Issue in Creating Activity in R/3 GUI

Hi All
I face an issue while creating an activity in Project System. When I click the Create --> Activity (intenal) in the menu in Project Builder, the system returns me back on the same page (Network Details page) and does not move further. (Same with clicking the Activity Overview)
I had already created two activities for a diffrent network, sometime ago - which got saved but later display the message on accessing - "Inconsistent data in activity ..". Also, I am not able to add any new activity in this network too.
Could you please help me know if I am doing something wrong or what the solution to this problem is ?
Regards
Sheenam

Hi Kalyan;
  You can define different number ranges in R/3 and CRM.
As per my understatnding number ranges maintained in R/3 is  0000000001-ZZZZZZZZZZ which is already exist in CRM.
You can try following steps
1. Define new number range ( as an ext no range)in CRM as per your requirement (which is not used in CRM)
2. create new groupings then assign number range in to grouping.
3. Then go to R/3 and change the number ranges for BP as a internal number ranges
4.Goto T.Code PIDE there select R/3 to CRM. and enter the mapping details with new number ranges then start downloading.
If helps reward the points.
Regards
Jameem Khan.
TTL Mumbai

Similar Messages

  • Date Issue while creating Activity using BAPI_ACTIVITYCRM_CREATEMULTI

    Hi,
    I'm creating an activity using BAPI BAPI_ACTIVITYCRM_CREATEMULTI and this is working fine. The only thing which is not reflecting in the activity is the date which I'm passing to this BAPI. The system  always puts the default date, which is system date.
    Below are the parameters I'm passing in DATE and DATEX parameters of BAPI_ACTIVITYCRM_CREATEMULTI. Let me know if I'm doing something wrong.
    Can someone help me? Any help in resolving this would be appreciated and rewarded with points. Thanks!
        lt_date-ref_handle = lt_header-handle. "handle for activity
        lt_date-ref_kind   = 'A'. "Adm header
        lt_date-appt_type  = 'ORDERACTUAL'. "Order actual date type
        lt_date-date_from  = '20060120'. "e.g.
        lt_date-time_from  = '1200000'. "e.g.
        lt_date-date_to    = '20060120'."e.g.
        lt_date-time_to    = '1200000'. "e.g.
        lt_date-show_local = 'X'.
        lt_date-mode       = 'A'."Create
        lt_datex-ref_handle = 'X'.
        lt_datex-ref_kind   = 'X'.
        lt_datex-appt_type  = 'X'.
        lt_datex-date_from  = 'X'.
        lt_datex-time_from  = 'X'.
        lt_datex-date_to    = 'X'.
        lt_datex-time_to    = 'X'.
        lt_datex-show_local = 'X'.
        lt_datex-mode      = 'X'.
        append: lt_date, lt_datex.
    Regards,
    Sandeep

