It's Obvious that the 7.3 vs. of itunes has major problems.
I can't find the customer support phone #'s for itunes. This site is the only place to post discontent with the new version of itunes. The 7.3 freezes up and will not operate. I would like to know how to get the older vs. of itunes back. They can take the 7.3 and stick it in their little nanos. IS ANYONE THERE WHO CAN FIX THIS PROBLEM? Apple! Where are you?
As the search feature has been re-enabled, I'd recommend using it to find threads that talk about downgrading. There have been links to older software.
Similar Messages
-
I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.
When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up. -
ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Revision: 11992
Revision: 11992
Author: [email protected]
Date: 2009-11-19 10:29:17 -0800 (Thu, 19 Nov 2009)
Log Message:
Ensure that the textFlow of a RichText always has a "damage" handler when you get it, so that when you mutate the textFlow the RichText updates.
QE notes: None
Doc notes: None
Bugs: SDK-23869
Reviewer: Carol
Tests run: ant checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23869
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.asHey jerzeyzfynest,
Unfortuantely, no -- Geek Squad Protection plans require that repairs be sought before a product is considered for replacement. This means your current laptop would only qualify for an exchange if one or more of the following conditions are met:
A factory-authorized technician has determined that repairs cannot be completed
A factory-authorized technician has determined that replacement parts cannot be obtained
The unit has accrued two previous qualifying repairs a factory-authorized technician has identified a third qualifying hardware failure
A detailed overview of this policy may be found in your plan documentation, as well as in the sample brochure available on the following site:
http://bbyurl.us/TandC
If your current laptop hasn't been performing up to par, then I'd encourage you to speak with a technician at your local store when you have the chance to do so. Diagnostic services are included in your service plan coverage, so we'd be glad to help find out what's going on.
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message -
When I try to sign into my iCloud.i get a massage saying that The maximum number of free accounts has been activated on this I pad. Please can you tell me how to get round this problem ?
All you can do is re-use on of the accounts previously created on your device, or create an account to use on another iOS device or Mac (running OS X 10.7.2 or later), if you have one.
-
The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded. How do I get it to start playing again before the rental expires?
Hello zooeyme,
I'd suggest reporting the issue to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen -
I bought an iphone 5 in the United States. It has major problems with the video. In Italy not fix it. What am I to do?? back in the United States
The iPhone warranty is not international. If you bought it in the US you can only get service in the US. You will need to take it in to an Apple store in the US.
-
How do I fix my mac so that the window I am looking at has the focus?
I am a new mac user and at present beyond comprehension of how people cope with mac if they are not primarily mouse oriented.
Current problem.
I close an app using apple key W
It closes
I am looking at a window of another app. I want to close that too. Apple key W. Nothing. This window does not have the focus. No keyboard actions will make it do anything. And the bar at the top of the screen is still the bar for the app I have just closed, but that does not respond to the keyboard either. At this point, no keyboard action will affect either app.
As a one time developer I have to say that in any context I am familiar with this would be considered a major show stopping bug, and the programmer would get into a lot of trouble if the software went out in this condition.
Certainly, for a user who lives by the keyboard coming from linux / windows, both of which do what I consider sane and sensible things in all places and at all times, this is a major *** situation!
Please can someone tell me how to get my mac to behave more 'sensibly'.
I want the window I am looking at, the only window visible on the screen, to have the focus. Always. No matter what! Which I think is entirely reasonable.Thank you for all your points.
It can't automatically be the one you want without some instruction from you - the cmputer is not a mind reader, can not seenwhat holds your attention.
Darn!
In Windows and Linux it is automatically the last one in use before you closed the window(s) that have been closed. This is the window naturally lying topmost in the stack of windows on the screen. It is this window which is exposed in the circumstance I am describing. And it is this window which I expect to have the focus in this circumstance.
More to the point, and has been mentioned several times - unlike Windows, when you close the last window of a Mac app, the program is not quit (usually - there are exceptions). The program is still running, as is indicated by the 'running light' on the Dock (the small bluish oval underneath the app's icon in the Dock), even though it has no windows open.
It is not running with an invisible window being the focus - it has no windows at this point, not even an invisible one.
Yes, understood - naturally enough after a few hours exposure to the mac interface. And I would assume that none of the quitted windows in that app will have the focus, which would be nonsensical.
The overall 'focus' is still on that program, because it is still running (you closed its windows, but did not quit the program) and will remain so until you instruct the Mac to switch to a different program in the stack (or queue, or rotation, however you choose to consider it).
Yes. WHY?
Whether program closes when you close the last window is an interesting point. Mac do it different to the others. OK. But this program should not have the focus, unless there is something useful you can do with it. I would have thought obviously.
Why have a program quit when you close its last window? Doesn't make sense to me - can't tell you how many times that behavior with a PC has irked me. Consider this scenario - you're writing a memo to someone in TextEdit. You print the memo off. You're done with that doc, but then want to write a letter to someone. So you close the window for that file, which happens to be the last window open for TextEdit. If TextEdit should quit at that point, you'd need to restart it again before you can write the letter. But - it doesn't quit; it's still running. So instead of restarting it, all you need do after closing the memo's window is press Command-N for a new, blank doc in which you can write the letter.
I agree. This is very useful - once you are used to it. Certainly, this is an excellent option, though it seems crazy that it is not a readily settable option. Equally though, if I was going from mac to windows or linux, I would be totally peeved if this behaviour was not a settable option.
