Issues creating number range interval with BI transports?

Hi,
We got BI 7.0 systems in our landscape.
In developement system,our BI developer created transport with 4 infocubes.
Now, when i tried to import the transport into QA system,it is failing with the following error:
Dimension ZHR_C15P:Number range object BID0001388 created
Dimension ZHR_C15P :Error when creating interval for number range object BID0001388
Appreciate your help.
Regards
Ram

Hello ,
You can run the program RSDG_AFTER_IMPORT_FOR_CORR to correct when you get after import error .
Regards,
karthik.

Similar Messages

Change / Create number range interval

Hi All,
I have an issue with number ranges.
I am working on a global roleout and and have an issue where in DEV client my PM orders are assigned to number range 5000000 - 5999999 but from QAS to PRD this number range has been used for something else. Infact all available number ranges are taken!!!!!! Poor management I know.
How do I or can I create a new number range interval for example 20000000 - 29999999. If I can do this I can the reasigne the PM orders to this new range.
Thanks in advance
Stuart

hi
what you can do is either change the internal number range ,for example if the existing no range is from 500-1000 then you can change the ending number range say from 1000 to 9999 and assign to the particular order type
or create an new number range for the order type and assign to the respective order
regards
thyagarajan

How to create number ranges with "OK60" transaction or any other.

Hello,
I need to create a new number range to asigne to a document type , using transaction OK60 ( the error says this transaction).
but I only can display with this transaction, and I would like to update.
Is there any other transaction to do this , or is there any way to do this with this transaction OK60?
Thank you very much.
Kind regards
Olga

Hi,
OK60 indeed is used for creating number ranges for FI/CO earmarked funds transactions. You should press on 'Pencil' button and create an interval. If for some reasons, you cannot do this via this transaction, try using SNRO transaction, with IRW_BELEG parameter. If this also fails, then apply to BASIS team to check your authorizations.
Regards,
Eli

Object RV_BELEG number range interval 01 does not exist

Hi Gurus,
I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
Error Descriptio and Message:
For object RV_BELEG , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
Reporducing the error:
Screen flow: VA01 Intial Screen Input
                      Order Type: SD 'Subs.Dlv.Free of Ch'.
                      Sales Org :
                      Enter.
                      Next Screen: Click on "Complete Dlv" push butoon.
                      It will take to next screen go with "SAVE" option.
                      Iam getting an incomplete Delivery want to edit.
                      Go with "EDIT" and give Input in "ORDER REASON" drill down option.
                      select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                      Provide Input In "Customer Group" drill down option select any one option from it.
                      Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                      Here iam getting an status "Document is complete".
                      Click on "SAVE" option.
Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
This is the issue occuring with me while creating Sale Order from VA01.
help me if any one have know solution or suggestion to solve error.
Tnks & Rgds
Bhaskar

This because of the missing SD Document Number Range.
You can check this in tcode SNRO for object RV_BELEG.
Ask your SD Consultant to Change the number range assignment or create that missing 01 number range number object.
This will solve your problem,
Regards
Karthik D

Maintain number range interval "" for inventory document --help!

Dear all,
I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

1.Did u go into Number ranges for WM?
Yes
2.Did u click on assignment & number ranges not on Number range intervals
Yes
3.Di du cahnge it to 02 for all?.
Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
4.Did u select NR intervals? and give the number range?
Yes
5.Did u transport the intervals?
No, as I am working on DEV practice client. Dont need to transport.
6.Did assign the number rabges to ur Warehouse?
I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

Number range interval for characteristic 0CSTELMNTYP is missing

All,
I'm moving the infoobject 0COSTELMNT, which has as a nav attribute 0CSTELMNTYP. The transport moved fine to my Q environment, but not to prod, The error was as above and
Number range interval for characteristic 0CSTELMNTYP is missing
Message no. BRAIN049
Diagnosis
The interval for number range object BIM0001194 of characteristic 0CSTELMNTYP is missing. The interval is created automatically, when you run the system in the BW clients.
Procedure
Execute the corresponding action again in the BW clients, so that the interval is created automatically. Then you can drag numbers for the characteristic 0CSTELMNTYP to other clients.
I don't understand this - what do I need to do?
Thanks.
Dave

Hi Kedar,
I got the same issue which you mentioned and i ran the program to activate the master data object and it went fine in Quality system. But the problem here is iam unable to see the attribute data in the master data info object.
For example i added ZCNTYCODE nav. attribute to 0VENDOR and moved to quality and i got the activation problem issue for 0VENDOR and i ran the program which you mentioned in Quality and the activation went fine.
When i loaded the data for 0VENDOR iam not able to see the ZCNTYCODE data in Vendor master data P table. And iam able to see the master data in the table which we get from source LFA1 and in RSA3 and also in the PSA. Can you or anyone faced this type of issue.
Thanks for you help in Advance.
Sudhakar

