Issues batch processing in cs5 Photoshop/Bridgeiiii

i recently started using cs5 and have no issues until i tried to use photoshop image processor. it keeps giving me an unable to process images message. i am simply trying to batch noise ninja and save as jpegs. i have already tried to uninstall and reinstall the programs and that did not help. any toughts are appreciated

You would probably have to write a script. You best bet is to post in this forum http://forums.adobe.com/community/bridge/bridge_scripting

Similar Messages

Bridge batch processing script for Photoshop stops after ten mins

I have a javacript to help batch process collections of images in Bridge by sending them (in layers) to Photoshop CS5. It works perfectly, except it stops running after about ten minutes (around 6-10 images) so that I have to keep restarting the script. This behaviour has only started since the script was installed in the Bridge startup folder so that it could be started from the (right click) menu. The script does not seem to time out when run via ExtendToolkit.
Does anyone know why this is happening?

Thanks again Paul. Can I ask you where the best place to insert that would be? The script is below - I'm sure you'll recognise it :6).
I've also been wondering if its possible to alter the script so that the files in bridge are opened in PS as Smart Objects (in layers)? There is a script 'Open as Smart Object in Layers' but I haven't been able integrate it into your fantastic script.
#target bridge
if( BridgeTalk.appName == "bridge" ) {
processDocs = new MenuElement("command", "Process selected docs", "at the end of Thumbnail");
processDocs.onSelect = function () {
var sels = app.document.selections;
var selectedFiles = new Array();
for(var a in sels){
    selectedFiles.push(sels[a].spec);
      if(selectedFiles.length> 1){
           var bt = new BridgeTalk;
           bt.target = "photoshop";
           var myScript = ("var ftn = " + psRemote.toSource() + "; ftn("+selectedFiles.toSource()+");");
           bt.body = myScript;
           bt.send(5);
function psRemote(selectedFiles){
app.bringToFront();
for(var f in selectedFiles){
var thisDoc = open(File(selectedFiles[f]));
/*run an action if required */
/* app.doAction("atn", "atnSet"); */
/*script listener code goes here...
You will need to remove the //===== lines or the script will fail
/* end script listener code */
      var saveFile = new File('~/desktop/'+(new Date().getTime().toString())+'.psd');
      app.activeDocument.saveAs(saveFile);
      app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);

Batch processing photographs in Photoshop Elements 11

Hi everyone,
I've been scanning in a lot of old photographs of late. Many (probably all) of them would benefit from application of the "dust & scratches" filter, but it doesn't appear as an option in the "process multiple files" pull-down. I've heard about "autohotkey" being used as an alternative mechanism for doing batch processing, but can't find an example online that works with Photoshop Elements 11. Would anyone care to share any tips on how I could automatically process my scanned photographs in ways that "process multiple files" doesn't offer?
Thanks in advance for any assistance anyone can offer.
Best regards,
Andrew.

One way which i've been doing this is to use the Image Processor script from photoshop in pse 11.
(only works in pse 11 or possibly future versions of photoshop elements)
You can download the PSE 11 Image Processor.zip, extract the file (right click on the zip and press Extract All)
https://workspaces.acrobat.com/?d=ZOP9CgDC38plXHju4uVLkQ
and then copy the Image Processor.jsx to:
C:\Program Files (x86)\Adobe\Photoshop Elements 11\Presets\Scripts (64 bit version of windows 8)
C:\Program Files\Adobe\Photoshop Elements 11\Presets\Scripts (32 bit version of windows 8)
Start or restart pse11 and in the Expert mode it should be listed under File>Automation Tools>Image Processor
(an image doesn't have to be open to run the script)
Then we just need to know if you want the Dust and Scratches to use the same settings all the time or you want to be able to adjust the filter between photos.
(so we could send you the action to use with the image processor)
The image processor is similar to process mutiple fles except you can choose to run action that you have loaded in Window>Actions on the processed photos.

