Issue with Keyboard Viewer

I won't apologize for the cross-post because even though the following got a 100 views, it generated no responses in the MacBook forum. Maybe now that Eric is back from the Super Bowl...(:>)
I'm trying to verify that Keyboard Viewer works the same in MS Word on an Intel Mac as it does on a G-4 and G-5? It works fine in Text Edit for example, but when you click in a Word doc, the keyboard reverts to English, but will create most French characters. On the PPC's, the keyboard stays in French.
I have Word 10.1.6 on all three.
I have Mac OS 10.4.6 (.8 now) on the Intel and .8 on the PPC's, but Keyboard Viewer worked fine up through Tiger updates.
I have verified preference settings in Word.
I have trashed .plist files, although the Word file does not seem to re-gen itself?
I have verified that International settings are identical.
And of course, repaired permissions.
Thanks for the look,
Joe

Turns out to be a Rosetta issue.

Similar Messages

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

Buggy issues with keyboard buttons.

Getting constant issues with keyboard keys in Photoshop. Delete key does not delete layer, Fill layer (Option Delete) only works when I change tools. And it does this intermittently. It's very annoying!
Anyone else have these issues? These are just some of the issues that pop up.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Issue with Tree view

Hello experts,
I am facing a very strange issue with tree view.
I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen.
I am sure about the data because, when I am selecting a line from the tree, the data from that line is coming to the main screen.
Please help!!
Regards
Debolina

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

Issue with Keyboard Special Characters in HP Pavilion DV6-3004TU

I am using a HP Pavilion DV6-3004TU notebook. I just had my Windows 7 Professional installed. When I @ using Shift + 2 it displays " (quotation marks). It is vice-versa as well, ie., when I type " using Shift ' it displays @ symbol. I as well have issue with typing the hash symbol. When I type Shift 3 it displays £ instead of hash symbol. This is a brand new laptop and I am using an external USB keyboard as well for my convenience. This problem is encountered in both keyboards (notebook keyboard and external keyboard) as well. What do I do now? It has become a literal mess with characters making it difficult most of the times. Kindly help
This question was solved.
View Solution.

That looks like keyboard layout issue...Looks like your keyboard is set to UK english...to check that...
To check that, Click Start, type intl.cpl in the Start Search box, and then press ENTER. On the Keyboards and Language tab, click Change keyboards.
You should see 2 entries English (united States) and English (United Kingdom). If true, delete English (United Kingdom). That should take care of it...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Word with keyboard viewer

Even though I have selected U.S. English and Spanish in international system preferences so that the flag symbols appear in the menu bar, when I use Word or AppleWorks, the keyboard viewer will not change to Spanish. The flag of Spain appears in the menu bar, but the keyboard viewer continues to display U.S. English. In the Finder, the keyboard viewer changes languages as it should. If I switch to Word or AppleWorks, it inexplicably reverts to U.S. English, but I want the keyboard viewer to function in Word or AppleWorks. How do I fix this?

Since there's been another 6-month delay since the last posting on this thread, I'll add my plea for some solution to this problem. tyrollifer's stop-gap method is a helpful suggestion, but could someone offer a solution that allows live feedback using the keyboard viewer with Word?
I've also found the following discussions about this problem...all without any real solution. Is the only option really to stop using Word and install a different word processor?:
http://groups.google.com/group/microsoft.public.mac.office.word/browse_thread/th read/142d8f1a8ce9a4f7/e1a19a315ba7a679?lnk=gst&q=internationalkeyboard&rnum=8&hl=en#e1a19a315ba7a679
http://forums.macosxhints.com/archive/index.php/t-71606.html
Message was edited by: ekminaa

Issue with Adobe Viewer.

I am a Coldfusion developer. I have an application that takes some coldfusion variables and populates a pdf form that was created in LiveCycle. In the past this worked fine. Today someone told me of an issue they are having. Now when the view this pdf in a browser the fields are not populated. This is a major drawback from the way things use to work. Is this a bug or did you intend to do this?

Yes, I have tested on Chrome, Firefox, Safari, Opera and IE. It does not work in Firefox 19 or in Chrome 25. In Firefox I only get the hard coded text of the form. In Chrome I get the placeholder text in the form fields. Firefox shows a yellow message at the top "This PDF document might not be displayed correclty." and their is a button labeled Open With Different Viewer. Some of my users are not very tech savy and may miss that option. I am populating the form using the cfpdfform tag with an action of populate on a pdf form created in live cycle. I use the cfpdfformparam tag to put the values in the fields.

