Issue with belle fp2

i upgraded my 701 to symbian belle fp2. now i can't find facility to send multiple pics from gallery. moreover the videoediting is bad. i can only trim it. so as photo editing. in the former version i can use many options in video editing. now i can't. so, is there any possibility of another upgrade to fp2?

@ravi626
Whilst it may be technically feasible to recover these applications it is beyond remit of this forum to advise upon how to implement this procedure, but can co-exist with latest version upon Belle FP2:
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Getting problem s with belle fp2

    after updated to belle fp2 , i cant use the opera mini. Opera mini only shows boxes instad of english fonts so i cant read the texts. What to do now?

    I have installed from Nokia Store several times, but I am seeing same problem. Seeing just Box and Boxes.................like
     My model is Nokia N808 Pureview. FP2
    Attachments:
    Doc1.doc ‏20 KB

  • Youtube issue with Belle refresh

    Invalid parameters,that's what I got after installing nokia belle refresh on my N8.
    tried to do a hard reset,but doesn't work
    Moderator's note: Mentioning of illegal third party software removed. 
    Attachments:
    Scr000001.jpg ‏21 KB

    Here is the solution: For thos who uses a negative GMT ,like me (Argentina  -3 GMT) , will need to change for a positive GMT ,like Germany +2 GMT, then go to youtube with your native browser, see how works, and finally go back to your previous GMT.
    PS: Luxintosh was the provider of this solution. (from another forum)

  • Brightness issue with belle on e6

    my brightness settings on e6 belle comes to level 0 automatically even if i set it on any higher level after some time....can anyone tell me how to solve this....

    power saving m0de will be activated. Deactivate that m0de 1st and ensuer that your m0bile battery is charged m0re than 20% and then change the level of brightness. But 1st of all ensure that power saving m0de isn't activated

  • 808 Belle FP2 - CarMode with Mirror Link

    As some probably already know since Belle FP2 where basic CarMode application is pre-installed in device firmware it is currently impossible to purchase CarMode with Mirror Link for appropriate head units as Nokia Store says that it is already installed upon device; to date any support enquiries via Nokia Store application have elicited zero response concerning this issue.
    When a client approached me upon how to resolve this issue quickly, had to purchase the grottiest condition N8 downgrade software to Symbian Belle, then get client to purchase CarMode with Mirrorlink with their Nokia Store credentials; ironically Nokia Store upon client 808 then shows that CarMode with MirrorLink v2.0.6503 is now available as an update to install!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

    zjuka wrote:
    On Store CarMode with Mirror Link have UPDATE button.
    That is a known issue since the last release: In the ‘Car mode’ app itself, an old version number is shown although a newer is installed. In the ‘Store’ an update is shown, although it is installed already. Furthermore, from the menu icon, you do not know whether you have MirrorLink or not.
    Therefore, to double check if you have MirrorLink and which version, please zjuka, go to:
    Menu » Settings » Installations » Already installed » MirrorLink »
    2.00(6482) for Nokia Belle Refresh or
    2.00(6503) for Nokia Belle Feature Pack 2
    not Nokia Belle Refresh, only Nokia Belle Feature Pack 2:
    Menu » Settings » Applications Settings » Positioning » Find my location » Positioning methods » Car Head-Unit GPS = MirrorLink. By the way, you should turn-off that car head-unit positioning-method because it blocks the GPS localisation in the current Nokia Public Transport version 2.5.0 (HERE Transit).
    If you have the above menu items and version: Ignore that Update button, please! Did that help?

  • How to re-install to refresh Symbian Belle FP2 150...

