Issues in processing the Parameter as a set of values
Hi Group,
I have a requirement as under:
In my selection screen, I am using a parameter ( name : Sales order ) and on click of this, all the Sales orders and Sales order Items will be shown as :
Sales order Item
S0100 0001
S0100 0002
S0101 0001
S0101 0002
S0102 0001
Now, the user will be able to select either 1 or many from the above input help entries....
Question is, how can I process this Parameter ( Sales order ) as a set of entries ( i.e., as a table ).
so please kindly give inputs to overcome this requirement.
Thanks in advance.
Regards,
Vishnu.
Using Select Options u will get mulitiple values also u will get values like table.
regards,
kumar.
Similar Messages
-
Issues while processing the BOMs using fm ''CSAP_MAT_BOM_MAINTAIN'
Hi Group,
we are facing issues while processing the BOMs using the basic type(Z-idoc type) for standard type BOMMAT04.
thing is that the segment 'E1STPOM' is defined to contain 1 to 99999 records in it.
when an Idoc is run(say with 150/200 segments of 'E1STPOM'), there was a standard error with error message id PIC01(number : 004) when the Idoc is processed with the Standard function module 'CSAP_MAT_BOM_MAINTAIN'.
the error says 'Error reading material FING_005 . Exception: 0' and Check whether the material number is blocked. but when checked, the Material seems not blocked.
kindly advise how to overcome this error and proceed further.
Regards,
VishnuChecj the material status, while its transfer from one server to another server the status should be different
-
Issue while Processing the Huge File in BPEL
Hi,
We are facing an Issue while Processing a Hige file in BPEL Process (More than 1MB File). When i test the files with more than 1500 transactions (More than 1MB file) then the BPEL Process is automatically goes to OFF Mode or it goes to Perform Manually Recovery Queue.
Even we are facing this issue in Production also so we are using UNIX Script to Split the file before place the file in BPEL Input directory.Any Pointers to resolve this issue will be helpful.
Thanks,
SaravanaHi,
Please find the answers.
1. Currently we are using SOA 10.1.2 Version and JDev10g
2. we are using File Adapeter
3. yes. We used debatching.
4. Yes. I am able to recover from Manual Recovery Queue
5. Please find the error message
<2009-05-21 04:32:38,461> <DEBUG> <ESIBT.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 83
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> File : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B is ready to be processed.
<2009-05-21 04:32:44,077> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Processing file : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchBegin: Batch 'bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000' (/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B) starting...
<2009-05-21 04:32:44,077> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> Inside TranslatorFactory
<2009-05-21 04:32:44,078> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> using version attribute = NXSD
<2009-05-21 04:32:44,078> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> loading xlator class...oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl
<2009-05-21 04:32:44,081> <DEBUG> <ESIBT.collaxa.cube.translation> <TranslatorFactory::log> class loaded
<2009-05-21 04:32:44,081> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Created translator : oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl@46908ae8
<2009-05-21 04:32:44,098> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting up Control dir for debatching error recovery
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Control dir for debatching error recovery : /opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/j2ee/home/fileftp/controlFiles/localhost_ESIBT_BPELProcess_810~1.0_/inbound
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Invoking inbound translation for : Input5162009.B2B
<2009-05-21 04:32:44,121> <DEBUG> <ESIBT.collaxa.cube.translation> <NXSDTranslatorImpl::log> Starting translateFromNative
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.translation> <NXSDTranslatorImpl::log> Done with translateFromNative
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Completed inbound translation for : Input5162009.B2B
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> isTextFile : true
<2009-05-21 04:32:44,139> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Translated inbound batch index 1 of file {Input5162009.B2B} with corrupted message count = 1
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Error Reader created using charset :ASCII
<2009-05-21 04:32:44,139> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Sending message to Adapter Framework for rejection to user-configured rejection handlers : {
fileName=/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B, startLine=1, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11167
Error while reading native data.
[Line=1, Col=70] Expected "\t" at the specified position in the native data, while trying to read the data for "element with name HDR_STORE_NUM", using "style" as "terminated" and "terminatedBy" as "\t", but not found.
Ensure that "\t", exists at the specified position in the native data.
<2009-05-21 04:32:44,139> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting batchId in NativeRecord to bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000
<2009-05-21 04:32:44,139> <WARN> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(Object)] - onReject: The resource adapter 'File Adapter' requested handling of a malformed inbound message. However, the following bpel.xml activation property has not been defined: 'rejectedMessageHandlers'. Please define it and redeploy the business process. Will use the default Rejection Directory file:///opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages for now.
<2009-05-21 04:32:44,140> <WARN> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> [Read_ptt::Read(Object)] - onReject: Sending invalid inbound message to Exception Handler:
<2009-05-21 04:32:44,140> <INFO> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> Handing rejected message to DEFAULT rejection handler: file:///opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages since none of the configured rejection handlers [] succeeded.
<2009-05-21 04:32:44,140> <DEBUG> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> Finished persisting rejected message to file system under the name: /opt01/app/ESIBT/oracle/esibt10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/ESIBT/archive/jca/BPELProcess_810/rejectedMessages/INVALID_MSG_BPELProcess_810_Read_20090521_043244_0140.dat
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Setting last error record to : -1
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Translator has failed to translate any message from batch number: 1
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Message not published as translation failed: {
File=/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B, batchIndex=1, PublishSize=1
<2009-05-21 04:32:44,141> <ERROR> <ESIBT.collaxa.cube.activation> <AdapterFramework::Inbound> onBatchFailure: Batch 'bpel://localhost/ESIBT/BPELProcess_810~1.0//Input5162009.B2B_1242894594000' (/harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B) has failed due to: ORABPEL-11167
Error while reading native data.
[Line=1, Col=70] Expected "\t" at the specified position in the native data, while trying to read the data for "element with name HDR_STORE_NUM", using "style" as "terminated" and "terminatedBy" as "\t", but not found.
Ensure that "\t", exists at the specified position in the native data.
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleting file : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B after processing.
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleting file : Input5162009.B2B
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Deleted file : true
<2009-05-21 04:32:44,141> <DEBUG> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Removing file /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B from files to be processed Map.
