Slideshow issues with my uploaded site
I have recently built a website in muse and exported to html. I uploaded my website to my web host everything works...except all my slideshows are now up in my banner space in multiple web browsers such as: chrome, mozilla, safari and internet explorer. I did not have this issue when previewing my site, only after going live. How can I fix this?
I looked in Chrome, Safari and Firefox and it looks fine to me? Have you got it sorted out?
Similar Messages
-
Recurring issue with mobile upload
Hi all,
Using Lightroom 5.6, I am experiencing ongoing issues with synchronising (uploading) LR to mobile devices. In brief, the upload will typically fail in mid-session with some collections partially or fully uploaded and some not started. (This may initially have been caused by going off-line during an upload), It will not recover. Deleting all uploaded data to prompt a restart does not help - it does not restart either.
Previously I have had to contact support and send the diagnostic report. Apparently there is a flag on the server end that needs resetting. Not the most satisfactory of solutions as it requires an action outwith the users control, but it does / did reset the file transfer interface. Apparently this bug was scheduled for fixing in the next up date. I understand I am on the latest (5.6) version , so does anyone know if this is still a bug?
Meantime, can support please reset my connection?
Regards .... AlastairHi Alastair,
I've contacted you privately.
Thanks,
Ignacio -
IE Scolling/Lag issues with IWeb Published Site
Has anyone had any issues with scrolling/lag with Internet Explorer on an iWeb published site? I have a site that runs great on Firefox and safari but terrible on Internet Explorer. I'm thinking it may be the template/design i used?
Anyone every seen this? Any suggestions?
Thanks,
JCI've only ever used the Modern Frame, so I can't say if there would be a performance issue using a different template. I have about three pictures on each page.
I noticed on your site that you're using the "reflection" effect on some of your pictures. Just for the purpose of testing, perhaps you could try turning off that effect and then re-uploading your site to see if that is causing some of the problem? I believe the reflection is rendered using javascript code, which may be causing the poor performance in IE. If that does turn out to be the problem, you can decide whether it's worth it to keep the effect or not.
By the way, I don't get that same error message in IE when I open your Videos page. Maybe it's caused by a security setting in your IE being set at a more restrictive level? -
Major DNS issue with my Partner Site PLEASE HELP...
As a a business catalyst partner my partner site is completely down and all my corporate emails have been erased. I built a new partner site using a business catalyst template and when I uploaded the new site to my partner site there were major conflicts with the default site-wide template and the files that I am unable to erase via FTP on the partner portal so the new template never fully worked.
So I moved on to Plan B - which was to open a new site as a "customer" under my own business catalyst account. Uploaded the files and the site worked, now when I tried to take my partner account domain name and transfer it to my newly created customer account I ran into a second even larger issue. It tells me the domain name already exists (as my partner domain) - please delete all files and try again (see screen shot for details.).
It will not allow me to erase the partner account under my partner portal as the "Delete Site" feature is not there for my partner portal (see screenshots for example).
Please help me straighten out this mess as my business site is completely down and all my corporate emails have been completely erased.I actually had the exact same problem. If you are a premium partner and rebranded unfotunately the domain name can't be moved because your customer sites are tied to that domain name.
So the only option is to create a new domain for your site. It sucks I know, but I can see why it has to be that way.
If you have not rebranded, then contacting support might be able to change that for you. -
I'm having a big issue with scripts and sites I need.
I am an Etsy shop owner and always been able to access my shop just fine all the sudden about three weeks ago I cannot log in to my shop on ff. I can view the Etsy site but when I try to log in it just loads and loads and will not let me. I know it is the script bc I added a script turn off add on and I could log on but Etsy will not let you have it turned off to edit items if your shop so I had to download chrome just to go to my shop which is annoying, I do not like chrome.
Other than that a few more sites like creative market and a few blogs will not load anymore for me. I have already re-set and that did not work. Also I get a lot of script not responding plugin popups that freeze and crash. This is really annoying. Does anyone know a fix? Thanks..You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
IWeb not opening after some issues with an existing site...
Hi there~
I’m a relatively new Mac user and a former PC/Dreamweaver user. I’m having a bit of an issue with iWeb. I’ll do my best to keep what happened relatively brief:
1. I had created and published a site a couple of months ago, but the page that contained photo albums seemed to have become corrupted. Every time I tried to open that page, iWeb would crash.
2. I recreated that page but then was not able to delete the corrupted version. So I recreated the whole site.
3. I published the new site, and everything seemed to be working well in the live version.
4. To avoid confusion in the future, I wanted to get rid of the old site. When I deleted that site, I saw that it said something about deleting it from the Web as well. I realized that this may cause problems because most of the pages would have the same names, but I was hopeful that since the new site had all of the pages I could just republish.
