Issue warning when number range expires

Hi ,
I need to issue a warning when the number range for Foreign Trade Data Number Range(XEIP) reaches the last 10% of the set interval. Can i do this through configuration?
Regards,
Hari.

If the number range is set up thru SNRO, then yes, there is a field that you can set a warning when it reaches 10%
You can maintain this in transaction SNRO.
Regards,
Rich Heilman

Similar Messages

  • Number range expires

    Hi all
    Can anybody tell me what happens when my number range expires.
    I have defined the object using SNRO and set the higher limit.
    What if the higher limit of my number range reaches..
    kindly help.. points will rewarded suitably

    if you make a new record, a new number is fetched. (normal way not expired)
    so if you delete a record the number it had is free again.
    when your number range expires, at first there will be taken the ones which are free again like explained above.
    but i have no clue what happens if it really expired.
    anyway i guess you get an exception, and if you dont cathc it a dump.

  • FF 3.5.17 for Mac doesn't issue warning when Command+Q is pressed while downloading is in progress?

    I'm using FF 3.5.17 with Mac OS X 10.5.
    I think that FF used to issue a warning when Command+Q is pressed while a file download is in progress.
    Is that true?
    I just unintentionally aborted a download by pressing Command+Q. What I wanted to do was simply close the browsing windows, and let the download continue.
    Did or does FF have the feature where it issues a warning when Command+Q is pressed while a file download is in progress?

    You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page.
    That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
    See:
    *http://kb.mozillazine.org/browser.download.manager.quitBehavior
    * http://kb.mozillazine.org/about%3Aconfig

  • Please help: Two-Sided One-to-One Mapping issues warning when owned instance does not exist

    Hello,
    Is it expected behavior? I have two classes A and B, B references A and its
    foreign key column is its PK
    A owns B (marked as inverse-owner in JDO metadata) when I access A.getB() if
    B does not exist I get a warning.
    Is it to be expected? Does two sided relation always require presence of
    both sides of the relation and does nto fit my need?
    Is there any way to have bi-directional association in my case with owned
    record being optional?
    Should I use two simple one sided one-to-one or may be simple one sided from
    child to owner and One-to-One with Inverse Columns from owner to child
    What are disadvantages of using two one sided (simple and inverse) vs.
    two-sided?
    Thank you
    Alex

    Here is what I had to do to solve this issue:
    Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
    domain isn't trusted.
    What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

  • Conflict Issue in Number range and need solution

    Hi
    I am facing a issue in SAP Number range conflict. The case is like that
    There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
    We have fatch a conslodate list of all object in excel sheet. 
    OBJECT   SUBOBJECT  RANGE_NR       YEAR          LEVEL  
    Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
    Number range are conflicting based on
    1. Differences between number range intervals
    2. Differences between number ranges levels
    3. Differences between number ranges types (internal/external)
    4.  Number range overlaps are marked
    pls just guide me approch for resolution menthods.
    Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
    Pls advice
    regards
    raj

    Hi
    I am facing a issue in SAP Number range conflict. The case is like that
    There are three source system and all these 3 source system are going to be mearge in fourth common system which is already is in use.
    We have fatch a conslodate list of all object in excel sheet.
    OBJECT   SUBOBJECT RANGE_NR YEAR LEVEL 
    Conflict to be solved - Either "Intervall-Diff.", or "NR Level Diff.", or "Ext/Int-Diff." or more than one of the three
    Number range are conflicting based on
    1. Differences between number range intervals
    2. Differences between number ranges levels
    3. Differences between number ranges types (internal/external)
    4. Number range overlaps are marked
    pls just guide me approch for resolution menthods.
    Also let me know FAQ before working on object and what other things i need to check in terms of SD consultant.
    Pls advice
    regards
    vicky

  • Excise Number Range for Object J_1IEXCLOC

    Dear All ,
    I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new  invoice number, whether it will be 0000000002 or 0000000301.
    Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
    Regards,
    Swapnil Vaidya

