Issue with new user creation

We are using Hyperion Planning 11.1.1.
I am creating a new user using sharred services console and assigning a group to it which is already provisioned.
Now i am able log in using this new user to the workspace but when i open the application, it gives an error 'failed to sync with user provisioning'.
Even after refreshing the security filters in the database, i am unable to see the newly created user in the manage security filter list.
Kindly help.
Thanks in advance.

Have you checked the logs are you getting any detailed error message?
Have you tried loggin Planning application directly via 8300 port?
Is it a migrated application?
Is the direct provisioning works?
Finally if nothing works, i usually give a try to below two utilities:
http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s12.html
Cheers..!!!

Similar Messages

Business Contact Manager issue with New Users

I have an issue with a client when setting up Business Contact Manager for Outlook 2013. The client recently got a new employee and the employee was setup on an existing workstation that has BCM installed. When I launched Outlook 2013, and configured Oultook for
the new user, BCM started and needed to be configured. I went through the procedure for connecting to a 'Remote Database' on the server, typed in the server name as requested, and clicked Continue. BCM searched for the database but could not find it. The existing
user account on the workstation works just fine with BCM, and sees the remote database.
My next step was to remove BCM and re-install. This is the latest version/release of BCM for Outlook 2013. The existing user account was able to configure BCM with no issues, and found the remote database without an issue. The new user account had the same
issue as before and would not find the remote database.
I logged onto the same workstation as the administrator account we use to perform Admin tasks. I launched Outlook, configured Outlook 2013, and was able to successfully configure BCM and connect to the remote database with no issues.
I then created another New User on the server called Testaccount (TAccount), and logged onto the same workstation again, as this new user, and went through the same Outlook 2013 configuration and BCM setup. BCM has the same issue with this new user, and
cannot locate the remote database. From what I can determine, this looks to be something related to New Users that are created on the server and BCM not locating the remote database. Existing users do not have this issue when configuring BCM and connecting
to the remote database.
Has anyone had this issue or seen this issue and knows of a fix to correct this so my client can use BCM with the new user account, and any future new users they hire?
Thank you in advance for any assistance on this matter.

If you want to sync subfolders then you will need third party software. (Like Pocket Mirror)
Post relates to: None

Problem with new user creation in Oracle 10g

I have created a new user and assigned it the required privileges as shown below:
GRANTEE GRANTED_ROLE ADM DEF
SACHIN1 CONNECT NO YES
SACHIN1 RESOURCE NO YES
SACHIN1 SELECT_CATALOG_ROLE NO YES
I am able to connect to database using this user username/password but when I am trying to fire any query like one below or to access any dictionary views it shows me the error message:
SQL> select * from dept;
select * from dept
ERROR at line 1:
ORA-00942: table or view does not exist
What is that i am missing which is not set right for this user....Let me know

user8531525 wrote:
DEPT table exists as I am able to access when I login using default name SCOTT.
If its not in my schema how can i include that so that i have access to it.You can use dynamic SQL to generate a script that should work:
SELECT 'grant select on '||OWNER||'.'||TABLE_NAME||' to SACHIN1;' as script
FROM dba_tables
WHERE owner='SCOTT';
This example generates the following:
grant select on SCOTT.DEPT to SACHIN1;
grant select on SCOTT.EMP to SACHIN1;
grant select on SCOTT.BONUS to SACHIN1;
grant select on SCOTT.SALGRADE to SACHIN1;
Eg:
SQL> conn sys/oracle as sysdba;
Connected.
SQL> grant select on scott.a to rajesh;
Grant succeeded.
SQL> conn rajesh/rajesh;
Connected.
SQL> select * from scott.a;
ID
123
123
123
am able to connect to database using this user username/password but when I am trying to fire any query like one below or to access any dictionary views it shows me the error message:try
SQL> select name from v$database;
NAME
REV1
SQL> select file_name from dba_data_files;
FILE_NAME
/u01/app/oracle/oradata/rev1/users01.dbf
/u01/app/oracle/oradata/rev1/sysaux01.dbf
/u01/app/oracle/oradata/rev1/undotbs01.dbf
/u01/app/oracle/oradata/rev1/system01.dbf
Edited by: rajeysh on Sep 23, 2010 1:39 AM

Issue with new customer creation in R12

Hi
Please anyone help me out how to create new customer in R12 in Receivable module.
Thanks in advance..
Sandu..

I tried this in R12 vision.
From the main Home Page self service home page --> Receivables(Vision, USA) --> Customers --> Customers. On this page, I can see the Create button
From the FORMS --> Receivables(Vision, USA) --> Customers --> Customers, it opens the same page, but there is no Create Button.
See if the same happening in your case. May be wehn we navigage to this page from the FORM, it is going in query mode.