Batch processing InDesign CS5 files

When I select either individual InDesign files or the entire folder to batch process to a pdf I get a message that says that the InDesign files can't be found or opened. It initially wanted to launch ID CS4 so I uninstalled that thinking that was the problem. Acrobat still will not batch create pdfs saying the application can not be found. I can create a pdf directly from the ID file but because I have llmost 300 ID files to convert I would really prefer to be able to batch create these pdfs. I am using Acrobat 9.0. Help!

To get a PDF, via Acrobat, from a non-PDF file format the file format must be supported.
Acrobat has various ways to take supported file formats and provide a PDF.
Looking at what is supported by PDFMaker
(http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html)
and at what is supported for direct file conversion
(http://helpx.adobe.com/acrobat/kb/supported-file-formats-acrobat-reader.html)
the InDesign file formats are not listed.
Based on this I'd say you are going to have to use InDesign's internal process to get PDF from the InD files.
Be well...

Batch Processing in Photoshop CS5 opens files in Camera Raw

Regarding batch processing straight from Photoshop CS5 (not in Bridge) I am unable to get the .dng files to open up without requiring that I click on 'open image' in Camera Raw. I am trying to run a simple two step sharpen plus save and close action on a batch of 700+ .dng files. There is no open command in the action. Thanks.

You probably need to check Suppress File Open Options Dialogs.
MTSTUNER

Photoshop elements 5 batch process freeze program

Starting a batch process in adobe photoshop elements 5 (auto colour, reducing picture size, saving the changed picture in the same directory but with additional extension to the filename) the program starts to open the first picture and then it is freezing. So far as I can see all other functions a working properly.
Can some one help me.
Reiner

try with just 1 image and see. Also make settings one by one i.e. in the incremental fashion. Also please explain if there is any specific meaning of "but with additional extension to the filename..".
-garry

Batch processing time lapse photos

I have a series of several hundred photos taken one a day. There is some day-to-day variation in the camera position which causes distracting jitter when run through a simple time lapse engine. There are a couple salient landmarks in each photo which could be used to auto-rotate, and (possibly auto-scale) the images if the software could be directed to recognize and align these simple features.
Thanks

There are few forums dedicated specifically to time-lapse. Try to search for timescapes.com, but it might have changed names.
Many of those artists and technicians use conventional After Effects filters or purchase special batch processing scripts for Photoshop. The scripts or filters level out those slight mechanical variations in f-stop on every frame and can help smooth out color tone issues. The output is usually converted to tiff or jpg for ease of animation and renumbered for ease of importing the sequences . Then they'll run AE's stabilizer.
Those forums also included lots of tutorials or advice on how to tweak your gear to shoot better source images that require less post production processing.
Good luck, hope you find something useful out there.

Batch processing with a re-save Script

i have a script that i use to re-save a master file that may or may not have many layers, channels and/or paths. when i have the master file open, i run the script and it flattens the image, deletes all the channels and paths, and then does a "save as" step saving the file as a tiff with lzw compression. this all takes place without any user input or dialogs. the script is copied at the bottom for reference.   i have made an action out of this script and it works fine everytime. the problem is that when i try to batch process multiple file with this action, it seems that regardless of which options i choose in the batch processing window for saving (e.g. "none", save and close", etc.), the action is interrupted with the usual "save as" dialog window and even though lzw is specified in the script, i also have to manually select this option in the dialog. does anyone know how to accomplish what i am trying to do (batch "save as" with lzw compression to files that are saved as uncompresseed tiffs) without having to stop for any dialogs? please help!!!! thanks.
johnh h.
if(documents.length){
var saveFile = new File(activeDocument.fullName.fsName);
SaveTIFF(saveFile);
function SaveTIFF(saveFile){
    tiffSaveOptions = new TiffSaveOptions();
    tiffSaveOptions.embedColorProfile = true;
    tiffSaveOptions.alphaChannels = true;
    tiffSaveOptions.byteOrder = ByteOrder.IBM;
    tiffSaveOptions.imageCompression = TIFFEncoding.TIFFLZW;
    activeDocument.saveAs(saveFile, tiffSaveOptions, false, Extension.LOWERCASE);
    activeDocument.close();

hey michael,
your reply made me curious to try something i hadn't tried before which was to run the "batch" processing from within photoshop and to my surprise it worked. however if i repeat the exact same thing from within bridge (although in bridge i am selecting multiple files instead of the enclosing folder) it runs into the same problem. so you have 1/2 solved my problem. did you actually get it to run properly from bridge (bridge/tools/photoshop/batch) or did you run it from within photoshop itself? please let me know... i am very curious to detmine the source of the problem. thanks. i appreciate the help.