    Hi! There used to be a re-install option in Nokia Suite... How to re-install on Nokia 808 PureView to refresh Symbian Belle FP2 1508 on Nokia PC Suite or Nokia Suite without reformatting? Just an in-place re-install will do, thanks!
    Attachments:
    NSU PC SUITE.jpg ‏74 KB
    NSS Update.jpg ‏65 KB

    hi jim,
    If the machine was preloaded with Windows 8 and you upgraded to Windows 8.1 via the Microsoft Store then I can verify that you should be able to restore from Windows 8 by doing a Windows 8 Refresh. Check this guide to see what settings will be preserve and  which settings will not be preserved.
    Update to Windows 8.1: FAQ:
     "If your PC came with Windows 8 you might be able to restore it back to Windows 8 by refreshing your PC."
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Nokia belle FP2 c :drive storage problem

    i m havin a great problem with nokia 603 belle fp2 device ... I have updated almost 1 n a half years ago ... Since then i facing storage problem in c drive ... Automatically memory vanishes from c drive ... Though I don't install apps in c drive , im facing this problem ! I have to restore my device when memory in the c drive goes low ! Is there any solution ? Please help me ...

    Hi shafi4742, 
    Welcome to the forum! 
    Aside from the software update, did you install any particular app prior to this issue? Since the issue started after you updated the phone's software to Nokia Belle FP2, you may try reinstalling the SW using Nokia Suite. Just download it on your PC, and then connect the phone via a compatible USB cable. After that, launch Nokia Suite, and then go to SW Updates > Device Software Update > Reinstall current SW. You can download Nokia Suite from this link: Nokia Suite - Download and Support.
    Let us know the outcome. 

