Issue with the last column stretching in ADF table

There is an issue wherein when I try stretching the last column of the ADF table to reduce its width it does stretch. But whenever I try stretching it back to this original position it doesn't despite having columnstretching attribute set to multiple and assign widths in percentages to columns . When I set the columnstretching attribute to none, the last column does stretch back and forth but on page load the table does not stretch to its full width despite having styleClass="AFStretchWidth". Now I dont want to be assigning fixed width in pixels to the columns. I would want the last column to stretch back and forth with columnstretching="multiple" and styleClass="AFStretchWidth". I see the same issue on components demo page as well. Tag Guide

If you are trying that each column gets equally stretched based on the browser, its not possible as adf doesn't supports that.
If your table is not stretching use styleClass="AFStretchWidth".
But if all your columns are not stretching you can only try setting column widths + columnStretching property (where you can specify which column to stretch to fill all the spaces)
Amit

Similar Messages

A special character in the last column in my external table

Hello,
I'v made a external table that looks like this :
CREATE
TABLE "REC_XLS"
"FINANCE_DATE" VARCHAR2(50 BYTE),
"CREATION_DATE" VARCHAR2(50 BYTE),
"SENT_DATE" VARCHAR2(50 BYTE),
"REMARKS" VARCHAR2(200 BYTE),
"REMAINING_QUANTITY" VARCHAR2(30 BYTE),
"CODE" VARCHAR2(30 BYTE)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER DEFAULT DIRECTORY "LOADER" ACCESS PARAMETERS (
RECORDS DELIMITED BY newline LOAD WHEN CODE!=BLANKS Skip 1 FIELDS
TERMINATED BY 0X'09' MISSING FIELD VALUES ARE NULL REJECT ROWS
WITH
ALL NULL FIELDS ( Finance_date,
creation_date, sent_date, Remarks,
remaining_quantity, code) location ( 'Finance.tsv' )
I exported the result in xls file and I saw in the last column a special character. The result of a copy and paste is prenseted here : "ABE
You should notice that the last quote is in the upper line instead of at the end of ABE. This means, I think, that there is a carriage return at the end. And the 0X'09' is the tab separator. How can I get rid of this character ?

my guess is that you run the load on unix server which uses default LF end-of-line character and the file has dos CRLF end-of-line, the easiest option is to change records delimiter in the DDL and replace "RECORDS DELIMITED BY newline" with code below
RECORDS DELIMITED BY '\r\n'in general end-of-line can be really any character, sample above shows CRLF but it can be TAB, space, | or any other character or set of characters. I have samples of special characters on my blog http://jiri.wordpress.com/2009/01/29/oracle-external-tables-by-examples-part-1/
hope this helps
jiri

TS4036 I have an issue with the last OS update and missing contact info on my iphone 5

Since being prompted by my iPhone 5 to do a OS update,I did so,checked where appropraite to proceed with the OS update at the prompts,screen on phone went thru a couple of iCloud questions,and I proceeded.OS downloaded,everything was I guess ok,until,I noticed that half or more of my phone contacts are missing,everything from a to k is there,everything from l to z is gone...I need those contacts restored!!! *** happened???? Where did they go,I do remember somewhere where I clicked on something to do with the iCloud,but I didn't think it would erase half of my phone contact list.I really need those phone number back.Any clues on how to restore these?? I've already sync'd my phone with my computer,and tried to figure out on my phone what to do,but no luck. Rob

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

Has anyone had an issue with the Last Software Update for Lion 10.7 causing a system to be non-bootable? As of 12 June 2012?

I recently did a Software Update of OSX 10.7.4 (on June 12, 2012). It was on an iMac 27" Mid 2010.
After the Update, the system froze on a grey screen, the update failing. The mouse was still active, but the system was otherwise frozen.
The keyboard Caps Lock light would not respond. After waiting 15 minutes, I did a Power-Off by holding down the power buttone.
Upon reboot, the system gave a "grey screen of death" with a lernel Panic, noting the following was on the screen.
panic(cpu 0 caller 0xffffff800064ba7b): "Unable to find driver for this platform: \"ACPI'.\n"@/SourceCache/xnu/xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:15 04
No safe mode.
Alt boot disk list woill not work.
Only Cmd-R to get to Revovery Boot.
I am currentluy restoring off Time Machine Backup taken earlier today.
Is this something other perople have come acress?
Would be interested to know...