    Hi,
    Here is a sample code for you.
    *& Report  YAM_TEST_CONT_END_DATE                                      *
    REPORT  yam_test_cont_end_date                  .
    DATA: lit_header_guid TYPE crmt_object_guid_tab,
          lit_appointment TYPE crmt_appointment_comt,
          lit_status_comt TYPE crmt_status_comt,
          wa_status_comt  LIKE LINE OF lit_status_comt.
    DATA : lit_ret          TYPE TABLE OF bapiret2,
           lit_obj_to_save  TYPE TABLE OF bapibus20001_guid_dis,
           lit_saved_obj    TYPE TABLE OF bapibus20001_object_id.
    DATA: lv_header_guid   TYPE crmt_object_guid,
          lv_item_guid     TYPE crmt_object_guid,
          lv_timestamp(15) TYPE c.
    DATA: lit_fname TYPE crmt_input_field_names_tab,
          wa_fname  TYPE crmt_input_field_names.
    DATA: lit_input TYPE crmt_input_field_tab,
          wa_input  TYPE crmt_input_field.
    DATA: wa_appointment      TYPE  crmt_appointment_com,
          wa_logical_date_key TYPE  crmt_date_logical_date_key.
    CONSTANTS: lc_end       TYPE crmt_apptype     VALUE 'CONTEND',
               lc_appt      TYPE crmt_fieldname   VALUE 'APPT_TYPE',
               lc_from      TYPE crmt_fieldname   VALUE 'TIMESTAMP_FROM',
               lc_to        TYPE crmt_fieldname   VALUE 'TIMESTAMP_TO',
               lc_obj       TYPE crmt_object_name VALUE 'APPOINTMENT',
               lc_tzone_from(13) TYPE c           VALUE 'TIMEZONE_FROM',
               lc_tzone_to(11)   TYPE c           VALUE 'TIMEZONE_TO'.
    PARAMETER: p_objid TYPE crmt_object_id.
    START-OF-SELECTION.
    * Get the HEADER GUID for the Contract Number
      SELECT SINGLE guid
        INTO lv_header_guid
        FROM crmd_orderadm_h
       WHERE object_id EQ p_objid.
      CHECK sy-subrc EQ 0.
    * Get the Item GUID for the HEADER GUID
      SELECT SINGLE guid
        INTO lv_item_guid
        FROM crmd_orderadm_i
       WHERE header EQ lv_header_guid.
      CHECK sy-subrc EQ 0.
      APPEND lv_header_guid TO lit_header_guid.
      APPEND lv_header_guid TO lit_obj_to_save.
    * Convert System date and time to timestamp
      CONCATENATE sy-datum sy-uzeit INTO lv_timestamp.
    * Setting Contract End Date
      MOVE: lv_item_guid          TO wa_appointment-ref_guid,
            'B'                   TO wa_appointment-ref_kind,
            'CONTEND'             TO wa_appointment-appt_type,
            lv_timestamp          TO wa_appointment-timestamp_from,
            lv_timestamp          TO wa_appointment-timestamp_to,
            sy-zonlo              TO wa_appointment-timezone_to,
            sy-zonlo              TO wa_appointment-timezone_from.
    * Filling the Input Fields for Appointment
      wa_fname-fieldname = lc_appt.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_from.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_to.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_tzone_from.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_tzone_to.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_logical_date_key-appt_type = lc_end.
      MOVE: lv_item_guid          TO wa_input-ref_guid,
            'B'                   TO wa_input-ref_kind,
            lc_obj                TO wa_input-objectname,
            wa_logical_date_key   TO wa_input-logical_key,
            lit_fname             TO wa_input-field_names.
      APPEND wa_input TO lit_input.
      CLEAR: wa_input, wa_logical_date_key.
      APPEND wa_appointment TO lit_appointment.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_appointment    = lit_appointment
          it_status         = lit_status_comt
        CHANGING
          ct_input_fields   = lit_input
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      CHECK sy-subrc EQ 0.
    * Saving the items alone
      CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
        TABLES
          objects_to_save = lit_obj_to_save
          saved_objects   = lit_saved_obj
          return          = lit_ret.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • How to create activity template for email campaign in CRM 5.0

    Hi,
    I tried attaching only a simple activity transaction type (Z005) to communication type email in SPRO > CRM > Marketing > Marketing Planning and Campaign Management > Campaign Execution > Define communication medium.
    After doing this, I was expecting that when I execute my campaign for channel email, emails will be sent to the customers and activity transactions of type Z005 will be created for each outbound email.
    Activity transactions are created, but I think I would like to maintain more details (description, responsible org etc.), which should be possible using activity template.
    I am struggling with creating activity template. I created a normal transaction of type Z005 and tried to maintain it as a template (which was obviously wrong), and the system gave me a message that I need to attach a template transaction of template type D.
    How do I create an activity template of type D?
    Any help would be appreciated.
    Regards,
    Kaushal

    Hi Kushal,
    As your are in CRM 5.0 you can create Activity template from SAP GUI. Just execute CRMD_ORDER and select your Activity type (ZOO5) and in Menu click on Extras->Template->Create  just enter required details such as (description, responsible org etc.)  save the template it will create Activity template number. While creating Email Campaign just enter activity template number.
    Execute Email Campaign it should create Activity with required details.
    Regards,
    Dipesh.