  • Issue with Upgrading to 2nd Generation MotoX

    Dear Verizon Wireless and Motorola Mobility,
    Your 2nd Generation Moto X Upgrade program is fatally flawed and my experience highlights everything that could possibly go wrong when attempting to upgrade an existing plan.
    As Verizon replied to my tweet (my twitter name is @melting_plastic), “Getting a new phone should be an exciting time.” but my experience has been everything but that.
    My current phone is a Motorola Droid Razr Maxx. This was my first entry into the Android operating system and I fell in love. As a former Blackberry user, I was a bit hesitant to switch but upon receiving this phone in May of 2012, I had nothing but a great experience with it. This experience made want to continue with a Motorola phone upon my next available upgrade and I had waited to upgrade my phone until the newest Motorola phones were announced. I put off my upgrade for over 5 months waiting for the announcement of a new phone with my current phone deteriorating. The battery life has dropped to less than 2 hours and it has begun to freeze constantly with all the upgrades to software that it is unable to handle. Due to these issues, I checked every day waiting for an announcement of the new Moto X to be release and was finally happy when it was announced it would be released on September 27th for Verizon.
    On the morning of Friday September 27th, I attempted to order my phone, a 32gb model, through the MotoMaker website and my first issue arose. Even though I was eligible for an upgrade, the MotoMaker website required a credit check for me to upgrade. As I am not the primary account holder, I did not feel comfortable inputting my father's information for a credit check. I also felt it was not necessary as I was paying the $149.99 by my credit card and the account has been with Verizon since the mid 1990's while it was still Bell Atlantic. As I was eligible for an upgrade and not a new account, it seemed a bit much that this credit check was needed. After searching the internet, I found many posts from the original Moto X release about this issue and the solution was to go to a Verizon Wireless store and pre-purchase the phone there and use the provided pin to order the phone at the MotoMaker website.
    During my lunch break on September 27th, I visited the Wireless Zone retailer in Malvern Pennsylvania and waited for over 45 minutes to talk to an associate in an attempt to pre-purchase this phone and receive a pin for the website. This associated had no information about the ability to purchase this pin nor could he order the 32gb model directly for me. He apologized to me about the wait and his inability to fulfill my order but recommended me to go to a retail Verizon Wireless store as they may be able to help me.
    After returning to work, I decided to attempt to discuss my issue using the Verizon Wireless help chat on its website. The operator suggested to call the Verizon support line and that they should be able to help me on this purchase. I proceeded to place the call, once again waiting on hold for 30 minutes, until I finally was able to talk to a representative. This representative was unable to help me but transferred me to another department that may be able to. After a brief hold, I was transferred to an individual who was finally able to help me out. He informed me that the 32gb model was not in the Verizon system but was expected to be added on October 1st. He apologized for the wait but at least he was able to provide me with valid information.
    On Saturday October 4th, I visited the Verizon Retail location in King of Prussia Pennsylvania and once again waited 45 minutes before being seen by a representative. This time I was helped by an associate named Jeremy who knew exactly what I meant by purchasing a pin. After a bit of struggling to properly place the order, the order was placed with the help of a manager, at the price of $199.99 with a $50 mail-in-rebate. This became the 2nd area of disappointment. Not only did I have to wait to purchase this phone but I had to pay an increased rate up front and needed to send in for a mail-in-rebate. I thanked Jeremy for his help and headed back to my residence 15 miles away.
    Once home, I attempted to place the order for my phone. As I live 100+ miles away from the primary account address, I had planned to have the phone shipped to my work as I had done when I purchased my Droid Razr Maxx. The MotoMaker website prevented me from changing the shipping address and I was once against frustrated by this process. I used the MotoMaker online support tool and they informed me that I must contact Verizon and they can adjust the shipping address as each PIN has a pre-defined shipping address attached to it.
    I called Verizon's technical support line at approximately 4:30PM from my home phone. After once again waiting on hold for half an hour, I was finally connected to an associate and she was very friendly and attempted to help me with my shipping issue. She understood my frustration and placed a 3-way call between her, myself and Motorola support. During this call, she and myself became very frustrated with Motorola support staff as they refused to adjust the shipping address and stated that there was nothing that they could do. She apologized to me and suggested that I return to the King of Prussia location and attempt to sort it out there.
    Begrudgingly, I returned to the Verizon location and once again waited to speak to Jeremy. He apologized for my situation and saw the only way to rectify it was to have FedEx adjust the shipment address after it had been shipped. He informed me that any charges that would be incurred to do so would be credited to my account if I returned to the store with the receipt.
    I returned home and attempted to place the order again. This time I was able to adjust my shipping address and placed the order. While doing so, I received an error message and was instructed to call Motorola's support line. I called this line at around 7:45PM and spoke to a gentleman named Christian. He opened up support case 141005-006808 and informed me that because of my attempt to change the shipping address, this was why the error occurred. He instructed me to attempt to replace the order using the original supplied address and e-mail account and that I “must” use the Chrome web browser. This statement of having to use the Chrome browser was a complete fallacy and he refused to accept that any other browser could be used to properly order the phone. I installed the Chrome browser, attempted to order the phone and this time I was informed that my PIN was already used, likely during the original failed attempt. Christian informed me that he must escalate the issue and it would take an additional 24-48 hours. The simple act of creating a new PIN should not take this amount of time.
    On Monday October 6th, I was finally able to get in contact with another associate from Motorola who was instantly able to create a new PIN for me. I once again placed the order and this time it went through with no issue, order number 00789348. The only disappointment was that I now had to wait until “approximately October 27th” to receive my new phone. During my waiting period, I periodically check the MotoMaker website and during that time, noticed that they offered an additional $50 discount on the Verizon Moto X which would have brought my total down to $99.99. So on top of the additional wait and disappointment, I had now paid $100 over the current price through MotoMaker .
    On Tuesday, October 22nd, I finally received the e-mail stating that my phone had shipped and was due to arrive in Forked River, NJ on October 23rd. Using the FedEx website, I attempted to adjust my shipping address to my work, at the cost of $30 and a delay until Friday October 24th. I was unable to perform this action and then attempted to adjust the shipping address to the location I would be at Friday night (my sister's house) for the same delay, but only a cost of $5. Once again I was unable to perform this action and decided to call FedEx directly. After speaking to the associate at FedEx, she informed me that the only way to adjust the address was to have the shipper, Motorola Mobility adjust the address. With my previous issues with Motorola, I knew that this request would be denied. At this point, my only recourse is to have my parents ship me the phone to my work once they receive it on October 23rd. Even then, I'm unsure if FedEx will leave the phone at the location without a signature if no one is there to sign for it, which is why I attempted to ship the phone to my work.
    At this point, I'm extremely dissatisfied with both Verizon and Motorola with how this whole situation has transpired. I feel a though I should have purchased an Apple iPhone 6 even though I am not a fan of the iOS platform or a different Android OS manufacturer. As a Fios account holder, I am also tempted to switch to the competition after 3+ years of being a customer. I feel that both Motorla and Verizon failed to rectify any hardship I had experienced in my attempt to purchase this phone and even now fear that I will not receive my phone in time to mail in mail-in-rebate which needs to be postmarked by November 1st.

