ISchedulerTask properties not shown

Hi
I have previously created an ISchedulerTask called RoleMapperService.
This ISchedulerTask have a number of properties which can be configured under "System Administration | System Configuration | Knowledge Management | Content Management | Global Services | Scheduler Tasks | RoleMapperService".
Now I have added an extra property, but after deployment the property is not shown on the edit page of the task RoleMapperService with all the other properties.
I can see that the new RoleMapperService have been deployed to the portal if I "Browse Deployment".
I added the property in the files:
- src.configinstalldatacmservicesschedulertasksRoleMapperService.co.xml
- src.configinstallmetaexpandedcmservicesschedulertasksRoleMapperService.cc.xml
And updated the zipped file:
- distPORTAL-INFconfigRoleMapperService.prjconfig.configarchive
with the above ".co.xml" file.
Note: this file is not updated automatically when building the project inside Development Configuration perspective in NWDS 7.0.09. This has to be done e.g. directly in Winzip due to some bug in NWDS.
It can be build with PAR export wizard, but this is not possible when using NWDI, since the projects are build at the NWDI server in this configuration.
I use SAP EP 6.0 sp13 in a NWDI setup.
Can anybody please help?
Best regards
Mads Brændgaard-Nielsen

Hi
Do you have RFServiceWrapper in your application? This service is only used to add   classloader of your application to the registry . If not add this to your portalapp.xml :
       <service name="RFServiceWrapper">
             <service-config>
                   <property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
                   <property name="startup" value="true"/>
             </service-config>
       </service>
You should also add following code to the init method in com.sap.netweaver.rf.wrapper.RFServiceWrapper :
           CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
Hope this help
Regards
Jakub Krecicki

Similar Messages

  • Predefined properties not shown in Search

    Hello!
    I’ve done the following:
    Created a set of predefined properties with the Indexable property set.
    Created a new “Search Option Set”, where I’ve put the list of all my Predefined properties in the “Predefined Properties (csv) “ field.
    In the list of “Allowed predefined properties” I’ve added all my Predefined properties.
    And now what I expect from this setup:
    A. The search option dialog should display all my predefined properties with the appropriate fields,
    B. In the listbox with “Predefined properties” I expect to see all my predefined properties.
    And now what I actually get (and that is my problem):
    A. The search option dialog is displaying all my predefined properties with the appropriate fields – so that is as I expected.
    B. The listbox is only showing some of my predefined properties.
    I’ve checked and double checked that all predefined properties are set to Indexable.
    So.... Any suggestions??
    Regards,
    HC.

    G'day mate!!
    Please see <a href="https://forums.sdn.sap.com/thread.jspa?threadID=224642">Search - Prefill of Predefined Properties</a>
    I had a simmillar issue
    Kay-Arne

  • LOV not shown in ViewLink

    I have two view objects based on entitys:
    EOUsuarioWeb-->users
    EOGesdusrrol.--> user with rol
    I create a viewLink matching "EOUsuarioWeb.Usrcodigo" with "EOgesdusrrol.Gescodusr" with one to one relationship. When I run the application module, clic on the viewLink and the list of values for roles(in EOgesdusrrol) is not shown. But if I clic on the "EOgesdusrrol view object" then I can see the list of values.
    I developed this because I have a page with users and rol in one table. So with the EOUsuarioWeb I register a new user and with EOGesdusrrol I register the rol.
    Any help please
    Thanks.

