Issue in Report RPAUD00 - Change Log

Dear Experts,
I want to execute the report RPAUD00, but the report output is completely blank. I searched on SDN for similar issues, and came to know that the following tables needs to be customised:
1. V_T585A
2. V_T585B
3. V_T585C
I have done the required settings in V_T585 A as below:
Unable to understand V_T585B. What will be entered in Field Group? And also, if I want to know changes done in all fields in a particular infotype, will every field be entered? can anybody please show me a dump of the table.
Also, in table V_T585C, does the values populate automatically after entering in the V_T585A and V_T585B tables?
Please help me for my queries.
Thanks and Regards,
Bhagyashree

Hi BN,
After configuration of these 3 tables, if any changes done in the Employee master data are seen in the Report RPUAUD00 / S_AHR_61016380. before changes will not appear in the report.
for your reference attaching screen shots.
585A
585B
585C
Regards.

Similar Messages

WBS Report Showing Change logs - ex: system status

Hi,
I would like to know if there is any report that would show the change log for AVAC for WBS Elements (i.e. change data of system status). I tried running CN60 but it does not give any results.
Thanks!
Vivian

Hi Sarang,
Thanks for your reply.
Would you know if there is any specific report for this instead of having to look up individually?
Also, in order to view the change document for both Project Definition and WBS Element, I understand there is some config that need to be done. Could you confirm if below are complete / correct?
- project profile - tick on change document (OPSA)
- Project Definition and WBS Element status profile (user status profile) - set business transaction to allow "create change document"
Thanks!
Vivian

Issue with Incremental migration - Change log data gone

Project Info :
We are migrating clients MOSS 2007 environment to SharePoint 2013 using Avepoint Docave migrator. It’s a migration and new development project where in client require new components and UI to be developed
Problem statement :
We had done last incremental migration of the data in August 2014 and when we tried doing the incremental migration in December it was found that “Change Logs”, based on which Docave does the incremental migration have been wiped out due to the Change log
duration set to 60 days by the client.
Docave support is saying that the only way to get the correct data is to perform full migration. As we have done lot of page fixes post migration, we want to avoid full migration.
Just for the information, Change logs refer to the "Event cache" table created for each content Database and the duration of the change can be set via
Central Administration > Application Management > select Web application > General Settings >Resource Throttling > Change Log
Any thoughts/approach on how shall we proceed to tackle this situation
Regards,
AMit

Hi,
As Avepoint Docave migrator is a third party product, I suggest you can contact the corresponding support for help.
If you want to migrate MOSS2007 to SharePoint 2013, I suggest you can follow the article below:
http://technet.microsoft.com/en-us/library/ee947141(v=office.15)
Best Regards
Jerry Guo
TechNet Community Support

Report on Change Logs

Hi Guys
Is there a report/transaction in SAP where I can view all the changes that have occurred on the Customre/Vendor master data... other than the XD04/XK04..
Thank you
Rukshana

Hiya
And what help would that be?
i can execute the tables cdpos & cdhdr but I need this infomation for the users to run at day end...
Rukshana

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

OB52 change log report

Hi,
I have a requirement where i need to to copy the standard report RSVTPROT Evaluation of Change Log (OB52 Transcation) to custom report and change the layout format to ALV . When i looked into the standard report the report RSVTPROT is being called using submit report passing the object (Table/View). Could any of them worked on this issue please let me know other than the table t001b/V_too1b is being passed as object while calling the report.
If it is possible to change the layout to ALV report can u guide me on the same.
Regards,
Ravi

Hi
No Standard report is available in SAP

SAP Report RSVTPROT: Evaluate Change Logs

Is there a similar report that anyone knows of to evaluate change logs? A report where you can enter a user name or user range, and a range for table names?
Or has anyone customized the SAP logic to do this?
We have a very old customized program from this but looks like because of advancements in change log processing we are having a lot of new issues with it.
Thank-You.

Hi,
Perhaps you can write custom program to access directly table DBTABLOG which contains all records for table log (very huge table)
Also check FM DBLOG_READ_TABLE for logic to access.
Regards,
Ferry Lianto

Change Log issues - Post Upgrade

Hi Experts,
We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
Thanks and Regards,
Jay

HI JayaPrasad,
Chek the note : 1059171 which is related to Change log,
I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
Regards,
Srinivas

PO change log report

Dear experts ,
Do we have any standard report that would give the details of PO change log . I do not want to open the PO document & check for its change log , but want a report with multiple pos as input & corrsponding changes as o/p .
Regards
Anis

Hi there
STD transaction (end user level - front end- t code) we dont have it,, but through SE16/ se16n you can see it,, (table level)
Go to the transaction - SE16/SE16n
Table-CDPOS
Max no of hits- "BLANK"
in the object values enter the PO ranges ex- 4500017000-4500018000 (or leave it blank)
Execute it,, you will get the list of changes,,
Ref the below link for more details
http://www.sap123.com/a/47/#
Hope it helps
Thanks
Senthil

Change log report S_AHR_61016380 not picking IT0025

Hi Experts,
I need the change log report to capture the details of changes made in IT0025 (Appraisals).
I have made necessary configurations to the below tables by watching in other SDN threads, but still my problem is not solved.
Also made changes to master data (IT0025) and tested, but still no use.
Log report is not picking changes made to IT0025.
Please suggest
Thanks
Venkatesh

Dear Expert,
for logged changes in infotype report we need to install crystal report.
please suggest.

