Issue with Steve Muench's latest eg. How to resolve it?

I have gone through the example "Compelling Dialog" By Steve Muench. Which is available at below link
"http://www.oracle.com/technology/oramag/oracle/10-jul/o40frame.html";
This example is perfectly good even great. There are two issues with this example which i have found and need a solution for those
1. Any LOV or error message that opens from the popup is confined within the pop-up window. Resulting in ugly looks and a tedious way to maneuver. How to work this out?
2. I don't want to give any width or height for this popup. It should adjust as per the required width of the fields.
I have issues with above mentioned two problems. Can any of you come up with the solution of above two problem.
I am working with JDEV11.1.1.2.0 with ADF11g
Thank You in advance

I have had exactly the same problem now with two mini iPads.  Everything was tried; 1) restarting; 2) restoring factory settings etc.  NONE worked.  Eventually Apple agreed to replace it.  I have had the replacement now for two to three months and exactly the same thing is happening again. So off to Apple tomorrow to get another replacement.
I am quite a heavy user of the iPad so wonder if this is something to do with the fault.
It is so frustrating as sometimes reset works, and then after 10/20/30/40 minutes (you pick) it goes unstable again.

Similar Messages

  • I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one

    I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Thanks for the reply. I'll have a look at your solution.

  • I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

    adamboettiger wrote:
    Sophos and MacKeeper
    There are many reported problems with both these programs.
    Run through this list of fixes in order, will tune you right up.
    They are in order for a reason.
    ..Step by Step to fix your Mac

  • Issues with Character Pallete after latest PS CS6 update

    Since the latest update earlier this week, I've experienced major issues with the character palette - particularly the point size and tracking. The tracking issue is by far the greater of these two evils and the following explains the issues I've observed:
    tracking - the number you type isn't the number used to set the tracking. The slider and up/down arrows do not remedy this problem, though they make it slightly more predictable. The number that appears seems random, though I've noticed a pattern in some instances (typing 20 sets tracking 18, typing 40 sets it 36, typing 60 sets it 54, and so on). This issue also appears to be connected to free transforming a text layer, so the pattern is possibly based on the percentage of scaling.
    font size - the number you type works if size is increased in small increments to a certain point. Then it max's out, and this error appears repeatedly (after ok is clicked the error pops back up)
    I've searched the web for resolutions to the issue and haven't found anything. This is what I've tried and none of it worked to any lasting degree:
    - set units to pixels in preferences and restart photoshop
    - set units back to points in preferences and restart photoshop
    - restart photoshop and pc (several times)
    - shut down photoshop and pc (several times)
    - unplug pc and discharge static

    I dont know the the below link. But if you go to Photoshop .com feedback. And go to Topics>Problems and sort by most recent, these text bug topics should be on that page. (I created the last one "Scrubby Leading Bug")
    Text layer inconsistent property values (new in 13.0.5 / 13.0.1.2)
    Photoshop: Font style size problems in CS6
    Photoshop CS6: program error from vector tools, multiple text layer font size weirdness
    Photoshop 13.0.5 Scrubby Leading Bug in Character Panel (appears after Free Transform of Type)

  • I am trying to restore my iphone 4 and when it gets to the, waiting for iphone, stage he phone does not respond and it comes up with error 4005. does anyone know how to resolve this issue. thanks

    I am trying to resore my iphone 4 and the phone keeps causing an error 4005. i have updated itunes and am at a loss as how to restore phone. please help

    Hello there, Shaz18663.
    The following Knowledge Base article provides a solution for the error you have mentioned:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Particularly:
    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Q&A interview with Steve Muench published

    Steve Muench has been kind enough to allow me to web-publish a Q&A interview with him that I wrote and was published in 2006 AUSOUG Summer Foresight magazine edition.
    The article has been published here for your reading pleasure:
    http://one-size-doesnt-fit-all.blogspot.com/
    Regards,
    CM.

    nice and keep up the good work
    fadi hasweh
    http://oracle-magic.blogspot.com/
    Oracle is not Magic, it just takes years of experience

  • Issues with wi-fi on latest update

    ever since i updated my ipad 2 to the newest 6.0.1 version it will not connect manually to my house wifi. i have rebooted, removed router and then added it back on. i have tried every fix and it doesnt work.help please

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Issues with iPod Touch and latest update (4.3.3)?