Intermittent OWA authtication issue for new users on Exchange 2007

Hi
We are experiencing a strange issue with OWA authentication and its happening with new users only including me. We are a small organization with approx. 70 users. Issue is with
new user accounts only.
Access to OWA stops working from any machine for the new users also they get authentication error on their phones. I have checked permissions on Virtual Directory on exchange server,
all seems to be in place. I have checked event viewer but it doesn't have any event for auth. failure.
IIS logs have the following Message,
2014-02-05 09:37:28 W3SVC1 (EXCHANGE SERVER IP) GET /owa/ - 443 myusername 77.88.97.134 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
401 1 1326
Server details
Server 2003 Ent. x64 R2
Exchange Server 2007 Version: 08.03.0342.000
IIS 6.0
Rebooting the exchange server resolves the issue sometime for 2 days sometime for 3-4 weeks.
Please advise.
Best Regards
Prabhash

Hi,
According to your description, new users cannot login OWA .
And to narrow down the cause, I recommend the following troubleshooting:
1. Check if the option"User must change password on next login" has been selected for the new users.
2. Check if the new users can login Outlook when the issue happens.
3. Check if it’s configured to use Integrated Windows authentication for OWA web site:
http://support.microsoft.com/kb/871179
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Office 2011 will not open in OS 10.9 with main user -- works with new user. Suggestions??

Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.

Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

Issues with ODATA service creation

Hi Gurus,
I am facing some issues with ODATA service creation. I have an analytic view which I want to consume via SAP UI5.
As per guides and blogs, I need to create 3 files, namely .xsaccess, .xsapp and .xsodata. I created these three files but at the same time .xsodata and .xsaccess got created at one more place. That place is my package which I checked out while creating the repository. Now when I try to activate my .xsaccess or .xsapp file, I get an error message - "The file name .xsaccess or .xsapp already exists and only 1 file is allowed per package"
for more info please revert.
Kindly help.
Best regards,
Chandan

Chandan Sinha wrote:
Can we add multiple analytic views in one ODATA service?
Certainly. You just have multiple entities then. You can even create associations between them. Here is an example that uses a combination of CDS Views, Attribute Views, and Analytic Views:
service namespace "Wile.services" {
"Wile.data.models::AN_EPISODES" as "Episodes"
keys ("EPISODE_ID")
navigates ("ToACMEItems" as "ACMEItems",
            "ToCoyoteNames" as "CoyoteNames",
            "ToRoadRunnerNames" as "RoadRunnerNames",
            "ToDirectors" as "Directors",
            "ToWriters" as "Writers");
"Wile.data.models::AT_ACME_ITEMS" as "ACMEItems"
keys ("EPISODE_ID","ITEM_ID");
"Wile.data.models::AT_ACME_CATALOG" as "ACMECatalog"
keys ("ITEM_ID")
create using "Wile.services:ACMECatalogExits.xsjslib::itemsCreate"
update using "Wile.services:ACMECatalogExits.xsjslib::itemsUpdate"
delete using "Wile.services:ACMECatalogExits.xsjslib::itemsDelete";
"Wile.data::WileECoyote.Episode.CoyoteNamesView" as "CoyoteNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.RoadRunnerNamesView" as "RoadRunnerNames"
with ("EPISODE_ID","NAME_ID","NAME")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.DirectorsView" as "Directors"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
"Wile.data::WileECoyote.Episode.WritersView" as "Writers"
with ("EPISODE_ID","NAME_ID","NAME","URL")
keys ("EPISODE_ID","NAME_ID");
association "ToACMEItems" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "ACMEItems"("EPISODE_ID") multiplicity "*";
association "ToCoyoteNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "CoyoteNames"("EPISODE_ID") multiplicity "*";
association "ToRoadRunnerNames" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "RoadRunnerNames"("EPISODE_ID") multiplicity "*";
association "ToDirectors" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Directors"("EPISODE_ID") multiplicity "*";
association "ToWriters" principal "Episodes"("EPISODE_ID")
   multiplicity "1"
   dependent "Writers"("EPISODE_ID") multiplicity "*";

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Facing error while trying login with new user

Hi All,
i have created a new user with name abcd and provisioned user with planner access.
when am trying to login in am facing error as "Application is in maintance mode new user cant login".
pls let me know how to get application out of maintance mode and login with new user.
Thanks in advance
cheers,
SM.