User change log report in Console

Dear Experts,
We have one audit requirement. We need u2018change logu2019 for useru2019s role modification.
I checked in console logs. I found the log for delete user & modify user. In case of delete user it is giving details which are the users had been deleted. But in case of role modify in user, it is not giving which are the users had been modified or which newly role had been assign.
We need change log report from MDM console.
Regards,
Gaurang

Hi Gaurang,
<repositoryAdmin><role action="modify" id="2"><functionRight>
<function>16777216</function><access>1</access>
</functionRight></role></repositoryAdmin>
In this case the role with ID 2 has been modified. The authorization with ID 16777216 (see function ID map below) has been set to 1 (Execute).
Below this section there is one table with function ID and Description.
Here in case of change in functions Tab
<access>X</access> will tell u if the function is set to Execute or None:
Legends:
Execute:1
None:0
and which function u will get from <function>16777216</function>
For decoding the function id there is a table given in section 4.2
and if there is any change in the table and fields tab:
then log will be as follows:
<repositoryAdmin><role action="modify" id="5"><objectRight> <object>1</object><type>0</type><access>2</access>
</objectRight></role></repositoryAdmin>
where access will tell u if its Read Write(3) or Read Only(2)
Which table u will get from <object>ID</object>
Now this role ID and Table ID is the Index values which u can get using API.
Try to write an api which will extract the Table ID ,Field ID and Role ID information in an Excel this u can use as reference the decode the Log.
Regards,
Neethu Joy

Route Change Log Report

Please advise how to sort out change logs of route on existing order lines from tables SE16 CDHDR/CDPOS. Since there's no available tranaction Code \ Report for user to track change history.
If any other solution available, please advise it as well.
Thanks in advance!
Regards.......

Dear,
Thanks for your quick reply, I know that we can see this in VA02, I have a set of 200 Sales Orders, Now the Question is :
Is there any report \ Tcode where I can see all the changes made in the routes at a time?????
Hope you understand the question.
Regards..................

Does a Master Data Change Log or Report Exist?

Does anyone know of a master data change log or report?
Such a log or report would show all changes made to cons units, cons groups, and items; including additions, deletions and changes to a hierarchy.
We hope to use this to synchronize cons group/unit and item hierarchies between BCS systems: Production and Development.
For example, if a master data change was made in the Production system, we would like to log the change, and synch this change back to the Development system.
Thanks for any insight.

Thanks, TheScotsman, for really helpful information!
Some detail of the findings for those who interested:
There is a "How to... trace changes to master-data and settings for SEM-BCS" which describes all nuances of tracking changes in MD.
The HowTo mentions the reports RSVTPROT , UGMD_DB_LOG_DISPLAY, and a t-code SCU3 that may show the changes.
Certainly the code of the reports might be taken as an example for writing your own code.
Though, the reports and the SCU3 are useful when the logging of DB tables changes is activated.

Reporting on ODS (Change log Table)

Hi,
Can we do Reporting on ODS (Change log Table) that can give me the detailed transactions (invoices, cancellation etc) that is stored in the change log table.
If we can do reporting on the change log table, how can that be done? Please Help!
Thanks,

Hi Bharath,
See here:
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/content.htm
You can use a database table as the source of data:
http://help.sap.com/saphelp_nw04/helpdata/en/02/cd0b405bacdd5fe10000000a155106/content.htm
And store in an ODS:
http://help.sap.com/saphelp_nw04/helpdata/en/30/1d09407448c442e10000000a1550b0/content.htm
Hope this helps...

Change log issues-2 images for a single requests

Hi ,
in change log table for a single request i found 2 before images and two after images, is this normal behaviour if not when can we see the such type of scenarios.
because it leads to zero records when it isn updated in to the further data targets.
thanks.

the listener is NOT involved with any existing session.
stopping & restarting the listener has NO impact on existing sessions.
I suggest it is better to control network access to any system using a Firewall which is the best tool for this task.
Yes, it is possible to have more than 1 listener. It is also possible to poke yourself in the eye with a sharp pencil.
I suggest that you should avoid both of these possible activities.
Simply put having multiple listeners is wrong for multiple reasons & should be avoided.

Issue in Report RPAUD00 - Change Log

Similar Messages

Maybe you are looking for