        MPerreca, This is quite a lot for you to have to go through! We surely don't want to lose your business as we appreciate your loyalty with us. I understand the challenges that can come in needing the shipping address changed on your phone orders. I'm glad to learn that the phone is now on it's way.
    I'm confident that you'll be fine with submitting the rebate for your phone. If you do run into troubles with the submission, please let us know. You can also pre-submit your rebate information, here: http://bit.ly/1kKwKJK. Let us know if you have further concerns.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • 3G Issues on Bell Canada Network

    Hi,
    I have been without 3g service on my 32GB 3G iPad 2 for the last three days. My 3G data did work beforehand. My Wi-fi connection works fine.
    I get no 3G connection using any app but when using Safari, I get an error message of:
    Cannont Open Page
    Safari cannot open the page because the network connection was lost.
    My iPad shows full bars and says Bell 3G in the corner.
    I spent a lot of time on the phone with tech support running me through the standard troubleshooting procedures, turning settings on and off, resets, I even did a full restore when I got home.
    Thinking it may be a hardware issue, I went to the Apple Store and they gave me a whole new iPad, but after reinserting my SIM, I got the same issue.
    I went over to the Bell kiosk in the mall and was there for about an hour doing more troubleshooting including giving me a new SIM card.
    I'm thinking the probability of having two faulty iPads is pretty low and am assuming it is totally on Bell's shoulders. Talking to tech support today, they admitted they've had a few similar calls.
    Has anyone else experienced the same issues?
    I am kinda POd as I had a skin on the back of my original iPad that wasn't coming off in any nice fashion so I had to leave it on the iPad going back to the warehouse esentially putting me out money.
    I'm supposedly a "high priority" with Bell and am expecting a callback later today or tomorrow.
    I'll be switching to Rogers or Telus if this isn't wrapped up soon, so annoying.

    @spitfire411
    Here's the confusing part.  You are claiming that you are on a shared data plan and yet your wife's corporate only has a 500Mb data plan.  As I recall from a Bell Canada rep, any shared data plan with a smartphone (iPhone) requires a minimum of a 1Gb data plan.  And in order to achieve something similar to what you thought you are getting, you need a small business account with about 1000 voice mins plus extra $30 gets you a 6Gb data plan and plus $10 additional share plan to share the data plan with your tablet (that was when the 1st iPad came out -- they lowered the restrictions somewhat since then).  I had to upgrade to this plan in order to get sharing and tethering to work properly.  The monthly flex plan you mentioned is I believe an independent plan by itself and should not be tied with your wife's corporate plan.  Perhaps they may have made a mistake and tagged your tablet's plan as a shared data plan with a smartphone, but since it's only a 500Mb data plan, the system probably refused to allow sharing because of its failure to meet the minimum 1Gb data plan for smartphones that's required.  Unless Bell had changed this requirement recently?!?   
    Bell's Corporate EPP plan is not the same as a small or business plan because some people can get it through say BCAA (then) or Costco or an employee working for a company, so sometimes Bell people confused what's possible in a business plan that is not available on a corporate plan and I suspect this may explain why you lost access after the 1st billing cycle.
    To give you an idea, minimal browsing and email and social networking can consume about 1Gb/month with an iPad.  Any minimal Youtube streaming and Shoutcast or Tunein Radio usage on top of what you are doing, you will need a minimum of about 3Gb/month.  Yes, a tablet can suck bandwidth much more than an iPhone which probably explains why Bell wants you to have a minimum 1Gb data plan so if you plan to tether an iPad to an iPhone, you are not going to get any surprises with a 1Gb data plan as opposed to a 500Mb plan.  So unless you have a large data plan (5Gb or higher), you should keep your smartphone and tablet plans separate. 
    Good luck in your progress with Bell and let us know what you found. 