    I recently updated my iPod Touch 3G to 4.3.3.  Before updating, I had absolutely no issues.  Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen.  Sometimes it will shut down in the middle of an app, I'll start it back up, and it will shut down again immediately.  Occasionally, when I start it up after crashing, it will make the camera shutter sound!  And there's no camera on this iPod!
    Possible extenuating circumstance: I upgraded from a Power PC iMac to an Intel iMac at the same time I updated the software on the iPod.  I have read the suggestions and the troubleshooting guide, and nothing has helped so far.  I wiped the iPod clean and reinstalled and all that did was wipe out my settings (of course).  Resyncing the iPod worked (apps and music loaded fine), but still it shuts down without warning.  I tried installing a new free app, but that didn't work.
    Usually I'm pretty good at figuring out these sorts of issues, but I'm at my wits end.  Is anyone else having these problems?  Am I screwed?

    Okay, so now I have read that you have to install a free app through the phone, not through the computer.  I've done so and it looks like everything is good for now.  Keeping my fingers crossed.  My question now, is that if this is a common occurance with the 4.3.3 update, why did Apple imply that I needed to wipe my iPod clean when this was the much easier and less invasive answer?

  • Is anyone else having issues with i tunes after latest upgrade?

    After downloading i tunes update, I was initally getting Error message..." The program cannot start because MSVCR80.dll is missing from your computer. Try re-installing the program to fix this problem." After several attempts to re install i tunes to fix the issue I ultimately deleted/uninstalled all apple programs from my computer and then attempted to re install i tunes. Now i continue to get "Apple application support not found." Apple application support is required to run i tunes helper. Please uninstall itunes, then install itunes again. Error #2" Can anyone out there help?? I do not know what else to do??

    Now i continue to get "Apple application support not found." Apple application support is required to run i tunes helper. Please uninstall itunes, then install itunes again. Error #2"
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT1349 My new iPhone 4S won't sync to my MacBook Pro.  I installed the latest version of iTunes but it doesn't recognize my phone when I connect with USB.  Any ideas on how to resolve this?

    It's strange, on my work issued Windows laptop I have no issues syncing my iPhone to iTunes.  But on my personal MacBook, iTunes does not pick up my iPhone when I connect via USB.  Any advice on this please?

    See http://support.apple.com/kb/TS1591.

  • Recently loaded Firefox Update 3.6.15,message appeared saying the file is corrupt. This appears to have impacted our proxy server and ability to stream video from BBC I-player? Has anyone else had this issue with 3.6.15, if so how did you resolve it?

    Received upgrade notification for Mozilla to 3.6.15 which we undertook. The computer after completing this activity now cannot stream video through our proxy provider from BBC I-player, even though we have ensured we have the latest Flash Plug-in. The system was working perfectly prior to this event. Even if we delete and re-download the update, the file loads and then when asked to run, "File Corrupt message appears. Please advise or provide solution if possible. Thanks

    Received upgrade notification for Mozilla to 3.6.15 which we undertook. The computer after completing this activity now cannot stream video through our proxy provider from BBC I-player, even though we have ensured we have the latest Flash Plug-in. The system was working perfectly prior to this event. Even if we delete and re-download the update, the file loads and then when asked to run, "File Corrupt message appears. Please advise or provide solution if possible. Thanks

  • Verizon just needs to admit the issue with the new Android release and work to resolve things