How to create Number Range

Hi All Sap Experts
Please tell me How to create Number Range
I tried with the Transaction Code " SNRO "
But Im getting The following error
Dialog box title : " Buffering Methods ".
Message in the Dialog box is :
 -Numbers may be lost!
 -Do not use for Financial accounting Documents!!
?. Do you want set this Buffering method?
And another error is :
Dialog box title : " Transport number range intervals "
Message in the Dialog box is :
 The number range intervals are not included in automatic customizing changes.
 Transport all changes made within range interval maintenance must be
 triggered manually.
 In the initial screen for range interval maintenance function
 Interval --> Transport
 Please note the information that you get when transporting intervals.
So please tell me the solution for this error.
Thank you
Basu
Another is

hi,
Create number range object using OYSN.
Then call the following function modules.
FORM get_next_id CHANGING p_discrep.
DATA: last_id LIKE zrecaudit-discrep,
 quant LIKE inri-quantity, "dummy
 code LIKE inri-returncode. "returncode
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
 EXPORTING
 object = 'ZRECAUDIT'
 EXCEPTIONS
 foreign_lock = 1
 object_not_found = 2
 system_failure = 3
 OTHERS = 4.
IF sy-subrc = 0.
 CALL FUNCTION 'NUMBER_GET_NEXT'
 EXPORTING
 nr_range_nr = '01'
 object = 'ZRECAUDIT'
 IMPORTING
 number = last_id
 quantity = quant
 returncode = code
 EXCEPTIONS
 interval_not_found = 1
 number_range_not_intern = 2
 object_not_found = 3
 quantity_is_0 = 4
 quantity_is_not_1 = 5
 interval_overflow = 6
 buffer_overflow = 7
 OTHERS = 8.
 CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
 EXPORTING
 object = 'ZRECAUDIT'
 EXCEPTIONS
 object_not_found = 1
 OTHERS = 2.
ENDIF.
ENDFORM. " get_next_id
refer the links
http://www.sap-img.com/ge003.htm
http://www.sap-basis-abap.com/sapmm009.htm
http://www.erpgenie.com/abap/code/abap33.htm
http://www.kabai.com/abaps/z26.htm
Rgds
Anversha

Problem in Number range Interval in VF02

Hi All,
I am using Number range USEREXIT for invoice creation- VF01.
So, while creating invoice, userexit will trigger, as per our logic provided,system generating numbers as expected.- which is working fine.
Where as, in VF02, transaction , i was trying to release invoice to Accounting,
system prompts with the below error message.
Fyi, in my invoice doc type: Number range- interval-19, which has numbers mentioned in the error message below:
am expecting, that when i release invoice to accounting from VF02 transaction, system triggering number range from invoice doc type,- But I dont understand, why it is triggering number range interval again, for which number is already createed in VF01
Error Message:
Incorrect doc.no.: 9003000002. Select document number between 0090000000 and 0094999999
Can someone, have any inputs??
Thanks in advance

Hi,
You can make use of exit userexit_number_range inside RV60AFZZ.
Regards,
Babul.

Error :number range interval 01 does not exist

Hi,
i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
For object Z_REPORTID, number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing
Please help me to trace this out.
Thanks,
Anila

Hi
AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
Did you perform that step?
If you did that it should work well. Itried the same now and it is working fine.

Subject: Number Range interval deleted automatically

Hi
At the time of Accounting Document Posting system is giving error message for maintaining number ranges interval for the corresponding Number Ranges (For example: 50, 51, 49, 19) for the fiscal year 2010. But Number range interval has already been maintained in the Tcode FBN1 for the fiscal year 2010.
After maintaining Number range interval again for the corresponding number range in Tcode FBN1, when we are trying to post accounting document system is again giving one error message that document number (5000000000) is already been used. When we are looking into Tcode FBN1 the current number status is 0.
So to resolve this problem we have to provide the Number range status into FBN1 manually (suppose if 10 doc are already existing in the system for number range 50 then we have enter the number range 5000000010 manually in FBN1).
After Number range status setting in FBN1 System is allowing to post the Accounting Document.
Along with this one more issue is appearing related to MM posting period.
The current posting period in the system is 08/2010 and the initial period in the system is 08/2007. System is automatically going back to the initial posting period 08/2007. After opening the Posting Period with Tcode MMPV we can post the document only.
Both Issues are appearing repeatedly.
Plese help
Thanks..
BRSR

Dear If you have already maintained number range for particular period then again for same period and series system should not allow to maintain but as you said above it is allowed so i feel it was not done correctly first time and the given series number could have already been used so when changed the current number in status it's working fine.
For MM posting period issue please check transactions MMRV,OMSY,OMWD with your MM consultant
Cheers
KK
Edited by: kiran kumar on Oct 19, 2010 8:32 PM

Error in billing number range interval.