<2009-05-21 04:32:44,141> <INFO> <ESIBT.collaxa.cube.activation> <File Adapter::Inbound> Done processing File : /harbinger/prod/xlate/Outbound_Input_LDS_810/Input5162009.B2B
<2009-05-21 04:33:09,698> <DEBUG> <ESIBT.collaxa.cube.engine.data> <ConnectionFactory::getConnection> GOT CONNECTION 4 Autocommit = false
For this error message this shows due to some /t its not picking up the file. but even i am facing the same issue for all the files where load is huge.
Thanks,
Saravana -
Issue when processing the variable screen Bex 7.0
Hi,
We have a issue where in a query the variables that the user selects are being ignored and the query runs wide open.
Esentially what happens is when you open a query, execute it and then close and again open a different query, the varaibles from previous query selection are carried and even if you change the variable values the user selects are neglected and query rund wide open.
Please let me know if you have encountered such an issue.
Thanks,There is no such known issue like this.
However, you can check with SAP GUI patch level, Things are working fine with patch level 8 for SAP GUI 710.
There are lot of compatability issues here and there with GUI710 with MS Excel 2003..
Regards,Vj
Edited by: Vijay kumar Nandipati on Jan 28, 2009 8:04 PM
Edited by: Vijay kumar Nandipati on Jan 28, 2009 8:05 PM -
Issue in processing the Credit Memo Request
Hi Experts,
I have a price difference credit memo request created (Order Type PR10). While processing it through VF01, it is getting updated rate (for updated materials) hence total value is exceeding the value of credit memo request.
How can I process it with the rates request was made soo that total value of both the documents remain same.
Thanks in Advance.
Regards
MukulHi
Try with Invoice Correction Request concept
Sale document Type: RK
Reference Document Type : Billing Number
for Understanding the Invoice Correction request check below link
[Creating Invoice Correction Requests|http://help.sap.com/saphelp_46c/helpdata/en/dd/55feeb545a11d1a7020000e829fd11/content.htm]
Regards,
Prasanna -
Issues in Processing the Master-Detail Form values
We have a requirement in Oracle Internet Expenses (11.5.10) to fetch the form values from the Expense Allocations Screen.
This page is based on Multiple VOs with Master Detail relationship. The data from the VOs mentioned are displayed in the Hgrid region.
I need to fetch the input values for three fields (from different VOs) and pass them as paramater to the database function to perform the validation.
Here, I am creating the handle for VO objects and using the Row object getting all rows in range (getAllRowsinRange()).
The issue here is always, the Row length() is always fetched as 1 even it has multiple rows.
Any help on this would be highly appreciated.Using Select Options u will get mulitiple values also u will get values like table.
regards,
kumar. -
Restrict the data to a set of values in the input selection
Hi,
We have a requirement it goes like this..
I've a object ZTEST which stores values (A,B, C..... Z). This object is extensively used across various DSO's and Infoset and Reports were created on top of them.
Whenever I create a prompt on this object..I get all the values ranging from (A, B,C....Z).
Now my requirement is, one of the report is intrested in only couple of values from ZTEST say (A,B,C and D). If I create prompt on this object I should get only (A, B,C and D ) in the selection screen.
Could anyone help me in this regard
Edited by: Siegfried Szameitat on Nov 3, 2008 12:07 PM
deleted points offer as it is against the rulesThanks for the update.
I am not sure on the Authorisation Relevant. Could you please expain me in detail how we could do in step by step.
Thanks in advance.
Regards,
sari -
Setting the parameter DIR_ORAHOME for a Dialog Instance
I have been advised by the SAP GoLiveCheck to set the parameter DIR_ORAHOME for my dialog instances. The Oracle home is currently on the central instance at G:\oracle\SID\102. What must the path for the parameter DIR_ORAHOME be set to on the dialog instance? (central_host\.....???))
Help.
ScottHello Scott,
>> What must the path for the parameter DIR_ORAHOME be set to on the dialog instance?
The paraemeter must be the same as on the database server itself. Set the DIR_ORAHOME in the default profile.. that is the way we do it.
For example: /oracle/<SID>/102_64
Regards
Stefan -
Setting default values at the start of a process
Hello
I need to set some constant values to the attributes in data object as soon as start event of a process is triggered.
How can I do that?
Regards
VidyadharVidyadhar,
Follow the below procedure to set Default Values
1.Right Click on Start Event select Properties
->Goto Output Mapping Tab
->Double Click on Element on which you want to give Static Value
and enter the value with double codes for eg: "Name"
Make sure that this element value should be has a Input to the next level.
Thanks
Srikanth -
Issues with processin the data in Adpater engine
Dear experts,
we are facing the below mention issues while processing the data Please let me know what we can do to resolve the issue.
"Error while reading ID of own business system from the SLD for system DX1 and client 500 Internal error in Landscape Directory"
regards
shankarHi,
As suggested by Aashish, you can go through.
It seems to like problem with SLD. It might be wrongly configured. Please check with the T.code SLDAPICUST
Regards,
P.Rajesh -
Message
Executed as user: CORPTST\XXXXX. A job step received an error at line 1 in a PowerShell script. The corresponding line is 'set-executionpolicy RemoteSigned -scope process -Force'. Correct the script and reschedule the job. The error information returned
by PowerShell is: 'Security error. '. Process Exit Code -1. The step failed.
I receive this error during the sql server job 'syspolicy_purge_history' execution when sql server got upgraded form SQL Server 2008 to 2014.Hi Vishnu,
According to the error message, it also occurs in SQL Server 2012. Here is a feedback about the error in the link below.
https://connect.microsoft.com/SQLServer/feedback/details/754063/sql-server-2012-syspolicy-purge-history-job-step-3-fails-with-security-error
To resolve this issue, please change the value of the following registry key from ‘RemoteSigned’ to ‘Unrestricted’. For more details, you can review this similar
blog.
HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.SqlServer.Management.PowerShell.sqlps120\ExecutionPolicy
Thanks,
Lydia Zhang -
How long does the parameter sqlnet.expire_time take to call pmon to release the shadow process?
Hi folks,
I had a following test on Oracle 11g in Linux 5.4(a vmware machine) for the parameter sqlnet.expire_time.
1. configure the parameter sqlnet.expire_time in sqlnet.ora and the parameter resource_limit keep false.
