you have to manually go and unlock the employee and lock him after the adjustment check.
I will let you decide based on the comfort, SAP effort, Operational effort and system maintenance.

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

TS3899 I changed from an Iphone to a Android. I can't get my email from other Iphones

I changed from an Iphone to a Android. Now I can't recieve emails from other Iphones.

Email should not be a problem, text messages can be but not email if it is set up correctly on your new phone.

Is voltage change from 110 to 220 on my monitor HP f1905 automatic or do I need a transformer?

Similar Messages

Maybe you are looking for