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Creating CRM 7.0 Activity from ISU SAP GUI (CIC0)

    Hello Guys!
    I need to create CRM 7 Activity from ISU SAP GUI cic0 screen using actiion box. Can any one please help me out what would be the best way calling CRM 7 activity from ISU SAP GUI, with my understanding the CRM 7 would not support sap gui and have to use webclient technology.
    My scenario: Creating activity in CRM 7.0 from ISU GUI.
    Existing process is creating an activity in CRM 4 from ISU SAP GUI, now business would like to move from CRM 4 to CRM 7. I need to find out or give suggestions to business what would be the best approach or solution to create CRM 7.0 activity from ISU point of as business would not like to use CRM WebClient screen to create activities. I need help on how i can suggest the busines.
    Please help me out as i am new to ISU and hope you have understood my requirements.
    Thank you in advance
    Regards
    shankar

    Hi ,
    Kindly use the Transaction launcher service using the Customization :
    SPRO > CRM > UI Framework > Technical Role Definition > Transaction Launcher > Configure Transaction Launcher
    SPRO > CRM > Interaction Center WebClient > Basic Functions > Transaction Launcher > Configure Transaction Launcher (Wizard)
    Kindly read help documentation next to it for details.
    Hope this helps.
    Regards,
    Anup

  • Error while creating activity by using BAPI

    Hi,
    While creating activity by using BAPI Im getting error as follows,
    Start processing of refference object handle generated.
    Integrity rule a d0008 broken
    business partner with function from vbkakom not vbpakom
    Integrity rule a d0008 broken
    edit all incomplete field .
    Please help me for solving this issue.
    Regards,
    Suresh

    Not received any proper reply Closing the issue.

  • How to set up meeting with sales employee & how to create activity in a emp

    Hi all,
    I have two scenarios to be configured for my client.
    1. Sales manager should be able to set up a meeting with his sales team in CRM. can any one give me a idea how we can configure it in SAP CRM & what is the transaction type (Business activity) to be used to setup meeting with employees.
    2. How to create an activity or task in employees calendar. where we configure calendar in SAP CRM, do we need to assign this calendar any where in order to create create activity for employees calendar.
    Please do let me know how to achieve the above scenarios.
    I got one more issue is that, I have created two transaction types (business activity types) 1 for transaction type for meeting with employee with category "meeting" in business activity and 2nd transaction type is for sending email to employees with category "email" in business activity. I have also assigned these transaction types to categories under sentings for activities ->assign transaction types to categories in SPRO. But I am not finding these two transaction types on UI under activities. If use different category for these transaction types like appointment then these are available on UI for activities. Please suggest me how to fix this issue too.
    Thanks in advance
    JM

    Hi JM,
    1. It depends how you want to configure this and your detailed requirements. One way would be to create an activity of type Appointment and from this, create a CRM E-mail activity that sends an e-mail to all the Attendees in order to setup the meeting.
    2. Synchronizing Activities/Tasks is done with the Groupware Integration. I'm sure you can find some documents in SDN for it, but for now you can take a look at the IMG node (Customer Relationship Management->CRM Middleware and Related Components->Groupware Integration) and the help.sap.com (http://help.sap.com/saphelp_crm70/helpdata/EN/47/09e1c4cc8d4861e10000000a155369/frameset.htm) page.
    The "New" button in the standard Activities Search will load everything under the "screen kind" ALLS, which means all Activities with Activity Class Appointment, Task, E-mail and Sales Call. You can see this in the method CL_CRM_UIU_BT_ACT_CUST_GET=>GET_ACT_CLASS_FOR_SCREEN_KIND. It is pure UI logic that you can influence if you make modifications or enhance the Appointment UI (for example the component BT126S_APPT, by changing the screen kind passed). You'd need to debug a little bit to understand the logic, however.
    Hope this helps,
    Kind regards,
    YZ