[oracle@orasrv admin]$ more sqlnet.ora
TRACE_LEVEL_SERVER = 16
TRACE_FILE_SERVER = SERVER
TRACE_DIRECTORY_SERVER= /u01/app/oracle/network/trace
TRACE_TIMESTAMP_ SERVER = ON
TRACE_UNIQUE_SERVER = ON
DIAG_ADR_ENABLED=OFF
sqlnet.expire_time = 1
2.connect to database server from my local 11g client(192.168.7.133).
C:\Users\robinson.cheng>sqlplus scott/tiger@ora11g
SQL*Plus: Release 11.2.0.1.0 Production on Tue Jun 25 09:57:59 2013
SQL> update emp set sal=sal*1.1 where deptno=20; ---Issued the sql to hold a lock
5 rows updated.
--disabled the network adapter in VM setting
SQL> select * from dual;
select * fromdual
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 29522
Session ID: 15 Serial number: 447
3.observe the change in database server.
SQL> @comm_sess_users;
+----------------------------------------------------+
| User Sessions (All) |
+----------------------------------------------------+
Instance SID Serial ID Status Oracle User O/S User O/S PID Session Program Terminal Machine
ora11g 15 447 INACTIVE SCOTT Robinson.Che 29522 sqlplus.exe PC39 TRADESZ\PC39
125 5 INACTIVE SYS oracle 4734 [email protected] (TNS V1 pts/0 orasrv.com
139 9 ACTIVE SYS oracle 29447 [email protected] (TNS V1 pts/4 orasrv.com
--Get the spid for user scott by SID
SQL> @my_spid_from_sid
Enter value for input_sid: 15
old 4: AND s.sid = &input_sid
new 4: AND s.sid = 15
SID SERIAL# SPID
15 447 29522
--To find the locked object
SQL> @lock_obj
OBJECT_NAME||''||LOCKED_MODE||''||CTIME||''||C.SID||''||SERIAL#
EMP 3 14 15 447
EMP 3 83 15 447
--The trace file exists
SQL> ho ls -hltr /u01/app/oracle/network/trace/s*29522*
-rw-r----- 1 oracle oinstall 241K Jun 25 09:59 /u01/app/oracle/network/trace/server_29522.trc
SQL> set time on;
10:03:46 SQL> delete scott.emp where deptno=20; --->try to issue another sql. the sql is blocked
delete scott.emp where deptno=20
ERROR at line 1:
ORA-01013: user requested cancel of current operation
--Check the server process for scott
10:04:37 SQL> ho ps -ef | grep 29522 | grep -v grep
oracle 29522 1 0 09:58 ? 00:00:00 oracleora11g (LOCAL=NO)
--Could not reach to client
10:06:51 SQL> ho ping 192.168.7.133
PING 192.168.7.133 (192.168.7.133) 56(84) bytes of data.
From 192.168.7.40 icmp_seq=2 Destination Host Unreachable
From 192.168.7.40 icmp_seq=3 Destination Host Unreachable
From 192.168.7.40 icmp_seq=4 Destination Host Unreachable
From 192.168.7.40 icmp_seq=6 Destination Host Unreachable
From 192.168.7.40 icmp_seq=7 Destination Host Unreachable
From 192.168.7.40 icmp_seq=8 Destination Host Unreachable
10:15:08 SQL> select count(*) from v$process;
COUNT(*)
27
10:17:59 SQL> ho ps -ef | grep 29522 | grep -v grep
oracle 29522 1 0 09:58 ? 00:00:00 oracleora11g (LOCAL=NO)
-->At this time the server process was released
10:18:08 SQL> ho ps -ef | grep 29522 | grep -v grep
10:19:45 SQL> select count(*) from v$process;
COUNT(*)
26
-->the lock was released
10:19:54 SQL> @lock_obj
no rows selected
10:20:03 SQL> @comm_sess_users;
+----------------------------------------------------+
| User Sessions (All) |
+----------------------------------------------------+
Instance SID Serial ID Status Oracle User O/S User O/S PID Session Program Terminal Machine
ora11g 125 5 INACTIVE SYS oracle 4734 [email protected] (TNS V1 pts/0 orasrv.com
139 9 ACTIVE SYS oracle 29447 [email protected] (TNS V1 pts/4 orasrv.com
4. the trace log file.
[25-JUN-2013 09:58:03:345] nsprecv: FF 01 00 00 00 04 00 00 |........|
[25-JUN-2013 09:58:03:345] nsprecv: 00 03 0E 13 |.... |
[25-JUN-2013 09:58:03:345] nsprecv: normal exit
[25-JUN-2013 09:58:03:345] nsrdr: got NSPTDA packet
[25-JUN-2013 09:58:03:345] nsrdr: NSPTDA flags: 0x0
[25-JUN-2013 09:58:03:345] nsrdr: normal exit
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: *what=1, *bl=8145
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: nsctxrnk=0
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: normal exit
[25-JUN-2013 09:58:03:345] nioqrc: exit
[25-JUN-2013 09:58:03:345] nioqsn: entry
[25-JUN-2013 09:58:03:345] nioqsn: exit
[25-JUN-2013 09:58:03:345] nioqrc: entry
[25-JUN-2013 09:58:03:345] nsdo: entry
[25-JUN-2013 09:58:03:345] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
[25-JUN-2013 09:58:03:345] nsdo: rank=64, nsctxrnk=0
[25-JUN-2013 09:58:03:345] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[25-JUN-2013 09:58:03:345] nsdo: gtn=168, gtc=168, ptn=10, ptc=8155
[25-JUN-2013 09:58:03:345] nsdofls: entry
[25-JUN-2013 09:58:03:345] nsdofls: DATA flags: 0x0
[25-JUN-2013 09:58:03:345] nsdofls: sending NSPTDA packet
[25-JUN-2013 09:58:03:345] nspsend: entry
[25-JUN-2013 09:58:03:345] nspsend: plen=17, type=6
[25-JUN-2013 09:58:03:345] nttwr: entry
[25-JUN-2013 09:58:03:345] nttwr: socket 13 had bytes written=17
[25-JUN-2013 09:58:03:345] nttwr: exit
[25-JUN-2013 09:58:03:345] nspsend: packet dump
[25-JUN-2013 09:58:03:345] nspsend: 00 11 00 00 06 00 00 00 |........|
[25-JUN-2013 09:58:03:345] nspsend: 00 00 09 05 00 00 00 11 |........|
[25-JUN-2013 09:58:03:345] nspsend: 00 |. |
[25-JUN-2013 09:58:03:345] nspsend: 17 bytes to transport
[25-JUN-2013 09:58:03:345] nspsend: normal exit
[25-JUN-2013 09:58:03:345] nsdofls: exit (0)
[25-JUN-2013 09:58:03:345] nsdo: nsctxrnk=0
[25-JUN-2013 09:58:03:345] nsdo: normal exit
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: entry
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x0
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: rank=64, nsctxrnk=0
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: nsctx: state=8, flg=0x400c, mvd=0
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: gtn=168, gtc=168, ptn=10, ptc=8155
[25-JUN-2013 09:58:03:345] nsfull_pkt_rcv: switching to application buffer
[25-JUN-2013 09:58:03:345] nsrdr: entry
[25-JUN-2013 09:58:03:345] nsrdr: recving a packet
[25-JUN-2013 09:58:03:345] nsprecv: entry
[25-JUN-2013 09:58:03:345] nsprecv: reading from transport...