Performance Issue with PAY_BALANCE_VALUES_V View in Oracle R12

Dear all ,
We have recently upgraded from 11i(11.5.10.2) to R12(12.1.3). We are facing one Issue with slow performance of the queries where PAY_BALANCE_VALUES_V is used. We have so many reports & logic in Payroll which uses this View.
In 11i this works fine, however in R12 it takes very long time. There are no configuration changes we have done from 11i to R12.
Is there any way to optimize the performance or alternate way to retrieve the Balances Data in Payroll ?
Any heads up would be highly Appreciated.
Thanks,
Razi

Hi Razi,
The balance related performance issue is written in the following note.
Note:1494344.1 UK Payslip Generation - Self Service Program Takes Much Time To Complete (Performance Issue)
This issue was fixed in HR_PF.B RUP6 or patch:14376786. Did you apply this patch? If not, I suggest you apply it.
Also, HR_PF.B RUP6 has some balance related performance issues.
If you already have applied HR_PF.B RUP6, I suggest you log a SR with SQL trace.
Thanks,
Hideki

Issue with Smart View when trying to connect to Planning/Essbase

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. In Excel, I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names. Pls. advice

I was trying for shared conenction this morning and it was not working. Now all of sudden it started working. Even i've checked now, the private connection is also working fine with the URL http://planningserver:8300/HyperionPlanning/SmartView

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Issue with Sales Views in MM01

Hi gurus,
We need to create a material with only views for Basic Data 1&2, and Sales Org. Data 1, Sales Org. Data 2 and Sales General Plant data.
The sales organization is created but when trying to assign the material (with existing Basic Data 1&2) to the Sales Organization the system is giving error "sales org. and distrib. channel invalid sales area".
Any idea what additional settings are necessary to assign the material to the sales org. ?
Thanks!
VL

Sales organisation itself is not enough, you have to define distribution channel also:
SPRO > Enterprise Structure > Definition > Sales and Distribution > Define, copy, delete, check distribution channel
Distribution channel has to be assigned to sales organisation:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign distribution channel to sales organization
Division should also be defined and assigned:
SPRO > Enterprise Structure > Assignment > Sales and Distribution > Assign division to sales organization
It's starnge that you want to create material master and still your config has such serious deficiencies...

Planning Data from formatting issue with Smart view in 11.1.2

Hi,
We are facing one strange issue in Smart view.
We have created a dataform in Planning as follows:
Columns:
FY10 FY10 FY10
Budget Budget Budget
Jan Feb Mar
But when we open this in Smart view, we are getting the columns as follows:
FY10
Budget
Jan Feb Mar
i.e. year and scenario are spreading across months instead coming at each column level.
We are using Hyperion Planning 11.1.2, Smart View 11.1.2 and Office 2003.
Please help us.
Thanks,
Naveen Suram

Are you saying you want the dimension members FY10 and Budget to be repeated in each column?
I think that can be done for Ad-Hoc Analysis mode, but not where you have opened up a Planning form.
Cheers

Issue with smart view add-in in MS word 2003

Hi,
I have smart view 9314 and office 2003 installed on my machine. I can see hyperion tab in excel and it works fine but i can't see hyperion tab in word or powerpoint. Its not in disabled items for word. I tried to add HsTBar.xla in word using Templates and Add-Ins option but it throws error: Invalid add-in. Any info to resolve the issue would be highly appreciated.
Thanks.

Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Issue with Inline View Criteria

Hi,
I have a VO created on two tables that are joined by a 1:1 association(say Opportunity and Revenue). The query is specified in Expert mode because I need some aggregations performed using analytic functions. Data security predicates are applied on top of this query using a dummy View Criteria. My requirement now is that I need to filter these results using another VC. The issue is that both the tables have attributes with the same name(say Cust ID) and I need to filter based on this using an inline View Criteria. I have done the same declaratively. However, I get an error on hitting the page saying the columns have been ambiguously defined.
On digging through the log, I discovered the test Query fails to prefix the alias before the attribute. So what I get is something similar to this
select (o.id, r.amt, sum(), count(), avg(), o.custId) from opty o, revn r where (o.id in DATA SECURITY PREDICATE) and (custId = :bindCustId)
Is there a way to ensure that the custId can be changed to o.custId???
Note - The View Criteria was created on an attribute from opty table that was exposed i.e in this case, o.custId. Although the query builder shows it correctly while creating the VC declaratively, the issue persists as seen from the logs.
Thanks,
Manoj

Hi experts...
Any pointers to this issue???
Please help!
Regards,
Debolina

Issue with Keyboard Viewer

Similar Messages

Maybe you are looking for