Issues printing

I am using a Mac with OSX 10.4.11 with Office 2004. For some reason whenever I try and print 1/2 in a Word document, or even sometimes do random pages get corrupted when printing in Mac OSX. For example I'll print the document below, and the first page will print out very large and in a weird strange character, but the second page will print out just fine.
I tried copy and pasting the first page to text Edit and AppleWorks and still the same problem, so I am forced to open Word 98 in Classic mode and print from there, and the file prints fine.
Any tips?
Thanks..
John
The file.
1st page will print in strange characters on the printer and tghe second page will work fine. This happens even after I copy and paste the file into TextEdit or AppleWorks. The only solution is to print in Classic Mode.
John Wolf Font: Book Antiqua 12
Doctrine of The Church
I. Doctrine of the Church (Ecclesiology)
A. Nature of the Church
1. Christ is the head of the Church (Eph 1:22-23)
2. The church was built upon the foundation of the apostles (Eph 2:19-22)
3. There is no distinction between Jews and Gentiles (Eph 3:4-10)
4. The church is one body (1 Cor 12, Rom 12)
5. The church is distinct from Israel
B. Church Government
There are numerous forms of church government and they are as follows
1. Episcopalian
2. Presbyterian
3. Congregationalist
A. Single Elder
B. Plural Local elders
C. Corporate Board
D. Pure Democracy
4. No Government but the Holy Spirit
C. Baptism & The Lord’s Supper
1. Baptism signifies a union with Christ but in practice denotes the action of washing or plunging in water. There are multiple interpretations as what Baptism means.
A. Baptism is a means of saving Grace
B. Baptism is a Sign and Seal of the Covenant
C. Baptism is a Token of Salvation
2. The Lord’s Supper
A. Established by Christ
B. Needs to be repeated in all Christian circles
C. A form of proclamation
D. Spiritual benefit to the partaker
E. Restricted only to true followers of Jesus Christ
F. Often practiced in the form of communion
D. Spiritual Gifts
1. The Purpose of Spiritual Gifts in the NT (1 Cor 1:7)
A. The gifts were meant for the Christian to perform his or her service in the church.
B. Instructions on Spiritual gifts are mentioned in Rom 12:6-8, 1 Cor 12:4-11, 28-30, and Eph 4:7-12.
2. The types of Spiritual gifts are working in miracles, healing, helpers, administration, and faith.
Doctrinal Statement
I believe that Christ has full ownership of the Church as here on earth according to Eph 1:22-23. I believe that the church was built upon the foundation the apostles set (Eph 2:19-22). I believe that the church is one body (Rom 12, 1 Cor 12) and that each member has a different function in the church. I also believe that the church and Israel are distinct. I do not believe in a spiritual Israel. I believe in a number of differing interpretations and practices on the government of the church. I personally believe that the congregational form of government is the most Biblical of all. But this is not to say that the other philosophies are completely unbiblical. I also believe that the follower of Christ needs be baptized which indicates that he is born again and has been washed from his sins. I do not believe that Baptism saves the Christian.
➢ I reject Baptismal Regeneration as taught by OneNess Pentecostals, Catholics and other groups.
➢ I rejected the Reformed view of Baptism being a Sign and Seal of the Covenant
➢ I believe that Baptism is by immersion only. I do not believe in sprinkling nor any other form for Baptism other than by immersion.
The Lord’s Supper was established by Christ and told in all three synoptic gospels and also in 1 Cor 11. I believe that the Lord’s Supper needs to be practiced by anyone professing to be a Christian as this is a form of a proclamation to the Lord and his death and resurrection. I believe the best way to practice the Lord’s supper would be in communion as mentioned in 1 Cor 10. I believe that the Lord’s Supper should be remembered once a month in the local church.
Spiritual Gifts are given to all believers. I believe that the spiritual gifts were meant for the believer to perform his or her services to the church and to the body of Christ. There are four passages in the NT that speak of the spiritual gifts and they are Rom 12:6-8, 1 Cor 12:4-11, 28-30, and Eph 4:7-12.
➢ I am a cessationist and believe that the apostolic sign gifts have ceased and are no longer in practice. Speaking in Tongues, Interpretation of Tongues, the working of miracles, the gift of healing, Apostleship, and Prophecy I believe are the most obvious of the sign gifts that ceased.
➢ I reject much of the Charismatic movement and believe that many so called “miracle workers” in that movement are frauds, and do not have the spiritual gift of healing that ceased in the 1st century with the closing of the Canon.
Separation I believe needs to be practiced by Christians serious about the Bible. There are three types of separation and they are from the world, from false teachers and from disobedient Christians. 1 John 2:15-17 teaches separation from the world, Gal 1:8-9 teaches separation from false teachers, and 2 Thes 3:14-15 teaches separation from disobedient Christians. Many New Evangelicals, Charismatics and such I believe are in disobedience to the scriptures so I therefore believe that separating from them in some areas is acting in accordance with the scriptures.
Bibliography: Erickson, Chapters 50-55, Grudem, Systematic Theology, Chapters 44-53, Berkhof, Systematic Theology, 579-92, Elwell, EDT 129-130, 135, 1135-1138, NDT (Baptism), Boice, Foundations of the Christian Faith, 650-56, Dabney, Discussions: Evangelical and Theological “The Public Preaching of Women,”96-118