    The list of values is defined in the EOGesdusrrol for the attribute "Desrol" . This attribute is calculated in the query:
    SELECT EOGesdusrrol.GESCODROL, ---> This is the role code
    EOGesdusrrol.GESCODUSR,
    EOGesdusrrol.GESUSRREG,
    EOGESDUSRROL.GESFECREG,
    R.GESDROLDES DESROL ---> This is the role description
    FROM GESDUSRROL EOGESDUSRROL,GESDROLMAE R
    WHERE EOGESDUSRROL.GESCODROL = R.GESDROLCOD
    <ListBinding
    Name="LOV_Desrol"
    ListVOName="EOGesdrolmaeView"
    ListRangeSize="-1"
    NullValueFlag="none"
    MRUCount="0">
    <AttrArray Name="AttrNames">
    <Item Value="Desrol"/>
    </AttrArray>
    <AttrArray Name="DerivedAttrNames">
    <Item Value="Gescodrol"/>
    </AttrArray>
    <AttrArray Name="ListAttrNames">
    <Item Value="Gesdroldes"/>
    <Item Value="Gesdrolcod"/>
    </AttrArray>
    <AttrArray Name="ListDisplayAttrNames">
    <Item Value="Gesdroldes"/>
    </AttrArray>
    <DisplayCriteria
    Hint="hide"/>
    </ListBinding>
    <ViewAttribute
    Name="Desrol"
    IsPersistent="false"
    PrecisionRule="true"
    Precision="100"
    Type="java.lang.String"
    ColumnType="VARCHAR2"
    AliasName="DESROL"
    Expression="DESROL"
    SQLType="VARCHAR"
    LOVName="LOV_Desrol">
    <DesignTime>
    <Attr Name="_DisplaySize" Value="100"/>
    </DesignTime>
    <Properties>
    <SchemaBasedProperties>
    <DISPLAYWIDTH
    Value="25"/>
    <CONTROLTYPE
    Value="combo_lov"/>
    </SchemaBasedProperties>
    </Properties>
    </ViewAttribute>
    In the viewLink I can't not see the attribute "Desrol" as a LOV
    Edited by: Miguel Angel on 06/08/2012 06:34 PM

