Issue printing from laptop to my Officejet 6500 709n.

I bought an Officejet 6500 709n printer to run on my home network. I have it connected via USB to my desktop HP running Vista 64bit. This computer is connected to my router(Linksys WRT320N)  via ethernet cable. There is also another HP computer connected to the router via ethernet as well. I shared the printer after installing(which went off without a hitch) and it prints fine from both computers. My Sony Vaio(Vista 64bit as well) is connected to the network wirelessly. I can see the printer on the network, but when i try to print it takes a loooooong time to print. a few minutes goes by before it even acknowledges the printing.
 This printer is a replacement for the PSC 950 all in One and everything worked fine before.
Thanks in advance.

I am sorry but at least you are not alone.  There are many people experiencing this problem (search this forum for '6500' and you will see pages and pages).  I have tried to help many of them to no avail.
I am hoping that the engineers are working hard on this and that there will be a firmware update soon.  Sorry. 
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Reinstallation printer driver- Wizard stalls - HP officejet 6500 709n and Windows 7

    After windows 7 auto update of my driver, printer offline became its status. I uninstalled the driver, downloaded a new one and ran installation wizard. System checked, system prepartion were successful, but configurate product is stalled on 2/9 with printer not responding message. Any ideas about how I might proceed?

    Hello supernumerary, and wecome to the HP Forums!
    I see you are running into issues with your install. I would like to assist with that today.
    First thing I would suggest would be to stop the installation. Once it has been stopped, I would recommend uninstalling any residual software that was put in during the failed install.  I am including a document on Uninstalling the Printer Software in case you run into any issues.
    Once the printer is uninstalled, I would recommend following through this document on Wireless printing center Troubleshooting Issues to ensure the printer wireless functions are still connected.
    Once the printer is verified to be online, and the old software is completely removed, I would suggest restarting the computer and reinstalling the software using the HP Printer Install Wizard for Windows.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Failed to issue print from win7 laptop to Canon MP230 which is connected to mac mini os x 10.8.3

    HI
    I have recently bought a Canon MP230 printer and connected to my Mac Mini 10.8.3 usb port.
    To setup the printer I downloaded the latest driver from canon web site and install all of them
    When I issue print from my mac mini it works fine.
    Next step was to issue print from Windows 7 laptop .
    To do that I intalled Bonjoure in my Windows 7 latpot and set the printer connected to MAc Mini as default printer.
    Upto this point every thing works fine.
    When I tried to issue print from my Windows 7 laptop the printer gets activated the power button start blinking . But it just pass a page from
    input tray to out tary without printing  a single line. I have looked into cups server page at my mac mini. It shows that the job fired from windows
    laptop was done.
    I treid a lot debug it myself . But no luck yet.
    Please help me. I am very upset.
    Thanks
    Anirban

    I just updated to 10.8.3 today, and my computer and Apple TV won't even recognize each other now.  I have absolutely no advice, but wanted to throw this in so you (and Apple) know you're not the only one. 

  • How do I get the printer driver for a hp officejet 6500 e709n?

    How do I get the printer driver for a hp officejet 6500 e709n? When I add the printer, Apple says the software is not available and to contact the manufacturer. HP says it is available from Apple.

    Hi Robmtu,
    You can find the direct download here.

  • Print from laptop wirelessly to hp4630

    My HP 4630 officejet has been printing nicely wirelessly from all of my laptops and devices; since my password via: my internet provider has changed, the printer is not connecting wirelessly to print from laptops; I've done the wireless wizard with new password but still no connection; I've troubleshooted, disconnected everything and have spent hours to fix this problem! I'm frustrated and ready to return printer to store. (

    Remove your password from your SSID and see if it connects with no password.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router

    HP PAvilion dv1000, Windows XP
    Would like to print from laptop to printer at home.  Printer is ethernet connected to NetGear Router.
    I had been able to print wirelessly from laptop to HP 7310 Officejet all-in-one, but now all I get is "document failed to print" message.  I can get documents to print on this printer using my smart phone, but not the laptop.
    I have used "find printer" button on print screen and can see the printer to select.
    Any suggestions?
    This question was solved.
    View Solution.