I had a similar issue. Are the fonts on the pages the same or do they differ?
My issue was a font, check that.

Similar Messages

  • Issue printing PDF Packages

    I'm having issues printing PDF Packages.Clients have contacted us stating that our PDF Packages don't print properly. Essentially they were only able to print the "coversheet" and nothing else. I ran some test scenarios and noted that PDF Packages print feature behaved differently depending on several criterias:
    how it was viewed (ie: desktop, Firefox browser, IE browser)
    what Adobe Reader Plugin
    what command was used to access print feature (ie: file>print, ctrl + P, print icon)
    So far I've noticed that Adobe Reader utilizes two versions of the Print Dialog Box. The first one shows four choices for "Print Range" (All, Current View, Current Page, Pages...) seems to always be misconfigured and does not print as intended. The second one I've noticed seems to limit your Print Range choices (All, Current View) which usually works.
    This seems to be an Adobe bug. This Print Bug exists on both Acrobat 8 and 9, and the bug may or may not exist depending on how you view the "PDF Package" (ie: Desktop, Firefox, IE).
    If you open the PDF Package on your desktop and view via Adobe Reader for the most part it prints as expected for "Print Current Documents" or "Print All Documents". Although the "Print Range" is misaligned (ie: "Print All" behaves as "Current View", "Current View" behaves as "Current Page".
    If you open the PDF Package on a browser with an Adobe Reader plugin, a different scenario occurs.
    You might experience that you're locked into printing only the "coversheet" of the PDF Package.
    And again your "Print Range" might be misaligned.
    In Adobe Reader 8, a dropdown appeared when you selected "File>Print" or the "Print Icon". The dropdown then gave you an option to "Print Current Documents" or "Print All Documents". Which basically provided you an option to print the entire "PDF Package" or choose to print only a section of the "PDF Package".
    In Adobe Reader 9, the option to choose between "Print Current Documents" or "Print All Documents" was removed.
    In fact I started to document the instances to see if its an isolated issue and it looks like it fails to print (as intended) 60% of the time. Of the 40% that does print as intended... it looks like half the time the "Print Range" is misconfigured.
    Also, I've noticed that Reader utilizes two different "Print Dialog" boxes.
    The testing scenario I set up was that you can print in three different ways:
        1. File>Print
        2. <ctrl + P>
        3. <print icon>
    Three ways to view the PDF package:
        1. Download PDF Package & view on your desktop via Adobe Reader
        2. View PDF Package on Firefox w/ Adobe Reader plugin
        3. View PDF Package on Internet Explored  w/ Adobe Reader plugin
    My computer is using:
    XP Pro SP3,  Acrobat Reader 9
    I've also spot tested on:
    XP Pro SP3, Acrobat Reader 8
    Vista, Acrobat Reader 8
    Any Ideas?

    Hi Greg,
    Since this is sytem defined settings that you are trying to implement, I presume that the INI changes ought to be done in FSISYS.INI rather than the FSIUSER.INI.
    Apart from that most of your INI changes look fine as we are also using pdf as our Output type. Please find the INI change swe have implemented in our system for printing pdf.
    Device = ..\Print\Prt.pdf
    Bookmark = Yes,Page
    Compression = 0
    DownLoadFonts = Yes,Enabled
    LanguageLevel = Level2
    Module = PDFW32
    PageNumbers = Yes
    PrintFunc = PDFPrint
    PrintType = PDF
    SendOverlays = No,Enabled
    SendColor = Yes,Enabled
    PrintViewOnly = No
    SplitText = No
    SplitPercent = 50
    TextCommentOn = FORMSET
    Papersize = 0
    FontCompression = 1
    Hope this is helpful.
    Thanks,
    Akhil

  • Issue Printing One or Two Checks on HP LaserJet Pro 200 MFP M276nw

    I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
    I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
    With my old printer, I used the manual feed for a partial sheet.
    Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
    It seems one of two things happen:
    1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
    It then re-prints the partial page on the next sheet of paper.
    2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
    In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
    Any suggestions on how to avoid these issues would be appreciated.