Photoshop cs5 says "Place" is unavailable when I try to batch process from bridge, does anyone know what's going on?

I am trying to batch process my watermark from bridge. I have a saved action in photoshop cs5 and have used it for a while and all of the sudden it says "place" is unavailable. I have reset bridge and photshop and restarted the computer. Do actions get corrupt?

That is a very common error message actions produce when for some reason the document current state does not support the command or feature used in the action step that gets the error. With our seeing a screen capture of the error message and being able to see the document window, the layers palette and the actions palette Its not possible to tell you why the actions is getting that error message. Most likely its because of the document current state. For example place is not valid for a bitmap mode document.

Bridge will no longer batch process an old watermarking action that i made it says "place" unavailable in Bridge with cs5, does anyone know why?

I am using cs5 and in Bridge my action that I have used for 2 years all of the sudden says it is unavailable when I try to use the batch process function in Bridge. I have run updates, reset bridge and photoshop and shut the computer down. Please help if you have had this happen to you.

That is a very common error message actions produce when for some reason the document current state does not support the command or feature used in the action step that gets the error. With our seeing a screen capture of the error message and being able to see the document window, the layers palette and the actions palette Its not possible to tell you why the actions is getting that error message. Most likely its because of the document current state. For example place is not valid for a bitmap mode document.

Photoshop 7 - batch processing is no longer doing save as

I have had Photoshop 7 for many years. I have been using several resizing and sharpening batch processes which have saved a resultant file at the end with a different name. In the Batch process an original folder was selected and a destination folder and the file name changed with a different custom prefix. I have been using these batch processes with no problems for years. Without warning I have noticed that all of these batches are no longer working and the end result is one file in the destination folder, ie it must me overwriting. I have tried to recreate the basic batch process again and have resorted to using both 'save; and 'save as' at the end of the process in different test batch processes and the same result happens pretty much each time, the one file after the original folder had 5 images. I have noticed that 'Save as' is not showing up in the actions of the batch process (only shows as 'Save' irrespective if you selected 'save' or 'save as'. It is like Photoshop is refusing to accept 'save as' with a new file as a valid action. I have also tried to check the override 'save as' box etc. If you edit normally in Photoshop and 'save as' for that image, there are no problems
Going nuts as I am a team photographer for a team playing in a national competition and therefore have a large volume of images to edit/resize
cheers
Hockeysnapper

Windows XP previously, Windows 7 now (has been for about a year).
Computer is according to 'device and printers', ACPI x86-based PC, with Intel Core i5-3450 [email protected], and Xeon processor E3-1200 v2/3rd Gen Core - was all put together last year.
Drives are nowhere near full.
Only recent update has been Java on the weekend, coinciding with when I first noticed the issue.
I have deleted Photoshop 7 off the computer using Windows 7's delete program function as there is no uninstall.exe file in the PS7 folder. I deleted it out of Startup and off the Desktop. I also deleted the remaining plugin folder containing Noise Ninja anti-noise software.
I reinstalled the PS7 software again and in PS7 I expected the batch processes now to only contain the default batch processes, but all of my created ones are there in the list - this says they are not deleted in the uninstalll process. Where are these stored on your computer so I can delete these perhaps? However I am unconvinced that will actually achieve anything (see * below). I deleted a few of these using the trashbin off the Actions palette.
I created the numerous variations of the batch processes again, with 'save as overrides' box checked/unchecked and still no joy. What I have noticed it does not matter whether you used 'save as' as one of your actions it has replaced it with 'save' every time (*). How does/can that happen? All the other 'save' actions for any of the other batch processes all show as 'save' now. There is of course no option to change the 'save' in the actions to 'save as', eg right click mouse or something.
I haven't found anything related in Google searches.