Yes. Many are having this issue and it's from Apple's Thunderbolt Update which was released yesterday to support Apple's new Thunderbolt adaptors. Here is information on how to fix this issue: http://reviews.cnet.com/8301-13727_7-57451440-263/thunderbolt-update-plaguing-ma cbook-pros-with-kernel-panics/

Issue with non calculated column in a fact table

Hi All,
With 3 facts(Fact1,Fact2,Fact3) and 2 Confirmed Dimensions my joins work fine in Criteria when I include All calculated columns from facts. If I try to include a non calculated column from Fact1(Which is a number Data type) Columns from Fact2 and Fact3 show Null values. I know it is not recommended to include dimension columns in fact , does OBIEE not support Number type non calculated columns as well? Is there any work around that I can bring in my non calculated column from Fact and still get results for other fact columns.Iam at 11.1.1.7 of OBIEE
Let me know if Iam not clear.
Your help is much Appreciated.
Thanks,
Vineela.

i would like to add 2 fields into my fact tables - LOAD ID (populated by a sequence during each load) and LOAD DATE.
as these fields are not related to any reporting dimensions, it is still possible to add them in OWB ? the fact wizard always ask for a foreign key to a dimension ...
Duncan,
If you want to add non dimensional attributes to a fact by using OWB, you can create additional measures to it and use them as attributes.
Igor

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Re : Issue with the column display in Bex reports

Hello Gurus,
I have an issue with the reports in Bex, this is a bit confusing scenario I would try to explain in more details. A query was already built for monthly Report in Sales and Billing for which the variable were Calender month/year range 1 (mandatory), range 2 range 3 range 4. These 4 variable were created and moved to column rows in query.
Later the user wanted the copy of same report but he wanted the variables to be Calender date range 1 (mandatory), range 2, range 3 , range 4. I have created them with 0calenderday as reference and moved to the columns.
for the monthly report text variables were already existing for the Calender month/ year, but for the daily report text variable were not existing for Dates. I have created a text variable for the date in the following way processing by
" replacement path" and reference characteristic as 0calday and in the replacement path tab.. in replace variable the selection is info object, the next option Replace with " External charactersitic value key " .
By creating this text variable the dates were being displayed in the colum header like 11/01/2013 - 11/30/2013 which satisfies the requirement.
But the user wanted to see the report same like monthly report when the mandatory variable Calender year/ month is selected, the rest of the columns range 2, range 3, range 4 are displayed as unassigned in the report. but coming back to the daily report when the user is giving the Calender date rage 1, he is finding that Calender date range 2, range 3, range 4 are also being displayed with values. He want to see the Calender date range 2,3,4 as unassigned in the report just like monthly. Please find the images attached.
As Calender month/ year is predefined, if the calender range values are not given it would show up as not assigned default. I have created a separate text variable for Calender day, I believe that could be the reason rest of the columns are not showing up as unassigned. The user want to see them as unassigned like monthly report columns.
I tried different ways changing the text variables but I could not change the display of the columns in Calender date report by the option - replace with ----> External characteristic value key, key, label. when I chose the option external characteristic value then the date was showing up in the text of the column when report is run ( Please find the image for the reference in the attachment ). . I request you to help me out in this. Please find the images of the variables and output below.

Anshu,
Thank you very much for above code I made minor changes to the code that finally worked. I created 4 different text variables needed for Calender date range 1, 2 ,3 ,4. Please find the code below for the text variable that worked in the system
WHEN 'ZTEXT_CAL1'.
   READ TABLE I_T_VAR_RANGE INTO loc_var_range
   WITH KEY VNAM = 'ZCALDATE1'.
    IF loc_var_range-LOW = '#'.
      dt_low = 'Not Assigned'.
      dt_high = 'Not Assigned'.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ELSE.
      CONCATENATE loc_var_range-low+4(2) '/' loc_var_range-low+6(2) '/' loc_var_range-low+0(4) into dt_low.
      CONCATENATE loc_var_range-high+4(2) '/' loc_var_range-high+6(2) '/' loc_var_range-high+0(4) into dt_high.
      CONCATENATE dt_low '-' dt_high INTO l_s_range-low.
    ENDIF.
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.

Emacs is displaying the first column of the line on the last column of the previous line

The first column of my lines are being displayed on the last column of the previous line. This a very irritating glitch that I have no clue how to fix or even troubleshoot. (red bars were added using preview to hide personal info)
I've downloaded MacPorts and reinstalled emacs:
GNU Emacs 24.4.1
Copyright (C) 2014 Free Software Foundation, Inc.
GNU Emacs comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of Emacs
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
I'm open to any suggestions on how to fix this graphical glitch.
Much thanks
Message was edited by: Conner_36