    Me too.
    I've been using an alternate printer for printing the checks, but I'd rather get rid of the old one. (The HP Laser Pro 200 takes up a lot of space!)
    KC, Seems like you've been waiting for an answer for a VERY long time.  I'm not going to hold my breath.
    Hey HP!  Do you ever monitor this site?!
    KC-Texas wrote:
    I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
    I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
    With my old printer, I used the manual feed for a partial sheet.
    Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
    It seems one of two things happen:
    1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
    It then re-prints the partial page on the next sheet of paper.
    2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
    In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
    Any suggestions on how to avoid these issues would be appreciated.

  • Failed to issue print from win7 laptop to Canon MP230 which is connected to mac mini os x 10.8.3

    HI
    I have recently bought a Canon MP230 printer and connected to my Mac Mini 10.8.3 usb port.
    To setup the printer I downloaded the latest driver from canon web site and install all of them
    When I issue print from my mac mini it works fine.
    Next step was to issue print from Windows 7 laptop .
    To do that I intalled Bonjoure in my Windows 7 latpot and set the printer connected to MAc Mini as default printer.
    Upto this point every thing works fine.
    When I tried to issue print from my Windows 7 laptop the printer gets activated the power button start blinking . But it just pass a page from
    input tray to out tary without printing  a single line. I have looked into cups server page at my mac mini. It shows that the job fired from windows
    laptop was done.
    I treid a lot debug it myself . But no luck yet.
    Please help me. I am very upset.
    Thanks
    Anirban

    I just updated to 10.8.3 today, and my computer and Apple TV won't even recognize each other now.  I have absolutely no advice, but wanted to throw this in so you (and Apple) know you're not the only one. 

  • Goods Issue print for Pull list

    All,
    WHile doing Goods Issue by 201 mvt type one print format is coming .
    So we are designing a format for that .
    This print is coming thru output type WA03 .
    Also while doing pull list (MF60) , one print document is coming .
    Business wants a different format for that .
    And for both transactions ,output type is WA03 .
    How to tackle this situation ?
    regards

    Hello Sandeep,
    I think this query is already addressed. Follow the steps in this post, if you still have problem write to this forum.
    Goods Issue Print
    Hope this helps.
    Regards
    Arif Mansuri

  • Leopard upgrade issue printing to Xerox Docucolor 5000

    We recently upgraded to Leopard and have come up with an issue printing to our Docucolor 5000. When printing multiple copies of a page set up for landscape from AI CS3 or CS4 the first page prints okay. On subsequent pages the paper has flipped to protrait, although the are remains in landscape. Any thoughts on how to overcome this?
    Has happened to all of our Macs (all identical) with the upgrade. No other changes to our hardware or software.
    Docucolor 5000
    Fiery EXP50
    Driver: Fiery Docucolor 5000 v2.0

    Hello Terry. We had the same problems with our Canon printers that use the Fiery print controller. After blaming Adobe for the problem EFI, the makers of the Fiery, released a patch and updated driver that resolved this orientation problem. So I suggest you contact your Xerox support to see if they have these same fixes for your model of Fiery. Or you could check the EFI web site for any updates.
    PaHu

  • Update was terminated when trying to issue print output using VL02N tcode

    Hi friends,
    I am getting follwing error when trying to issue print output using VL02N tcode:
    Error: Update was terminated.
    When seen in SM13 i saw following info for function module RV_MESSAGE_UPDATE,which was showing error:
    Error Info: MC 601: Object requested is currently locked by user RAMU.
    When seen in SM12,i don't find any lock by above user RAMU(which is my user id itself).
    I request please give me some inputs on how to avoid this error.
    Thanks & Regards
    Seshagiri

    Hi Nam,
    This probelm is becuase you are trying to enter a record for which primary key already exists in the table.
    The insertion you are doing with a set of values which already exist and sap is getting this error that the "Duplicate record during insertion". try to check your insertion values and through se16 check if they already exist in the table mkpf.
    To rectify the data or else change the table and add one more unique to the primary key.
    Abhishek Purwar
    http://abhishek.purwar.googlepages.com

