Issue with a Basis Report

Hi All,
I am developing a report which will display the following columns.
User ID Terminal Tcode Date Time
The selection screen will be as follows.
Login ID
Login Date (Range...From To)
Now, my Basis mate would like to have a report which will display the Login Tcodes within a given range of Dates.
Can anyone tell me which tables should i query to get these details?
Please help me out in this regard...
Regards
Pavan

Hi Pavan Sanganal,
Check the following tables.
USR02 - Logon Data (Kernel-Side Use)
USR21 - Assign user name address key
Hope it is helps.
Regards,
T.Duraimurugan.

Similar Messages

Issue with Exceptions in Reporting

Hi BW Gurus,
            I am still new to BW, Like I have a issue with exceptions in reporting.
            Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
   V1                  46,782,434(this are rough figures)
   PD                  56,232,453
   Overall Result      102,434,111
        Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
        I have given threshold values in exceptions. like
   0           -
> 45,000,000(Red)
   45,000,001 -
> 65,000,000 (Yellow)
   65,000,001 -
> 500,000,000 (Green)
       But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
       Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
       Thanks in advance.
Regds
Sam

Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
Hope this helps...

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Hierarchy issue with Web Intelligence Report

Hi All,
We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
BEx query shows correct data in RSRT with hierarchy nodes.
We have built a Universe on top of this BEx Query.
We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
Please suggest, why such behavior with OLAP universe and how to resolve this?
Best Regards,
Ashish

Thanks for your suggestions.
I am little confused on how to check SQL generated for OLAP WebI Query.
But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
Do you know how WebI behaves with BEx hierarchies?
There has to be some setting to make it work...
Best Regards,
Ashish

Issue with printing lockbox report

Hi,
My lockbox report after processing file is giving the total amount and check amount correctly but when I print the same report, the figures don't match with the correct report figures for check amount and advice total.
Please help....
Thanks,
Sheel
Edited by: Sheel Ahuja on May 19, 2010 11:11 PM

Hello,
Please, open a message for SAP on the OSS Marketplace. There are some notes for this type of issue, but they are currently in pilot release.
So, open a message describing the issue and providing a reproducible example in your system.
REgards,
REnan

Issue with CRS Historical report scheduler

Hello guys,
I have a customer with ipccx 5.02 .
THe customer could execute manual reports but the scheduler reports doesnt work.
I follow the IPCCX troubleshooting guide :
1.Stop and start scheduler service.
2. Connectivity is fine.
I dont receivce any error from CRS client , i need little help im new in IPCC world?
Any suggestions please?
Thanks,
Carlos

Hi Anubhati,
PC is logged during the time that scheduled is programming and also is not in sleep mode.
I have download the CiscoSch log from CRS Historical report and i found i issue with license :
INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
104 ERROR Jan 19 2011|17:00:45 Getting of total available license info failed
105 ERROR Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
I have the following license :
UCCX enhanced
IVR ports 150
Enhanced seat 22
CCX Maximum agents 300.
I generated a report for see how many agents is logged in = 15 .
Regards,
Carlos

Issue with exporting Financial Report in Smartview 11.1.2.2

If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
So the issue is only with the FR using Shared members.
Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
Thanks

Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
Thanks for your help John.

Issues with BI publisher report in dashboard

Hello all,
I got some issues about BI publisher reports in a dashboard.
I use a dashboard prompt in combination with a BIP report.
1.) I don't want to see the publisher control bar in my dashboard. Now you can't view the report anymore after using the dashboard prompt. Because it says you have to press the view button which is on the publisher control bar.
So when I add the bar. Then I have first to press on go in the dashboard prompt and after that I have to press on view in the publisher control bar.
2.) When I open my dashboard I see a scroll bar in my BIP report. Now when I use the dashboard prompt, it disappears. So I can't view the entire report anymore
3.) I like to develop in english, but the test must be in dutch. Now I have a english dashboard with a dutch control bar. Also logging in to BIP in english and then navigating to analytics will not help.
4.) I can't use I-bots on BI publisher reports, or can I?
5.) This is not really an issue, but more like a problem but I want that users can view the BIP report on the dashboard only in HTML, but I want that they only can export to excel, is this possible?
Hoping for some answers ;)
Thanks in advance!
Message was edited by:
Remc0