    Figured it out after looking at a few other posts...
    Configured port to printer IP Address and now it is printing perfectly.
    Thanks for having posts out there to review.

  • OfficeJet 6500 709n and MicroSoft Office 2010 duplex print problem

    I have an OfficeJet 6500 709n and was able to automatically duplex print with Windows 2003 no problems.  I upgraded to Windows 2010 and now it won't see the automatic duplex printing.   I can only select single page printing and manual duplex printing.  Any ideas what I need to correct????  HELP PLEASE!!

    Hello,
    Make sure the Automatic Duplexing option is enabled:
    Enter Control Panel > Devices and Printers.
    Right click the printer icon, then click Printer Properties.
    Click the Device Settings tab.
    Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
    Now Automatic Duplexing should become available.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Peachtree Classic 12 Issues printing from PDQ

    This is a long-shot but I am looking to see if anyone has any knowledge of Peachtree Classic 12. We have a user that does accounting through Peachtree Classic 12 which resides on a Windows 2000 VM running on VMWare Workstation 11. Every so often she has issues printing from the PDQ module it where it will either not print at all or print in a way that data doesn't fit on the page and gets cut off. Usually we can get it to print again by messing with port settings, power cycling the printer, etc. but what I am stuck on right now is getting it to fit all the data on one page. There is something in the PDQ Printer setup about compression codes and setup codes but I am not sure where to find the correct codes that will compress the data output so that it fits on one page. Any help would be appreciated.
    This topic first appeared in the Spiceworks Community

    I had a similar issue. Are the fonts on the pages the same or do they differ?
    My issue was a font, check that.

  • Hp officejet 4500 wireless won't print from laptop. It is connected to laptop.It prints from desktop

    We have a HP Officejet 4500 wireless printer which was first installed in 2011 without any problems. We also utilize a HP LaserJet P1006 printer (not wireless) with our network. I cannot print from my laptop to either printer, but hubby's desktop has no problem. Both printers stopped working for my laptop at the same time. Everything worked perfectly until a few weeks ago when I could no longer print directly from my Dell Inspiron laptop. When I check on the connectivity of both printers to my laptop, the information tells me the printers are connected to my laptop.
    My husband has a Dell desktop (our main computer).
    I have tried everything I know to fix this problem, including shutting down the desktop, my laptop, the router, and the printers (including disconnecting the printers from the desktop with the cords that connect to the printers). I have followed all instructions on how to restart the entire system...plug the router in, plug in the printers & turn them on, and lastly restart both computers.
     I am not what one would call "computer savvy"; as a matter of fact, I am quite computer-challenged. If any of you can tell me in extremely-easy-to-understand language what to do, I would appreciate your help.

    Hi,
    Pleae download and run HP Print and Scan Doctor utility which should resolve most of printing issues.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-106151-2&cc=us&dlc=en&lc=en...=
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How To Print Full Size 8x11 on officejet 6500

    I just bought an officejet 6500. I want to print a picture full size. It's 8x10.5in. I select 8x11 paper. Best resolution and all just like I did on my old hp, but when I print, it resizes to 3x5 (my guess). Why is it doing this? How do I get it to stop. This should be simple. The resolution is about 97dpi. Does that have anything to do with it? I printed the same photos the way I wanted on my old printer. If I printed this exact printer on my old printer, it would print full size. And how I get it to use the printer as the default and not the fax. I'm not even using the fax. I have to select the printer every time. I'm on Vista by the way.

    It turns out that I can't seem to print the way I want from Photoshop CS3. Other applications seem to print OK. I can print without any issue if I use Corel PhotoPaint. But if I try to use Photoshop, it prints a small picture no matter what setting I seem to pick. Unfortunately I mostly use Photoshop to print. I could print using HP Essentials, but there doesn't appear to be any way to custom size what I want to print in that program.

  • How to print from laptop to HP J6480 All-in-One using bluetooth?