Given that the Emacs for OS X works ok and the Emacs shipped with OS X works it would seem to be some issue with MacPorts and their version.
Totally unfamiliar with MacPorts so have no idea how the program gets compiled,what libraries it is using and what if any config settings are needs or set so I'm afraid I won;t be much help there. That you are on a MBP with a retina display may be part of the problem.
So with the setup you have now, hardware and software including OS, it was working and then just like that it stopped? Something much have changed around the time it stop working if you can think back to then it might help you resolve the problem.
As you are doing programming can i assume you have Xcode and the command line tools installed? If not how do you compile your code? The reason I ask is compiling Emacs from there GNU source is not all that difficult. It might be worth trying that.
One last thing given that the two other versions of Emacs displayed the file OK this strongly suggests the problem is not in your .emacs file or your environment however as I wrote I am not familiar with MacPorts so it is possible there is another config file messing you up. As a test for this create a new user or log in as the Guest user (this is best as you;re guaranteed the environment is clean) and look at the file in question in MacPorts Emacs. If it displays OK then there is something in your environment causing this, If it messes up even in the new user then I'd say ditch MacPorts..
regards
<edit>
Just to rule out init files if you start emacs with the -q(minus que) flag the .emacs file is not read in, if you use --no-site-file it will not load the site file if it exists.
I'd try running the MacPorts emacs with those two flags to see f anything changes.

Performance issues with the Tuxedo MQ Adapter

We are experimenting some performance issues with the MQ Adapter. For example, we are seeing that the MQ Adapter takes from 10 to 100 ms in reading a single message from the queue and sending to the Tuxedo service. The Tuxedo service takes 80 ms in its execution so there is a considerable waste of time in the MQ adapter that we cannot explain.
Also, we have looked a lot of rollback transactions on the MQ adapter, for example we got 980 rollback transactions for 15736 transactions sent and only the MQ adapter is involved in the rollback. However, the operations are executed properly. The error we got is
135027.122.hqtux101!MQI_QMTESX01.7636.1.0: gtrid x0 x4ec1491f x25b59: LIBTUX_CAT:376: ERROR: tpabort: xa_rollback returned XA_RBROLLBACK.
I am looking for information at Oracle site, but I have not found nothing. Could you or someone from your team help me?

Hi Todd,
We have 6 MQI adapters reading from 5 different queues, but in this case we are writing in only one queue.
Someone from Oracle told us that the XA_RBROLLBACK occurs because we have 6 MQ adapters that are reading from the same queues and when one adapter finds a message and try to get that message, it can occurs that other MQ Adapter gets it before. In this case, the MQ adapter rollbacks the transaction. Even when we got some XA_RBROLLBACK errors, we don´t lose message. Also, I read something about that when XA sends a xa_end call to MQ adapter, it actually does the rollback, so when the MQ adapter receives the xa_rollback call, it answers with XA_RBROLLBACK. Is that true?
However, I am more worried about the performance. We are putting a request message in a MQ queue and waiting for the reply. In some cases, it takes 150ms and in other cases it takes much more longer (more than 400ms). The average is 300ms. MQ adapter calls a service (txgralms0) which lasts 110ms in average.
This is our configuration:
"MQI_QMTESX01" SRVGRP="g03000" SRVID=3000
CLOPT="-- -C /tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg"
RQPERM=0600 REPLYQ=N RPPERM=0600 MIN=6 MAX=6 CONV=N
SYSTEM_ACCESS=FASTPATH
MAXGEN=1 GRACE=86400 RESTART=N
MINDISPATCHTHREADS=0 MAXDISPATCHTHREADS=1 THREADSTACKSIZE=0
SICACHEENTRIESMAX="500"
/tuxedo/qt/txqgral00/control/src/MQI_QMTESX01.cfg:
*SERVER
MINMSGLEVEL=0
MAXMSGLEVEL=0
DEFMAXMSGLEN=4096
TPESVCFAILDATA=Y
*QUEUE_MANAGER
LQMID=QMTESX01
NAME=QMTESX01
*SERVICE
NAME=txgralms0
FORMAT=MQSTR
TRAN=N
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCRQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KGCPQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPSAQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KPINQ01
*QUEUE
LQMID=QMTESX01
MQNAME=QAT.Q.NACAR.TO.TUX.KDECQ01
Thanks in advance,
Marling

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Issue with the presence indicator in list/library web part.

When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine. I can't find any errors being reported on the server.
Looking at the rendered code the list web part generates:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
Locations where the presence indicator works the code is:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead. It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
email address, not the sip address stored in the user profile. I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
in IE 9.0/10/11.
Any ideas?