  • Err in creating Activit under tab Ext. Process using BAPI_NETWORK_MAINTAIN

    Hi Gurus,
    I need to create activity under tab Ext. Processing for a network and i am planning to use BAPI "BAPI_NETWORK_MAINTAIN" for this purpose. I am able to create activity under "Int. Processing" using this BAPI but got error for "Ext. Processing" tab.
    Below is the code i am doing for ext. processing tab.
    ****to move 3rd activity number for external processing
    itemsg-internal_object_id = '000004000873'.
    activity = '0030'.
    CONCATENATE itemsg-internal_object_id activity INTO v_str.
          MOVE  itemsg-internal_object_id+0(12) TO itactivity-network.
        MOVE '0030' TO itactivity-activity.
        MOVE 'Activity2' TO itactivity-description.
        MOVE 'PS02' TO itactivity-control_key.
        MOVE '5001-KOS-0061' TO itactivity-project_definition.
        MOVE '5001-KOS-0061-BA' TO itactivity-wbs_element.
       MOVE 'AA' TO itactivity-factory_calendar.
       move '2000' to itactivity-DURATION_NORMAL.
       MOVE 'DAY' to itactivity-DURATION_NORMAL_UNIT.
       MOVE '2000' to itactivity-WORK_ACTIVITY.
       MOVE 'Z0004' to itactivity-MILESTONE.
       MOVE 'M3'    to itactivity-UN_WORK.
        MOVE '099' to itactivity-MATL_GROUP.
        MOVE 'PGL' to itactivity-PUR_GROUP.
        APPEND itactivity.
        MOVE '000003' TO itnetmethod-refnumber.
        MOVE 'NETWORKACTIVITY' TO itnetmethod-objecttype.
        MOVE 'CREATE' TO itnetmethod-method.
        MOVE  v_str TO itnetmethod-objectkey.
        APPEND itnetmethod.
        CLEAR  itnetmethod.
    Below is the error message i got when i load this code.
    Enter a time unit, since you have entered either work or actual work
    Termination: Too many errors (more than 10% of methods)
    The order or network could not be saved
    Please help me to resolve this issue.
    Thanks in advance
    Ajay

    Hi,
    1)
    I would suggest declaring a structure of type BAPE_VBAP & BAPE_VBEP...Then move the values instead of using offset..
    Example
    DATA: S_BAPE_VBAP TYPE BAPE_VBAP.
    Populate the Extension structure WITH Order commited flag
    LW_EXT_STRUCTURE-STRUCTURE = C_BAPE_VBAP.
    S_BAPE_VBAP-VBELN = W_VBAP-VBELN.
    S_BAPE_VBAP-POSNR = W_VBAP-POSNR.
    S_BAPE_VBAP-ZZORDCOFL = W_VBAP-ZZ_ORDCOFL.
    LW_EXT_STRUCTURE-VALUEPART1 = S_BAPE_VBAP.
    This will make sure the BAPE_VBAP is extended with the Z fields..
    2)
    You are checking only for abort messages...You are not checking for error messages..
    Instead of this..
    READ TO CHECK THE ERROR AND ABORT MESSAGES DURING BAPI CALL
    READ TABLE LT_RETURN_TAB INTO LW_RETURN_TAB
    WITH KEY TYPE = C_MSGTYP_A
    BINARY SEARCH.
    Have this code..
    LOOP AT LT_RETURN_TAB WHERE TYPE = 'E' OR TYPE = 'A'.
      EXIT.
    ENDLOOP.
    IF SY-SUBRC = 0.
      WRITE: / 'ERROR'.
    ELSE.
      WRITE: / 'SUCCESS'.
    ENDIF.
    This will make sure there are no error messages..Also check the return table for error messages in the debugging mode..
    Thanks,
    Naren

  • Create activity and survey via 'CRM_ORDER_MAINTAIN'

    Dears,
    i am in CRM 6.0 now. i have decided to use FM 'CRM_ORDER_MAINTAIN' to create and change activity, also there is a import field named 'IT_SURVEY'. Now i want to batch upload the answers of the survey in a txt file to CRM and then create the survey and attach the survey to the activity.
    After check program 'CRM_SURVEY_UI' which also use 'CRM_ORDER_MAINTAIN' to create activity and survey, i found SAP will convert your input to a rawstring. But the convertion is based on the HTML container(class gr_survey_html), my case is flat txt file. How could i realize the convertion ?
    Any advice? I am so puzzled on this for a long time..
    BR.

    Hi,
    I have the same issue. Any suggerence with this topic?
    Regards,
    Mon
    Edit: It is solved. CRM_ORDER_MAINTAIN allows introduce a survey in an activity.
    Edited by: Mon on Apr 7, 2008 3:51 PM

  • Create Activity : result attribute is showing BTSubject is not bound.

