Issue in init upload

hi all ,
i am getting this error message , while loading infopkg-init method
"@5C@     08.03.2011     10:49:10     No initialization with InfoSource
0CFM_INIT_POSITIONS and selection TR_ACC_CODE INFY/VALUATION_AREA 001
BWFS_TECHNICAL     3   "
i have checked several threads, and couldnt find any solution to this issue.
anyone who has faced this issue, can share the solution.

Hi all,
this init issue for 0CFM_INIT_POSITIONS is solved by deleting the entry of timestamp from SPRO, as mentioned in the document provided by Murali. thanks for the wonderful support.
now i am doing second step- init load from 0CFM_DELTA_POSITIONS.
i am getting time stamp error as below .
but i have tried replicating datasource and activating transfer rules as mentioned in ohter threads.
can anyone guide on this?
i got this error while loading init load to 0CFM_C10 from the 2nd flow, means via the DSO-0CFM_O01
DataSource 80CFM_O01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80CFM_O01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 12.10.2009 11:11:40.
The time stamp in the BW system is 30.09.2009 14:43:34.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.

Similar Messages

Recurring issue with mobile upload

Hi all,
Using Lightroom 5.6, I am experiencing ongoing issues with synchronising (uploading) LR to mobile devices. In brief, the upload will typically fail in mid-session with some collections partially or fully uploaded and some not started. (This may initially have been caused by going off-line during an upload), It will not recover. Deleting all uploaded data to prompt a restart does not help - it does not restart either.
Previously I have had to contact support and send the diagnostic report. Apparently there is a flag on the server end that needs resetting. Not the most satisfactory of solutions as it requires an action outwith the users control, but it does / did reset the file transfer interface. Apparently this bug was scheduled for fixing in the next up date. I understand I am on the latest (5.6) version , so does anyone know if this is still a bug?
Meantime, can support please reset my connection?
Regards .... Alastair

Hi Alastair,
I've contacted you privately.
Thanks,
Ignacio

Delta and Init Upload

Hello Friends
I have some confusion regarding the difference b/w delta upload and Init load.
Are they related to each other, if yes then how? Cant get a clear explanation for this.
Secondly, If i have loaded data into a cube from an ODS with request no for eg. R1 and other req no with R2. If after the successful request and data going into the cube..after some time i change the req. R1 status from green to red, will i be able to view the data in the cube coming from req R1?
Need ur comments
Regards
Rohit

Hi Rohit
Have quick look at the follwoing thread it was already discussed
Re: init delta
Re: Delta and INIT loads
Coming to your issue yes you are able to see the data bcz once the data is
suceesfully loaded in to the cube .it will maintain the data .It wont bother about
ods request..
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

CO delta extractors: How to delete single init uploads?

Hi Gurus,
i'm uploading COPA data with parallel initializations. I'm initializing data with different selections criteria, for example:
init for SOCIETY X - EXERCIZE 2008
init for SOCIETY Y - EXERCIZE 2008
init for SOCIETY Z - EXERCIZE 2008
init for SOCIETY X - EXERCIZE 2007
This works, but i'm not able to delete a single initialization: when i try to delete one in IP "Scheduler -> Initialization for this source" the system deletes all initializations.
Is somene able to help me?
Thanks
Piero

Thanks for the answer,
but so i don't understand which is the utility of the parallel initializations.
How can i reinitialize only a selected period instead of all COPA DATA ( millions or records to initialize) when in COPA runs transaction KEND???
Now R/3 is 4.6C version but we are migrating to ECC 6.0.
Thanks
Piero

Issues with file upload in flex mobile application (sharepoint as backend)

Hello,
I am working on flex mobile application for android platform for which we are having sharepoint as a backend.
(Flex SDK 4.6 and AIR 3.9)
Issue which we are facing is as follows:
We are communicating with the backend server using webservices: example:
<s:WebService id="kWebService" wsdl="http://www.kservice.net/kdatabaseservice.asmx?WSDL" >
            <s:operation name="AddPost"
                         resultFormat="object"
                         result="addPostResult(event)"
                         fault="postsfaulterr(event)" />
</s:WebService>
Above services are working fine but we are facing issue with one service which is related to file upload.
File upload for <10 MB is working fine but when we try to upload larger file on server it fails to process.
We are sending bytearray to the backend and backend code is writing those bytearray into file.
We have tried many ways to overcome from this situation. like we have checked configuration for file upload size on server , we have tried wcf services as well. Please help us on this criticle point as soon as possible
Thanks
Dhwani

Prashant8809 wrote:
Hi
>
> I have already gone through the video by Thomas Jung for multiple file upload but it saves the contents in server and not in >transparent table. So please suggest me alternative solutions.
>
>
> Regards
> Prashant Chauhan
What do you mean that my video saves the contents int he server and not in transparent table? I save the data into a temporary database table so it can be accessed by the parent WDA session. From there the WDA session can do whatever it wants with it. What do you mean by transparent table - that would be a database table. Do you actually mean internal table? if so, just read the data from the temporary database table into memory.

Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced

Hi Friends,
I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
Anyone have idea to solve this issue please kindly help me.
Thanks

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

Issues in displaying upload document link in publisher taskflow

Hi,
We are trying to do a feasibility analysis on the upload document feature of publisher taskflow, but are facing issues.
The Attach : File link is not getting displayed along with the publisher taskflow. The Attach: Link option alone is displayed.
Below are the steps i did to try out.
1. Created a new webcenter Portal application using JDEV 11.1.1.6
2. Created a new JSF file under /pages.
3. Dragged and dropped a publisher taskflow from Resource Pallete.
4. Set the username parameter to #{securityContext.userName}
5. Created an UCM connection in Application resources.
6. Deployed the ear to server.
7. Made sure the UCM connection is active in the EAR. (verified through Enterprise Manager)
8. To make sure the connection is proper, used a document presenter taskflow to display images from UCM in the same page
On running the application the publisher taskflow and the document presenter with images are getting displayed on the page. But the Attach: File is missing. Only Attach: Link option is available.
Am i missing any other configuration here?
Requesting help is solving this issue

Had to update adf-config.xml to have an try for <doclibC:spaces-repository> as below
<doclibC:spaces-repository
spacesRoot=<Name of the Root folder configured in the UCM connection for Spaces in the server>
adminUserName=<Administrator username mention in the UCM connection for Spaces in the server>
applicationName=<Name of the application EAR>
/>
This fix enabled the Attach : File link in the publisher taskflow

External List Management - Issue in File Upload and Map

I am facing problem while maintaining external lists through ELM and executing step upload and map file for a tab separated text format file.
The file data is getting shown properly in file preview through mapping format but when I execute it through external list the data is not getting uploaded at all.The log is not showing me any error or reason for the same.
I want to know apart from basic ELM config, is there some other configuartion required to enable ELM to upload and map the file in turn.
Message was edited by:
Pratyasha Shishodia

I got the resolution to this answer.
The issue was the task under ELM workflow was not marked for background processing and hence it was always in ready state and never proceeded ahead thru ELM transaction.All the steps due to this reason were shown in planned or ready state.
There was no error in ELM as everything in the system had no issues and hence nothing came in error log.

Slideshow issues with my uploaded site

I have recently built a website in muse and exported to html. I uploaded my website to my web host everything works...except all my slideshows are now up in my banner space in multiple web browsers such as: chrome, mozilla, safari and internet explorer. I did not have this issue when previewing my site, only after going live. How can I fix this?

I looked in Chrome, Safari and Firefox and it looks fine to me? Have you got it sorted out?

Issue in iNIT LOAD

Hello Gurus,
I have some problem with load,when i tried to trigger current year init infopackage i havs given 0 from 0 records,i n selections i have given C.Area:-1000 and fiscialyear/period:-000/2009 to 999/9999.please find the issue and give me solution
InfoPackage "Initialize Delta Load Current Year: 0CO_OM_WBS_6" has been updated in the BW dev client to load only fiscal year 2009 and later data. When we run it, however, it gets no records from R/3. We have verified in R/3 that project P2012 has over $2 million in actual costs posted in January of 2009.
Please provide me answer.
Thanks,
Reddy.

