ISSUE at the time of creating delievery.

hi guruus,
i am facing a serious issue and need your help.
I have created an order of a two materials "400000065 & 400000528" both material have stock available at FG '0004' storage locatioin and the material types are "Physican Sample".
when i am creating delievery of the order system is copying Zero delievery quantity for 400000065  but for 400000528 material system is picking actual quantity which was defined in order and also proposing the batches.
I could not understand that what is the problem i have defined both material on VCH1, Stocks are avaialble at MMBE in Unrestricted, there batches will be expire in 2010, there goods movement date is "31-12-2008"  order date is "26-01-2009" and delievery date is "26-01-2009'
when I am trying to enter a delievery quantity at the time of VL01N then system is giving an Error "Only 0 pac of material 400000065 is available".
when I am trying batch split then sytem is giving me message that  "Actual delievery quantity for item 00010 is 0, split is not necessary.

Hi
As the total open order stock is 37,779 and the available stock  is 455 only that is the reason when you where creating delivery system is giving message that only  0 PAC of material is available
So you have totally 3 open orders with that material So either confirm that open orders by having some additional stock  or close those sales orders and then you can do delivery for your present sales order
Regards
Srinath

Similar Messages

  • Issue At the time of Creating ASM instance through DBCA For 11g RAC  db :

    Hi,
    I have configured two node RAC with OEL5.
    I have installed below software successfully under different home locations.
    1) Clusterware :
    2) ASM
    3) Database
    I want to run ASM instance under separate home but when i am executing dbca from ASM home location to create asm i am facing a problem which is not traceable by me. Please help me if any body has any idea on it.
    Problem:
    Sometime(displayed below) ASM instance is running from node 1 and some times from node 2. At a time ASM in both instance is not in online state. At the end dbca is displaying ORA-01034: ORACLE not available. Please let me know what may be the exact reason for this.
    1) State 1
    Name Type Target State Host
    ora....SM1.asm application ONLINE ONLINE mac1
    ora....C1.lsnr application ONLINE ONLINE mac1
    ora.mac1.gsd application ONLINE ONLINE mac1
    ora.mac1.ons application ONLINE ONLINE mac1
    ora.mac1.vip application ONLINE ONLINE mac1
    ora....SM2.asm application ONLINE OFFLINE
    ora....C2.lsnr application ONLINE ONLINE mac2
    ora.mac2.gsd application ONLINE ONLINE mac2
    ora.mac2.ons application ONLINE ONLINE mac2
    ora.mac2.vip application ONLINE ONLINE mac2
    2)Name Type Target State Host
    ora....SM1.asm application ONLINE OFFLINE
    ora....C1.lsnr application ONLINE ONLINE mac1
    ora.mac1.gsd application ONLINE ONLINE mac1
    ora.mac1.ons application ONLINE ONLINE mac1
    ora.mac1.vip application ONLINE ONLINE mac1
    ora....SM2.asm application ONLINE ONLINE mac2
    ora....C2.lsnr application ONLINE ONLINE mac2
    ora.mac2.gsd application ONLINE ONLINE mac2
    ora.mac2.ons application ONLINE ONLINE mac2
    ora.mac2.vip application ONLINE ONLINE mac2
    With Regards,
    SNP

    Yes you are right , I have to make to sure stock budget doesn't get credited.
    If you remember in one of my other threads, i wanted to derive commitment item from Matl grp, it was for this purpose. I will derive commitment through matl group at the time of procurement / GR etc and assign a dummy commitment item to stock a/cs. Where as i will derive a consumption commiment item from consumption GLs.
    Thank you
    Chris

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Error in price at the time of creating SHC fro catalogue item

    Hi
    Cann anyone help me with the following problem.
    Error in price at the time of creating SHC fro catalogue item
    mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets).
    The system multiplies up the price by 10 & 10 and at that moment I transfer the shopping trolley it multiplies up again.
    The price for 10 pallets was gladly to be 32720,50 - Buttttttttttttt it turns into 3.272.050.
    Please help me in providing a solution for this
    Best Regards.
    sairam.

    Hi
    Please go through this ->
    Note 739562 Simplified pricing: Price 0.00 if catalog item.
    This is the standard system response as of EBP 3.5 Support Package 05 or Note 569275.
    This also depends on how you uploaded the price in the catalogs ->
    For price details you should use the following characteristics:-
    /ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code
    Perhaps you have to maintain field pricechangeable in BADi-InterfaceIF_EX_BBP_CATALOG_TRANSFER in method - ENRICH_ITEM_DATA. This will make sure you can edit the price_
    Other useful pointers ->
    Re: Price determination
    Re: free item shopping from catalogue....product with zero price
    OSS note 550071 - price for catalog product
    How to Upload Price details for a catalog in CCM 2.0
    Do let me know.
    Regards
    - Atul

  • Automatic Creation of primary key at the time of creating entries

    Hi All,
    I have a requirement to generate the primary key automatically at the time of creating entries. I have managed to do so by writing an event code for the maintainance object in SE54.
    However called only when I create entries throught the Maintainance View.
    It does not get called when I write an insert statement in the program.
    Please suggest a way to achieve this.
    Thanks in advance,
    Archana.

    for assigning the primary key while using insert statement, write a piece of code to get the last pk value, increment it by 1 and then assign this value to the pk field of the next record while inserting. if you are using a fn mod to insert values, just have this piece of code right before the insert query. a better way would be to use a GUID which will be unique globally. there is a fn mod GUID_CREATE which you can use to generate GUID. i don't think there is a way to automate this while making entries using se11, unless you change the code that actually creates the entry in the database.