    >
    swapnil vaidya wrote:
    > Dear All ,
    >
    > I am having one issue regarding excise number range for object J_1IEXCLOC and sales group : 41 Domestic. i have already maintained number range for 2009 is 0000000001 to 0000000300. Now the range is exceed and the new excise invoice is created with number 0000000001. Now i am confused if i will maintain range upto 0000000500 for 2009 then what will be the new  invoice number, whether it will be 0000000002 or 0000000301.
    >
    > Pls. Give me some suggestion, What should i do now for the number range to be in continuation.
    >
    > Regards,
    >
    > Swapnil Vaidya
    It will be 2 and not 301. This is a flaw with CIN. All transactions take place by means of internal numbers and are stored in CIN transaction tables. Hence when the range gets exhausted, the number gets reset to the beginning, yet there is no error because internal number, which is the primary key, is different.
    To solve your problem. Go to SNRO and provide the object J_1IEXCLOC and click on status. Change the status to 300 and continue with your transaction.
    Regards,
    Aroop
    PS: Your question is more relevant for SD than MM.

  • Contact person Number range in ERP and CRM - Middleware settings

    Dear SDN team,
    We have currently integrated SAP CRM 5.2 and SAP R/3 4.6 c using Middleware .
    The contact persons are maintained in SAP R/3 system and also downloaded into CRM system . Currently the Number range is different in both the systems
    Going forward, we can create and maintain Contact Person data in CRM only. But we have an issue with the Number ranges allocation in ERP system.
    Our Questions are :
    1) Can we maintain a external number range for Contact Persons in ERP system ?  If yes , how is this possible ?  because Contact person is not a standard Account group in ERP and we cannot maintain PIDE settings for Contact persons .
    2) What is the best solution to maintain Contact persons between ERP and CRM with active Middleware settings.
    A Good answer will get maximum points.
    Regards
    Ritvij

    Dear Ritvij,
    Am no sure how best I can answer but attempting:
    Basically the contact persons in the R/3 system when are transfered to a CRM, the system generates the number from the number range with internal number assignment of the standard grouping. Hence, no PIDE settings involved.
    Now, maintaining the contact person in CRM and to determine the number range for contact persons differently, you got to go for enhancement. You can look at the note 564538 which might give you some clues as to what enhancements are required.
    thanks
    Ravi

  • Number range interval exceeds

    Dear All,
    when i try to post document in the no. range which has only the balance of 400 documents,it is showing the warning message: number range RF_BELEG has reached the critical limit but i want to control this message only for last 100 documents.In SPRO where can i do this config.
    points will be rewarded for the relevant answer.
    thanks,
    venkata hemanth

    Hi Hemanth R,
    Goto SNRO:-
    enter your object ( for eg: FIAA-BELNR -Number range for asset accounting documents)
    maintain  warning percentage -
    this field is used wen- Percentage of numbers remaining in a number range, upon reaching which in number assignment a warning is given.
    wen you reach the critical limit ( percentage of this) you will get warning messages.
    hope it helps

  • CO doc. number ranges

    Dear all
    Its very urgent issue regarding CO Number Range.(bus. transaction COIN)
    we are working on testing client. Here when we create any CO document, system generates document number.We can see this document in relationship browser but we couldn't see in KANK in current number status.This is already 1000 documents created up to now but in current no. status system showing 0 document(zero).
    On sandbox client it is OK means showing correct doc. number.
    Is this because of improper year end closing or is there any other prob.
    Plz help me out.
    Any help would highly appreciable and full points rewarded.
    Regards
    nilesh

    Dear.
    Has your odd client copied from other ? Then, maybe caused some system conflict.
    If not, please check following.
    1. CO document number range length 10 digit. (ex. 100000 (x) -> 0000100000 (o) )
    2. Whether No.buffer set or not. (Tcd : snum -> input 'RK_BELEG')
    Regards.

  • Business Partmer number ranges

    Hi Gurus,
    I would welcome others who have experienced the following issue with BP number ranges in SRM 5.
    Basically, the system has been set so that when Business Partners are created by the system, for example end users, org plan nodes and so on, the system standard internal interval and number range 0000000001-0999999999 is used from t-code BUCF. Now the issue is, we are about to bring over our R/3 vendor records who also use the same number range, for example vendor number 300012 and as it is impossible to create two number ranges which overlap in customising t-code BUCF, even though the R/3 number range would be external.
    Aside from using u201Cu201DInternal Number Assignment Onlyu201Du201D selection on BBP_VENDOR_GET_DATA, which I do not want to use, what other options are available in SRM 5 to get by this?
    Thanks,
    Steve Walsh