    I have a laptop with Vista that is not wired to a printer, but I do have a J6480 in a near room that is hardwired to my desktop.  Both the laptop and printer have bluetooth.  Can I print from my laptop to the printer using bluetooth as the link?
    If so, how?
    I briefly tried but when I tried to search for a printer in Word 2007 on the laptop, I got the message, "The Active Directory Domain Services is currently unavaiable."  I don't have a clue what they are trying to tell me. The printer had the bluetooth blue light was on when I was trying to print.
    Obviously I not a techie...   Any help would be appreciated.  

    Hello Macuser0210,
    I am sorry to hear that you are having issues with faded streaks on your documents.
    I found the following on HP.com. Solution Seven in the document might help you resolve your issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02206095&tmp_task=solveCategory&cc=us&dlc=en&la...
    Regards,
    Lynn_B
    I work on behalf of HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Can you print from the ADF with Officejet Pro 8600 (not plus) & how to print checks in correct order

    Client has Officejet Pro 8600 I(not plus) They want to print payroll checks out of QuickBooks but when they put the checks in tray 1, it pulls the check that is on the top, which happens to be the last check # in the stack.  Is there a way to print where the printer pulls from the bottom of the check stack as opposed to the top. I've looked and can't seem to find the answer. QuickBooks says we should check with HP and change something in the print drivers?
    So I thought it would fix it if they printed the checks from the ADF where I thought I could control if it pulls from the front or back of the stack. When we tried to print from the ADF, it pulled from Tray 1 and we weren't given the option to print from the ADF.   (only Tray 1 & 2...which they don't have the 2nd tray anyway) So does this model, not being the PLUS model, not allow you to print from the ADF. (only scan, copy and fax from the adf?)
    If we can't use the ADF for check printing, then how can we get the checks to print in the correct order.  Meaning, the 1st check # to print should be on the check that is on the bottom of that check stack in Tray 1.  Otherwise they have to count out the exact number of checks & place them in the tray.  Or reverse all of them which is not an efficient either! I hope this makes sense.

    Hi @kceacct ,
    I see that you would like to know how to print out the checks in order. I will do my best to help you.
    The ADF can be used for copying, scanning and faxing.
    From the print driver you can only select the tray that you want to print from.
    Changing Print Settings in Windows 8.
    You would have to load the checks in order from top to bottom in the paper tray, since the printer just pulls the paper in from the top of the stack of paper.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printer will not print from laptop

    I have uninstalled and reinstalled the printer multiple times and it will still not print from my lap top.  I have spent hours on this and am just about ready to give up.  It will print from my tablet but not the laptop.  It says there is a document in the print queue for about 2 seconds and then doesn't print and shows that there are no documents in the queue.

    Hi @sralong0929, and welcome to the HP Forums!
    I would be happy to help you print from your computer running Windows 8.1.  I understand that currently your print jobs are going to the print queue and vanishing after only a couple seconds, and worse of all, the print job doesn't print!  
    Please complete the recommended solutions presented in the following document, and let me know the outcome of your efforts; Print Jobs Disappear from the Print Queue and Do Not Print (Windows 8).
    I hope this helps, and look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Printing from Iphone4 to hp officejet pro 8600

    I am trying to print from my iphone4 to my hp officejet pro 8600 tried forwarding the email onto the printer using the printers email but the iphone4 comes back saying "a copy has been placed in your Outbox.  The recipient was rejected by the server.
    Any help with this would be greatly appreciated.
    thanks
    Jo

    Hi Jo-Winch  I hope you are doing well and welcome to the HP forum
    If I understand correclty.
    You are regiter to Eprint.
    you already have an e-mail assigned to the printer
    You are trying to send a print job thru that email and is giving the error that you describe
    If that is the case then check if the email's sender (probably you) included a signature included in the email.  If thatis the case  Removed and try again.
    Let me know if I can be of any further assistance. I will do my best to help you.
    Hope this helps;
    RobertoR   
    And Remember. . .
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Officejet 6500 709n no longer prints since yosemite

    Printer connected to wifi successfully. Doesn't show up fom macbook air when attempting to add printer

    Hello and welcome to the forums @espressodaily
    Although there are no Full Feature Drivers available for your Officejet 6500 Wireless E709n model on Yosemite, you can still install the printer through an Apple Update.
    Please check out this guide for the instructions:
    Installing Your HP Printer Driver and Software for Mac OS X
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for