  • Tables not shown in connections tree for DB2 databases

    Hi!
    I often use SQL Developer to connect to our DB2 databases. However, when I expand the desired schema in a DB2 database, the Tables node is empty, although it should not be. There are tables in that schema and I can select data from them, so security is not an issue:
    For example:
    select tabschema, tabname from syscat.tables where tabschema not like 'SYS%' order by 1,2;
    returns many schema names and table names is those schemas. Let's pick one, i.e table name METER_TYPE in schema METER ( there are 4 tables in schema METER)
    select count(*) from meter.meter_type
    returns: 38
    However, the Tables node shows no tables. Tese tables are not Aliases (DB2 slang for synonyms) or views, however, those 2 nodes are also empty when they should not be - we have schemas with aliases and views, which are also NOT shown. The Index node is populated most frequently, but not completely (there are indexes missing).
    Here are my details (don't be fooled by java 1.7, the behaviour is the same with 1.6):
    DB2 jdbc driver version: 3.57.82
    About
    Oracle SQL Developer 3.0.04
    Version 3.0.04
    Build MAIN-04.34
    Copyright © 2005, 2011 Oracle. All Rights Reserved.
    IDE Version: 11.1.1.4.37.59.31
    Product ID: oracle.sqldeveloper
    Product Version: 11.1.2.04.34
    Version
    Component     Version
    =========     =======
    Java(TM) Platform     1.7.0
    Oracle IDE     3.0.04.34
    Versioning Support     3.0.04.34
    Properties
    Name     Value
    ====     =====
    awt.toolkit     sun.awt.X11.XToolkit
    class.load.environment     oracle.ide.boot.IdeClassLoadEnvironment
    class.load.log.level     CONFIG
    class.transfer     delegate
    file.encoding     UTF-8
    file.encoding.pkg     sun.io
    file.separator     /
    http.nonProxyHosts     localhost|localhost.localdomain|127.0.0.1|::1|localhost|alex.localdomain
    ice.browser.forcegc     false
    ice.pilots.html4.ignoreNonGenericFonts     true
    ice.pilots.html4.tileOptThreshold     0
    ide.AssertTracingDisabled     true
    ide.bootstrap.start     5367470843749639
    ide.build     MAIN-04.34
    ide.conf     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin/sqldeveloper.conf
    ide.config_pathname     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin/sqldeveloper.conf
    ide.debugbuild     false
    ide.devbuild     false
    ide.extension.search.path     sqldeveloper/extensions:jdev/extensions:ide/extensions
    ide.firstrun     true
    ide.java.minversion     1.6.0_04
    ide.main.class     oracle.ide.boot.IdeLauncher
    ide.patches.dir     ide/lib/patches
    ide.pref.dir     /home/alex/.sqldeveloper
    ide.product     oracle.sqldeveloper
    ide.splash.screen     splash.gif
    ide.startingcwd     "/home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin"
    ide.user.dir     /home/alex/.sqldeveloper
    ide.user.dir.var     IDE_USER_DIR
    ide.vcs.noapplications     true
    ide.work.dir     /home/alex/sqldeveloper
    ilog.propagatesPropertyEditors     false
    java.awt.graphicsenv     sun.awt.X11GraphicsEnvironment
    java.awt.printerjob     sun.print.PSPrinterJob
    java.class.path     ../../ide/lib/ide-boot.jar
    java.class.version     51.0
    java.endorsed.dirs     /home/alex/prg/jdk1.7.0/jre/lib/endorsed
    java.ext.dirs     /home/alex/prg/jdk1.7.0/jre/lib/ext:/usr/java/packages/lib/ext
    java.home     /home/alex/prg/jdk1.7.0/jre
    java.io.tmpdir     /tmp
    java.library.path     /home/alex/prg/oracle/instantclient_11_2::/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
    java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
    java.protocol.handler.pkgs     oracle.jdevimpl.handler
    java.runtime.name     Java(TM) SE Runtime Environment
    java.runtime.version     1.7.0-b147
    java.specification.name     Java Platform API Specification
    java.specification.vendor     Oracle Corporation
    java.specification.version     1.7
    java.util.logging.config.file     logging.conf
    java.vendor     Oracle Corporation
    java.vendor.url     http://java.oracle.com/
    java.vendor.url.bug     http://bugreport.sun.com/bugreport/
    java.version     1.7.0
    java.vm.info     mixed mode
    java.vm.name     Java HotSpot(TM) 64-Bit Server VM
    java.vm.specification.name     Java Virtual Machine Specification
    java.vm.specification.vendor     Oracle Corporation
    java.vm.specification.version     1.7
    java.vm.vendor     Oracle Corporation
    java.vm.version     21.0-b17
    jdbc.library     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/jdbc/lib/ojdbc6.jar
    line.separator     \n