5. The new site did indeed get messed up after I deleted the old site. So I set the new site to republish, and then I got an error message.
6. I figured just for safety’s sake I would undo the deletion of the old site and just leave it for a while in the hopes that the new site would then work again.
7. After I did this, the old files reappeared, but then iWeb froze. (I think... My memory is a little fuzzy here...)
8. I closed and reopened iWeb, but all that appeared was that little right-hand box that lets you see the properties of certain things (Page, Photos, Text, etc). I also restarted the computer, and now when I open iWeb, that little box is still all that I’m getting.
I grabbed what I could from the live version and my history files so that I can recreate the site from scratch if I need to, so I’m not terribly worried about getting my files back. I did have another site created in iWeb that seemed to be fine, it would be nice to not have to start over with that one, but obviously I can if needed. Maybe those files can be found elsewhere on my computer?
So will I be able to get iWeb back? Do I need to reinstall it? If so, how do I do that? (Maybe that’s a question for another forum. iLife was installed on the Mac when we got it, I looked briefly for the files on the Applications CD but got a little scared off when I saw something about bundled applications...)
Thanks so much for any help. I called tech support and was directed here, this is new for me, so I hope I’m going about this in the right way. I’ll spend some time looking around to see if anyone has addressed this elsewhere, I just wanted to get things down while it was all relatively fresh in my head.
Thank you!
JenWelcome to the Apple Discussions.
. Every time I tried to open that page,
That sounds like the problem described here with potential fixes: iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2. This is another possible fix: The million dollar trick or how to fix iWeb in 10.6.2
OT -
Issue with frames-based sites in Sf-3(L); Looking for confirmation
Is anyone else having issues with Safari 3 (Leopard) and frames-based sites? Specifically, frame sizes not being obeyed?
For example, phpMyAdmin's left Navi frame is, in most themes, supposed to be about 180px wide; if need be, the frame is coded to show scrollbars (again, in all the themes I've used so far anyway).
However, Safari 3.0.4 on Leopard apparently ignores this and resizes the left Navi frame to an unusably narrow width (for reasons unknown - it's not the the right frame is especially full or anything), with no scroll bars either! However, the very same phpMyAdmin site works fine in Firefox 2, where frame widths show up exactly as they are supposed to.
Is anyone else having or can duplicate this issue?I've been having this problem for months, Safari 3 beta and now Safari 3 on Tiger as well as Leopard.
-
Issues with file upload in flex mobile application (sharepoint as backend)
Hello,
I am working on flex mobile application for android platform for which we are having sharepoint as a backend.
(Flex SDK 4.6 and AIR 3.9)
Issue which we are facing is as follows:
We are communicating with the backend server using webservices: example:
<s:WebService id="kWebService" wsdl="http://www.kservice.net/kdatabaseservice.asmx?WSDL" >
<s:operation name="AddPost"
resultFormat="object"
result="addPostResult(event)"
fault="postsfaulterr(event)" />
</s:WebService>
Above services are working fine but we are facing issue with one service which is related to file upload.
File upload for <10 MB is working fine but when we try to upload larger file on server it fails to process.
We are sending bytearray to the backend and backend code is writing those bytearray into file.
We have tried many ways to overcome from this situation. like we have checked configuration for file upload size on server , we have tried wcf services as well. Please help us on this criticle point as soon as possible
Thanks
DhwaniPrashant8809 wrote:
Hi
>
> I have already gone through the video by Thomas Jung for multiple file upload but it saves the contents in server and not in >transparent table. So please suggest me alternative solutions.
>
>
> Regards
> Prashant Chauhan
What do you mean that my video saves the contents int he server and not in transparent table? I save the data into a temporary database table so it can be accessed by the parent WDA session. From there the WDA session can do whatever it wants with it. What do you mean by transparent table - that would be a database table. Do you actually mean internal table? if so, just read the data from the temporary database table into memory. -
Slideshow issues with Lightroom vers 3.1
I tried to create a slideshow for a client using my previous version of Lightroom (2.7) but had issues with the selection of music to play in the background. Since I needed this slideshow asap I decided to go ahead and purchase the latest version (3.1) upgrading my older one. Well, to my dismal disappointment I spent the money and although I can now select the specific song..... when I playback the songs plays at 1/4 th speed ,,, just AWFUL !!! I know this issue has been talked about but I could not see if a solution so such was ever found ?? What is Adobe doing about it ?
... when I playback the songs plays at 1/4 th speed ...