Hi,
Pls chk the status of the background job for the same load in sourcesystem...
Be in monitor window and follow the below path....
environment>job overview> in the sourcesystem...
give the user id details and chk the status of the job...
if it is in active then chk the log whehter the idoc's are generating there???
the load depends on this only...
rgds,

Issue with data upload

Hi
I am facing a problem in uploading data...problem is data goes upto psa but after that failes to go in DSO as there is some # character problem..
can anyone suggest something..
thanks in advance

Hi,
The issue is regarding special character,
If your load is through PSA,then you can edit the value in PSA to do this you have to delete the request from the target without making the QM status red otherwise it will not allow you to edit in PSA Then do reconstruction...ie push the request from the PSA to the target
Or
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Or,
Goto RSKC T-Code and permitt that Char
Hope it helps u,
Thanks & Regards,
SD

Issue with Delta upload in Extractor

Hi all,
We are using the Extractor 2LIS_11_VAITM to upload Sales Overview cube through Delta Process. It so happens that when ever a new record is entered (To be specific, whenever a new sales order is created) data is extracted and uploaded properly in to the cube.
But when an existing record is changed(existing sales order), the record is not being extracted to R/3 extractor (2LIS_11_VAITM) which means any CHANGED RECORDS are not being extracted as per the schedule.
Any hints to solve the issue would be helpful.
Regards,
Ram.

Hello,
Load is using Direct Delta or Queued Delta or Unserialized V3 Update ?
Is Data from InfoSource 2LIS_11_VAITM directly feeding the InfoCube or is into a ODS ? If it is directly feeding into InfoCube, do you have document number InfoObject in the Cube ? How are you checking whether existing data is been updated or not or new record arrived into your Cube ? Take any document # which you think got changed in R3 and check in the PSA too.
problem of not updating existing documents was always there or just happened today ?
GSM.

Issue in excel upload

Dear Experts,
I am trying to upload an excel file using Fucntion module ALSM_EXCEL_TO_INTERNAL_TABLE. Data is being populated perfectly into the internal table, when the records are being populated into the internal table I am getting a waring popup that whether I want to save the changes made to the excel sheet. I had closed the excel sheet when I am uploading the report.

Hi,
Not sure if you have kept the excel opened, but still try using this FM: FAA_FILE_UPLOAD_EXCEL which will internally call the FM which you have specified.
Hope your issue will be resolved using this FM FAA_FILE_UPLOAD_EXCEL
Thanks
Shiva

Issue with Image upload in DAM (changes the size)

Hi,
We are seeing issues with some of the .jpeg files dimensions getting chnaged when uploaded into CQ5.4. For e.g. I have an W-Training-Shoes-hotspot-1b-140x140.2.jpeg of140x140 dimension. When I upload it in CQ it saves with width=1600 & height=140. Did anybody saw this issue before?
If I copy the original file & resave it with 140x140 size & reload in CQ, it will load fine with width=140 & height=140.

It looks like the assets has wrong metadata. As a workaround add a process step right after "Metadata extraction" to the update asset workflow and have a script updates with correct dimensions.

FTP upload issues (failing to upload files 64k)

When I first got my Mac I used to be able to FTP large files to one of the several servers I use. This is now failing with 'Broken Pipe' errors, always at 64K of upload.
I have tried using both Cyberduck and YummyFTP but I get the same result on each. Could I have made a change to my OSX config to cause this problem?
Thanks in advance.

Here's some more information. The UK FTP server which Cyberduck etc work fine with has problems on the Terminal. Here's the Terminal output:
230 OK. Current restricted directory is /
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> bin
200 TYPE is now 8-bit binary
ftp> lcd ~/Desktop/
Local directory now /Users/Lylo/Desktop
ftp> put TestFile.pdf
local: TestFile.pdf
remote: TestFile.pdf
229 Extended Passive mode OK (|||30552|)
150 Accepted data connection
75% |**************************************** | 127 KB 0.29 KB/s - stalled -
This just times out.
Now, if I issue the EPSV command to turn off Extended Passive Mode, I can upload the file:
230 OK. Current restricted directory is /
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> bin
200 TYPE is now 8-bit binary
ftp> lcd ~/Desktop/
Local directory now /Users/Lylo/Desktop
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> put TestFile.pdf
local: TestFile.pdf remote: TestFile.pdf
227 Entering Passive Mode (85,13,252,5,221,6)
150 Accepted data connection
100% |*******************************************************| 170 KB 60.18 KB/s 00:02
226-File successfully transferred
226 3.503 seconds (measured here), 48.70 Kbytes per second
174673 bytes sent in 00:03 (48.66 KB/s)
Oddly, P4HOST.com uses Extended Passive Mode by default but turning it off using EPSV makes no difference. It stalls regardless.
Any ideas?
15" MBP Core 2 Duo 2.33 Mac OS X (10.4.9)

Issue in init upload

Similar Messages

Maybe you are looking for