[25-JUN-2013 09:58:03:345] nttrd: entry
[25-JUN-2013 09:58:03:345] nttrd: socket 13 had bytes read=13
[25-JUN-2013 09:58:03:345] nttrd: exit
[25-JUN-2013 09:58:03:345] nsprecv: 13 bytes from transport
[25-JUN-2013 09:58:03:345] nsprecv: tlen=13, plen=13, type=6
[25-JUN-2013 09:58:03:345] nsprecv: packet dump
[25-JUN-2013 09:58:03:345] nsprecv: 00 0D 00 00 06 00 00 00 |........|
[25-JUN-2013 09:58:03:345] nsprecv: 00 00 03 0E 14 |..... |
[25-JUN-2013 09:58:03:345] nsprecv: normal exit
[25-JUN-2013 09:58:03:345] nsrdr: got NSPTDA packet
[25-JUN-2013 09:58:03:346] nsrdr: NSPTDA flags: 0x0
[25-JUN-2013 09:58:03:346] nsrdr: normal exit
[25-JUN-2013 09:58:03:346] nsfull_pkt_rcv: *what=1, *bl=8145
[25-JUN-2013 09:58:03:346] nsfull_pkt_rcv: nsctxrnk=0
[25-JUN-2013 09:58:03:346] nsfull_pkt_rcv: normal exit
[25-JUN-2013 09:58:03:346] nioqrc: exit
[25-JUN-2013 09:58:03:346] nioqsn: entry
[25-JUN-2013 09:58:03:346] nioqsn: exit
[25-JUN-2013 09:58:03:346] nioqrc: entry
[25-JUN-2013 09:58:03:346] nsdo: entry
[25-JUN-2013 09:58:03:346] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
[25-JUN-2013 09:58:03:346] nsdo: rank=64, nsctxrnk=0
[25-JUN-2013 09:58:03:346] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[25-JUN-2013 09:58:03:346] nsdo: gtn=168, gtc=168, ptn=10, ptc=8155
[25-JUN-2013 09:58:03:346] nsdofls: entry
[25-JUN-2013 09:58:03:346] nsdofls: DATA flags: 0x0
[25-JUN-2013 09:58:03:346] nsdofls: sending NSPTDA packet
[25-JUN-2013 09:58:03:346] nspsend: entry
[25-JUN-2013 09:58:03:346] nspsend: plen=17, type=6
[25-JUN-2013 09:58:03:346] nttwr: entry
[25-JUN-2013 09:58:03:346] nttwr: socket 13 had bytes written=17
[25-JUN-2013 09:58:03:346] nttwr: exit
[25-JUN-2013 09:58:03:346] nspsend: packet dump
[25-JUN-2013 09:58:03:346] nspsend: 00 11 00 00 06 00 00 00 |........|
[25-JUN-2013 09:58:03:346] nspsend: 00 00 09 05 00 00 00 12 |........|
[25-JUN-2013 09:58:03:346] nspsend: 00 |. |
[25-JUN-2013 09:58:03:347] nspsend: 17 bytes to transport
[25-JUN-2013 09:58:03:347] nspsend: normal exit
[25-JUN-2013 09:58:03:347] nsdofls: exit (0)
[25-JUN-2013 09:58:03:347] nsdo: nsctxrnk=0
[25-JUN-2013 09:58:03:347] nsdo: normal exit
[25-JUN-2013 09:58:03:347] nsfull_pkt_rcv: entry
[25-JUN-2013 09:58:03:347] nsfull_pkt_rcv: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x0
[25-JUN-2013 09:58:03:347] nsfull_pkt_rcv: rank=64, nsctxrnk=0
[25-JUN-2013 09:58:03:347] nsfull_pkt_rcv: nsctx: state=8, flg=0x400c, mvd=0
[25-JUN-2013 09:58:03:347] nsfull_pkt_rcv: gtn=168, gtc=168, ptn=10, ptc=8155
[25-JUN-2013 09:58:03:347] nsfull_pkt_rcv: switching to application buffer
[25-JUN-2013 09:58:03:347] nsrdr: entry
[25-JUN-2013 09:58:03:347] nsrdr: recving a packet
[25-JUN-2013 09:58:03:347] nsprecv: entry
[25-JUN-2013 09:58:03:347] nsprecv: reading from transport...