  • Peachtree Classic 12 Issues printing from PDQ

    This is a long-shot but I am looking to see if anyone has any knowledge of Peachtree Classic 12. We have a user that does accounting through Peachtree Classic 12 which resides on a Windows 2000 VM running on VMWare Workstation 11. Every so often she has issues printing from the PDQ module it where it will either not print at all or print in a way that data doesn't fit on the page and gets cut off. Usually we can get it to print again by messing with port settings, power cycling the printer, etc. but what I am stuck on right now is getting it to fit all the data on one page. There is something in the PDQ Printer setup about compression codes and setup codes but I am not sure where to find the correct codes that will compress the data output so that it fits on one page. Any help would be appreciated.
    This topic first appeared in the Spiceworks Community

    I had a similar issue. Are the fonts on the pages the same or do they differ?
    My issue was a font, check that.

  • Payment Advice Issue- Print and fax at the same time

    Hi,
    Currently payment advices are being sent to business partners (vendors) thorugh fax/email.   This is because process module Z_SAMPLE_PROCESS_00002040 is active in the system.  
    What I want to do is to be able to also print the payment advices even if vendor has communication data in the master data.  Program RFFoEDI1 is used with a custom form.   IDOCS are sent correctly to bank and remittance advices are faxed to vendor successfully.   With business wanting hard copies of remittance advices, when I try to reprint after first payment run is done and faxes sent running RFFOEDI1 and the payment document number, system says no records selected.   I searched in OSS and all the notes related to this issue are already in our system. 
    I have tried hard to solve this but no luck even I have done this before with other print programs but no RFFOEDI1.  One option is to remove the fax/email addresses from vendor which allows me to print but client does not want to remove fax numbers from vendor master. 
    Any suggestions will be appreciated.
    Dam

    Look into BTE 2050, through which you could possibly e-mail an additional copy to a generic company e-mail as back up electronic filing of RA. And then you can print it if need to print them on Adhoc basis
    Ron

  • Windows 8.1 printing issues printer HP Deskjet 2540

    Hi everybody
    I have Windows 8.1, x64  and everytime I try to print using my HP Deskjet 2540 I get a messaje:'Printer Offline" I have unistalled and re-installed several times. It did not help. Please help. Thank you

    Hello there! Welcome to the forums @MBG1993 
    I read about the issue you're having with your Deskjet 2540 showing it's "offline", on your Windows 8.1 system.
    I would like to suggest this guide to use for troubleshooting: 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8
    Let me know the details from troubleshooting the steps!
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Goods issue print out

    Hi
    I have completed stock transport order purchase order.then i do in t.code mb11 351 movement type goods issue.i want to take print out on that 351 goods issue,i try to give output type in mb02 t.code that time showing error,plz help
    Output WA02 for medium 1, partner function  is not defined
    Message no. VN025
    Diagnosis
    You have selected a combination of output and partner function which has not been defined.
    Procedure
    Make sure your entries are correct.
    This is a warning message. You can proceed by pressing ENTER.
    To prevent the warning message from appearing again, assign the required partner function to your output type in table TNAPN
    Regards
    Sam

    Hi there
    Check the below settings whether you have done it clear,,
    NACE-Select ME Click on Condition records- Select WA02( As you want)-Trans/Event Type-"WA" Print Version " 2" and Execute it
    In the next scren P-1, medium-1, Date/Time-Select 39as you want), Language EN and enter,, Now select the line and click on the communication and there enter the output device if anything specified for you,, and save it,,
    Now check in MB02, enter the material document, and double click on the any line item, Click on the messages do the same process for this document as above and save it and try MB90,, surely it wil work and for the future docs,,
    Thanks
    Senthil

  • Adobe X Issue Printing to 11x17

    I just updated my Adobe this morning to Adobe X, and have encountered some issues with the Print function. I have to print a lot of ANSI C, D, and E sized documents to ANSI B (or 11x17) as a part of my job. When I went to do so this morning, my "Preview: Composite" showed a letter sized document in the window. Attempting to click on the "Properties" button resulted in nothing, as with attempting to click on the "Page Setup" button. All other buttons (ie. "Printing Tips", "Advanced", and "Summerize Comments") seem to work. In order to override this, I changed all preferences on my default printer (HP LaserJet 5100) to 11x17. The Preview still showed a letter sized document. As a last ditch effort, I tried to just right click -> "Print" from My Documents, but this produced "Adobe Reader has encountered a problem and needs to close. We are sorry for the inconvenience" dialogue box. Further, I have the same problem with all the HP printers at work - HP-4600, HP-5500, HP-CP3505; but the Oce TDS450 (which doesn't print anything smaller than ANSI C) seems to work fine. I would rather stay with Adobe X than go through the process of reinstalling Adobe 9.4, but it is rather inconvenient to ask my coworker to print any pdf's I require to 11x17. Has anyone had the same issue and managed to solve it?

