Itanium: Rfc call for SXMI_XMB_SYSLOG_READ fails Error INVALID_DATE_TIME

I have a distributed NetWeaver 2004S Environment: Main SAP Instance and Database are located in a CST Time Zone on the same machine. A dialog SAP instance, installed on an HP-UX Itanium Host, is located in a PST Time Zone, but, the system clock set for CST time - 2 hours behind the main SAP instance host system clock time.
My application is installed on the HP-UX Itanium Host and connects to the local (dialog) SAP instance, and makes RFC library calls to collect data. For Syslog data, the RfcCallReceive call is made to function SXMI_XMB_SYSLOG_READ with all the required input parameters. This call succeeds for the first time, but, fails all subsequent times if the call is repeated at 1 minute interval. Following error message is returned:
gid:105 key:INVALID_DATE_TIME
The date times on start and stop times are correct - they match very well with the system clock time.
Now, if I increase the repetition interval from 1 minute to 5 minute, the Rfc call to the function SXMI_XMB_SYSLOG_READ succeeds for the repeated calls.
Please note that the Rfc application was compiled on an HP PA-RISC development machine, and, uses ARIES emulator to run on HP Itanium Host.
There is another piece of information I can provide here if that helps: I am able to make 1 minute spaced repeated Rfc call to SXMI_XMB_SYSLOG_READ function with success on a PA-RISC dialog instance of another SAP deployment that has the main SAP instance plus database on one machine in a CST time zone, and, the dialog SAP instance hosting the application on PA-RISC host on a different machine, but, in the same CST time zone.

Hi Manoj,
The Application and the dialog instance are on the same machine - HP-UX IA64. This is what TZ has on this host
TZ=CST6CDT
How do I synchronize the application and the SAP dialog instance - they are located on the same physical machine?
The main instance and the database are on another machine - SunOS5.10 sparc. This is what TZ has on that host
TZ=US/Central
The date on HP-UX IA64 (dialog instance) is
date
Fri Nov 21 13:13:35 CST 2008
The date on SunOS5.10 sparc (Main Instance + Database) is
date
Fri Nov 21 13:13:35 CST 2008
Please note that the dialog instance and the main instance are located geographically in PST and CST time zones - being 2 hours apart.
I appreciate very much your effort. Looking forward to the follow-up.
Thanks

Similar Messages

UPGRADE : RFC call to subst_save_upgeval_db failed with key UPDATE_ERROR

Hello.
We are upgrading our NW 7.01 to NW 7.3 ABAP.
In Postprocessing phase MAIN_POSTP/CREATE_UPGEVAL we encounter the following error:
ERROR: RFC of "subst_save_upgeval_db" failed
key: ERROR UPDATE
message: EXCEPTION UPDATE_ERROR RAISED
Here is the troubleshooting ticket:
This trouble ticket was created by SAPup on 20111125120155
SAPup broke during phase CREATE_UPGEVAL in module MAIN_POSTP / Post Processing
Error Message: RFC call to subst_save_upgeval_db failed with key UPDATE_ERROR (UPDATE_ERROR): EXCEPTION UPDATE_ERROR RAISED
Summary of SAPup:
SAPehpi Release:        lmt_002
SAPehpi Version:        SAPup release lmt_002 version 41.001
Start Release:          701
Target Release:         730
Summary of host system details:
SID:                    TA1
Host:                   sapta1
MS Host:                sapta1
GW Host:                sapta1
Start Path:             /usr/sap/TA1/DVEBMGS02/exe
Kernel Path:            /usr/sap/TA1/DVEBMGS02/exe
Summary of operating system details:
OS Type:                Linux X86_64
OS Version:             2.5
Summary of database details:
Database Type:          ora
Database Version:       11.2.0.2.0
Summary of RFC details:
Host:                   sapta1
GW Host:                sapta1
Client:                 000
Destination:            TA1
Language:
System No.:             02
here is the PHASES.LOG:
1 ETQ201 Entering upgrade-phase "CREATE_UPGEVAL" ("20111125120352")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_POSTP/CREATE_UPGEVAL'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'STORE_DB'
4 ETQ359 RFC Login to: System="TA1", Nr="02", GwHost="sapta1", GwService="sapgw02"
4 ETQ232 RFC Login succeeded
Do you have anu ideas ?

Here is the dev_rd log:
Fri Nov 25 14:07:04 2011
***LOG S23=> GwIDisconnectClient, client disconnected (020) [gwxxrd.c     10423]
***LOG S74=> GwIDisconnectClient, client disconnected ( sapta1) [gwxxrd.c     10434]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     10451]
***LOG S0I=> GwIDisconnectClient, client disconnected ( SAPCPIC) [gwxxrd.c     10464]
LOCATION    SAP-Gateway on host sapta1.sap.fr.alten.com / sapgw02
ERROR       connection to partner 'localhost.localdomain:0' broken
TIME        Fri Nov 25 14:07:04 2011
RELEASE     720
COMPONENT   NI (network interface)
VERSION     40
RC          -6
MODULE      nixxi.cpp
LINE        4850
DETAIL      NiIRead: 127.0.0.1:0
SYSTEM CALL recv
COUNTER     58

RFC call to spda_get_stack_info failed.

Hi All,
When carry out the system upgrade from 47x200 to 701 EHP4 SR1,
has a error in get stack info in the preparation step.
From windows 2003 x32 MSsql 2000 upgrade to windows 2008 R2 and MS sql 2008 R2.
Error message set: 'RFC call to spda_get_stack_info failed with key
RFC_ERROR_SYSTEM_FAILURE (SYSTEM_FAILURE): Error ST_MATCH_FAIL occured.
P1=element-start P2=sp-stacks P3= P4=element-start P5=SMSDXML P6='
Thanks.