    Hi,
    When we are creating activity we need to show two standard ddlb i.e., reason and result. with the help of configuration we added these two fields but only reason ddlb is showing list of values but result ddlb is totally non editable and when we are searching activities itu2019s showing BTSubject is not bound. How can I select correct field in configuration or is there any solution to enable this fields
    Reason ddlb technical information
    BT126H_APPT
    view : BT126H_APPT/ApptDetails
    context node : BTSUBJECTF
    attribute : STRUCT.CONC_KEY
    Result ddlb
    context node : BTSUBJECTG
    attribute : STRUCT.CONC_KEY

    Kumar,
    I suggest you search SAP Notes with keywords like 'BTSUBJECTG' and 'BTSubject is not bound'. There are quite a few issues about reason and result fields and some note must have already addressed this standard issue.

  • Creating activity failed

    Hi All,
    I am unable create activity while creating DC. I have NWDI Developer role it has the required UME Actions.
    So I thought to add privileges to the ACL.
    When I am try to add the permissions to the track as per following sap help link (Step 5) the permission is not getting added in the permission view. 
    http://help.sap.com/saphelp_nw04s/helpdata/en/08/83d93f130f9215e10000000a155106/frameset.htm
    Please help me to solve this issue.
    While loading the permission view i am getting the warning u201CResource for mountpoint was not found on repository: /dtr/ws/system/config/active/ACLs/u201D
    Precondition failed: Status: 403, precondition: access-denied
    [EXCEPTION]
    com.tssap.dtr.server.servlet.WebdavForbiddenException: Status: 403, precondition: access-denied
    at com.tssap.dtr.server.servlet.WebdavMethod.checkPrivileges(WebdavMethod.java:443)
    at com.tssap.dtr.server.servlet.GetMethod.execute(GetMethod.java:59)
    at com.tssap.dtr.server.servlet.WebdavMethod._runWebdavMethod(WebdavMethod.java:332)
    at com.tssap.dtr.server.servlet.WebdavMethod.runWebdavMethod(WebdavMethod.java:290)
    at com.tssap.dtr.server.servlet.WebdavServlet.executeMethodWithoutXMLMarshaller(WebdavServlet.java:135)
    at com.tssap.dtr.server.servlet.WebdavServlet.service(WebdavServlet.java:176)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Best Regards,
    Arun

    Hi Pascal,
    while Creating activity i am getting this error
    13:15:35.162  FAILED: Creating activity failed: act_w_EPSCRUM_nk_2e_com_EPSCRUM_dev_inactive_u_p2paavol_t_2008_05_26_10_15_34_GMT_cb9d11c8-cf17-4214-a6a0-b19ed2db8de8 - Forbidden [(pre||post)-condition failed: DAV:access-denied]
    Best Regards,
    Arun

  • Issues while creating implementation for BADI  "ME_PROCESS_PO_CUST"

    Hi Group,
    I have issues while creating implementation for  BADI "ME_PROCESS_PO_CUST".
    I tried to create implementation for the above mentioned BADI but, I was getting an error like this:
    "Interface implementation IF_EX_ME_PROCESS_PO_CUST does not exist".
    I want to implement this BADI and so, ideas/views at the earliest will be appreciated.
    Please let me know how to overcome this error.
    Thanks,
    Vishnu.

    Hi,
    Have you activated the class which is implementing the interface? (in transaction SE19 you should see class name)
    Best regards,
    Wojciech

  • Error in creating activity from Account application ( from activity tab)

    Hi Experts,
    We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.
    Thanks in Advance.
    Regards,
    Basavaraj Patil

    Hi Experts,
    We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
    Diagnosis
    You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
    System Response
    The follow-up transaction is not created.
    Procedure
    Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
    Pls suggest solution for this.
    Thanks in Advance.
    Regards,
    Basavaraj Patil