Thaaaat shoould souuuund fuuuunnyyy... -
Issues with Facebook (Mobile Site)
I'm having issues with the Facebook App. I have the Blackberry 3G (9330) thru Sprint and I updated my Blackberry Software from 5.0 to 6.0. Since then, the Facebook (Mobile site) will allow me to type of up to around 20 characters when submitting my status or sending an email. Once it I type around 20 characters, the screen freezes and then it boots me out of the FB (Mobile site) and goes to the Bookmark page. I reinstalled that App thinking it may have not installed properly and may have affected the Facebook Mobile site but I'm still having the same problem. However, when I use the Facebook App, I'm able to update my status and send email using more than the 20 characters that's allowed in the Facebook (Mobile site). Is there something I can do to have this corrected? I like the mobile site better because I can see my friend's birthdays on the main page and it offers more options than the FB App.
Solved!
Go to Solution.After playing around with the settings, I found that if you have the "Assistive Input by Keyboard" under Options/Typing set to Predictive, it will interfere with any data that is keyed into the Facebook browser and cause it to freeze. I changed the setting to direct instead of Predictive and this resolved the issue. Thanks for your help!
-
Issue with Image upload in DAM (changes the size)
Hi,
We are seeing issues with some of the .jpeg files dimensions getting chnaged when uploaded into CQ5.4. For e.g. I have an W-Training-Shoes-hotspot-1b-140x140.2.jpeg of140x140 dimension. When I upload it in CQ it saves with width=1600 & height=140. Did anybody saw this issue before?
If I copy the original file & resave it with 140x140 size & reload in CQ, it will load fine with width=140 & height=140.
It looks like the assets has wrong metadata. As a workaround add a process step right after "Metadata extraction" to the update asset workflow and have a script updates with correct dimensions.
-
I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
Slideshow Issues with Fireworks CS3
Hello all,
I apologize in advance for this; I'm trying to fully take
advantage of all the software included in Creative Suite 3 Web
Premium. I've been using Dreamweaver and Photoshop almost
exclusively, and thusly haven't touched Fireworks until this
morning.
I thought it would be nice to have Fireworks produce a
slideshow for my website using the "Create
Slideshow" feature. I have all the images in a folder on
my desktop (my iMac desktop.) The album selector allows me to
choose that folder and uploads the pictures into the images window.
If I choose to create the slideshow and have the files exported
back to the desktop, it shows a nice progress bar and (pretends,
apparently) to write the necessary files.
However, that's all it does. Pretend. The filenames of the
images, when clicked in the images window, do not load previews
into the preview pane. The empty pane says "file not
found." And when I attempt to "preview in web
browser," Safari gives me a "file not
found" error. Sure enough, when I go back to make sure the
.swf and .xml files have been written, I discover they are not.
Fireworks behaves the same regardless of whether I use the
Flash-based or SPRY based players.
Since my problems were addressed verbatim in
this
thread, I made sure there were no spaces or capital letters in
either my folder or filenames (there aren't,) and Fireworks only
has to go as deep as my desktop to import and export the files it
needs/produces.
Please tell me I'm making some sort of newbie error. Since I
use Dreamweaver, I am making the (somewhat large) assumption that
Fireworks can work offline. That is, none of these files are
uploaded to my web server, nor is the finished product uploaded to
my web server. Is that the problem? I'm so very stumped right now.
Thanks,
~G~ (Ha. The forums censor my name.)Hi,
Not much I can do, as I'm not on a Mac and I couldn't get the
link (even
after I'd stuck the clipped bit back on the end) to work, so
couldn't get to
the 'history'.
Does this ...
www.fasterthanu.com
...work for you? If it does, will a peak at the code help
with your problem?
If not, if you'd like to zip up a few of the images you want
to create your
gallery with and specify the gallery you want, I'll have a go
at knocking
together a gallery for you. Then, perhaps we can establish
what's going
wrong from your end. Send any zipped files to peter (at)
fasterthanu. com
Peter
"Gayle Duncan" <[email protected]> wrote in
message
news:[email protected]...
| Hello all, I apologize in advance for this; I'm trying to
fully take
advantage
| of all the software included in Creative Suite 3 Web
Premium. I've been
using
| Dreamweaver and Photoshop almost exclusively, and thusly
haven't touched
| Fireworks until this morning. I thought it would be nice to
have
Fireworks
| produce a slideshow for my website using the 'Create
Slideshow' feature. I
have
| all the images in a folder on my desktop (my iMac desktop.)
The album
selector
| allows me to choose that folder and uploads the pictures
into the images
| window. If I choose to create the slideshow and have the
files exported
back to
| the desktop, it shows a nice progress bar and (pretends,
apparently) to
write
| the necessary files. However, that's all it does. Pretend.
