Issue with silent adobe elements 11 install

When looking at the article Silent install instructions | AOO volume license version | Windows
To perform a silent install I get and invalid switch when I use /UL1033 or /V"serial number"
So I tried to modify the setup.ini when I /qb to CommandLine0=msiexec /i "Adobe Photoshop Elements 11.msi" TRANSFORMS=1033.mst ELEMENTS_EN_US=1 ORGANIZER_EN_US=1 AgreeToLicense=Yes /qb
it will only install elements, and the Organizer is left out.
What is the best way for me to automate the install?
Thanks!

Only Adobe customer support can resolve activation problems. Use the "Contact Adobe" link at the bottom right of this forum page to do that.
Ken

Similar Messages

Having issue with update Adobe 11.0.06. Error 1603.

Having issue with update Adobe 11.0.06. Error 1603.

You should have gotten this information with the error: "Shut down Microsoft Office and all web browsers. Then, in Acrobat or Reader, choose Help > Check for Updates. See also Error 1603 | Install | CS3, CS4 products." Also, be sure you log in as the administrator and disable anti-virus.

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro ins

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?

It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.

I have been having issues with my computer lagging after installing lion.

I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Known issues with the Adobe CreatePDF Printer

Hi, everyone.
Hopefully if you're a subscriber to the CreatePDF service, you've discovered an incredible feature called the Adobe CreatePDF Printer. It allows you to convert ANY printable file type to PDF. You can learn more about it here. Instructions on how to set up the printer are here. It's available on Windows only.
However, I did want to highlight that there are a couple of known issues with the CreatePDF Printer which we have work-arounds for.
If you're having issues installing the CreatePDF Printer, please read this article: http://kb2.adobe.com/cps/904/cpsid_90492.html
If you've installed the CreatePDF Printer but the printer is not working (on Windows 7 SP1), please read this article: http://kb2.adobe.com/cps/901/cpsid_90130.html
Finally, if your CreatePDF Printer is appearing as "offline" in your printer list, please try this work-around: http://forums.adobe.com/message/4183649#4183649
If you encounter any additional issues with the CreatePDF Printer, please don't hesitate to let us know via this forum.
Thanks, and happy PDF-ing.
Dave, Adobe

Vertically installed super slim DVD drives are not as reliable as a plain desktop burner. I've had one fail in two of three iMacs and have always had an external which I use most of the time. Other than that, the brand new iMacs do not have a Super Drive, so if that is what you are inquiring about, the point is moot. You need to buy an external anyway. As far as speed, I have never used a burner at high speed - unless you have a professional model, you can easily get burn errors when burning at a fast speed; sometimes consumer models do well burning with high speeds , other times not.

Flash player issues with system recognizing it's installed - all versions

I am running a Vista 64-bit computer.I seem to have had lots of trouble with Adobe Flash Player being recognized by various sites (and have the same issues with other computers running both XP and Windows 7). I've downloaded, I've clicked install, it shows in the computer but the sites keep asking me to download. I downloaded 11 recently, which didn't help and later found out that it doesn't support Vista 64 bit, even though I've had Vista 64 bit for 3 1/2 years! Anyway, I uninstalled 11 and found a download for 10 and put it back to that but it still doesn't help.For example, I was looking at patterns on michaels.com and I got the message to install Flash.
Again, I have FP 10 installed (now) and would like to know if there are additional steps to take in order to get sites to recognize it is installed. Additionally, I am curious as to the short-sitedness of Adobe NOT to provide Flash Player for 64 bit Vista machines. Because Microsoft charges crazy amounts to upgrade OS, it is unlikely that I'll upgrade to Win 7 anytime soon. And since the product (Vista x64) has been around for many years, why is it treated as though it doesn't exist?

Exactly same issue here.

Issues with downloading Adobe Flash Player. Help!

I just updated OS X Mountain Lion and I'm having issues with Adobe Flash Player. I have tried downloading it several times but it hasn't taken and won't let me view any videos. How can I get it to work?