  • E-Recruiting - workflow created activity does not attach questionnaire

    Hi,
    I am wondering if this is "as-designed" behavior or if I have an error somewhere.
    I have a custom workflow that runs when the recruiter creates an interview activity. The workflow creates an "Interview Feedback" activity for the hiring manager. This is working fine except the questionnaire is not assigned to the activity. But if the recruiter creates an interview feedback activity manually, then the questionnaire is automatically assigned.
    The requisition does have a process template assigned, that assigns the questionnaire for the activity type. In the workflow I am passing the candidacy object as HROBJECT to the tandard "erc_activ.createfromdata" task.
    Has anyone else encountered this issue?
    Thanks,
    Margaret

    SAP HCM Consultant,
    Thanks for your reply. But I confess I don't completely understand.
    To create the activity, I am using the standard task TS51807961 in the workflow. This task uses the business object type ERC_ACTIV and the method CREATEACTFROMDATA. The binding looks like:
    Binding Workflow  -> Step 'Create Activity'
    Workflow
    Step 'Create Activity'
    9032
    &ACTIVITYTYPE&
    &ERC_ACTIV.ACTGUID&
    &REFERENCEACTIVITY&
    US
    &RESPONSIBLEOBJECTTYPE&
    &HIRINGMANAGER&
    &RESPONSIBLEOBJECTID&
    03
    &PROCESS&
    &HROBJECT&
    &HROBJECT&
    &EVENTDATE&
    &DUEDATE&
    '9032' is an activity type for a questionnaire type of activity.
    &ERC_ACTIV.ACTGUID& is the GUID of the interview activity.
    &HROBJECT is the PLVAR, OTYPE, and OBJID for the candidacy. The candidacy is assigned to a requisition which has the process template assigned. The process template assigns a questionnaire to the activity type 9032.
    When an activity of type 9032 is created for the same candidacy manually, in HRP5141 the field QA_TPL_OBJID is assigned the value 50004988. However when the workflow creates the 9032 activity as described above, HRP5141-QA_TPL_OBJID is blank, and so when the user accesses the activity they find there is no questionnaire attached.
    I am not sure how to use your suggestion to solve this problem. Can you clarify?
    Thanks,
    Margaret

  • Issue in creating OPSS Schema with rcu.

    Hi,
      There is an issue in creating the OPSS schema in oracle DB 11.2.0.3.0 even though the rcu (Oracle Fusion Middleware Repository Creation Utility 11g (11.1.2.1.0)
       completed it without any error with status of success opss schema at the end of it's creation operation.
          But the validation of opss schema is getting Failed as shown by this query ! I 've refferenced this Doc's Configuring the OPSS Security Store
    SQL> desc jps_dn;
    ERROR:
    ORA-04043: object jps_dn does not exist
      There is no error in rcu log And in opss.log as well.  Also There is NO issue in createing the Other schema's like OIM,OAM,OAAM
        Wonder what am missing here that causing the shema not reflecting or Validation of it getting Failed  in the database. 
         Also i 've tried by changing this sec_case_sensitive_logon value to False  from true in the DB but to no effect.
         in both cases the OPSS schema validation is getting failed. 
         Greately appreciate any suggestion.  
    Please see the following summary of rcu operation
    Repository Creation Utility: Create - Completion Summary
    Database details:
    Host Name                       : ebs.oracle.com
    Port                            : 1521
    Service Name                    : IAM.ORACLE.COM
    Connected As                    : sys
    Prefix for (prefixable) Schema Owners : DEV
    RCU Logfile                     : /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/rcu.log
    Component schemas created:
    Component                       Status  Logfile /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/opss.log
    Oracle Platform Security Services               Success        
      Please suggest.
    Thanks
    Priya