SM,
The error occurs when the database is in read-only mode. The database is changed to read-only when the application/database needs maintenance.
Use the following MaxL Commands to change the database to read-write mode.
login UserName Password on EssbaseSvrName;
alter application AppName load database DbName;
alter database end archive;
alter application AppName enable commands;
Hope it helps....
KosuruS

Logitech Keyboard Issues with Fast User Switching

I'm running OSX 10.4 on an 800 MHz iMac, and using a Logitech Cordless Navigator keyboard. The keyboard's main feature (for me) is the ability to have the function keys (F1-F12) automatically open applications and folders and such. When I have multiple accounts running though, this feature seems to be tied to whichever one I first logged into. If I switch accounts and try to use one of the keyboard shortcuts nothing happens where I am, but when I switch back to the original account I find that the keyboard has opened the program there. The keyboard types fine in the new account, and I can even change the preferences so the function keys do different things in the different accounts, but the extra functionality seems to be only available for whichever account logs in first.
I realize this may just be a Logitech bug, but any ideas how to fix this? (Also even though I'm the only one using my computer this seems like a mild security issue, if theoretically another user could activate programs on my account without the password.)
800 MHz iMac G4 Mac OS X (10.4.3) 768 MB RAM

Logitech support is frustrating:
Dear tajmahall14,
Thank you for your recent inquiry about your Keyboards.
I understand you are having issues with the settings for the function keys becoming non-functional when fast switching from one user account to another.
Depending on the system configuration, the Fast User Switching may or may not work. Unfortunately this is not an issue I can address. You may need to contact Apple to see if they have a possible solution to your problem.

Firefox issues with multiple users on a single computer.

I have an issue with Firefox and multiple users on my computer. There are two users setup and I'm running Win7 Ultimate x64. When the other user logs in, my settings in Firefox get screwed up somehow. Even if that user does not open Firefox.
Examples of problems this causes:
Gmail - Cannot load the standard interface, however it will load the HTML only interface.
Facebook - Cannot post anything.
vBulletin Forums - Some forums will no longer normally load - a text-only version loads as if I was browsing from a mobile device.
There may be other issues, but these are the main ones. If I clear my cookies, cache and browsing and download history, then restart Firefox, everything works again.
This seems to happen most often when the other user logs in, and uses Firefox to log on to their Gmail account.
How can I fix this?

Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

ITunes does not launch with new User Account (Vista)

One of my limited user accounts on Windows Vista because corrupt, so I created a new limited User Account and copied ALL of the files from the old to new.
Now, when I try to launch itunes on the new user account, it will not open at all. Itunes works on my administrative account, with no problem.
Can someone tell me the most pain-free way to resolve this issue. And, whatever solution, will I be at risk of losing my itunes libraries?
Thank you in advance.

Hiya. Delayed again. Browsers being cranky. (I blame the aftershocks.)
It's actually plausible that it was installed in there (by doing a run as administrator on the installer itunes64setup.exe, perhaps). Because that suggests a possible cause for these continual permissions-related problems.
A lot of what you're seeing is consistent with damaged ACLs (access control lists) on files, folders and registry keys. Although it's a lot rarer than it used to be, one of the ways you could get borked ACLs was if a program (like iTunes or QuickTime) was installed in one user account, and then the user account it had been installed in was deleted (or otherwise rendered unusable).
We don't know which particular permissions are stuffed up here. But there's a shotgun approach to fixing them which used to work okay, although it's a bit fiddlier to do on a 64-bit system than a 32-bit system.
I'd strongly recommend setting up a system restore point prior to doing this, so you can revert if things turn to custard.
The basic technique you follow is from the following blog entry *with one important modification.*
[Solving setup errors by using the SubInACL tool to repair file and registry permissions|http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-e rrors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx]
The modification is that when you're editing the file to replace YOURUSERNAME with the name of the account, edit the first line so that %ProgramFiles% instead says %ProgramFiles(x86)% and after the line that reads:
*subinacl /subdirectories %programfiles%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
... add another line saying:
*subinacl /subdirectories %programfiles(x86)%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt*
(The first is to make sure the commands see the subinacl, because it installs in \Program Files (x86)\ on 64-bit systems, and the second alteration is to make sure that the permissions for the 32-bit program files are fixed too.
After doing that (it'll take a while to run), can itunes launch normally in the new account?

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Quality issues with new Mac Mini 09?

I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
Is there anyone who's not experiencing any problems?
Sounds like it may be a hardware issue with connections... the last thing I want.
My other choice is the 2008 Mac Pro which seems trouble free.
What do you think?
Thanks.

There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

Issue with new user creation

Similar Messages

Maybe you are looking for