Hi,
I created a new billing type. I assigned the number range properly. But at the time of billing document generation, system is throwing a message "For object RV_BELEG , number range interval doesnot exist". I have checked in 'SNRO' against the object type 'RV_BELEG' , the number range interval that I have assigned for the new billing type is existing there. Still the error is coming.
Please suggest what needs to be done.
Thanks & regards,
Rupam.
Edited by: RUPAM KR SEN on Mar 21, 2011 10:46 AM
Edited by: RUPAM KR SEN on Mar 21, 2011 10:47 AM

Hi Samit,
Thanks a lot for your suggetion. There is an user exit but with different program name in our system. Due that user exit the customizing done by me was not working properly. The exit has been deactivated and now it's working fine.
Thanks & regards,
Rupam.
Edited by: RUPAM KR SEN on Mar 21, 2011 1:56 PM

For object RV_BELEG , number range interval does not exit

I am receiving this error when trying to generate billing document type L2 for a newly created company code.
Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
Any thouhgts ?
-Mark

Please check if the error is
"For object RV_BELEG , number range interval does not exit"
"For object RV_BELEG , number range interval 10 does not exit"
10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
Also Check
If you are using
Include program : RV60AFZZ
Routine: USEREXIT_NUMBER_RANGE
If so then for each plant you have assign a number range for each billing type (L2- here).
Thanks,
Ashish

PA04-How to make existing Number Range/interval external.

Question: PA04-How to make existing Number Range/interval external.
One of the Pernr Number ranges/interval in PA04 is Internal(box is
unchecked) and i want to make it "External" (check the box) to load some data.
Issue: The issue is, the check box is Greyed out and i can not check it. But i have access to
everything else in PA04:
- create and delete number ranges
- change the "Current number"
- Uncheck the box to make the External to Internal.
But i can not Check the box to make it External from Internal due to the greyed
out box for this number range.
The only solution i can think of about it is to - Delete the number range
and add it again and check the box when doing that. And once the Data load is done Uncheck the box.
Is there a better option..?

Once you have made your decision to define a number range as 'internal' it is not possible to reverse this. check this http://scn.sap.com/thread/1976017

Maintain number range interval for master data upload for existing employee

Hi Experts,
1)I have the scenario to upload additional data for existing employees in PA. Employees are already existed in SAP HR , But additional Infotypes are required to maintain for those emploees
2) I have the senario where i have to upload master data for new employees.
Pls give the detailed description of how to maintain number range interval i.e. External or Internal for upload in both the above scenario. Do we have to maintain number range manually in master data record & then upload it Through BDC or LSMW?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 12, 2011 3:49 PM

>
s c patil wrote:
> 2) For new employees i have to maintain desired ( my or client?) number range in SAP system as External number range & then default that number range in NUMKAR & then maintain those number range in master data record & then get the data template filled by client & then upload the data & after that create new number range which is next to existing External number range as an Internal number range. & then default that Internal number range.
>
> Pls reply ASAP
Yes Mr. Patil...
For existing employees
you need to execute HIRING ACTION Through BDC with External number range. While recording you have to use atleast three infotype i.e. IT0000,IT0001,IT0002. In addition you can upload other infotype through PA30.
For new employees
While configuration you can create another number range as internal for new hiring. and use NUMKR feature as well.
Here I don't understand that why r u looking for upload process for new hiring, if it is not mass hiring. It should be day to day activities which would be done by user through PA40.
Best Regards,
Anand Singh

Error-For object GL_LOCAL GBU1, number range interval does not exist

Hello experts
I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015. I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.
Please see the attached screenshots.
Thank you.

Hi Rahul
Thank you for your response and help. I am actually in DEV and although it says something like transporting the interval and making note of any message, the Transport option is greyed. So, I just executed tcode GB02 and went straight to Interval --> transport.
Even after tcode GB02, Interval --> Transport, I received the same error while trying to post a transaction.

Issues creating number range interval with BI transports?

Similar Messages

Maybe you are looking for