Hi Venkat,
Thanks for your quick respond.
1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
4.) Ok, I will have a look on that.
5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

Issue with ADF Application Report Generation

1) We are developing the web-base ERP application we are using technology as follows
a) Operating System Red Hat Enterprise Linux4.
b) Application Server Oracle Application Server 10.1.3
c) Oracle ADF is the frame work
d) Jasper reports (iReport 3.0.0) as report generation tool.
While generating larger reports using iReport3.0.0 Tool i,e., contains more than 20,000 records the query while executed in Sqlplus takes less than a minute, but while the report is run it takes more time leading to time out and the pdf file is not generated. The error shown on the screen is “the web server unable to process the given request”
The session time-out is 5 minutes. Please help us to tackle this issue since most of the reports are summarized reports and contain large transactional data and is critical reports.
You may also suggest other web based report tools which help us generate large reports in PDF and/or text formats.
By
PRABEETHSOY P
Edited by: prabeethsoy on Jun 26, 2009 1:13 AM

PRABEETHSOY,
some things come to mind.
While generating larger reports using iReport3.0.0 Tool i,e., contains more than 20,000 records the query while executed in Sqlplus takes less than a minute, but while the report is run it takes more time leading to time out and the pdf file is not generated.Running a query in sqlplus is totally different from running it in an application. Sqlplus only pumps the results to the screen, whereas the application builds some layers around the data, so that you can navigate through the result. This will cost some time.
You can try to optimize your strategy working with the data, i.e. running the query in forward only mode and/or omit the usaeg of EO where you know you don't need to change data.
But in the end you may find that you have to use a different approach to generate the reports: do it asynchrony, meaning that you start the generation on the server, let it finish there (putting the result in a file) and send the finished report to the user in a different request. Do do this you can use a poll component, or you ask the user to come back later (giving him a report number to ask for). Other solution are possible.
Timo

Issue with SAP BW Report Iview

Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.

Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR

Issue with execution of report

Hi,
I have an issue when the report is running. It is taking long time to run.
The scenario is that We used Plant in selection screen initially and there were no issues in execution of the report.
As per the business process, the plant has to be replaced with another info object zobject_0plant. Zobject is a customized infoobject and 0plant is the navigational attribute of zobject.
The report is running good without the selection of Zobject_0plant.
When this zobject_0plant is selected in variable screen, the report is taking long time to execute.
Please help me to resolve this issue.
Thanks in advance.

Hi... as per your issue
First note: Check the master data tds rates were maintained or not . and the new rates were updated in all the vendor master data or not
In EWT a field called business place is playing major roll. Please check that all the transactions should have business place. if some transactions do not have business place than it will not consider for challan posting.
1. Post invoice with TDS (importantly update the business place and section code)
2. Run J1INCHLN for monthly remittance to Govt.
3. Update J1INBANK for back challan updatation
Note : checked the table with_item and the bseg,bkpf tables.basically the j1incert picks/parses data from the with_item table(the program fetches all the data from bkpf and checks with with_item table and does some filtering and its shown in the certificate print)
4. Run J1INCERT to print the TDS Certificates
Note: Finally just look into your J1INCERT entering parameters screen, the problem lies in the paramaters most probably in dates only assuming all the required configuration has been correctly done
Also Please change the assigned form J_1IEWT_CERT to J_1IEWT_CERT_N
I hope it will helps you...please confirm
Regards
vamsi

Red Blue issue with published DeskI Report in InfoView

Hi everyone,
i'm expieriencing a strange behaviour with my published DeskI Reports.
I'm using logos in my report and they work just fine... in my full client. As soon as I publish them to InfoView and open them up in the browser, then somehow the color red and blue interchange. Red becomes blue and vice versa...
My System consists of:
BOE R 3.1 SP2
Win Server 2008
DeskI and WebI
Has anyone expirienced the same issues?
Thanks and kr,
Nils

Hi Stratos,
so far everything is just fine. Hope you are doing great too.
my IE version is: 7.0.5730.13
Tomcat version: 5.5.20
If I click on the logos in InfoView, nothing happens.
I tested 3 different ways to implement them:
1) via link; pictures shows up, but again with the red blue issue
2) as an object; pictures shows up; also w/ the red blue issue
3) inserted a cell, and pasted the picture in it, pictures shows up; also w/ the red blue issue
The strange thing is, that this issue only appears in the browser.
Thanks,
Nils