We don't have a Lync server and I don't have the software available. Are you saying just having Lync installed even though it won't work might help?
I did some more digging and believe that this is an issue with the XsltListViewWebPart. If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there. Also our environment
was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part. If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
indicator does not work.
The presence control is not rendered by the xsl files used by the webpart. I modified the xsl to display the raw xml and the html code for the presence is part of the xml. I'm guessing this can't be changed and is part of how SharePoint is rendering
the data for the XsltListViewWebPart. You can see the Editor and CheckoutUser lines have the html code embedded in the data.
<Row
ID="60"
PermMask="0x7fffffffffffffff"
HTML_x0020_File_x0020_Type=""
File_x0020_Type="xlsx"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
File_x0020_Type.url="FALSE"
FSObjType="0"
FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
FileLeafRef="Database Sizes.xlsx"
FileLeafRef.Name="Database Sizes"
FileLeafRef.Suffix="xlsx"
CheckoutUser="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
CheckoutUser.id="526"
CheckoutUser.title="Ian Howe"
CheckoutUser.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/></a>"
CheckedOutUserId="526"
IsCheckedoutToLocal="0"
Created_x0020_Date="0;#2014-08-22 09:47:01"
Created_x0020_Date.ifnew=""
ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
Modified="8/22/2014 10:51 AM"
Editor="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
Editor.id="526"
Editor.title="Ian Howe"
Editor.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/></a>"
ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
I just find it strange that the old ListViewWebPart works. Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

I have an issue with the address browser in mail in Yosemite

I am using IOS 10.10.1 now on an iMac and have discovered an issue with the address browser in mail.
Previously in my pending to send email toolbar there was a contacts icon which I clicked on to display my contacts list. I could hold down the Command button and select as many contacts I wanted (often up to 100), then select the field to send (to, ccc, bcc) and the contact would appear.
Now, I have to click the + sign at the end of the field line, and select recipients one at a time. Not only that, but I have to click twice to get to the email address, once on the name and then the email address drops down under the name and then I click on the email address. When I do that the drop down box disappears and the recipient's email address goes to the field. I have tried all combinations of buttons to be able to choose multiple addresses but haven't found the right one yet.
An Apple Support guy told me to open my regular Address book, and hold down the command button to choose multiple recipients then drag them to the field on my already opened send email.
This is one way around the issue (which wasn't an issue in Mavericks) but where some recipients have two or more email addresses listed in my contacts it means I have to manually go through the finished list on my emails to make sure the most desired one was selected. What a pain.
Also, previously, where I was sending out many emails and wanted to stop say half way down my list, and send, I could come back to that list for the next email and see where I'd got up to.
I don't want to make groups because my recipients vary depending on what I am sending so my lists change constantly.
Any suggestions?
Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
Cheers,

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

How do I create a new row on tab out of the last column, last row?

JDev 11.1.2.1.0.
I've seen a few topics on this but none that I think were really very good solutions.
Use Case:
On tab out of the last column in the last row, a new row should be added to the end of the table. Bonus points for setting the focus to the first <af:inputText> of the newly created row.
Complications:
1. I'm having a heck of a time trying to find a function that returns the column's displayed index. Sadly, <column binding>.getDisplayIndex() returns -1 unless the user has manually re-ordered the column.
2. Value Change Listeners only fire if there is a value change. Guess that means I need to do client/server listeners to check each and every <af:inputText> for a tab press?
3. I'm not even going to get into setting the focus. With all the templates, regions, etc. going on, it's dang near impossible.
Any ideas on how to attack this one?
Will

Hi,
You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
Once you have created your installation, install is on your new system.
The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
Hope this helps
Ray Farmer
Regards
Ray Farmer

Finder in column view has no expander divider on the last column

I deal with a lot of graphics on my computer and I have a lot of subfolders. While in finder in column view there is no expanding divider for the last column when it is showing a graphic. When I first open a photo or graphic in finder the last column shows the graphic smaller than regular size. In SL there was a column divider to expand only that last column so I could make the graphic larger to see it better. Now in Lion there is no divider on the right side of that last column to expand the last column where the grahic is showing. In order for it to finally expand I have to drag the right side of the Finder window all the way across my display until the bottom slider bar disappears and then that last column will expand. This is frustrating having to have my Finder all across my display just to get the graphic larger.
Is there a way to get an expander divider to show up for the last column when viewing a graphic in column view? I know I can click on the "eye" icon to see it, but the column view will expand the graphic larger than 100% so I can see more details.
Thanks for any and all help.
Connie

Yes, that is how my whole finder window expands across my display until the bottom slider bar disappears....then and only then does the last column expand. I have to have open as many as 8 columns to get to my graphic. Keeping the Finder window to a smaller size and using the bottom slide bar to navigate to the far right column is nice, but all I want is that far right column where my graphic is showing to expand so I can see it better.
Thanks but what you suggest only resizes the whole Finder window until it can expand no further, then the last column expands the graphic. But then my whole display is a huge Finder window.

Issue with the last column stretching in ADF table

Similar Messages

Maybe you are looking for