[25-JUN-2013 09:58:03:347] nttrd: entry
[25-JUN-2013 09:59:13:389] nttrd: socket 13 had bytes read=220
[25-JUN-2013 09:59:13:390] nttrd: exit
[25-JUN-2013 09:59:13:390] nsprecv: 220 bytes from transport
[25-JUN-2013 09:59:13:390] nsprecv: tlen=220, plen=220, type=6
[25-JUN-2013 09:59:13:390] nsprecv: packet dump
[25-JUN-2013 09:59:13:390] nsprecv: 00 DC 00 00 06 00 00 00 |........|
[25-JUN-2013 09:59:13:390] nsprecv: 00 00 03 5E 15 21 80 00 |...^.!..|
[25-JUN-2013 09:59:13:390] nsprecv: 00 00 00 00 00 FE FF FF |........|
[25-JUN-2013 09:59:13:390] nsprecv: FF 7E 00 00 00 FE FF FF |.~......|
[25-JUN-2013 09:59:13:390] nsprecv: FF 0D 00 00 00 FE FF FF |........|
[25-JUN-2013 09:59:13:390] nsprecv: FF FE FF FF FF 00 00 00 |........|
[25-JUN-2013 09:59:13:390] nsprecv: 00 01 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:390] nsprecv: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:390] nsprecv: 00 00 00 00 00 FE FF FF |........|
[25-JUN-2013 09:59:13:390] nsprecv: FF 00 00 00 00 FE FF FF |........|
[25-JUN-2013 09:59:13:390] nsprecv: FF FE FF FF FF 48 10 C1 |.....H..|
[25-JUN-2013 09:59:13:390] nsprecv: 01 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:390] nsprecv: 00 FE FF FF FF FE FF FF |........|
[25-JUN-2013 09:59:13:390] nsprecv: FF 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 00 2A 75 70 |.....*up|
[25-JUN-2013 09:59:13:391] nsprecv: 64 61 74 65 20 65 6D 70 |date.emp|
[25-JUN-2013 09:59:13:391] nsprecv: 20 73 65 74 20 73 61 6C |.set.sal|
[25-JUN-2013 09:59:13:391] nsprecv: 3D 73 61 6C 2A 31 2E 31 |=sal*1.1|
[25-JUN-2013 09:59:13:391] nsprecv: 20 77 68 65 72 65 20 64 |.where.d|
[25-JUN-2013 09:59:13:391] nsprecv: 65 70 74 6E 6F 3D 32 30 |eptno=20|
[25-JUN-2013 09:59:13:391] nsprecv: 01 00 00 00 01 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 02 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:391] nsprecv: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:392] nsprecv: 00 00 00 00 |.... |
[25-JUN-2013 09:59:13:392] nsprecv: normal exit
[25-JUN-2013 09:59:13:392] nsrdr: got NSPTDA packet
[25-JUN-2013 09:59:13:392] nsrdr: NSPTDA flags: 0x0
[25-JUN-2013 09:59:13:392] nsrdr: normal exit
[25-JUN-2013 09:59:13:392] nsfull_pkt_rcv: *what=1, *bl=8145
[25-JUN-2013 09:59:13:392] nsfull_pkt_rcv: nsctxrnk=0
[25-JUN-2013 09:59:13:392] nsfull_pkt_rcv: normal exit
[25-JUN-2013 09:59:13:392] nioqrc: exit
[25-JUN-2013 09:59:13:393] nsmore2recv: entry
[25-JUN-2013 09:59:13:393] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:393] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:393] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:393] sntpoltsts: exit
[25-JUN-2013 09:59:13:393] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:393] nioqts: exit
[25-JUN-2013 09:59:13:393] nioqts: exit
[25-JUN-2013 09:59:13:394] nioqts: exit
[25-JUN-2013 09:59:13:395] nsmore2recv: entry
[25-JUN-2013 09:59:13:395] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:395] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:395] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:395] sntpoltsts: exit
[25-JUN-2013 09:59:13:395] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:395] nioqts: exit
[25-JUN-2013 09:59:13:396] nioqts: exit
[25-JUN-2013 09:59:13:397] nioqts: exit
[25-JUN-2013 09:59:13:397] nsmore2recv: entry
[25-JUN-2013 09:59:13:398] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:398] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:398] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:398] sntpoltsts: exit
[25-JUN-2013 09:59:13:398] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:398] nioqts: exit
[25-JUN-2013 09:59:13:398] nioqts: exit
[25-JUN-2013 09:59:13:400] nioqts: exit
[25-JUN-2013 09:59:13:400] nsmore2recv: entry
[25-JUN-2013 09:59:13:400] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:400] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:400] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:400] sntpoltsts: exit
[25-JUN-2013 09:59:13:400] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:400] nioqts: exit
[25-JUN-2013 09:59:13:401] nioqts: exit
[25-JUN-2013 09:59:13:402] nioqts: exit
[25-JUN-2013 09:59:13:402] nsmore2recv: entry
[25-JUN-2013 09:59:13:402] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:402] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:402] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:402] sntpoltsts: exit
[25-JUN-2013 09:59:13:402] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:402] nioqts: exit
[25-JUN-2013 09:59:13:403] nioqts: exit
[25-JUN-2013 09:59:13:404] nioqts: exit
[25-JUN-2013 09:59:13:405] nsmore2recv: entry
[25-JUN-2013 09:59:13:405] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:405] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:405] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:405] sntpoltsts: exit
[25-JUN-2013 09:59:13:405] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:405] nioqts: exit
[25-JUN-2013 09:59:13:406] nioqts: exit
[25-JUN-2013 09:59:13:406] nioqts: exit
[25-JUN-2013 09:59:13:407] nsmore2recv: entry
[25-JUN-2013 09:59:13:407] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:407] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:407] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:408] sntpoltsts: exit
[25-JUN-2013 09:59:13:408] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:408] nioqts: exit
[25-JUN-2013 09:59:13:409] nioqts: exit
[25-JUN-2013 09:59:13:410] nioqts: exit
[25-JUN-2013 09:59:13:410] nsmore2recv: entry