  • E6-00: what's wrong with Belle refresh (and other ...

    I've been following this forum and have always been up-to-date with E6-00 firmware. I've been almost happy with Belle and was expecting hardly the Belle refresh version for the Music player upgrade. What I got was - ? I don't know. Just the new version and no instant visible change. However... :
    - the Music Player is the same. Meaning, no song search and still ridiculous user interface
    - the phone tries to establish the data connection quite often even if no application is open
    - the phone is hardly responsive from time to time (while looking for the network connection)
    - the phone does not want to connect to the wifi. Restart helps.
    - the phone loses the network operator and does not reconnect. Happened once (when roaming). Restart helps immediately.
    - the Microsoft Apps: pursued upgrade. I personally do not need them. The screen is simply to small to use them effectively.
    - (not a complaint) the battery life: I think the battery life is not really affected by the OS. Those complaining about shorter battery life should check how much time they spend using the phone, being connected to wifi, etc.
    I'm very disappointed with the E6-00. I try to keep it positive but it keeps me down with every (new) issue. Does anyone has advice what to do with upper mentioned issues? I bought the phone ~2 months after it was available. I'm assuming that these first production series can have hardware issues? My phone was on reparation twice: for the notification light (hardware thing) and bluetooth issues (voice not heard over the bluetooth headset). The latter is still present I think...
    I consider buying E71 since there's no other good (Nokia) phone on the market. What makes me sad the most is that my iPod touch does wifi connection and other things smoothlessly... But I don't want an iPhone (which is in principle the same as iPod touch), I just want a good Nokia.
    Regards,
    P

    strelamcqueen:
    I agree with your post except for the fact that Belle hosed my E6.  Meaning: if you look at all my other posts, it's all about the GPS data functions that were awesome with the E71 then went away with the E6 on Anna.  At least with Anna, there was an app called LeGPSData2 that restored most of the E71 GPS functionality.  LeGPSData2 is not compatible with Belle. Sooo, I am currently using my E6 ONLY because of the decent camera. 
    Belle made the UI look pretty but that's it.  I found the same problems with the responsiveness that you mentioned and issues with not connecting to my home wifi when I try to browse the net at home.  There's nothing like downloading a bunch of big files only to discover that I've chewed up a bunch of data because the phone didn't connect to wifi.  I put the wifi widget on one of my home screens and I make sure that I manually connect to wifi now before starting the browser. The Microsoft app via the upgrade were a joke. They actually took over Quick Office so that Excel and Word opened with MS Office Mobile.  This would be fine but they open so tiny they are unreadable and they are not editable with MS Office Mobile for some reason.  I removed the MS apps immediately.
    My battery life suffered a lot after Belle refresh.  With normal use as before the upgrade I would get home with about 50% battery with 3G ON.  With Belle refresh,  The battery won't make it through a full day with 3G on and I end up with about 25% battery at the end of the day with 3G off.  Good thing I don't use much data through the day!
    This is actually my second E6; long story but the first I upgraded to Belle and was disappointed with the loss of LeGPSData2 app.  This one I was forced to upgrade to Belle refresh because while updating Ovi Maps one night, the update completely deleted the Ovi Maps app and I could not get it back without updating the OS to Belle refresh. 
    So I am with you.  I too am very disappointed with the E6 but most of my disappointment comes from the software 'upgrades'.  If Nokia would just leave well enough alone, all would be fine.  I am sorry I have no advice to take care of the problems you and I are facing.  I am in search of a new phone now and if I don't downgrade to an E72, I won't be getting a Nokia again.  It's a sad story because I have been a die hard Nokia fan for a long time.
    DS
    @adrianhughes:
    HUH?  stelamcqueen is asking advice from other USERS.  That's what the forum is about.  