Welcome to Apple Communities
Uninstall > http://fpdownload.macromedia.com/get/flashplayer/current/support/uninstall_flash _player_osx.dmg Install again > http://get.adobe.com/flashplayer/otherversions

Excel 2010 paper size issue with PCL6 drivers after KB2592687 installed on client

When I connect to the RDS server and open Excel with the PCL6 printer and select File / Print the paper size says Custom Paper Size and I can not change the paper size here, in the Page Layout tab or in the drivers properties pages. Using the PS driver there
is no issue. I've tried using several stock PCL6 drivers from Windows 7 and have the same issue such as the HP LaserJet P4014/4015 PCL6. Using the Lanier LP131n PCL6 or PS I had the issue with PS as well.
I do not have the drivers loaded on the server so it is using Remote Desktop Easy Print. If I do load the drivers and allow it to use them then there is no issue but I cannot configure the printers options without taking ownership of the printer so that
is not desirable.
If I do not install KB2592687 then there is no issue, but that is not an option as I am dealing with a customer who's IT manager refuses to remove this, even to test it, and says our printer driver has the issue and is not compliant with MS TS.
Could I be missing any configuration, hotfix, policy that could explain this issue or any other workaround? Or is there a change required to our printer driver for this?
Test setup:
I created a new Windows Server 2008 R2 Standard server with SP1, Added the RDS Role, Installed Office 2010 Professional with SP1 using the Terminal Services product key. No updates were installed. I have tested installing every possible update as well for
both Server and Office.
I then created a new Windows 7 Professional x86 with SP1 client, installed PCL6 & PS printers, installed KB2574819 and KB2592687. No other updates were installed. I have tested installing every possible update as well.

Hi,
Did you find any particular Event ID for your issue?
To troubleshoot this issue, have you tried changing the default printer and printing from other programs such as Word or any other?
The issue which you are facing might occurs because the Microsoft XPS Document Converter (MXDC) determines the paper size by using the FormID value on the server. As you commented that you are using Easy print driver first you can find incorrect paper size
if RD Easy Print printer driver first is enabled.
To work around this issue, use the forms that are defined by the system when you print. The paper sizes for these forms match on the server and on the client computer. Additionally, a printer driver can rename these forms. Please refer below article for more
information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
Apart from this providing link to understand RD Easy print in Windows 7 & Server 2008 R2.
Hope it helps!
Thanks.

Issue with selection screen element on At slection scree

Hi All,
I am facing an issue with a checkbox which is present within the subscreen of a standard selection screen.
The issue is that the value of the combobox get toggled by itselfon the event mentioned below. I am unable to find out how this combo box value gets changed by itself on the screen events.I tried clear statemetns etc nothing is helping. I debugged with a watch point on this screen element and found this to happen.It just changes the value of the element to a previously held state.I m trying to clear the combobox but this event puts back the tick mark.How can I stop this.
AT SELECTION-SCREEN ON COL_FROM. "COL_FROM is another screen element diffrent from the combobox
Thanks

Hi Vighneswaran CE,
This event corresponds to the PAI module of the COL_FROM field. So, it gets executed each time you press any valid function code on the screen (unless there was an error in a previous field). Nothing abnormal here.
That's difficult to help you on that topic, you'd better tell us exactly what report it is, where you have added your code (and what code) to change the checkbox, ...
Best regards,
Sandra

Activation issue with new Adobe form in subsequent systems

Hi All,
I'm facing an strange issue in activating Adobe form.
The new Adobe form is copied from an existing form and assigned to a new output type of PO.
After tested successfully in Dev, we transport it to Q environment and other subsequent systems
But we will always get PO updating termincation error in Q and other systems firstly.
We go to SFP transaction and regenerated the Form there once, only after that it works perfectly and no termination error any more.
I'm not sure if I missed any step to activate the Adobe form as this is the 1st time I'm working on a new Adobe form.
I did activate the Adobe interface and form before releasing and TR consistency check was also carried.
Please let me kow if you faced the similar issue and what's the possible cause?
Thanks for your inputs.
Regards
Vindy

not really, someone else mentioned that it could be done and they said they saw it before. I've been beating myself up for a while trying to figure out how to get it to happen. Is there an easy way to get the content of the pdf form into an email body with plain text when pressing a submit by email button?
Such as...
<label name>: <txtfield content>
First name: <txtfield content>
...etc..

Booklet printing issue with PC Adobe X Reader

I see that my issue was posted on April 18 by MA14urj. However, since it was never answered, I am going to post it again.
With Adobe Reader 9 - all versions - booklet printing worked great. With PC Adobe Reader X, if you try to print more than one copy, they all combine into one stapled copy. (As I type this, I am going back and forth, and printing 21 copies of a 38 page booket ONE AT A TIME).
As MA14urj wrote, "With Adobe Reader 9.4 it was working fine, since Update on 10.0 / 10.0.1 we have the error on 2 or more copys of a document they are stapled togehter, so they are useless!"
Someone please help us! Is there a solution? Is Apple working on this issue?
Thank you.