Batch processing source/destination folder issues

Hi,
I am trying to set up a batch process however when I try to select the source folder I am only presented with my Desktop and 1 subfolder on my desktop. I cannot select any other drives/folders.
I am using CS3 on Vista Ultimate 64. My photos are stored in an external WD My Book Drive. I have the same problem when I try to select a destination folder.
Am I doing something wrong that I cannot see any of my other drives/partitions? I have the same issue when I try this through the Image Processor tool as well.
Thanks!

I have the same issue. I have to go to Bridge and do a batch command from there. If I choose via Photoshop, I only get the Desktop and subfolders there. Very annoying.
EDIT:
Just wanted to say that I restarted Photoshop and it now starts with My Computer. I do know this problem has happened multiple times though, and I'm not sure where along the way it changes. I'll test out what happens if I run a batch once (I usually do via Bridge), and then go into Photoshop and try to do one from there after... if it screws with the folder selection. I don't know, just a guess right now.

Batch Processing Issues - RAW to JPEG in CS3

Hi folks,
I recently upgraded to CS3 form CS2. Over the weekend, I spent several hours tweaking/adjusting about 200 RAW images in Bridge, that I need to convert to JPGs. I used a Photoshop Batch action that I created some time back in CS2 to convert the images from RAW ("Save As" as JPG), but it didn't include any of the adjustments that I made to the images during the conversion process, because I had Ignore/Suppress Open Dialog checked. I unchecked that, and re-ran the action but am now being prompted to open each image. I then modified the action to include the "Open" command. Running the script now still doesn't quite seem to work as I'd expected. The only adjustment that is incorporated is cropping, but it doesn't process any of the tonal/color balance adjustments. All images have the modification icon on them, indicating that changes were made, but the Photoshop Batch command isn't incorporating them when opened via the Batch Processing command. Any suggestions on how to get this to work?
I'm also very open to any other suggestions one may have on converting adjusted Camera RAW images to JPEG.
Thanks,
Kappabear

<[email protected]> wrote in message news:[email protected].. >I am having the same issue as the user above (kappabear)... I am going to >try the same options that PShock (Phil) gave...but what if I need to call >someone for assistance..(I'll even pay for support, because when I called >Adobe...they had no idea of what I was talking about)... Is there someone >that can give pay support??? > > I too just upgraded to CS3 and have a wedding to get out today, and 700 > images to save from RAW to JPG with many changes... Problem, I have a 6:00 > am flight to catch in the morning and I still need to pack.. (ANY HELP > from ANYONE would be greatly appreciated..) Ron, Due to news server propagation time issues, I'm seeing your post before the original one. I'm guessing others may be experiencing the same thing. Normally, I'd just wait for the earlier post to show up, but you're in a hurry. If you post again, and include enough of the post you are replying to, you may get more responses before your flight in the morning. -- Mike Russell - www.curvemeister.com

Batch Processing Raw to jpeg issue

Hello All,
I'm having issues converting raw files to jpeg using batch processing. When I go to open the raw files, bridge automatically opens an editor and I cannot record these actions within photoshop. What gives? Anyway to skip the editor or have PS record the action of me clicking "open image"? Or can I batch save within bridge to jpeg?
Thanks in advance for your help,
-FA

Yes, thanks for the help. I had done that already once without the results I wanted, it was still bringing up the raw editor. After trying it again, I realize now it only does that for the first file, the rest of the batch continues opening without bringing up the editor each time. Thanks again.

Batch processing a PDF file with photoshop droplet

hey, ive been trying and trying to make a photoshop droplet where i can drop a pdf on it and it will apply a "levels" (cmd+L on mac) change to all of the pages and re export it as a pdf.
.....i know how to record actions and create droplets but there are issues with the number of pages of the pdf and the name of the pdf
if you can figure out method for this and share that would be AWESOME!

Which version of Audition are you using? The latest ones allow you to specify where the batched files are saved and also if any Prefix or Postfix are added to the file name. These are all under Export Settings in the Batch Process pane. However you must have the Export box ticked to give you access to the settings.

Issues batch processing in cs5 Photoshop/Bridgeiiii

Similar Messages

Maybe you are looking for