  • Issues with iPhone 4 mute toggle vibrate

    I'm having issues with the mute toggle on my iPhone 4 4.3.2, it suddenly started happening where if I switch to ringer it will vibrate sometimes but not on silent, and vice versa.

    I have been having this same problem ever since I got my iPhone 4 in Oct 2010. Even though I do my software updates regularly and currently hold version 4.3.3, it keeps happening. Also, once I restored my iPhone software too.
    Recently, I phoned up Apple and spoke to a member of the Support Team; who suggested that I Restore the software again. But after Restoring the software again and having the latest version, it ends up in square one. The problem still exists - mute toggles and vibrate.
    This problem happens randomly sometimes when the switch is on Ringer; iPhone 4 vibrates and pop on screen the mute (bell) sign, then immediately again it will vibrate and pop on screen the unmute (bell with line cutting across) sign. When switch is on Silent, vice versa does Not happen.
    It is really annoying and I have had enough of this issue for 8 months. I am definitely taking my iPhone to the Apple store, if they can’t fix it, the iPhone gets flushed down my commode!

  • Nokia Belle FP2 - Google and Bing local search res...

    Hi, I've got a Nokia 700 with Nokia Belle FP2.
    No matter if I use Bing or Google for searching, it does not offer any local search results to me, although the browser supports the HTML5 geolocation API.
    Also, the Google Mobile version is the "light" version.
    How can I change this?

    Hey I have updated my 701 to FP2 just after you guys released FP2 from your servers via OTA(2nd oct) . Over all its a good update but  i have noticed that
    1) No option to use Front cam while in camera or video mode .
    2) No exit button in camera or video mode( have to press End key)
    3) Nokia Music and Video editor fails to respond( DEAD)
    4)Phone is laggy especially when using music player and web/email applications at a time.
    5)BELLE EXTRA BUTTONS are colliding with CALL & SEARCH homescreen buttons( CHECK ATTACHMENT )
    6)In Landscape mode ( when using any application e.g: Whats App or Nimbuzz e.t.c.,)  not able to see the text typed above.( CHECK ATTACHMENT)
    7)No option to select Multiple images in gallery.
    Please revert back 
    Sandeep
    Attachments:
    Belle Extra Buttons_701 FP2.jpg ‏122 KB
    Keyboard _701 fp2.jpg ‏54 KB

  • 808 Belle FP2

    Is it me or is "Swipe to unlock" rather slow as missing tap to unlock already?
    Prefer not to use spring loaded "lock-key" as probably first component to fail!
    Happy to have helped forum with a Support Ratio = 42.5

    @aspergerguy Did you really create this thread with the title "808 Belle FP2" ? Tut tut.
    I agree that the swipe is a little slower than the previous tap, however, I pretty much always use the physical lock switch and have no reason to think it will fail. The switch never failed on my N97, C6-01 or N8 and this one on the 808 seems the most robust of the lot.
    svi78> Please try the following: Press Menu key and then swipe from the right to left. There is not "unlock" button on the Nokia Belle FP2.
    aspergerguy said that the swipe was slower than the tap, not that he couldn't find how to unlock the screen without using the switch.

  • Belle FP2 is still unavailable.