    log.file.name     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/extensions/oracle.datamodeler/log/datamodeler.log
    oracle.home     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper
    oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
    oracle.jdbc.mapDateToTimestamp     false
    oracle.net.tns_admin     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/network/admin
    oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
    oracle.xdkjava.compatibility.version     9.0.4
    orai18n.library     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/jlib/orai18n.jar
    os.arch     amd64
    os.name     Linux
    os.version     2.6.30.10-105.2.23.fc11.x86_64
    path.separator     :
    reserved_filenames     con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
    sqldev.debug     false
    sun.arch.data.model     64
    sun.awt.enableExtraMouseButtons     true
    sun.boot.class.path     /home/alex/prg/jdk1.7.0/jre/lib/resources.jar:/home/alex/prg/jdk1.7.0/jre/lib/rt.jar:/home/alex/prg/jdk1.7.0/jre/lib/sunrsasign.jar:/home/alex/prg/jdk1.7.0/jre/lib/jsse.jar:/home/alex/prg/jdk1.7.0/jre/lib/jce.jar:/home/alex/prg/jdk1.7.0/jre/lib/charsets.jar:/home/alex/prg/jdk1.7.0/jre/classes
    sun.boot.library.path     /home/alex/prg/jdk1.7.0/jre/lib/amd64
    sun.cpu.endian     little
    sun.cpu.isalist     
    sun.desktop     gnome
    sun.io.unicode.encoding     UnicodeLittle
    sun.java.command     oracle.ide.boot.Launcher
    sun.java.launcher     SUN_STANDARD
    sun.java2d.ddoffscreen     false
    sun.java2d.pmoffscreen     false
    sun.jnu.encoding     UTF-8
    sun.management.compiler     HotSpot 64-Bit Tiered Compilers
    sun.os.patch.level     unknown
    svnkit.sax.useDefault     true
    user.country     US
    user.dir     /home/alex/prg/oracle/sqldeveloper300434/sqldeveloper/sqldeveloper/bin
    user.home     /home/alex
    user.language     en
    user.name     alex
    user.timezone     CET
    windows.shell.font.languages     
    Extensions
    Name     Identifier     Version     Status
    ====     ==========     =======     ======
    Check For Updates     oracle.ide.webupdate     11.1.1.4.37.59.31     Loaded
    Code Editor     oracle.ide.ceditor     11.1.1.4.37.59.31     Loaded
    Component Palette     oracle.ide.palette1     11.1.1.4.37.59.31     Loaded
    Data Miner     oracle.dmt.dataminer     11.2.0.1.10.109     Loaded
    Database Connection Support     oracle.jdeveloper.db.connection     11.1.1.4.37.59.31     Loaded
    Database Object Explorers     oracle.ide.db.explorer     11.1.1.4.37.59.31     Loaded
    Database UI     oracle.ide.db     11.1.1.4.37.59.31     Loaded
    Diagram Framework     oracle.diagram     11.1.1.4.37.59.31     Loaded
    Diagram Javadoc Extension     oracle.diagram.javadoc     11.1.1.4.37.59.31     Loaded
    Diagram Thumbnail     oracle.diagram.thumbnail     11.1.1.4.37.59.31     Loaded
    Diff/Merge     oracle.ide.diffmerge     11.1.1.4.37.59.31     Loaded
    Extended IDE Platform     oracle.javacore     11.1.1.4.37.59.31     Loaded
    External Tools     oracle.ide.externaltools     11.1.1.4.37.59.31     Loaded
    File Support     oracle.ide.files     11.1.1.4.37.59.31     Loaded
    Help System     oracle.ide.help     11.1.1.4.37.59.31     Loaded
    History Support     oracle.jdeveloper.history     11.1.1.4.37.59.31     Loaded
    Import/Export Support     oracle.ide.importexport     11.1.1.4.37.59.31     Loaded
    Index Migrator support     oracle.ideimpl.indexing-migrator     11.1.1.4.37.59.31     Loaded
    JDeveloper Runner     oracle.jdeveloper.runner     11.1.1.4.37.59.31     Loaded
    JViews Registration Addin     oracle.diagram.registration     11.1.1.4.37.59.31     Loaded
    Log Window     oracle.ide.log     11.1.1.4.37.59.31     Loaded
    Mac OS X Adapter     oracle.ideimpl.apple     11.1.1.4.37.59.31     Loaded
    Navigator     oracle.ide.navigator     11.1.1.4.37.59.31     Loaded
    Object Gallery     oracle.ide.gallery     11.1.1.4.37.59.31     Loaded
    Oracle IDE     oracle.ide     11.1.1.4.37.59.31     Loaded
    Oracle SQL Developer     oracle.sqldeveloper     11.1.2.04.34     Loaded
    Oracle SQL Developer - 3rd Party Database Browsers     oracle.sqldeveloper.thirdparty.browsers     11.1.1.04.34     Loaded
    Oracle SQL Developer - DBA Navigator     oracle.sqldeveloper.dbanavigator     11.1.1.04.34     Loaded
    Oracle SQL Developer - Extras     oracle.sqldeveloper.extras     1.1.1.04.34     Loaded
