Issues with my USB HDD and can't uninstall the USB driver

Hi I have an external HDD USB 3.0 that when I plug in, windows detects it, but doesn't show in Computer
when I try to see it in device manager it shows as detected, but when I try to uninstall it the process just hangs there doing nothing
tried viewing the HDD with Disk Management, but that hangs and doesn't show a thing, just keeps saying contacting virtual disk service
I'm using Windows 7 ultimate service pack 1 64 bit with the latest updates
this started when I had to use a driver uninstaller for AMD and the HDD was connected, and I had to reinstall my USB driver while the HDD was connected through the whole process
my motherboard is a Z77X-D3H from Gigabyte if that helps

My guess is you corrupted the data on the HDD. Windows has no capability to compensate for this type of problem. This is not a "hardware compatibility" problem. You already know the HDD worked until your incident with the driver.
Why would you be using an uninstaller for AMD on an Intel based MB? That just does not sound right. There are no AMD drivers on the Gigabyte website for your MB.
I suggest you find a computer repair shop and have them look at your situation.
Your problem is not really in the scope of this forum and it is not Windows fault your HDD is now messed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My modem is down and can I get the jump-drive to install OS X Lion?

I was informed by my ISP (Hughes.net) that my modem is not functioning to download large files. They are sending a new modem; in the meantime I paid for the Lion upgrade and cannot install it. Can I get the jump-drive sent to me?

The flash drive version would be a new purchase ($69).

FSCK and reboot issues with external USB drive

I'm having an issue with an external USB hard drive I'm using. I've always had issues with this drive cause my reboot to "freeze" when it's mounted. Basically the system message with be sent out, but it doesn't actually proceed with the reboot. No switch to init 6 or anything, but the shutdown process is still active. I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand. So I just got around this by unmounting the drive before I shutdown. However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser.
Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing. I tried running fsck on the drive, but didn't get much farther. I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't. Even with a kill -9.
I'm really confused as to what is going on. Has anyone else had this problem? Anyone have any ideas what could be causing all this or what I can do to stop this? Thanks in advance!
David
[email protected]

Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

Error 42408 with iTunes 10.3 and can't Uninstall?

I can't buy music, play purchased downloads or authorise my computer. I have tried all of the methods posted here, such ejecting and reconnecting iPod, replacing the shortcut, rebooting my laptop, closing and reopening itunes, logging in and out again of my itunes account, removing SC info folder and the .plist files/version without extension and I am at my wits end with this.
The only thing I haven't tried is reinstalling because I can't uninstall iTunes and the change/repair options in add/remove hardware don't work either. I left it for hours trying to uninstall and it stuck on "preparing to remove."
I have Windows Vista 32 bit and am in the administrators account, if that is any help.

pfhannan:
Thought i had too much stuff in it,
On the contrary, the stuff that is on it gives the history of the issues with which you are dealing, and makes it easy for responders to make suggestions. Be sure you provide information requested by responders, so that their suggestions will be pertinent. I will take a look at the thread again and see if I have any suggestions to offer.
Good luck.
cornelius
PS: Thank you for leaving feedback in Apple Discussions by marking the solved post.

Please help me .. !!!!! 4 months ago I got my iphone 6 and can not access the iCloud Drive out charging me and never ending, I keep the chat whatsapp but I have come to give you the ok

4 month ago, i shop mi iPhone 6 bit i cant enter in to the icloud drive WHY..!!!!! solo sale charging. please help me

You might want to post in your native language as your question does not make sense.

Scaling issues with Windows 8.1 and 3200x1800 displays?

What about scaling issues with CS6 Illustrator and Photoshop? I have a hidpi 3200x1800 13" laptop with win 8.1 and can't use the software because of the tiny text.
Thanks,
PK
Sent from my iPhone

CS6 was released before HiDpi displays were common and there are no adjustments in that program.
You can try going into Preferences > Interface and changing the UI Font Size to Large.
You could also try lowering your display resolution until is decently readable.
Another step is joining Creative Cloud. Photoshop CC 2014 has 200% UI Scaling.
$50/month for all apps or $10/month for Photoshop/Lightroom.
There are intro and educational offers if you can get on them.
Gene

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I bought a few songs on itunes but the songs appear in grey letters and I cannot transfer them to my iphone. I've bought/rented TV shows/movies since so there isn't an issue with my account. How can I get these newly purchased songs onto my iphone?