[25-JUN-2013 09:59:13:410] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:410] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:410] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:410] sntpoltsts: exit
[25-JUN-2013 09:59:13:410] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:410] nioqts: exit
[25-JUN-2013 09:59:13:411] nioqts: exit
[25-JUN-2013 09:59:13:412] nioqts: exit
[25-JUN-2013 09:59:13:412] nsmore2recv: entry
[25-JUN-2013 09:59:13:412] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:412] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:412] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:412] sntpoltsts: exit
[25-JUN-2013 09:59:13:412] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:412] nioqts: exit
[25-JUN-2013 09:59:13:412] nioqts: exit
[25-JUN-2013 09:59:13:413] nioqts: exit
[25-JUN-2013 09:59:13:425] nsmore2recv: entry
[25-JUN-2013 09:59:13:425] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:425] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:425] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:425] sntpoltsts: exit
[25-JUN-2013 09:59:13:425] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:425] nioqts: exit
[25-JUN-2013 09:59:13:426] nioqts: exit
[25-JUN-2013 09:59:13:427] nioqts: exit
[25-JUN-2013 09:59:13:427] nsmore2recv: entry
[25-JUN-2013 09:59:13:427] nsmore2recv: testing for MOREDATA from transport
[25-JUN-2013 09:59:13:427] sntpoltsts: fd 13 need 41 readiness event, wait time 0
[25-JUN-2013 09:59:13:427] sntpoltsts: fd 13 has 0 readiness ev
[25-JUN-2013 09:59:13:427] sntpoltsts: exit
[25-JUN-2013 09:59:13:427] nsmore2recv: exit (0)
[25-JUN-2013 09:59:13:427] nioqts: exit
[25-JUN-2013 09:59:13:428] nioqts: exit
[25-JUN-2013 09:59:13:428] nioqts: exit
[25-JUN-2013 09:59:13:428] nioqsn: entry
[25-JUN-2013 09:59:13:428] nioqsn: exit
[25-JUN-2013 09:59:13:428] nioqrc: entry
[25-JUN-2013 09:59:13:428] nsdo: entry
[25-JUN-2013 09:59:13:428] nsdo: cid=0, opcode=84, *bl=0, *what=1, uflgs=0x20, cflgs=0x3
[25-JUN-2013 09:59:13:428] nsdo: rank=64, nsctxrnk=0
[25-JUN-2013 09:59:13:429] nsdo: nsctx: state=8, flg=0x8400c, mvd=0
[25-JUN-2013 09:59:13:429] nsdo: gtn=168, gtc=168, ptn=10, ptc=8155
[25-JUN-2013 09:59:13:429] nsdofls: entry
[25-JUN-2013 09:59:13:429] nsdofls: DATA flags: 0x0
[25-JUN-2013 09:59:13:429] nsdofls: sending NSPTDA packet
[25-JUN-2013 09:59:13:429] nspsend: entry
[25-JUN-2013 09:59:13:429] nspsend: plen=125, type=6
[25-JUN-2013 09:59:13:429] nttwr: entry
[25-JUN-2013 09:59:13:429] nttwr: socket 13 had bytes written=125
[25-JUN-2013 09:59:13:429] nttwr: exit
[25-JUN-2013 09:59:13:429] nspsend: packet dump
[25-JUN-2013 09:59:13:429] nspsend: 00 7D 00 00 06 00 00 00 |.}......|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 08 06 00 AD B2 2D |.......-|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 00 00 00 02 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 01 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 00 00 00 04 02 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 13 00 05 00 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 00 00 00 00 02 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 07 00 06 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 57 24 01 00 04 00 00 8B |W$......|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 00 0C 00 00 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 15 00 00 01 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 0D 00 0D 01 00 01 24 |.......$|
[25-JUN-2013 09:59:13:429] nspsend: 57 00 04 00 00 00 8B 00 |W.......|
[25-JUN-2013 09:59:13:429] nspsend: 0C 00 00 00 00 00 00 00 |........|
[25-JUN-2013 09:59:13:429] nspsend: 00 00 00 00 00 |..... |
[25-JUN-2013 09:59:13:429] nspsend: 125 bytes to transport
[25-JUN-2013 09:59:13:429] nspsend: normal exit
[25-JUN-2013 09:59:13:429] nsdofls: exit (0)
[25-JUN-2013 09:59:13:429] nsdo: nsctxrnk=0
[25-JUN-2013 09:59:13:429] nsdo: normal exit
[25-JUN-2013 09:59:13:430] nsfull_pkt_rcv: entry
[25-JUN-2013 09:59:13:430] nsfull_pkt_rcv: cid=0, opcode=85, *bl=0, *what=0, uflgs=0x0, cflgs=0x0
[25-JUN-2013 09:59:13:430] nsfull_pkt_rcv: rank=64, nsctxrnk=0
[25-JUN-2013 09:59:13:430] nsfull_pkt_rcv: nsctx: state=8, flg=0x400c, mvd=0
[25-JUN-2013 09:59:13:430] nsfull_pkt_rcv: gtn=168, gtc=168, ptn=10, ptc=8155
[25-JUN-2013 09:59:13:430] nsfull_pkt_rcv: switching to application buffer
[25-JUN-2013 09:59:13:430] nsrdr: entry
[25-JUN-2013 09:59:13:430] nsrdr: recving a packet
[25-JUN-2013 09:59:13:430] nsprecv: entry
[25-JUN-2013 09:59:13:430] nsprecv: reading from transport...
[25-JUN-2013 09:59:13:430] nttrd: entry
[25-JUN-2013 10:18:26:172] ntt2err: entry
[25-JUN-2013 10:18:26:172] ntt2err: exit
[25-JUN-2013 10:18:26:172] nttrd: socket 13 had bytes read=0
[25-JUN-2013 10:18:26:172] nttrd: exit
[25-JUN-2013 10:18:26:172] nsprecv: error exit
[25-JUN-2013 10:18:26:172] nserror: entry
[25-JUN-2013 10:18:26:172] nserror: nsres: id=0, op=68, ns=12570, ns2=12560; nt[0]=513, nt[1]=113, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[25-JUN-2013 10:18:26:172] nsrdr: error exit
[25-JUN-2013 10:18:26:172] nsfull_pkt_rcv: nsctxrnk=0
[25-JUN-2013 10:18:26:172] nsfull_pkt_rcv: error exit
[25-JUN-2013 10:18:26:172] nioqrc: recv: packet reader error -> translated to IFCR_EOF
[25-JUN-2013 10:18:26:172] nioqer: entry
[25-JUN-2013 10:18:26:172] nioqer: incoming err = 12151
[25-JUN-2013 10:18:26:172] nioqce: entry
[25-JUN-2013 10:18:26:172] nioqce: exit
[25-JUN-2013 10:18:26:172] nioqer: returning err = 3113
[25-JUN-2013 10:18:26:172] nioqer: exit
[25-JUN-2013 10:18:26:172] nioqrc: exit
[25-JUN-2013 10:18:26:173] nioqds: entry
[25-JUN-2013 10:18:26:173] nioqds: disconnecting...