    Oracle SQL Developer - File Navigator     oracle.sqldeveloper.filenavigator     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Antlr3 Translator     oracle.sqldeveloper.migration.translation.core_antlr3     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Application Migration     oracle.sqldeveloper.migration.application     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Core     oracle.sqldeveloper.migration     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations DB2     oracle.sqldeveloper.migration.db2     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations DB2 Translator     oracle.sqldeveloper.migration.translation.db2     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Microsoft Access     oracle.sqldeveloper.migration.msaccess     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Microsoft SQL Server     oracle.sqldeveloper.migration.sqlserver     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations MySQL     oracle.sqldeveloper.migration.mysql     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Sybase Adaptive Server     oracle.sqldeveloper.migration.sybase     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations T-SQL Translator     oracle.sqldeveloper.migration.translation.core     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Teradata     oracle.sqldeveloper.migration.teradata     11.1.1.04.34     Loaded
    Oracle SQL Developer - Migrations Translation UI     oracle.sqldeveloper.migration.translation.gui     11.1.1.04.34     Loaded
    Oracle SQL Developer - Object Viewer     oracle.sqldeveloper.oviewer     11.1.1.04.34     Loaded
    Oracle SQL Developer - Real Time SQL Monitoring     oracle.sqldeveloper.sqlmonitor     11.1.1.04.34     Loaded
    Oracle SQL Developer - Reports     oracle.sqldeveloper.report     11.1.1.04.34     Loaded
    Oracle SQL Developer - Scheduler     oracle.sqldeveloper.scheduler     11.1.1.04.34     Loaded
    Oracle SQL Developer - Schema Browser     oracle.sqldeveloper.schemabrowser     11.1.1.04.34     Loaded
    Oracle SQL Developer - SearchBar     oracle.sqldeveloper.searchbar     11.1.1.04.34     Loaded
    Oracle SQL Developer - Snippet     oracle.sqldeveloper.snippet     11.1.1.04.34     Loaded
    Oracle SQL Developer - Spatial     oracle.sqldeveloper.spatial     11.1.1.04.34     Loaded
    Oracle SQL Developer - TimesTen     oracle.sqldeveloper.timesten     2.0.0.04.34     Loaded
    Oracle SQL Developer - Tuning     oracle.sqldeveloper.tuning     11.1.1.04.34     Loaded
    Oracle SQL Developer - Unit Test     oracle.sqldeveloper.unit_test     11.1.1.04.34     Loaded
    Oracle SQL Developer - User Extensions Support     oracle.sqldeveloper.userextensions     11.1.1.04.34     Loaded
    Oracle SQL Developer - Worksheet v2     oracle.sqldeveloper.worksheet     11.1.1.04.34     Loaded
    Oracle SQL Developer - XML Schema     oracle.sqldeveloper.xmlschema     11.1.1.04.34     Loaded
    Oracle SQL Developer Data Modeler     oracle.datamodeler     3.0.0.665.2     Loaded
    Oracle SQL Developer Data Modeler - Reports     oracle.sqldeveloper.datamodeler_reports     11.1.1.04.34     Loaded
    PROBE Debugger     oracle.jdeveloper.db.debug.probe     11.1.1.4.37.59.31     Loaded
    Peek     oracle.ide.peek     11.1.1.4.37.59.31     Loaded
    Persistent Storage     oracle.ide.persistence     11.1.1.4.37.59.31     Loaded
    Property Inspector     oracle.ide.inspector     11.1.1.4.37.59.31     Loaded
    QuickDiff     oracle.ide.quickdiff     11.1.1.4.37.59.31     Loaded
    Replace With     oracle.ide.replace     11.1.1.4.37.59.31     Loaded
    Runner     oracle.ide.runner     11.1.1.4.37.59.31     Loaded
    SQL Developer Patch     oracle.sqldeveloper.patch     11.1.2.04.39     Loaded
    VHV     oracle.ide.vhv     11.1.1.4.37.59.31     Loaded
    Versioning Support     oracle.jdeveloper.vcs     11.1.1.4.37.59.31     Loaded
    Versioning Support for Subversion     oracle.jdeveloper.subversion     11.1.1.4.37.59.31     Loaded
    Virtual File System     oracle.ide.vfs     11.1.1.4.37.59.31     Loaded
    Web Browser and Proxy     oracle.ide.webbrowser     11.1.1.4.37.59.31     Loaded
    XML Editing Framework IDE Extension     oracle.ide.xmlef     11.1.1.4.37.59.31     Loaded
    audit     oracle.ide.audit     11.1.1.4.37.59.31     Loaded
    classpath: protocol handler extension     oracle.jdeveloper.classpath     11.1.1.0.0     Loaded
    jdukshare     oracle.bm.jdukshare     11.1.1.4.37.59.31     Loaded
    mof-xmi     oracle.mof.xmi     11.1.1.4.37.59.31     Loaded
    oracle.ide.dependency     oracle.ide.dependency     11.1.1.4.37.59.31     Loaded
    oracle.ide.indexing     oracle.ide.indexing     11.1.1.4.37.59.31     Loaded
    palette2     oracle.ide.palette2     11.1.1.4.37.59.31     Loaded
    status     oracle.ide.status     11.1.1.4.37.59.31     Loaded