Regardless, this is the way it is in the Mac world, and has always been as far back as I can remember it (and I go back to OS 1 on a MacPlus). As far as 'industry standards' go, there are many who feel that Macs set the GUI standards a long time ago, and that those wo have imitated it have not done a good job of their implementations.
I totally take your point. And I am ready and willing to learn a new interface, naturally, though I had no idea the journey would be so extensive. [] "More ruddy stairs" says the elderly ghost of the recently deceased David Emery grumpy old git character, who hobbles along with a cane, confronted with a loooong flight of stairs up to heaven []
- elsewise I'm going to cause myself an inordinate amount of frustration when my impossible-to-meet expectations aren't met.
Of course I have impossible-to-meet expectations, I got a mac, the doyen of computers. I thought a faint mysterious hint of a sound might be present in the faint whirr of the fans at start up, like far off angelic choirs, and that everything would be easy and wonderful, as well as beautifully easy on the eye.
But I still think that the focus shoud go somewhere useful. And if it stays with the app running with no windows, then at the very least it should be one keyboard shortcut to open a window for that app, or reopen the last window of that app. Or, gasp, it should go to the last window in use before the windows of the app that just got closed, the one on top of the stack, the one straight in front of you, currently impervious to any and all keyboard strokes. And, given the price and sophisication of macs, and the significant gap between the GUI standards of the major players, however long they have respectively been in business, I think it is the kind of thing which should be settable. Indeed, confident that this was settable or 'fixable', I embarked on this thread in the first place.
EOL -
When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
ThanksLet's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I suddenly cannot open my iTunes. Was working fine a few weeks ago but now a message comes up asking me to use the English version. (I am using Windows 8)
Hey MichelleOland,
Thanks for the question. I understand that you are experiencing issues opening iTunes for Windows. Let’s try completely removing iTunes and all related components and then re-installing from Apple’s website:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Additional information:
If you can't install or update iTunes for Windows - Apple Support
http://support.apple.com/en-us/HT201668
Thanks,
Matt M. -
When I installed itunes into my old computer (loaded with Windows Vista) it deleated my CD burner and would only allow me to burn via itunes - I had to go in to Best Buy to have them fis the problem but was told not to download new updates for itunes or it would do the same. with this fix I am not able to burn CDs from itunes which is a bummer. If I download itunes onto my new computer (loaded with Windows 7) is it going to do the same thing or has this problem been resolved?
Copy them from your old computer, or your backuo copy of your old computer. to your new one.
The music sync is one way - computer to ipod. the exception is itunes purchases. -
What the...? ITunes has "Stopped Responding"
I recently updated my OS software and now suddenly Itunes has decided to stop working. I have tried rebooting a few times, but still nothing.
When I restarted, I clicked on the Itunes icon, it bounced a few times in the dock and then stopped but the app screen and GUI never came up. When I mouse over it and hold down the mouse button, besides the normal "Remove from dock/Show in finder" etc. in the menu, it also says, "Application Not Responding" but it is greyed out.
I had read on the Apple forum to nuke an Itunes .plist file, so I did and rebooted. After nuking the file, it was more of the same, but this time, the license agreement comes up. I click agree and the menu bar appears, but still no app screen or GUI.
Arrrgggh. What is going on and how do I fix this?Re-installed 10.4.7 combo updates. Seems to work for now.
-
I have down loaded an App from the Apple store. I see the icon in the the finder folder as an Itune app on my mini Mac. Problem: can not open the App-Need assistance please? The app resides in the Finder application folder.
Works with ease on my Ipad.bobbydunn21@gmailcom wrote:
Thanks
You're Welcome. -
I have several keynote presentations on my newish computer but am not unable to open them. I get the message "keynote cannot be installed because of a problem" (unspecified). Does anybody know why this happend? Does it related to using Microsoft "University" 2011? How can I fix it? Thanks!
Thank you for your reply.
I just tried the 3-step process suggested on http://support.microsoft.com/kb/2431353
This all started when my mouse/thumb clicker was going crazy. Found an expanded battery. Obviously need a new battery. Unfortunately must wait 6 weeks to get my new battery. Meanwhile, I'm running my computer on AC only, as there appears to be no other option. I was informed that when using AC only (no battery) some high-energy-use programs like Office might not function.
Do you know if there is away to use office even when just using AC and not having the battery in? I'm doubting if I have other OSX problems because everything else works: email, safari, itunes, iphoto, quicktime, etc . . . . ?
ciao,
Masego
Maybe you are looking for
-
I got a Mac and i downloaded new music on it and im trying to sync the music on this computer to my iPhone which is hooked up to another iTunes and iTunes is saying " An iPhone can be synced with only one iTunes Library at a time. Erasing and syncing
-
I have downloaded and installed the Google tool bar. I have the tool bar checked but it does not show up. It appears the menu bar on top drops down to make room for the tool bar but the icons never show up. I can't figure out what is blocking it from
-
How Can i Make A Multipage Pdf in Cs5
Hi i was using Photoshop Cs3 in work and they upgraded all the photoshop versions to CS5 . Now i can't find where i can create a multipage pdf. I was using the pdf tool so often it's important for me. I'm stuck thanks for the helps. Jeffrey Cole www
-
Problem with LiveCycle 8.0 Form in Acrobat 7.0
I have created a form in LiveCycle 8.0 that contains text fields that have multiple lines enabled, are sized to fit height, and are in subforms that are set as flowed and allowed to break across pages. When I test the form in Acrobat 8.0, the fields
-
I've been having an issue with smart albums. It seems that in iPhoto 11, they won't update automatically. I can force them to update by getting info on the album's settings and then choosing "ok" without changing anything. This, however, is a royal p