The filenames
of
| the images, when clicked in the images window, do not load
previews into
the
| preview pane. The empty pane says 'file not found.' And
when I attempt to
| 'preview in web browser,' Safari gives me a 'file not
found' error. Sure
| enough, when I go back to make sure the .swf and .xml files
have been
written,
| I discover they are not. Fireworks behaves the same
regardless of whether
I use
| the Flash-based or SPRY based players. Since my problems
were addressed
| verbatim in
|
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=14&cati
| d=193&threadid=1269661 I made sure there were no
spaces or capital
letters
| in either my folder or filenames (there aren't,) and
Fireworks only has to
go
| as deep as my desktop to import and export the files it
needs/produces.
Please
| tell me I'm making some sort of newbie error. Since I use
Dreamweaver, I
am
| making the (somewhat large) assumption that Fireworks can
work offline.
That
| is, none of these files are uploaded to my web server, nor
is the finished
| product uploaded to my web server. Is that the problem? I'm
so very
stumped
| right now. Thanks, ~G~ (Ha. The forums censor my name.)
| -
Variations issues with User & Group Site Column value
Hi all,
I have created variation sites. e.g. http://mydomain/en-us for english & http://mydomain/de-de for german language. I have created custom page layouts. This page layouts are based on custom content types. I have created a column called "User"
which is type of "User/Groups". I am registering this column to my page layout. http://mydomain/de-de is my default site.
Now I am editing column called "User" on page & save it. It saves data properly. But when I am propagating these changes to another site that is http://mydomain/en-us. It shows me all controls with values filled. but with "User"
column, its showing me blank value.
Any suggestion. ?
Thanks in advance.http://webcache.googleusercontent.com/search?q=cache:kNlxGIj5f1kJ:sjoere.blogspot.com/2007/11/5-reasons-why-you-should-not-use.html+&cd=2&hl=en&ct=clnk&gl=in
Content types not propagated
Risk
When you add a content type to a page library in the variation source, this type is not automatically propagated to the other labels (see
my previous post). If you then create a page with that content type in the variation source, it does get published to the other labels but loses its content type field values.
Proposed solutions
Set up your site via a site definition that already contains the proper content type bindings to the page libraries. All labels will use the same content types
Put a good governance plan in place to make sure manual changes are done in every label
If this helped you resolve your issue, please mark it Answered -
Safari SSl Issue with Online Grading Site
I manage a department that offers grading of exams online. Users supply their answers and have the server grade the submissions.
We randomly have an issue where Safari users will have their exams graded incorrectly. Basically failing the student even though they have supplied the correct answers.
When we have them resubmit the same answers in IE for Mac the server correctly grades the exam.
This issue is not consistent. Some exams grade correctly in Safari and some do not.
Any advice would be appreciated.Hmmmm....
via MacWorld:
Nothing in Apple’s ridiculously minimal release notes suggested that this feature existed. But this time, the company’s intransigence in telling you what it has changed in the software you use may have further consequences. How Safari could “know” about these phishing and malware sites raises all kinds of interesting questions. Now we can tell you with reasonable confidence how it all works—but because Apple has not done the same thing, we cannot say with certainty that it is completely private, or that Safari is not sending information about the pages you visit to a third party.
Maybe you are looking for
-
Cannot Install Windows Updates on Server 2008 R2 - Error Code 80070002
Hello, I'm having issues installing updates among other issues that seem to be related. I'm not able to view a list of Installed Updates. Also Server Manager fails when it tries to list the Roles and Features on the server. I get this error message i
-
Can I make use of project created in myeclipse
HI ... I have done a project in J2EE(JSP) using MYECLIPSE editor. Now I need to do the same using JSFS . So I want to use the same project done in eclipse. Is there any way to import directly from eclipse. I have used APACHE TOMCAT 4.0 as a web serve
-
Speakers suddenly stopped working
my sounds suddenly stopped working. After talking to a couple of knowledgeable people, I uninstalled the Realteck audio driver, and then I had decent sound coming through the speakers ! This is for an HP desktop, a6750y So then I tried to re-install
-
Music and movie discs keep spinning in Mac and then freeze up my computer
This just started happening recently but I've tried to import several new CDs I bought into iTunes and the disc sounds like it starts spinning, then stops, then starts again, over and over and never actually doesn anything. Then I just freezes my com
-
Can't download OS X Lion on my comp during recovery.
My uncle gave me an old Mac Pro with OS X Lion on it. I had to wipe the whole system to delete previous owner data ad all of the files. It was full and working slowly and I didn't need any of it. Once I tried to donwload Lion again using recovery, it