I bought a few songs on itunes but the songs appear in grey letters and I cannot transfer them to my iphone. I've bought/rented TV shows/movies since so there isn't an issue with my account. How can I get these newly purchased songs onto my iphone?

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone. Both my wife and I have the same phones and are both having the same issue. We can only hear every other word.

Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone? Both my wife and I have the same phones and are both having the same issue. We can only hear every other word of the person we are talking to. This happens at home, on the road and in the downtown area while calling both cellphones and landlines. It is intermittent, so we don't know exactly when it will reoccur. Absolutely no problem with data. The data speed is great.

"Wireless devices use radio transmissions, so unfortunately you can't get Service if your device isn't in range of a transmission signal. And please be aware that even within your Coverage Area, many things can affect the availability and quality of your Service, including network capacity, your device, terrain, buildings, foliage and weather."
Customer Agreement | Verizon Wireless
While there may be an issue in your area, it is suggested that you don't use wireless service if it's a life or death situation, such as the one you've described.

Issues with Facebook; Chat window problems; can't minimize window , and send chat as message when one receiver logs off.

While using Firefox I have an 2 issues with Facebook chat. 1. Cannot minimize (-) the chat window, only close it (x). When the receiver in chat logs off and a message didn't go through- the option to "send message as email" doesn't work. These have been ongoing problems for several months. I don't have these issues when I use Safari.
== URL of affected sites ==
http://www.facebook.com

i have the same problem but on chrome and dat 2 after i installed facemood application

Freezing issues with MSI 970A-G43 and AMD FX 8320

Hey all,
I bought my brother a new system a few days ago, but he has had serious issues with the machine crashing ever since.
The machine has had a fresh installation of Windows 7, it has all the latest drivers for both motherboard, sound, chipset and video card (Latest VGA driver tested as well as the latest Beta version)
I thought the problem might be with the VGA card, as the computer would just shut off during 3d Gaming, but it also seems to happen when surfing the internet or doing normal "2d" activities
What happens is the computer will just seemingly shut off, the LED lights on the front of the case, around the dials, start blinking and the only way to get it back up again, is to turn if off at the power supply unit and then turn it back on again.
I'll paste in what my brother sent me (As I live in the UK and can't see the machine crashing myself), he said:
I dunno what the issue is but, last night the comp just shut off in middle of game play on 3 different games, and the lights were flashing, I had to turn complete power off to the power box and back on to restart comp, I kept checking all my temps with speccy and speed fan and nothing seemed high at all, also when it shuts off and I re start it, a lot of my desktop icons move around to different spots,
Update: crashed a few times on me, once playing euro, once just browsing Internet 5 min after the first one, changed out ram just for shots and giggles and ran euro on ultra for about 5 min and crashed. I dl a gpu monitor gadget, was accurate on temp but said the gpu was 0% but with just Internet would randomly jump to 99% or 40% then back to 0 and would stay and eventually crash
Spec is:
AMD FX-8320 3.5GHZ EIGHT CORE
500GB SATA III 6GB/S 7200RPM 16MB
COOLERMASTER SEIDON 120M WATER COOLER
4Gb DDR3 / 1600 MHZ MEMORY
MSI 970A-G43 AMD 970 CROSSFIRE AM3+ DDR3 USB 3.0 SATA
CORSAIR 500 WATTS CX500 V2 80 PLUS POWER SUPPLY
ASUS XONAR DG 5.1 CHANNELS PCI XONAR DG SOUND CARD
AMD RADEON 7750 2GB PCI-E
There was a concern I did have when I did search earlier, via a thread on Tomshardware in which a similiar board had issues with the FX8350's wattage going above the stated 125 watts and causing the board to freeze.
It's a different board/chip, but I wonder if the wattage of the CPU goes above 125W and causes problems on the board? Hmm
I feel really guilty right now, because I bought this for him as a present, it was $700ish plus shipping etc and it's been nothing but problems ever since.
I'm going to see what version of Bios he's running when he gets out of bed, but the Live Update software said there were no updates, but I'll have him check manually.
Another issue I noted, was I sent him some ram before the PC arrived, which was:
XMS3 — 8GB Dual Channel DDR3 Memory Kit (CMX8GX3M2A1333C9)
He originally put that ram in with the existing 4gb of ram, so I thought it "Might" be a conflict, due to them having a different Mhz value
So I had him remove the 4gb stick that came with the PC
As soon as he entered the bios, it froze and did so twice
So he removed that ram and put back the original 4gb stick and the bios worked
No idea if the two are related.