    Hi,
    Thanks for the response Hussein and Helios,
       I am able to solve the issue as it was due to incorrect rcu version.
      But I am really struggling to Configure Policy store for the last 10 days with the following  Error.  I would be highly obliged if you could guide me on this issue.
    I am getting stuck at this  Error while running configureSecurityStore.py.  for the error I 've refferenced these Metalink Note ID's
      But to No Avail.
    configureSecurityStore.py Fails With ORA-00001: unique constraint (DEV_OPSS.IDX_JPS_RDN_PDN) violated. (Doc ID 1547423.1) (1549203.1)
       Summarining  
       The steps that I 've followed
    1. Created the Schema's Using rcu 11g (11.1.2.0.0) on 11.2.0.3.0 Oracle DB. (OS :RHEL 64 bit)
    2. Insatlled Weblogic 10.3.6
    3. Installed   Oracle Identity and Access Management 11g (11.1.2.0.0) And  SOA 11.1.1.7.0
    4. Run config.sh to create OIM,OAM and OAAM domains
    5. Run setDomainEnv.sh from user_projects/domains//bin
      After that I tried to Configure the DB Policy store before starting the Admin Server. But getting the same error. every time it get  failed
    I 've dropped schemas and Reinstall the WLS,IAM,SOA software again But got the same Error.
      at least 20 times in the last 10 days I 've Dropped schema even created New DB and Reinstalled All the IAM Software But to No Avail
    Please see the  following Exact Error. And I would be highly Obliged if you could drop few lines as what I am missing here in the entire process.
    [oracle@ebs Middleware]$ /oracle/Middleware/oracle_common/common/bin/wlst.sh /oracle/Middleware/Oracle_IAM/common/tools/configureSecurityStore.py -d /oracle/Middleware/user_projects/domains/IAMDomain/  -c IAM -p welcome1 -m create
    CLASSPATH=/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adfscripting.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/lib/mdswlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/igfwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wls-trustprovider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/wsm-wlst.jar:/oracle/Middleware/utils/config/10.3/config-launch.jar::/oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbytools.jar::
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Info: Data source is: opss-DBDS
    Info: DB JDBC driver: oracle.jdbc.OracleDriver
    Info: DB JDBC URL: jdbc:oracle:thin:@ebs.oracle.com:1521/iam.oracle.com
    INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSetup - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    Sep 26, 2013 1:35:36 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
    INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
    INFO: Migration of Credential Store data in progress.....
    Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
    INFO: Migration of Credential Store data completed, Time taken for migration is 00:00:00
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  testJpsService - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  checkServiceSetup - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    Sep 26, 2013 1:35:41 AM oracle.security.jps.internal.config.ldap.LdapKeyStoreServiceConfigurator schemaCompatibleHandler
    INFO: Keystore schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  testJpsService - done
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  checkServiceSetup - done
    Sep 26, 2013 1:35:45 AM oracle.security.jps.internal.config.ldap.LdapPolicyStoreServiceConfigurator schemaCompatibleHandler
    INFO: Policy schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    WLS ManagedService is not up running. Fall back to use system properties for configuration.
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
    INFO: Migration of Admin Role Members started
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
    INFO: Migration of Admin Role Members completed in 00:00:00
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  testJpsService - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  checkServiceSetup - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.config.ldap.LdapAuditServiceConfigurator schemaCompatibleHandler
    INFO: Audit store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.audit.AuditServiceImpl registerInternal
    WARNING: Cannot register to audit service for component "JPS".
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
    INFO: Migration of Audit Store data in progress.....
    Sep 26, 2013 1:36:51 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
    INFO: Migration of Audit Store data completed, Time taken for migration is 00:00:50
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  testJpsService - done
    persist to output: /oracle/Middleware/user_projects/domains/IAMDomain/config/fmwconfig - done
    INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSetup - done
    Sep 26, 2013 1:36:55 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
    INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  seedSchemaAndCreateDIT - failed JPS-10000: There was an internal error in the policy store.
    Exception in thread "main" java.lang.RuntimeException: JPS-10000: There was an internal error in the policy store.
    oracle.security.jps.internal.api.common.JpsCredentialStoreLdapNodeCreationException: JPS-10000: There was an internal error in the policy store.
         at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:303)
        at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:113)
         at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.runConfiguration(LdapServiceEnabler.java:484)
         at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureCredentialStoreService(LdapServiceEnabler.java:232)
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureSecurityServices(LdapServiceEnabler.java:170)
         at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:129)
    Caused by: oracle.security.jps.service.policystore.PolicyStoreConnectivityException: JPS-10000: There was an internal error in the policy store.
         at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.handleRollbackException(JpsDBDataManager.java:1345)
        at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1508)
         at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransactionInDoAs(JpsDBDataManager.java:1475)
        at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransaction(JpsDBDataManager.java:1466)
         at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:296)
        ... 6 more
    Caused by: javax.persistence.RollbackException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
    Error Code: 1
    Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
         bind => [3 parameters bound]
    Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
    dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
    objectclass = top, EntryId = 11437:Attribute RowId = 45350
    objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
    cn = CredentialStore]})
        at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:102)
         at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:63)
        at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager$8.run(JpsDBDataManager.java:1487)
         at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1492)
        ... 9 more
    Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
    Error Code: 1
    Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
         bind => [3 parameters bound]
    Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
    dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
    objectclass = top, EntryId = 11437:Attribute RowId = 45350
    objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
    cn = CredentialStore]})
        at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
         at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:840)
        at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:906)
         at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:592)
        at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:535)
         at org.eclipse.persistence.internal.sessions.AbstractSession.basicExecuteCall(AbstractSession.java:1717)
        at org.eclipse.persistence.sessions.server.ClientSession.executeCall(ClientSession.java:253)
        at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:207)
         at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
        at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.insertObject(DatasourceCallQueryMechanism.java:342)
         at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:162)
        at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:177)
         at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.insertObjectForWrite(DatabaseQueryMechanism.java:472)
        at org.eclipse.persistence.queries.InsertObjectQuery.executeCommit(InsertObjectQuery.java:80)
         at org.eclipse.persistence.queries.InsertObjectQuery.executeCommitWithChangeSet(InsertObjectQuery.java:90)
        at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
         at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
        at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:844)
        at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:743)
         at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:108)
        at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:85)
         at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2871)
        at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1516)
         at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1498)
        at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1449)
        at org.eclipse.persistence.internal.sessions.CommitManager.commitNewObjectsForClassWithChangeSet(CommitManager.java:224)
         at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsForClassWithChangeSet(CommitManager.java:191)
        at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:136)
         at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3799)
        at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1415)
         at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitToDatabase(RepeatableWriteUnitOfWork.java:636)
        at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1505)
         at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitRootUnitOfWork(RepeatableWriteUnitOfWork.java:267)
        at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitAndResume(UnitOfWorkImpl.java:1143)
         at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:84)
        ... 12 more
    Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
         at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
        at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1044)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1329)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3593)
        at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3674)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1354)
        at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:831)
         ... 45 more
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.throwExceptionWithStackTrace(LdapServiceEnabler.java:145)
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:137)
    Error: Failed to initialize security store.
    Error: Create operation has failed.
    [oracle@ebs Middleware]$
      Also OPSS schema is FIne as it's get validated by this query.
    SQL>  select * from JPS_DN where rdn like '%cn=credentialstore%';
       ENTRYID
    RDN
    PARENTDN
          3004
    cn=credentialstore
    cn=oracleschemaversion,cn=opss,
          5004
    cn=credentialstore
    cn=jpsroot,cn=jpscontext,cn=iam,
       ENTRYID
    RDN
    PARENTDN
    Please suggest.
    Thanks
    Priya