    It doesn't sound like this is the answer in your case, but here is a problem I had with tree icons in 6i which took me a while to figure out.
    For some unknown and probably pointless reason, forms converts the tree query to uppercase before executing it. This can cause problems if the sql contains any hardcoded strings. In my case I was doing something like
    decode(status,1,'red',2,'green')||icon_name
    this resulted in REDicon when my icon was actually redicon.gif

  • Since OES 11 SP2 computer members of groups are not shown in AD Users and Computers mmc snapin

    I have several groups of computers in my DSfW Domain, They are mainly
    used to apply different GPOs to different groups.
    If you look via iManager or C1 at the properties of the groups you see
    the computers, which are members of the groups on the membership and
    security self equivalancy pages.
    If you use the MS AD snapin the memberlist of the group shows not any
    computer - but the computer(user) template shows, that the computer is
    member of the groups in question. It seems as if the GPOs are applied
    correctly using the group membership.
    But the question remains, why are the computer members not shown in the
    group template. They did show up there before OES 11SP2, so it seems
    some attribute got lost or is not correctly interpreted on the AD side.
    W. Prindl

    Originally Posted by W_Prindl
    I have several groups of computers in my DSfW Domain, They are mainly
    used to apply different GPOs to different groups.
    If you look via iManager or C1 at the properties of the groups you see
    the computers, which are members of the groups on the membership and
    security self equivalancy pages.
    If you use the MS AD snapin the memberlist of the group shows not any
    computer - but the computer(user) template shows, that the computer is
    member of the groups in question. It seems as if the GPOs are applied
    correctly using the group membership.
    But the question remains, why are the computer members not shown in the
    group template. They did show up there before OES 11SP2, so it seems
    some attribute got lost or is not correctly interpreted on the AD side.
    W. Prindl
    This might be the side-effect of some bug fix we did in oes11sp2, and will require deeper debugging. Please raise the SR with appropriate priority so that we give greater attention.

  • Module pool screen element not shown

    Hi,
    I have a module pool with table control.
    I have added a new field to the internal table and included it in layout-checked properties and it is active/shown in output and input enabled
    Also, when I checked in PBO debugging, loop at screen, when the screen element is this field, active/input/output = 1
    I have activated the program/generated it/logged off from system and logged in again (to take care of refreshing the screen)
    The internal table has values for this field.
    When I execute the screen directly instead of module pool program, field is shown in table control
    But when I execute the module pool program, this field and heading are not shown in table control but empty space allocated for this field is shown.
    May I know how can I resolve this.
    Thanks!

    Hi Vasu,
    Go through this [Sample|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/content.htm].
    Regards,
    Maruthi

  • Text frame not shown on windows server 2008

    I am facing the issue that on windows server 2008 the frame of a text fields are not shown. On windows 7 there is no issue. As example I have attached two screenshots showing that on windows 7 the frames for precision and scale are shown, but on 2008 not (additional info: the text field is there and can be edited).
    Do you know such an issue? Any suggestion how to solve it?
    Many thanks for your help
    Peter

    Hi,
    When you click the Plus sign next to a master page to create another master page, it doesn't inherit the objects from the master page. It simply creates a blank master page. If you want the new master page to inherit the objects, then right click the desired master page and select "Duplicate page".
    As far as child pages are concerned, yes, they should inherit all the objects and properties of the master page. It is really odd if its not happening for you. What happens when you right click the child page and apply desired master for that menu?
    Regards,
    Aish

  • Windows 7 64bit - Wallpaper is not shown

    First of all: sorry for my bad english (I'm from germany)
    My wallpaper on my Satellite L670-11R (Windows 7 Home Premium) is not shown. I can only see the backgroundcolor which I can also change although I have an image activated as the desktop background in the properties. When I shutdown my computer I can see the wallpaper for a short time and when I switch to another user I have no problems with it and I can change my wallpaper there.
    What can be the reason for this problem? How can I fix this problem.
    I'm looking foward to any answer.
    timon
    null

    I can understand you very well and I use my notebook on the same way. As background I use for months now just blue colour but anytime I want I can change any offered wallpaper.
    You must understand that such issues are not easy and it is always problematic to discuss on this virtual way. Best option for you is to talk with someone who has good PC knowledge and who can put your notebook on the desk and investigate a little bit what is wrong there.
    Here you can get standard answers only > check personalization settings and try to define different themes to see if anything will be changed.
    If you have some picture made by your digital cam saved on the notebook try to define it as wallpaper.
    Choose your desktop background > Picture location > Browse ...... go to certain picture.
    I use notebooks almost 14 years now and I have never heard about such problem. To be honest it will be interesting to have your notebook and see what happen exactly.

  • Quick Polls are not shown

    Hi,
    we have a problem with the quick poll functionality.
    After creating a qick poll and activating it, it is not shown in the user's start page. When editing the poll, the quick poll is shown in preview mode and it is also possible to do a voting.
    What can we do?
    Thanks in advance.

