Issue with extra levels when merging projects
Hello all,
(note: working with RH5 and MS HTML help files)
I've created a new project that needs merging into our main
help system (which already consists of 20-something projects). The
issue I'm having is that RH5 seems to be adding several layers to
the TOC.
Originally, the new project had the following layout:
Project Book
-project overview page
-Application A book
-Application B book
-Application C book
-Application D book
When this was linked to our main project and then the main
project was compiled, the TOC looks like this:
Project Book
- Project Book
-- Project Book
--- Project Book
---- Overview page
---- Application A Book
---- Application B Book
---- Application C Book
---- Application D Book
To me, there are at least 2 unnecessary levels inserted into
this. I tried to alter this by removing the Project Book from the
Project chm, so it was just:
-project overview page
-Application A book
-Application B book
-Application C book
-Application D book
However, this did not remove any of the extraneous levels,
and in addition the Project overview page is now accessible only by
clicking on one of the middle Project books (i.e. it previously was
its own page that could be directly clicked on in the TOC, and now
it no longer shows there).
Any thoughts on how/why these extra levels are being
inserted? I'm fine with it an extra level, like
Project Book
- Project Book
-- Overview page
-- Application A, etc.
Having 2 or 3 extra levels, however, is a bit much,
especially since RH seems to be adding them itself.
Hi, Tech Writer KC,
I don't know if this has been fixed in recent versions of
RoboHelp, but I believe there was a long-time bug in RoboHelp
— and in HTML Help Workshop, too — where the Include
statements for the secondary TOCs were written at the wrong level
in the master TOC. You can read a little more about this in the
"Known Bugs" section here:
http://helpware.net/htmlhelp/how_to_merge.htm
Many people worked around the problem by using FAR to edit
the master TOC.
http://helpware.net/FAR/index.html
Pete
Similar Messages
-
Hi BC,
I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
This is causing us mayhem.
We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
JoHi there,
The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish. -
URGENT HELP PLS : Issue with Multi Level Master Detail block
This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid. -
Issue with Emoji icons when sent from iOS6 to iOS5
Issue with Emoji icons when sent from iOS6 to iOS5, all icons appear as a square on the iOS5 message screen.
Both iOS are the current version and the phones are 4S 64GB
Anybody got this problemHi!
What kind of RFC do you use? If you use synchronous RFC the caller waits for the answer/result of the called function. In normal cases this should solve your issue.
Regards,
Volker -
Hello experts,
For this thread, please check the following link:
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Thanks and Regards,
Daniel.Hi Experts,
The question has been answered as per the following "link":
[Issue with BAPI_ACC_***_TRANSFER_POST (when trying to execute as per ABT1N);
Daniel -
i have an issue with speaker/microphone. when i call or i recive a call the person on the other side can not hear me.
Hello aalapdesai112,
Lets see if we can get you back to taking calls normally again. Start your troubleshooting with the article below and go through checking to making sure that you are up to date with your iOS as well as a simple restart on your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Regards,
-Norm G. -
Issue with Building OLAP Cubes in Project Server 2010
Hi
There is some issue with while building OLAP cubes.
I have created OLAP cube then successfully cube has builded. When i add resource level custom field which has lookup tables values in ASSIGNMENT CUBE then getting cube failure meesage.
I deleted and recreated custom field and lookup table but no luck
Below error message from manage queue jobs
General
CBS message processor failed:
CBSOlapProcessingFailure (17004) - Failed to process the Analysis Services database <DB NAME> on the 10.3.66.12 server. Error: OLE DB error: OLE DB or ODBC error:
Warning: Null value is eliminated by an aggregate or other SET operation.; 01003. Errors in the OLAP storage engine: An error occurred while processing
the 'Assignment Timephased' partition of the 'Assignment Timephased' measure group for the 'Assignment Timephased' cube from the <DB NAME> database.