[25-JUN-2013 10:18:26:173] nsdo: entry
[25-JUN-2013 10:18:26:173] nsdo: cid=0, opcode=67, *bl=0, *what=1, uflgs=0x2, cflgs=0x3
[25-JUN-2013 10:18:26:173] nsdo: rank=64, nsctxrnk=0
[25-JUN-2013 10:18:26:173] nsdo: nsctx: state=1, flg=0x8400c, mvd=0
[25-JUN-2013 10:18:26:173] nsdo: nsctxrnk=0
[25-JUN-2013 10:18:26:173] nsdo: error exit
[25-JUN-2013 10:18:26:173] nsclose: entry
[25-JUN-2013 10:18:26:173] nsvntx_dei: entry
[25-JUN-2013 10:18:26:173] nsvntx_dei: exit
[25-JUN-2013 10:18:26:173] nstimarmed: entry
[25-JUN-2013 10:18:26:173] nstimarmed: timer is armed, with value 3833
[25-JUN-2013 10:18:26:173] nstimarmed: normal exit
[25-JUN-2013 10:18:26:173] nstimclear: entry
[25-JUN-2013 10:18:26:173] nstimclear: normal exit
[25-JUN-2013 10:18:26:173] nttctl: entry
[25-JUN-2013 10:18:26:173] nttctl: entry
[25-JUN-2013 10:18:26:173] nsfull_cls: entry
[25-JUN-2013 10:18:26:173] nsfull_cls: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x40
[25-JUN-2013 10:18:26:173] nsfull_cls: nsctx: state=1, flg=0x84008, mvd=0
[25-JUN-2013 10:18:26:173] nsbfr: entry
[25-JUN-2013 10:18:26:173] nsbaddfl: entry
[25-JUN-2013 10:18:26:173] nsbaddfl: normal exit
[25-JUN-2013 10:18:26:173] nsbfr: normal exit
[25-JUN-2013 10:18:26:173] nsbfr: entry
[25-JUN-2013 10:18:26:173] nsbaddfl: entry
[25-JUN-2013 10:18:26:173] nsbaddfl: normal exit
[25-JUN-2013 10:18:26:173] nsbfr: normal exit
[25-JUN-2013 10:18:26:173] nsfull_cls: normal exit
[25-JUN-2013 10:18:26:173] nsiocancel: entry
[25-JUN-2013 10:18:26:173] nsiofrrg: entry
[25-JUN-2013 10:18:26:173] nsiofrrg: cur = 113663fc
[25-JUN-2013 10:18:26:173] nsbfr: entry
[25-JUN-2013 10:18:26:174] nsbaddfl: entry
[25-JUN-2013 10:18:26:174] nsbaddfl: normal exit
[25-JUN-2013 10:18:26:174] nsbfr: normal exit
[25-JUN-2013 10:18:26:174] nsiofrrg: exit
[25-JUN-2013 10:18:26:174] nsiocancel: exit
[25-JUN-2013 10:18:26:174] nsclose: closing transport
[25-JUN-2013 10:18:26:174] nttdisc: entry
[25-JUN-2013 10:18:26:174] nttdisc: Closed socket 13
[25-JUN-2013 10:18:26:174] nttdisc: exit
[25-JUN-2013 10:18:26:174] nsclose: global context check-out (from slot 0) complete
[25-JUN-2013 10:18:26:174] nsnadisc: entry
[25-JUN-2013 10:18:26:174] nadisc: entry
[25-JUN-2013 10:18:26:174] nacomtm: entry
[25-JUN-2013 10:18:26:174] nacompd: entry
[25-JUN-2013 10:18:26:174] nacompd: exit
[25-JUN-2013 10:18:26:174] nacompd: entry
[25-JUN-2013 10:18:26:174] nacompd: exit
[25-JUN-2013 10:18:26:174] nacomtm: exit
[25-JUN-2013 10:18:26:174] nas_dis: entry
[25-JUN-2013 10:18:26:174] nas_dis: exit
[25-JUN-2013 10:18:26:174] nau_dis: entry
[25-JUN-2013 10:18:26:174] nau_dis: exit
[25-JUN-2013 10:18:26:174] naeetrm: entry
[25-JUN-2013 10:18:26:174] naeetrm: exit
[25-JUN-2013 10:18:26:174] naectrm: entry
[25-JUN-2013 10:18:26:174] naectrm: exit
[25-JUN-2013 10:18:26:174] nagbltrm: entry
[25-JUN-2013 10:18:26:174] nagbltrm: exit
[25-JUN-2013 10:18:26:174] nadisc: exit
[25-JUN-2013 10:18:26:174] nsnadisc: normal exit
[25-JUN-2013 10:18:26:174] nsvntx_dei: entry
[25-JUN-2013 10:18:26:174] nsvntx_dei: exit
[25-JUN-2013 10:18:26:174] nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=11365f08 nsntx=11363180
[25-JUN-2013 10:18:26:174] nsiocancel: entry
[25-JUN-2013 10:18:26:174] nsiofrrg: entry
[25-JUN-2013 10:18:26:174] nsiofrrg: exit
[25-JUN-2013 10:18:26:174] nsiocancel: exit
[25-JUN-2013 10:18:26:174] nsmfr: entry
[25-JUN-2013 10:18:26:174] nsmfr: 2020 bytes at 0x11363180
[25-JUN-2013 10:18:26:174] nsmfr: normal exit
[25-JUN-2013 10:18:26:174] nsmfr: entry
[25-JUN-2013 10:18:26:174] nsmfr: 1012 bytes at 0x11365f08
[25-JUN-2013 10:18:26:174] nsmfr: normal exit
[25-JUN-2013 10:18:26:174] nsclose: normal exit
[25-JUN-2013 10:18:26:174] nioqds: exit
[25-JUN-2013 10:18:26:174] nsbfree: entry
[25-JUN-2013 10:18:26:174] nsbgetfl: entry
[25-JUN-2013 10:18:26:175] nsbgetfl: normal exit
[25-JUN-2013 10:18:26:175] nsbaddfl: entry
[25-JUN-2013 10:18:26:175] nsbaddfl: normal exit
[25-JUN-2013 10:18:26:175] nsbfree: normal exit
[25-JUN-2013 10:18:26:175] nsbfree: entry
[25-JUN-2013 10:18:26:175] nsbgetfl: entry
[25-JUN-2013 10:18:26:175] nsbgetfl: normal exit
[25-JUN-2013 10:18:26:175] nsbaddfl: entry
[25-JUN-2013 10:18:26:175] nsbaddfl: normal exit
[25-JUN-2013 10:18:26:175] nsbfree: normal exit
[25-JUN-2013 10:18:26:175] nigtrm: Count in the NI global area is now 1
[25-JUN-2013 10:18:26:175] nstimdei: entry
[25-JUN-2013 10:18:26:175] nstimdg: entry
[25-JUN-2013 10:18:26:175] nstimdg: normal exit
[25-JUN-2013 10:18:26:175] nstimdei: normal exit
[25-JUN-2013 10:18:26:175] nsbfrfl: entry
[25-JUN-2013 10:18:26:175] nsbrfr: entry
[25-JUN-2013 10:18:26:175] nsbrfr: nsbfs at 0x11363e20, data at 0x11363ee8.