I hope this doesn't count as necro-ing a thread (last post was in October), but it's the one closest to my situation.
I have the following setup:
MSI 970a-g43 motherboard
AMD FX-6300 cpu
ATI Radeon HD 4550 graphics card
4x 2GB RAM sticks
2x 500 GB 3.5" SATA hard drives
CoolMax 700W psu
16x r/rw DVD burner
cheapo SD and others card reader that fits in the floppy drive bay
Older PC tower that has a temperature sensor built into it
I built it around November 15th, and it worked until a couple days ago (December 12th I think), when it started doing the sudden shut-off thing. Same as Adresch described: shuts off, tower light blinks, have to flip the i/o switch off and back on to boot again. I consulted a friend for some suggestions, and he said I should put a water cooler in there, because the stock heatsink that comes with most processors are junk. So I went out and bought a Corsair H55 water cooler and installed that.
The computer seemed to run for a bit longer before shutting off. I loaded up the BIOS software, SpeedFan, and HWMonitor. SF said the CPU was running average of 48*C, and GPU was averaging 51*C. The CPU's highest was at 61*C and its lowest was 36*C. BIOS software said CPU was at 35*C the whole time. HWMonitor listed the GPU at 51*C, and the CPU at 7*C. These are all very inconsistent with each other as far as I can tell, so I don't know what to make of these readings. Didn't seem to much matter as the computer continued shutting off.
My options then being replacing the PSU or the motherboard, I decided to replace the power supply, since I was just within the 30 days. Switched for a ThermalTake TR2 700W. Before installing it, I pulled the tower's CPU temperature sensor wire from between the water cooler heatsink and the CPU, just in case. Then I installed the PSU, checked and rechecked all of the connections, and turned it on.
Nothing.
I then spent the next two hours rechecking everything, even unplugging everything and putting it back together. Still nothing. The best I could get was a flicker of the tower light and the fans doing a quarter turn before ceasing movement. The red LED on the front of the SD card reader stayed on the entire time, though, so I guess it was getting at least a trickle of power. I also removed everything but the PSU, motherboard, CPU, and one stick of RAM. Still no power. I think the new PSU may have been open box, so I'm returning it today for a different one, and even bumping it up to 850W.
I'm not sure that will solve my original issue though, so I'll be looking for a heatsink to put on the VRMS as mentioned. Just thought I'd get this down in a relevant thread in case anyone had other thoughts on what could be going on.

Sync issues with iPhone 6 Plus and iTunes

I'm having issues with syncing my iPhone and iTunes.
I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied). The longest this has occurred for is 2hrs. After this time I have stopped the sync and ejected my iPhone.
I had another issue with my phone when playing music. When going to play music, I was given the error message saying that the song could not be found. I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'. I found the song and could see that next to the song was a small what looked like dotted grey circle. After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song. I did this and this was when the issue occurred again.
I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again. This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone' tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play. All played ok.
I have read lots in the Apple forums about lost of difference reason this may be happening. Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it. My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
I all so had this issue with my old iPhone 4S. The problem occurred when running iOS 7 and 8 on the 4S. When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app. However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
I am in contact with Apple Care, but this is such a long process.
So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful. Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
I will update my post with any information provided by Apple Care as and when I get it.
Thanks for reading and thanks for your time.
Mark.

Hi,
Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
Firstly I just want to updated my details about what version of Mavericks I'm running. I'm running 10.9.5 - I put the wrong version down in my original post.
So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices.
The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem. For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD, this was added and encoded with the version of iTunes that was running at the time of adding the music. So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version. However, due to the amount of music that I have, this is going to take a long time. When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone. This may just have been luck though at that time.
Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on. The only down side to this fix as far as I can see at the moment, is that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
Thank you all for your comments.

Issues with my USB HDD and can't uninstall the USB driver

Similar Messages

Maybe you are looking for