Internal error: The operation terminated unsuccessfully. Server: Details: id='17004' name='CBSOlapProcessingFailure' uid='f2dea43a-eeea-4704-9996-dc0e074cf5c8'
QueueMessageBody='Setting UID=afb5c521-2669-4242-b9f4-116f892e70f5
ASServerName=10.3.66.12 ASDBName=<DB NAME> ASExtraNetAddress= RangeChoice=0 PastNum=1 PastUnit=0 NextNum=1 NextUnit=0 FromDate=02/27/2015 02:10:15
ToDate=02/27/2015 02:10:15 HighPriority=True' Error='Failed to process the Analysis Services <DB NAME> on the 10.3.66.12 server. Error:
OLE DB error: OLE DB or ODBC error: Warning: Null value is eliminated by an aggregate or other SET operation.; 01003. Errors in the OLAP storage engine: An error
occurred while processing the 'Assignment Timephased' partition of the 'Assignment Timephased' measure group for the 'Assignment Timephased' cube from the
<DB NAME> database. Internal
Queue:
GeneralQueueJobFailed (26000) - CBSRequest.CBSQueueMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='b7162f77-9fb5-49d2-8ff5-8dd63cc1d1d3'
JobUID='76837d02-d0c6-4bf8-9628-8cec4d3addd8' ComputerName='WebServer2010' GroupType='CBSRequest' MessageType='CBSQueueMessage' MessageId='2' Stage=''.
Help me to resolve the issue
Regards
SantoshIs the SQL Server and Analysis Server are running on different servers and not on default ports?
If yes, then check if the same alias’s name added in Project Server is added on the Analysis Server.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread. -
Issue with Clipping Mask when scrubbing timeline
Has anyone encountered an issue with editing a clipping mask or repositioning it on the timeline only to see that nothing moves on the timeline when scrubbing the playhead?
This has occurred multiple times on different Edge Animate projects.
So far this has happened on SVGs, pngs, basic shapes, etc.
I posted a video in my adobe cc folder to view as a reference.
I'm using OS X 10.10.3 and Edge Animate 2014.1.1I right click on the clip in Timeline, choose Effects Mask > Apply
The rectangular mask appears on the screen, I drag one corner in to make it smaller - what the exact dimensions are I know not. The logo I need covered happens to be almost at the exact center of the screen.
I choose the EDIT Tab > Brightness/Contrast > Set the levels so the mask is perfectly white (thus, covering up the logo) > Apply > Done
The preview works. When I output as AVI, MOV, MPG, MP4, etc., the mask that I placed over the logo has now moved either above where I originally placed it or above and to the left.
I have no idea how to answer the second part of your question. -
Issue with PO Currency when currency changed after the approval.
Hi All,
we have get an issue with PO currency which is as follows
Step1:Created a Limit PO with value 3.701,00 CHF and sent it for approval,,and PO is approved and transfered to backed (We are using "Extended classical scenario' .
Step2:but we got to know that the PO value should be in USD ,so will go to PO and changed the currency value to USD ,it coveted value to 3421 but ,since i need the 3701 USD i changed the value to 3701 at item level and orderd the PO.
but after approval , when it transfered to backed it is showing the value 3.701,00 USD at header level ,but 3.402,84 USD at item level.
so when we are trying to create GR it is populating 3.402,84 USD but we need 3701 USD.
is any one know the what is the problem with this.
please help
Regards
cbYou can re-output a message that has already been outputted (printed or transmitted).
"Repeat message" function
You use this function if you wish to print out or transmit again a complete purchasing document that has already been outputted. Note that the system takes account in the message of any changes made to the purchasing document since it was last outputted - i.e. the system always outputs the current status of the document. If you wish to have old statuses available, you must optically archive the purchasing document.
Activities
You invoke the Messages screen as follows:
Via the purchasing document itself (Header Messages) or
Via <Purchasing document> Messages Print/transmit.
Enter the processing status 1 (successfully processed) and display the messages.