  • Missed one letter at the time of creating account for icloud. how do i fix or create another email account?

    Missed one letter at the time of creating account for icloud. how do i fix or create another email account?

    Hi jtv123,
    Could you please tell us exactly what happens when you try to set up your account?
    With kind regards,
    David

  • Create document numbers of POs at the time of creating

    Hi gurus,
    has anybody experience with creating the document numbers of purchase orders when the POs are creating??
    I can change the purchase order number when the PO is saving or booking but at the time of creating?
    I tried the extensions:
    M06B0003 Number range and document number
    M06B0004 Number range and document number
    MM06E003 Number range and document number
    , but they doesn’t work.
    Thanks for your help.
    _janosch

    hi,
    This can be done by creating output type.
    In that output type you have to declare a program or subroutine name.
    Whenever you create a PO that output type will trigger,so the program also trigger.
    In that program you have to write code for creating document number.
    If its triggered PO document will be created.
    Thanks,
    vijay

  • Alternative BOM picking at the time of creating sales order.

    Dear All,
    I have on requirment and it is as follows.
    I have 3 alternative BOMS for one material in same plant.Now sales order is created for this materila which alternatibe BOM will system pick.
    If there any possibility to customise alternative BOM picking at the time of creating sales order.Please let me know what settings do I need to configure for this.
    Thanks for your support and time.
    With Rgds,
    Babu

    hi,
    this is to inform you that,
    1. since you have 3 alternative BOM's.  so by default system will pick up that BOM which is first according to hirearchy level at the plant level.
    alternatively if the same material is going to be used for different purpose (PRODUCTION OR PLANNING), SECOND ALTRENATIVE bom will be picked.
    2. you will have to assign the BOM which you want to pick add it to the picking list (ASSEMBLY OF THE PRODUCTS/COMPONENTS).
    in CO27 - maintain the range of components at component level with plant as same for which you have already created a BOM.
    create a sales order according - that alternative BOM will be directly assigned to the sales order.
    please check and confirm.
    balajia

  • Transport request  coming at the time of creating doc type

    Dear all;
    Here is a serious problem ,I am currently working in development server ,I was trying to create a new purchase order document type from Standard PO document type .after copid the NB i have done the required change ,but at the time of saving no transport request is cominmg it is direcly saving by the system.I have checked in IDES there it is coming fine.Whatmay be the problem?It is serious problem ,because I canot check in sand box due to I am unable to **** it to Sandbox .Please suggest.
    Thanking you;
    Joydeep Mukherjee

    Hi,
    Use T.code:SCC4, check whether development client setting done for not generating transport request!
    Here,select your development client and double click; system will take to new screen
    Now check u201Cchanges and transport for client specificsu201D Tab and select u201Cautomatic recording of changesu201D and save.
    Better consult your Basis Consultant for above.
    Regardsm
    Biju K

  • Cost Centre Derivation Issue at the time of PGI

    Dear Experts,
    At the time of Posting Post Goods Issue, SD Consultant is facing error that GL Account 6* requires assignment to a CO Object.
    According to my understanding, system should derive Cost Centre at the time of P.G.I through following logic :
    I have assigned Profit Centre : 999999 to the Cost Centre : ABCD and the said profit centre is being used at the time of Sales Order Posting. While doing PGI, system should derive cost centre data from Profit Centre Data which is used in Sales Order but currently system is not behaving like this.
    Another way is to assign respective cost centres against COGS Gls through T-Code : OKB9 which is not right I think. Because how can we map Cost Centre Data with Profit Centre Data in order to get Profit Centre Wise Profitability Reports?
    Please guide me any solution.
    Regards,
    Sapna

    Hi Sapna,
    For most cases, your COGS account should not be a cost element.
    Secondly, if you want to make it a cost element, you will have to maintain OKB9 for it, either on the basis of profit center or plant.
    System cannot pick cost center based on the cost center master data because there may be many cose centers assigned under the same profit center. There is no one-to-one mapping of cost center to profit center.
    I would suggest you do not make COGS as cost element unless the sale order is an MTO sales order or business insists on it.
    If business insists on it, then add the cost element to OKB9.
    BR
    Abhi

  • Profit center issue at the time billing  from SAP CRM

    Hi,
    we are using SAPR/3 4.7 & SAP CRM 5.0.
    we are creating service orders in CRM .
    After completion of service order we are doing billing due list & billing in SAP CRM. Then we are releasing billing document to R/3.
    Here problem is i dont have profit center field in SAP CRM for teh Service Product.
    at the time of the releasing teh billing document  system is picking teh dummy profit cenetr .
    But i need to post teh billing document  for teh respective profit center.
    Can you help some body.
    Regards
    Chandra

    See Note 386391
    The CRM Server is connected to an R/3 System that can be used to map Controlling and Profit Center Accounting. This note describes how the profit center is determined in the CRM integration.
    In the sales process and in service processing, the profit center is determined during the replication into the R/3 System and is stored in the translator.