    I'm in Srilanka, I'm using a Nokia 603. I frequently check in Software update and device manager for Belle FP2 but its still not available
    Moderators Note : Reference to illegal third party flashing software removed. Please do not discuss third party flashing software on the official nokia forums.
    Solved!
    Go to Solution.

    Cartier001 is right to point out that no FP2 variants have yet been produced for Hong Kong, Taiwan (where I live) or the  PRC. One explanation for this is that FP2 makes fundamental changes to keyboards, and these three variants obviously all have Chinese input, which may need extra testing etc. Another possible explanation is that we are not regarded as important enough. Annoyingly Nokia plugs FP2 on the support sections of its web sites in these countries even though it is not available.
    Effortful is unfortunately correct to point out that lots of people still do not have FP1. There are lots of posts about that here. This thread (one of many on the subject) is one that I started and has regular new posts of users who still haven't received it.
    http://discussions.nokia.com/t5/Software-Updates/Nokia-603-700-or-701-without-FP1-please-post-countr...
    Adrianhughes is right to say that availability of Nokia's updates depends on country and operator variants, but wrong in suggesting that it would be any use to contact your local Nokia care. Unless there really is some technical problem with your phone, they invariably just tell you to keep checking.
    FP1 was not delivered in Taiwan unti more than six months after it was announced. I wrote to Stephen Elop to complain about the poor service in this respect four months after its first announcement and got an email back  from him the same day, followed by a call by someone very polite but with no concrete information. I wrote again two months later and got no reply from Mr Elop, but I did have a call from Nokia less than a week later saying that the software had eventually been released for my phone. 
    Concretely my advice to people in Sri Lanka is to try and find out whether your country has its own Nokia phone variants (Nokia care or your operator might tell you this, or you might find it on the internet somewhere) or whether you use Indian phones. If you have Indian phones then FP2 should be available and you should ask your operator where it is.
    My adivce to Effortful is to kick up as much fuss as possible, here on these boards, with your local Nokia care and by writing to the head of Nokia in the US or to Stephen Elop if you have to. It really is disgraceful that FP1 is not available yet and that noone is willing to say why not or when it will be. I would do this, but as I have it now, I am arguing from a weak position.
    Unfortunately, those of us in China, Hong Kong and Taiwan will just have to keep on waiting for FP2; we waited more than six months for FP1, so the current delay hasn't really registered yet.
    Alan

  • Belle fp2 for n8

    I guess every n8 fan would love their phone updated to belle fp2!!

    hi Alex2Gud666,
    sounds like you did something as stupid as hacking the firmware of your phone and playing around with it, and have now damaged other components of your phone. Discussion of non-official methods of modifying your software / hardware of your device is not permitted on these forums, so you will need to take your query elsewhere.
    you can try your luck at Nokia Care, but not sure if they will help as you have voided your warranty: http://nokia.com/support

Maybe you are looking for

  • Add new row in the same page

    Can anyone give me the code for adding the new row in the same page itself.If we click on add button a new row should come in the table. Thanks in advance

  • How do i log into my itunes account from my windows computer?

    I have downloaded Itunes but am not sure how to log into my account. I broke my iPad recently and would like to listen to my music on my computer.

  • Is it possible to send a copy of invoice as PDF files to sales agents

    Hi All, Please let me know my client needs this below requirement, Is it possible to send a copy of invoice as PDF files to sales agents by e-mail triggered by the invoicing or is it only possible manually through ZPDF? Best Regards Aditya

  • IS-Retail: Material description in MM41and MM42 transactions

    Hi, I'm not able to see the material description in the basic data view, in transaction MM41 and MM42. I have already inserted the field MAKT-MAKTX as a mandatory field(OMSR & OMS9), but i still can't see him. Somebody can help me? Thank you very muc

  • Handling error msg in JSPDynPage

    Hello,    I am doing a replica of an SAP R3 std report in portal. I've converted the report pgm to a BAPI. My question is how to populate the BAPIRETURN table with the error messages raised from a std report? I mean how to capture these error message