Select the desired message and choose Goto-> Message details.
Choose Edit-> Repeat message or Change message.
The system inserts the new message. If a change message is involved, the system sets the Change indicator.
Save your data.
Hope you find this useful.
Edited by: Reetesh on Dec 3, 2011 7:36 PM -
List of issues with patch level
Is there a list of application errors reported for each patch level?
When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?There are also notes for those Lists of issues with each patch level for B1. What is your B1 version and PL?
Thanks,
Gordon -
URGENT: Issue with hierarchy level keys and report drill down
Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks -
Stalling issues with iMovie 08 when publishing/exporting. Very frustrating.
Hello-
I am having a really hard time with publishing/exporting from iMovie 08'. It hangs or stalls right when it gets to the end of exporting a project. I have the newest update (7.1.2) and it was just freshly installed from the startup discs that came with my macbook pro. The weird thing was that i think before i updated the OS to 10.5.3 i was able to publish projects as I have one that is exported.
Has anyone else had this problem? I searched the forums and people have issues with it stalling at other places but I didn't come across stalling problems at the same time.
What can I do to fix this?
Any help on this issue would be much appreciated.
Thanks.Hey guys I am really hoping someone can help me with this issue as I am trying to put a DVD together for a group I traveled with and I feel like I have tried everything.
Has anyone at least the same problem? I just feel frustrated because I spent numerous hours creating 6 projects to put on a DVD and the **** thing won't export to iDVD, Final Cut Express, or anything. I just don't want to lose my work and start from scratch in FCE.
I paid for this **** product and it should work!
Are there any programs that will somehow import an iMovie project that hasn't been exported?
I can't export on any format (avi, quicktime, mpeg4, etc.) and am getting desperate, haha.
Thank you for any help. -
Issue With Page Break When Sorting is also applied on group
Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumarHi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha -
Issue with instant ringback when using sip trunk to SP
Hi all,
We use CUCM 8.0.2.
We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
c2900-universalk9-mz.SPA.150-1.M3.bin
Cisco CISCO2911/K9 (revision 1.0)
Technology Package License Information for Module:'c2900'
Technology Technology-package
Current Type
ipbase ipbasek9 Permanent
security securityk9 Permanent
uc uck9 Permanent
data None None
We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
We use 7945 and CIPC for our phones.
We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
Any ideas why this happens and how to stop it?
I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
voice service voip
address-hiding
mode border-element
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
header-passing error-passthru
early-offer forced
midcall-signaling passthru
interface GigabitEthernet0/0
ip address x.x.x.x 255.255.255.252
ip access-group acl.SIP-IN in
no ip redirects
no ip unreachables
ip verify unicast reverse-path
ip virtual-reassembly
duplex full
speed 100
no cdp enable
gateway
timer receive-rtp 1200
sip-ua
connection-reuse
gatekeeper
shutdown
dial-peer voice 1 voip
description *** INBOUND CALLS FROM CARRIER ***
translation-profile incoming SIPTRUNK-INCOMING
session protocol sipv2
incoming called-number #blah blah#
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 61 voip
description **** WA, SA AND NT NUMBERS ****
destination-pattern 0[8]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[8]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 81 voip
description **** MOBILE NUMBERS ****
destination-pattern 0[4]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[4]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 500 voip
description *** INBOUND SIP TRUNK TO CUCM PUB ***
translation-profile outgoing SIPTRUNK-CALLING-ADD-0
preference 1
destination-pattern 5[12]..
session protocol sipv2
session target ipv4:<OUR CUCM PUBLISHER IP>
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
Any help or a point in the right direction would be greatly appreciated.
Cheers,
BrettI ended up resolving this issue as follows:
In CUCM, under Device > Device Settings > SIP Profile.
I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
Now, I get the expected delay before hearing ringback.