Maybe you are looking for

  • Upgrading from IOS 12.1(1) to 2.1.(1)T or 12.2.

    Hi,12.1(1) does not support the the T1/E1 VWIC-1MFT-G703 module I was told an upgrade to anything above 12.1(1)T should solve the problem. My question is would I need to pay for this upgrade? Thanks ahead. cheers

  • HT1218 Link Mac notebook and Apple TV

    I purchased Apple TV yesterday . Ho to I procced to get the images onf my mac simultanesously  on the TV screen as i watch for example a clip on u tube     Thomas

  • What determines when the My Timesheet item will display in the Resource Availability Page?

    Can someone point me to where I can get more information on the My Timesheet item that displays in the Details section of the Resource Availability page?  I cannot figure out where this information is coming from or what determines how many My Timesh

  • Business Objects 4.1 Certification

    Hi All, I am preparing for the certification on Business Objects PLATFORM 4. with help of below documents. 1)BOE 320 : Business Object Enterprise XI 3.0/3.1 : Administering the server. 2)BOE 330: BusinessObjectsEnterpriseXI3.0/3.1:Designing and Deplo

  • BB Curve 8520 device detection problems

    Hi,       I've just recently re-installed my laptop (windows XP home) and I just re-installed the BB desktop software (5.0 - I cant figure my way around the latest version so I'd rather stick to what I know). The installation went smoothly. I install