  • Post goods issue at the time of complete shipment

    Hi Experts,
    Please let me know the configuration steps to do post goods issue in the complete shipment.  Appreciate your help.
    Thanks.
    with regards,
    Muthu.

    Dear Muthu,
    Please go through this IMG path then do the configuration settings.
    SPRO>Logistics Execution>Transaportation>Shipments>Define and Assign activity profiles, here you maintain variant name in the At completion colomun select your shipment document then click on Maintain push buton now system will take you to the maintain variant screen in that screen you can find the tab Post goods issue for the deliveries of shipment under this tab you put radio button for carry out goods issue posting during save, then save the variant.
    Now you create shipment document while saving the shipment document PGI will carry out for the deliveries which are avail in that shipment document.
    If you more details go through this link it will help you,
    http://help.sap.com/saphelp_47x200/helpdata/en/3d/42aa07074f11d2bf5d0000e8a7386f/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Automatic Clearing of Down payment at the time of creating Invoice

    Dear All,
    I have created a Service Purchase order. This is assigned to a WBS element.Then i created a vendor downpayment request against this order using F-47 then posted same from F-48. Then i created service entry sheet and accepted it.Now when i am creating a invoice in MIRO for this Service order, system gives an information message that Downpayment exists. But invoice amount is not reduced by the amount. Also downpayment is not reversed automatically. Is there any way to achieve this? I had to manually Clear downpayment after invoice is posted.I want that to happen automatically.
    Regards,
    Kamal

    Hi Rafi,
    Thanks for this information. We are running on ECC 6.0 / EHP4 & also the biz funtion activated. .
    As of now, we are receiving just an info msg at the time of MIRO.
    Is mere activation of this biz funtion enough or do MM & FI need to configure something to achieve automatic downpayment clearing?
    regards

  • Partition issue at the time of formating

    Every time I format my laptop, all the partitions of Drives merges to One drive..Why is this happening??
    At the the time of formating it doesn't shows partition create option. If I wish to format only the C drive,what I have to do??? I don't want any alter to the other drives at the time of formating. Please help me.

    Hi
    As the total open order stock is 37,779 and the available stock  is 455 only that is the reason when you where creating delivery system is giving message that only  0 PAC of material is available
    So you have totally 3 open orders with that material So either confirm that open orders by having some additional stock  or close those sales orders and then you can do delivery for your present sales order
    Regards
    Srinath

  • Status at the time of creating the portfolio assets and Inactvo

    Hi need you please inform me the functionality that is active or inactive status by creating a portfolio because the portfolio to create inactive allows modifications.
    You must perform some coniguracòn to allow the portfolio to create inactive status does not allow any modifications to change the statue to active
    Thanks
    Ann

    Hello
    Thanks for the response, per still do not understand which is the ability to handle the active and inactive status when creating a portfolio portaflio.Al create the inactive status but does not change the status can create new buckets and Items. Taking rather inactive status should not appraise modifying or creating buckets and items. Since the test was performed with a restrained but equally User defined allows the porafolio modficar.
    Greetings and Thanks

Maybe you are looking for

  • In the source list contract Number is  not showing up.

    On 10.11.2010 we added this Material 2211583 to contract 4600000149. When we do display source list it is still not showing up. Contract  4600000149  Validity Start  04.02.2008   Validity End    31.12.2009 We have changed validity End date for Contra

  • IMovie -- iDVD terrible quality

    I have a miniDVD created from an 8mm movie by a professional service - the quality is near the original. After creating a project in iMovie 11 and playing it full screen on an iMac 27, the quality is still acceptable. Then I share it to iDVD. The res

  • Customise Generated File "Reference.cs"

    We have the following setup. A VB6 application calls a .NET COM component that acts mainly as a forwarding system calling methods on a web service. When you open up the VB6 object browser and look at the methods exposed by the .NET COM Component, you

  • Adding css class styles to images

    I have a page template created with css that I would like to allow my users to add images, and based on the style selected, have the image appear to the left or right of the text. Is this possible? I see that when I insert the image into the page, it

  • How to select and reactivate NIESRKW.SYS driver manually for the SCXI-1600 in Windows XP

    Dear All I have problem's to select and reactivate SCXI-1600 driver in Windows XP SP2. First time when I installed Labview 8.5 and NIDAQmx 8.6 ( installed form the august 2007 media) so everything was fine and I made mesurements with my new SCXI base