    Hi Thomas,
    check, if you Quick Poll is saved in the KM folder "/documents/QuickPoll". If it is not you have to change the properties of that iView for that startpage. Check also the name of the campaign in that iView and in the Quick Pole you have create that they are all the same.
    You can find it in the PCD under Portal User/Standard Portal Users/ Standard Userrole. Edit that role to check and to edit this belonged iView.
    Hope that helps,
    Frank

  • Some fonts are not shown correctly in LabVIEW 2012

    I found a bug related with fonts in LabVIEW2012 f3 KR.
    - When I select NI7SEG in font selection dialog, right font is not shown in the example box.
    - Draw text at point.vi shows same problem for some fonts while other fonts are working.
    I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google. 
    So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK. 
    * OS: Windows 7 32bit KR

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • IPC/VC: Knowledgebase/KB of ECC is not shown in CRM

    Hi,
    we would like to use the Variant Configuration in CRM.
    Today we are using already the IPC in a standalone environment with an external system (IPC 5.0, the external system is using the IPC in the Java environment of ERP). From the same ECC System we would like to download now the knowledge bases to reuse them in CRM 7.0. All knowledge bases and runtime environments are already available. When I download the object SCE (with certain filters), I can see all those entries in table COMM_CFGKB in CRM.
    Anyhow, when checking the material in CRM (e.g. commpr01 or WebUI), no knowledge base is shown!
    The table COMM_CFGKB has exactly the same entries as ECC (Active = T, KB Usage 10, KBOBJNAME and Version filled etc.), but anyhow it is not shown at all in CRM. As these knowledge bases are very huge, I have tested also a very small and easy one. This one is getting downloaded the same way and has the same entries in table COMM_CFGKB and it is also visible in commpr01.
    So my assumption is that the other KBs are not 100% correct. When checking them in ECC (cu36) I get many warnings and errors. Anyhow, they were downloaded to CRM (but won`t be shown). Business says that these warnings/errors are OK and that the external system which uses the IPC in ECC is not having any problems.
    Question: is there any chance of using a KB in CRM which has warning/errors when it was generated in ECC?
    Is there any chance of manipulating the KB before it gets imported into CRM. I have found Note 1044682 which explains a BADI.
    Which tables/fields do we have to manipulate so we are able to use the KB in CRM. 
    As mentioned: business is aware of those errors and excepts that there might be a crash in the IPC for certain combinations.
    Thx
    Guido

    Hi Christophe,
    OK, I think I understand your suggestion: you use the same IPC with your CRM as well as with the ECC system. So in CRM you just maintain the URL and a user in XCM to the "same" IPC. You mentioned that we need to download anyway the SCE. This is somehow logical as this is the base connected to CRM, but what is not clear to me is the fact, that if the SCE KB is used via ECC all SAP R/3 fields are available (like VBTYPE of the sales order where you have values like B or C). In CRM we use the same SCE KB but here these fields are not availble as the sales order transaction customizing in CRM does not contain such a field.  Where is the logical link between the values which are available in IPC and the SCE?
    Thx
    Guido

  • Voice memos sync not shown in iTunes

    I am trying to sync my voice memos to iTunes a couple of times. They are not shown. I haven't updated my iPhone 5s to the latest software yet. It's still running iOS 7; my iTunes was updated though. Does anyone have a solution for this?
    Thank you!!!

    You need to open iTunes on your computer. Then select music library from the left-hand. Then in the search window on the top right of the screen type in voice memo . The voice memo should now appear in the list is available music in the middle of the iTunes screen

  • Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

    Hello to all,
    we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
    Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really  be called a professional productive system at the moment...
    Ok., one thing after the other...here is one of our biggest problems:
    After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
    We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
    Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
    In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
    "Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
    We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
    We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
    We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
    Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
    Thanks in advance
    C.

    Hi William,
    thank you for your response.
    As you can read in my post I talked about CIFS/SMB.
    It makes no difference if we mount the share over CIFS or SMB.
    Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
    As mentioned I believe this is a timeout problem.
    Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
    Kind regards
    C.

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • Reporting tab is not shown in the console

    hi everyone
    the reporting tab is not shown in the service manager console, the topology i am using is 2 servers [one for DW and the other for management server] both servers have their SQL server installed on each one, could you please tell me how i can start to get
    this working or the steps i have to follow ?? isn't supposed to be working out of the box ? i have checked reporting services and they are running

    Probably your report server is not pointing to the DWDATAMART database, try login to:
    http://YourDWDatabase/Reports/Pages/Folder.aspx?ItemPath=%2fSystemCenter%2fServiceManager&ViewMode=List
    click on DWDATAMART Connection, under connection string, do you see your DWDATAMART DB name and server name?
    Antoine AL Ibry

Maybe you are looking for