Solved! -
Issues with my connection when gaming (Insurgency)
Hello,
I just bought the MSI GT72 2QE. I am very pleased with de specs like the Geforce GTX 980m and the i4710hq but there is an issue that is bothering me some days now. When i am playing my beloved game Insurgency, i get ping spikes all the time. So i followed up some instruction on uninstalling the Killer software suite and just installing the drivers when i encountered the next problem. My Killer Wireless-n/a/ac 1525 Wireless Network Adapter couldn't find the drivers in the 'drivers only' package. But i did my best to find other drivers and accomplished after 5 hours full of frustration. So that is done but still doesn't solve my problem.
I don't know what to do anymore and I'm starting to think that maybe my Killer Wireless-n/a/ac 1525 Wireless Network Adapter is the issue. Maybe this is a hardware issue. I contacted the store where i bought it and they will contact me in 48 hours with a possible solution but the guy said that after all my effort it seems like a hardware issue indeed. You guys are my last hope or my laptop will be gone for 3 weeks at the factory.
Video of ping:
nl.tinypic.com/r/ztisd1/8
I hope someone has the solution.
Excuse me for my incorrect English, it's not my native language.
Bye!Thanks for your reply.
I'm glad (and I'm not glad for the others..) that I'm not the only one. But it's not because there are more devices connected to my router because I am the only one now and I'm still having this problem while my other laptop doesn't have any problems at all. I've tried everything so far now. Resetting my router, restarting my router, reinstalled windows, reinstalled drivers, got rid of the software suite, turned off firewalls, virusscanners etc. Everything.
I thought it was only with Insurgency but it's also bugging me with Battlefield 4.
So i have tried and done everything i could find on every forum on the internet. Still I don't get the download/upload/connection I am used to when using wireless. When i am in my room, which is 10m away from the wireless router, my download speed is max 1200 kb/s where I would easily get 2300 kb/s. Also when playing online games I am having big issues with my latency/ping. It goes from 60 to 200 to 400 and back every 15/20 seconds. I also own a Asus laptop and I don't have any issues at all with the wireless connection. When I am in my room there are no problems at all. I am starting to think that the Killer Wireless adapter is just a f*cked up thing. I bought a laptop (GT72 with 980m) for €2300 but I am having all these issues with the connection. It makes me really frustrated.
Longer vid of ingame netgraph:
nl.tinypic.com/r/97mjae/8
I am hoping that there is something that solves my issues. I'm starting to think that another wireless network adapter from another brand is the only option. Is there an option to change the wireless network adapter on my laptop because I will if I can. This piece of sh*t needs to be replaced.
Bye
Maybe you are looking for
-
YOGA 2 - 1051F Windows 8.1 Dual boot Android
Hello, I have a YOGA 2 Tablet 1051-F under Windows 8.1 and I want to install Android in dual boot mode. I made an USB stick bootable with Android IMG but the tablet don't want to boot on it. I checked the UEFI and Secure is OFF --> no succes. I also
-
Failure of archiving to standby causes connection timeouts
Our primary database has encountered errors caused by a full disk at the physical standby system. The errors in alert log file and trace files looked like this: ARC1: I/O error 272 archiving log 9 to 'tifltsb2' This destination is not mandatory so I
-
Change Font Size of iView Tray Header
Hi All, I need to change the font size of the iView Tray Headers in my Portal and I can't seem to find this property in the Theme Editor. I have had a look at the following threads: How to make iview header ? and Changing the font size of the iview t
-
Library upgrade in progress ..... zzzzz
Don't know about anyone else's experience yet, but the first thing LR does is upgrade your old library. Right now, I am well into my second hour of waiting, so get ready for a long evening. I'm on a MAC G5 QUAD with 4GB of ram. My library has close t
-
Accessing third party code from JNI. URGENT !!!!
Hi, I have to use a .so library (Solaris) from another company. As this library has not the correct syntax to be accessed from JNI, I made another .so that calls it. For compile this library I just need the header file and I can compile it succesfull