[25-JUN-2013 10:18:26:175] nsbrfr: normal exit
[25-JUN-2013 10:18:26:175] nsbrfr: entry
[25-JUN-2013 10:18:26:175] nsbrfr: nsbfs at 0x11363d68, data at 0x1136b708.
[25-JUN-2013 10:18:26:175] nsbrfr: normal exit
[25-JUN-2013 10:18:26:175] nsbrfr: entry
[25-JUN-2013 10:18:26:175] nsbrfr: nsbfs at 0x11363e90, data at 0x1136d728.
[25-JUN-2013 10:18:26:175] nsbrfr: normal exit
[25-JUN-2013 10:18:26:175] nsbrfr: entry
[25-JUN-2013 10:18:26:175] nsbrfr: nsbfs at 0x11362c10, data at 0x113696e8.
[25-JUN-2013 10:18:26:175] nsbrfr: normal exit
[25-JUN-2013 10:18:26:175] nsbrfr: entry
[25-JUN-2013 10:18:26:175] nsbrfr: nsbfs at 0x11363bb0, data at 0x1136f748.
[25-JUN-2013 10:18:26:175] nsbrfr: normal exit
[25-JUN-2013 10:18:26:175] nsbfrfl: normal exit
[25-JUN-2013 10:18:26:175] nigtrm: Count in the NL global area is now 3
[25-JUN-2013 10:18:26:181] nagbltrm: entry
[25-JUN-2013 10:18:26:181] nau_gtm: entry
[25-JUN-2013 10:18:26:181] nau_gtm: exit
[25-JUN-2013 10:18:26:181] nagbltrm: exit
[25-JUN-2013 10:18:26:181] nnfgdei: entry
5.question
a.The value of sqlnet.expire_time is only one minute. Why did the server take about 20 minutes to release the lock and server process?
b. Is there other factor to delay the lock and server process to releas such as tcp/ip kernel parameter?
Thanks in advance.
RobinsonHi Awais,
search the forum for "measure execution time" to find threads like this...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
XL - Reporter - To set current system date as the PARAMETER to run a report
Hi
Version : SAP 2007 B
Patch : 10
Using the XL - Reporter we had designed a stock report as per the client rquested format. In that Report , we use parameter function to get the start date and End date ( 2 PARAMETERS) for which the report should be generated.
Using the Report Organizer , JOB was created for the above report scheduling that the report should run daily night 9 Clock and save it in Local Computer.
Now comes the problem , how to provide the parameter ( Start and End Date - which is nothing but the server date or computer date)
Is there is any way to set the XL-Reporter Parameter - as current date or server date .
ThanksHi Balaji,
Check the following thread its solves your problem
Re: XL Reporter Date Function
*Close the thread if issue solved.
Regards
Jambulingam.P -
Greetings,
An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
Thanks in advance.What do you mean exactly with this question?
"Can you provide some more detail like BizTalk the receiver? "
The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
port) that can't process its messages. Or rather by one receiving software that can't process its messages. -
Start-Process ignores the parameter "-wait" with explorer.exe
Hi all,
maybe it´s a stupid question, but...
Start-Process notepad.exe -Wait
...will wait for closing the process "notepad.exe".
Start-Process explorer.exe -Wait
...will not wait for closing it, instead the script will go on.
My question: Why? :) is it because "explorer.exe" is a core element of Windows and there are more then one process? For whaty exactly is the parameter "-wait" waiting for? Finishing the process name, the Process ID?
is it a bug?
Otherwise, do you have a good idea for that scenario:
a script will be started and opens a dedicated network share. Within this share the user (ServiceDesk Employee) can paste a CSV file, and after closing the Explorer, the script will read in this CSV and import that informations.
Thank you guys!I think the issue is due to explorer.exe is always running, if you stop that process, then you will lose your entire desktop. By opening File Explorer, a new explorer.exe process does not start up. You can verify this by opening task manager, and under the
process tab, look at your process count, and then open a few File Explorer windows, this count does not change.
Your script may need to be a two step process, where the Help Desk user manually copies the CSV file, then runs the script, or you can do a Read-Host, where they put in the path to the CSV file, and then your script can copy it to where it needs to go, and
then continue its execution.
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet
Maybe you are looking for
-
have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? H
-
I have a Lenovo 3000 N200 with a VGA output (no SVideo) I want to send video to my Panasonic HDTV. I have a VGA to RCA/Svideo adapter. A signal goes to the TV but it is all static. Is it not possible to connect them or am I missing some software?
-
How to pass multi-value input parameter to SQL command
I'm having trouble following the threads related to passing multi-value parameters to a SQL command. I need more details on the work-around that exists for using a dummy main report to GET the input parameters and pass them to a subreport parameter t
-
How to import songs from my iPod nano into my iTunes library
I don't know how
-
Possibility to attach documents in TEM?
Hi all, I've accidentally posted this as a blog post already, but I guess it more belongs into the discussion section: We have an old Training and Event Management solution in use and I received the question whether it is possible to link a scanned f