    The carrier owes it to their customers to test new os releases for phones they support.  So whether this is Android or Samsung (I have an S5 Galaxy), who might be more at fault for this horrible release, it is the carrier that all blame must fall back to.  This has to be a Verizon issue to work and quickly resolve.  I have never been on any of these forums due mainly to no need.  My galaxy was awesome and Verizon was solid.  This OS update has changet all that.  Since the update here are my issues that have been happening.  (I am sure I will discover more issues as people on these forums are pointing out.)
    Phone reboots on its own 4 to 6 times per day.
    Phone gets real hot for no reason.
    Battery life is half what it used to be.
    Charging time is much longer.
    A number of apps that never had issues now keep failing.
    Phone never used to lock up but now has been locking up a number of times and sometimes requires a reboot.
    Music apps that never had a problem now just stop playing for no reason.
    Phone seems to bog down quickly.
    All in all, this phone Android update has been one of the worst phone experiences so far.  I am not sure how Verizon can avoid taking steps to fix this and publicly acknowledge there are problems.

    Agree. Overnight my phone update locked up. Luckily I woke up and noticed it and was able to spend the time to restart the puone..then the phone was too hot and had to 'cool' then at some point it locked up again and I ended up waking 15 mins after my 1st alarm and 15 mins before my 2nd one....never went off because phone locked up. Would have made everyone late to school and work. Today my phone is running all kinds of apps I never started (in the background) and battery has drained faster than ever before. I am really frustrated that the only help I get is to disable these apps or reset the update through my computer. Since others are having similar issues, I'm convinced the problem is once again with the update. Thanks, samsung and Verizon for making us upgrade and them ruining our experience!

  • My iPad 4 says not charging but it does slowly charge . I got it replaced on sat but the new one is the same . I have tried using a different power outlet and it is the same so it appears to be an issue with the new iPad

    Can anyone help .my new iPad notes not charging when it is in fact slowly charging.  I had it replaced 2 days ago but the new one has the same issue.it would appear this is a common issue with ipad4.can anyone advise on how to get over this problem. .thanks

    Found this thread by searching the forum. I hope it helps.
    https://discussions.apple.com/thread/5471311

  • Bapi for partial good issue with ref to reservation

    I have check the bapi for goods issue with ref to reservation. But how to take care scenario where good issue qty is less than reservation qty. How to map this in bapi.
    Please provide input its urgent
    Thanks
    JENA

    Hi Jena,
    Implement a check in your program calling  BAPI_GOODSMVT_CREATE.
    If you call BAPI_GOODSMVT_CREATE in your own program you have to fill the interface of it (GOODSMVT_HEADER, GOODSMVT_ITEM ...).
    So in the first step you have to select/colect all the required data for the interface. If you want to post a goods-issue with
    reference to a reservation you can implement a quantity-check in you own program similar to the checks in transaction MB1A or transaction MIGO which lead to message M7064. All the required informations are stored in the table "RESB - Items of reservation".
    This is the quantity-check implemented in transaction MIGO (... see note 409754):
    Take only reservation items with open quantity > 0 or
       or flag 'propose all items' is set (->default settings)
         l_open_quantity = ls_resitem-bdmng - ls_resitem-enmng.   >(1)
         CHECK l_open_quantity > 0 OR
                s_defaults-propose_all_items = abap_true.
    l_open_quantity  = open quantity -> is calulated here
    ls_resitem-bdmng = Requirement Quantity ->
                        table RESB / field BDMNG
    ls_resitem-enmng = Quantity withdrawn ->
                        table RESB / field ENMNG
    Furthermore you could check, whether the quantity you want to post now is larger than the (remaining) open quantity. If this
    not the case you could add this item to the interface-data. Otherwise you can ignore it and send a corresponding message or add the item to an error-log.
    After the check has been carried out and the interface has been filled with the valid items you can call BAPI_GOODSMVT_CREATE.
    In the customizing-transaction OMCQ you can maintain the category of messages. If you set the message M7 362 to the category "E - error message" the BAPI_GOODSMVT_CREATE will return with   this (error-)message as soon as the requirement quantity is exceeded by the goods-issue("Reserved quantity exceeded by ...").
    But: other processes/applications are using these settings too.
    This means: these processes/applications might have a different behaviour after your changes (error-message instead of a warning-  message ... for example).
    I hope this helps,
    Elaine.

Maybe you are looking for