    Hi
    Here you need to understand what difference between vendor number and BP.
    In SRM the system will recognize any object through BP only.  and for vendor we need config a number rang  in cross applicationsetting as like as in ecc.  why becuase we stright way replicating the vendors from sap back end system.  for accouting purpose we need the same number.
    that we did we in cross application settings.
    do write to me if you have any queries on this
    regards
    satish

  • Vendor Number Range Conflict SAP ECC and CRM 2007

    I need to load SAP ECC Vendor data from SAP to CRM and have setup most of the configuration as required. However I have an issue, the vendor number range used currently in our SAP system is already in use in our CRM system and has been for some time (for Prospects and Contacts).  What is the best approach to dealing with this issue...
    My initial thought was to see if we could have two different numbers for the same vendor in ECC and SAP CRM
    eg SAP Vendor "50000001" equates to CRM "VEN50000001"
    Is such as approach supported?  Can you point me to the documentation that shows how such an approach could be implemented.  What approaches have others done to address similar issues?
    Thanks in advance
    Eddie
    By the way we are on CRM 2007 sp4

    Hi Eddie,
    SAP Note 1044637 - Customize Vendor Numbers
    Implement the code present in the attachment. You can
    change it according to your own requirements. The example code
    suffixes 'VEND' before the first six digits of the vendor
    number before it is downloaded to CRM.
    Thanks,
    Vaibhav Shah

  • Document Number ranges

    Dear All,
    Pls help me to solve the issue reg document number ranges.
    We have defiend the document number ranged for two company codes. Now ths issue is.. this document number range is being used/shared by both the company codes. For ex.. Invoice 01, 02 and 03 is posted in the company code A and we have not posted any Invoice in the Company Code B. If we post the Invoice in the Company Code B, number for the Invoice will be 04. And the next invoice in the Company Code A will be 05. But i will required to change the configuration to split the document number ranges..
    Pls help me to do so.
    Thank you

    Hi,
    This thing is obvious if the document number is being shared by more than one company code then it will act the following way...
    for example :- Company code "A" is assigned with document number 01 and if you raise an entry it will take the range from 01...like document number generated will be 0000001
    Company code "B" assigned with the same document number range 01 the next entry will create the next available number that is ....0000002
    This happens b'cz its being shared by both the company codes.
    Hence you have to keep seperate document number range for both the company code to avoid this confusion.
    Please assign points.
    Zia.

  • Error in Number range objec

    Hi all
        I created a Number ranger object and using this number range object in my program to get number automatically.
    The number starts from 1 as given in the number ranger interval but after 1 it skips 9 numbers and goes to 11,12, 13 so on.
    why does this happen . how to resolve this issue.
    In number range object I checked main memory buffering and given 10 for Numbers in buffer field.
    Kindly help me resolve this issue.

    Hi Eric
        I removed the No of values in buffer and kept that field empty , but now it is jumping around 400 numbers . why does this happen.
    Also let me know how to transport number range objects from DEV to QAS and then to PRD.
    Does the number range interval also get carried as it is to QAS system on transporting the request? if yes then the current number will be the last number generated in DEV system . How to tackle this issue.
    Thanks in advance for your help

  • ERROR in number range in F-02, FB60 and all fininace postings

    HI All
    could you please  help us on this issue , ERROR in number range    got this error while posting all FI related , we cant able to post documents we are in ready for SIT but in unit testing got this error  .
    we don't have any clue , kindly share your experiance on this

    Hi Murthi,
    Please check through T Code FBN1 whether you have maintained correct number range for Document type (Check document type in OBA7 and see what number range is maintained) you are posting in that particular company code and fiscal year.
    If not maintained please maintain the same. It will solve your problem.
    Also you can click on question mark tab in yellow and see the details of error. You can also get the information of error and solution.
    Regards,
    Pankaj Singh

  • Wrong selection of number range

    Dear all,
    I had a probelm number range selection for payment to one of the payments. New number range for financial year 2009 is created for all the posting types in midlle of  March,08.
    Post dated  cheques for  April-08 issued in March-08,  one of this transanction is posted to wrong number range.
    Is it because post dated cheuque issued before creating number range or any other reasson..
    Can any  body  explain
    Thanks in advance.
    Thomas

    Hi,
    System checks the current number range and posts document based on it. in your case you have created number range in March for next year and for 2009 document, system will take that number range.
    For 2009 document system will take 2009 number range
    Hope you got it
    Assign points if useful
    Sunoj

Maybe you are looking for