    FYI: To anyone following this... I ended up trying to reinstall Adobe Reader X, and I still had the same issue that when I try to print, none of the network HP printers are recognized. I didn't have any luck resolving this issue, so I went back to Adobe Reader 9.4 and I am able to print again. Seems glitchy, if you ask me.

  • Reader 11.0.03 issue printing PDF in colour

    Trying to print a document (PDF) in colour with Reader 11.0.03 but only getting blank pages.
    Reader 11.0.03 can print the PDF in Black and white.
    The PDF has be tested on different machines all with the same issue.
    I can print the document using 10.1.4.
    The work around (print as image) does work with Reader 11.0.03 but the quality is not the same plus i dont want my customers to keep doing this and playing around with the dpi.
    So far this is the 1st PDF and only one to have this issue but i would like to get ahead of this before it becomes a major issue.
    The PDF was created with CS6.

    Hey McBlob,
    Thank for your reply.
    Yes this way also works much like print as image.
    But I guess what I am trying to find out is there a way so the user will not have to do this work around?
    Is this a known issue related with Adobe Reader or is this a once off issue?
    Is there something needs to be done during the creation of the PDF?

  • F110 issue - print problem

    Hello All,
    We have an issue with transaction F110,   a user is trying to create a payment proposal and a payment run is being carried out.
    But when he tries to print this, he is not able to do so.Wheras another user can do so.
    I have applied trace on the user and checked, but its showing no missign objects as there was no error to the user .  I have compared both the users and they are from different modules hence its quite difficult to understand which object is causing the issue.
    Please could you let me know what could be the issue.
    Thanks
    Nanda

    Hi,
    You could also check the following -
    - the correct print variant has been created and used in F110 for the specific posting run.
    - also is the print job is being scheduled, the user has enough access for background job scheduling.
    Regards,
    Sanju

  • Having an issue printing in Adobe Reader XI

    I am trying to print a PDF that was created with Bluebeam in Adobe Reader XI.  When it prints the first page is fine but all following sheets are shift down and to the left.  This is the first time I have had this issue with a print created with Bluebeam.  Also the PDF prints fine out of Bluebeams reader.  What might be causing this?

    Thanks for the option.  It did work setting the print as image on.  Does this mean there is something wrong with how the PDF was created or that Adobe Reader is just having a problem reading it?
    Jason Kuhns
    Sr. Design Technician
    Description: Description: Description: cid:[email protected]
    Knowledge/ Creativity/ Innovation
    www.kci.com<http://www.kci.com/>
    1431 Greenway Drive, Suite 775
    Irving, TX  75038
    Office:  972-957-3016
    Cell:  571-308-5364

  • Issue printing combined document with comment summary.

    I am having an issue generating the correct output for printing a comment summary with connector lines.  I started off with three duplicate documents, all of which had been commented on by different individuals.  The documents and comments were combined and I attempted to print the comment summary with connector lines.  I noticed that at the bottom of the first page, where there should have been a comment, there was only the name of the person who had commented and then the standard line "Comments continued on next page" but the person's comment was not there on page 2.  Its as if only their response is being cut off but you can still see their name, along with the date and time of the comment.
    I sent the issue over to someone I know who has Adobe Acrobat Pro X and they did not have the same issue.  I am not able to upgrade to V.X yet so if there's anyway to correct this or if I am doing something wrong, could someone please respond and let me know?  I combine documents and print with comment summaries on a regular basis.
    Thank you

    Hi Alejandro,
    thanks a lot for your reply, but I am afraid this does not have anything to do with that.
    I have checked the option that you mention and it was checked. Besides, I am using now Web Intelligence Rich Client, so that option should not be a problem.
    I don't really know what it is, it seems to be a bug or maybe the alert are not supposed to be printed.
    I would appreciate any idea that could help.
    Thanks a lot

Maybe you are looking for