Adobe offers paid support for Reader. It used to be $39 per issue.
Reader will not change paper sizes automatically. It offers to fit the page printed to any printed sheet size. This option is fits most people's needs since they do not have two trays. Brother should offer the ability to change the paper size and tray within their printer driver.

Any compatibility issues with two X-Fi cards installed on the same syst

I'll give you a breif background on what I'm doing. I run an internet radio show, and I require three soundcards to be installed in my system. I am current running:
SB X-Fi (Non fatalty, but the full-size board)
SB Audigy2 ZS
Onboard Realtek
In the above configuration, all the soundcards are happy with each other and not bothered by each others drivers. However, I am currently toying with the idea of replacing the Audigy2ZS with an SB X-Fi Fatalty. Here's the issue, will the Normal X-Fi and Fatalty X-Fi drivers have any compatiblity issues? I dont believe they use the same software, so seperate drivers would have to be installed. With the Audigy card currently in the system, I never had to install any drivers for it as I think they cam with SP2 or something and my system automatically recognizes it with (WDM) next to it's name in device manager. I would just like to confirm this before I purchase the X-Fi Fatality.
Last question: What about another X-Fi (Non Fatalty) that uses the same exact driver that's currently installed in my system for my other X-fi. Would there be any issues with that?

I actually dont have any trouble with the mode switching right now, it works great. That's actually why I'm buying the second X-fi, so I have the ability to switch modes with the different cards. I'm not using the software that came on the CD, but the updated drivers off of the web, and there is a drop down box to change which card you want to set settings for. What issues should I be looking out for?

Issues with windows updates, unable to install certain updates

Hello, I have been having some big issues with installing a majority of windows xp updates.
Here are the updates i cannot install.
*Security Update for Microsoft .NET Framework, Version 2.0 (KB928365)*
*Windows Internet Explorer 7 for Windows XP*
*Security Update for Flash Player (KB923789)*
*Update for Windows XP (KB942763)*
*Cumulative Security Update for Internet Explorer 6 for Windows XP (KB950759)*
*Windows Malicious Software Removal Tool - June 2008 (KB890830)*
*Cumulative Security Update for ActiveX Killbits for Windows XP (KB950760)*
*Security Update for Windows XP (KB950762)*
*Security Update for Windows XP (KB951376)*
*Security Update for Windows XP (KB951698)*
My dad is also having the same issues with his mac book pro on boot camp. So i know it isnt just me.
Anyone know anything about these sort of issues?
Hope someone can help, Thanks.

I also just noticed that the net framework update that didn't install (2.0). When i checked my add/remove list it states that its already installed. Could this be an issue?

Does anyone know of any licensing issues with various Adobe shapes?

I want to use one of the Adobe shapes available in the shape palette ( paw print) for a commercial product, printing it as part of a decorative design on a product. Has anyone heard of any licensing issues with these custom shapes?

Never heard of any issues, and I’d be stunned speechless (if you know me, that means very stunned) if there were an issue. They are provided with the program to add value and allow you to create artwork, much of which is expected to be commercial. Go for it and don’t sweat.

MPS 200 with J 4.6. We are having issues with encryption and unable to install latest, J 4.7.2

We have an MPS 200 with J 4.6. We are having issues with encryption and the tech assigned to our TAC case informed us that version J 4.7.2 would resolve the issue per release notes (confirmed). Unfortunately we have been unable to install latest, J 4.7.2. Every time we select the 4000j472.tar.gz file, the MPS displays software upgrade failed. We have used IE 8, 9 and 11 and have opened them up as much as possible, still no joy. We have unzipped the file, but do not know which file to select for the install.
Would appreciate any assist.

As the others have suggested - download the file again - and check that the MD5 Checksum (with something like WinMD5) of what you have downloaded matches what it should be (for J4.7.2 is b328946e6ca24f181c937d90d8e5cc12). Then upload the .tar.gz file as downloaded (wihtout extracting it).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Issue with silent adobe elements 11 install

Similar Messages

Maybe you are looking for