Facing Issue with Stock Ageing report

In Blocked Stock Ageing report Output, I am facing following issues
1. Stock is correct but once we include the "Reason For Movement" then the aging is getting wrong and in some cases value is coming Negative.
2. In some cases "Reason For Movement" is coming in ‘#’, but this is a mandatory field. Hence cannot be blank.
Note:
1. Overall stock is coming correct.
2. Reason Movement chat. is in free char
3. Report is based 0IC_C03.

Hi Nadeem,
Reason for Movement is loading from what attribute? check in RSRV for that attribute.
RSRV-->All Elementary Tests ->Master Data ->Compare Size of P-, Q- with X- and Y- Tables respectively .
If it has any error then correct that error in RSRV. It will solve your problem.
Regards,
Rajesh

Issue with VS project - Report has remapped fields

VS 2005, Crystal XI R2
We recently upgraded a VS project using Crystal reports. The database has changed, with table name and field name changes.
We used the "set datasource location" to remap the table names and fields. Reports run fine as stand alone.
But when running from the VB project we have an issue when logon info is applied to the subreports.
In the standard code to apply logon information to the subreports, this line of code
Crtable.Location = crConnectionInfo.DatabaseName & ".dbo" + "." + crConnectionInfo.UserID + "." + crConnectionInfo.Password + "." + Crtable.Name
fails because Crtable.Name resolves to the old table name (ctct) which has been remapped to new table ca_contact using the set datasource location option from Crystal.
If I comment out this line of code, the reports seem to run fine, sometimes we get prompted for connection info. Once the info is set, the report runs.
But can I get this line of code to work? is there some way to get Crtable.name to point to the actual table name "ca_contact" and not the old name "ctct" that the table and fields were remapped from?

Thanks for the reply, but the subreport has been already remapped. I just went back in and double checked.
I am thinking about writing some code that will be something like
(pseudo)
if table = ctct then replace table name with ca_contact
but there should be a way around this. Even though the table is remapped, it is picking up the old table name alias instead of what it is mapped to.

Issue with Scale base routines in Pricing

Hi All,
This is regarding one issue I am facing in Invoice creation.
It happens randomly in some invoices (impact is in <5 % of invoices) that a discount condition value is incorrectly calculated when created through batch job.
This issue is not replicable in any of the lower environments.
When we cancel the invoice in produciton system and recreate it, the values are calculated correctly and we failed to replicate it even in production to find the root cause.
Here are the details:
We have a custom condition type which is a group condition (header as well as item) which is set in percentage where customer is supposed to get a discount (for eg. 1 % on the net price)
We have a Scale Base value routine which fetches the ‘scale base value’ from a custom table and assigns it to the item on the invoice (XKOMV-KSTBS).
All further calculation happens in standard SAP code where it checks the scales maintained in the condition record and applies the correct rate so the discount is applied accordingly.
Our pricing routine is working fine and is passing correct value to the scale base field.
The issue is in standard SAP code which applies the discount.
For all the impacted invoices, we have correct scale base values (fetched in our routine) but the corresponding discounts (KONV-KBETR and KONV-KWERT) are zero.
Only the last item in all the invoices shows a large negative value which is wrong .
Please guide me in finding the root cause.
Regards
Ritu

Hi,
These requirements should be met to fetch the condition record in the document.
1 = Different Payer
If this requirement is assigned to the condition type, the sold-to-party and payer should be different, so it will be picked up in the document.
2 = Item with Pricing
The item category of the item should be relevent for pricing.
3 = Foreign currency doc
The company code currency is derived from sales org in a sales document. But we can change the document currency in the sales document header also. And condition also can be maintianed in different currency. If this requirement is assigned, the company code currency and document currency should be different.
4 = Cost
If this requirement is set, the item should be relevent for cost determination (setting in item category)
5 = No Condit Exclusion
If this requirement is set, it will not consider the condition, if any condition exclusion is maintianed for it.
Prase

Issue with a Basis Report

Similar Messages

Maybe you are looking for