Hello,
this error is happening because you're using an old version of SAPup and/or an old version of the Upgrade FIX file. Please make sure you're running the very last version of these files and repeat the process from the beggining.
Also the file ../EPS/in/SMSDXML.xml is actually not the XML file you want to use, it is a for R/3 release with
SAP_BASIS 4.x, the EHP stack configuration for start releses 6.20 and higher, these text files do not match anymore.
This can contribute for EHP_INCLUSION phase failing. Have you renamed it? It usually is a long file name, for example: SMSDXML_EP1_20111002154601.221.xml. Please make sure you or someone have not made manual changes in this xml.
I hope this information helps.
Best regards,
Tomas Black

Flat File-to-RFC question, multiple RFC calls for one file.

Hi guys,
I'm quite new to XI / PI and I have a question regarding a File-to-RFC scenario we're trying in NW PI 7.1.
We have a flat file which has two lines with two fields each, let's take this as an example :
001,001
002,002
The files needs to be converted to XML and then transferred to the RFC program which will update a table with the values above.
In the ESR I've created 3 data types (z_row1,z_record1 and z_fileinput1), 1 message type (z_file2rfc_ob_mt), 1 message mapping (z_file2rfc_mm), 2 Service Interface (z_file2rfc_ob_si and z_file2rfc_ib_ztestpi) and 1 operation mapping (z_file2rfc_om).
In the Integration Builder (ID) I've created everything required (The sender and receiver communication channels, sender and receiver agreement, receiver determination and interface mapping).
We're also using content conversion to convert the flat file to XML, this does seem to work because I see all the lines/field in the message when it gets into PI. The problem is that the RFC can only accept two fields at a time and only the first line gets updated. I see that only the first line gets sent to the RFC.
How can I make the RFC call for each and every line ?
Thanks !!

Create the RFC with table, which takes multiple lineitem as input and update the table in single call.
If you want response back then call RFC as synchrounous else in Asynchrounous mode.
By doing this in single call it will update the complete table.
Gaurav Jain
Reward Points if answer is helpful

RFC Call for EarlyWatch

Hi,
What is the RFC Call for EarlyWatch with regards to extracting a monitoring report?
Thanks
John

Hi John,
Solution Manager can use its own BI or a remote BI.
If it is local the RFC will be 'NONE'
The table is E2E_WA_CONFIG
Type = SAP_BID
LINE = 1
STRING = NONE
If there is an entry of the Type =SAP_BID_M it will overrule SAP_BID
The STRING= 'value' will be the RFC that is used.
Both SAP_BID abd SAP_BID_M are found in Table E2E_WA_CONFIG
Regards,
Paul

CALL TO SYSLIB FAILED ERROR WHILE SAP 4.7 DATABASE INSTANCE INSTALLATION

I am trying to install SAP 4.7 with Oracle 9.2.0.1 on W2k SP3. I have installed central instance successfully. While installing Database instance, almost at the end of installation, i am facing problem with error message call to system library failed. i am attaching the log. Please help
PHASE 2007-06-25 00:53:53
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-06-25 00:53:53
SAP Web Application Server
PHASE 2007-06-25 00:53:53
Request common parameters of SAP System
PHASE 2007-06-25 00:53:54
Create operating system accounts
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:55
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:56
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:53:57
Request operating system user information
PHASE 2007-06-25 00:54:00
Adapt filesystem
PHASE 2007-06-25 00:54:00
Prepare check/adapt SAP instance filesystem
PHASE 2007-06-25 00:54:00
Extract archives
PHASE 2007-06-25 00:54:01
Extract SAP System kernel archives
PHASE 2007-06-25 00:54:02
Create service ports
PHASE 2007-06-25 00:54:02
Generate instance profiles
PHASE 2007-06-25 00:54:02
Versionize default profile, instance profile and start profile
INFO 2007-06-25 00:54:07
Copying file E:/SAPinst ORACLE KERNEL/keydb.xml to: E:/SAPinst ORACLE KERNEL/keydb.3.xml.
INFO 2007-06-25 00:54:07
Creating file E:\SAPinst ORACLE KERNEL\keydb.3.xml.
WARNING 2007-06-25 00:54:11
Error 1314 (A required privilege is not held by the client.
) in execution of a 'CreateProcess' function, line (276), with parameter (E:\oracle\ora92/bin/sqlplus.exe /NOLOG @ora_scr_tmp.sql).
ERROR 2007-06-25 00:54:11
MDB-06029 Caught exception while trying to start script executing application: [E:\oracle\ora92/bin/sqlplus.exe].
ERROR 2007-06-25 00:54:11
MDB-06030 A call to the system library failed. System error message: [Unknown error].
ERROR 2007-06-25 00:54:11
MUT-02011 Internal error: A call to syslib failed. System error message: Unknown error.
ERROR 2007-06-25 00:54:11
FJS-00012 Error when executing script.

What do mean with administrative priviledges? there is no administrativ priviledge on Windows. We only have a local group administrators.
in 4.7 sapinst will put erpadm and sapserviceerp to the local administrators group. There is no need to do it manually.
But this will not help in this case, because local Administrators did not have the rights
- replace process level token
- act as part of the operating system
if you don't believe me have a look at gpedit.msc Local Computer Policy - Computer Configartion - Windows Settings - Security Settings - Local Policy - User Rights Assignemt.
But as I already told you, log on and log off will fix this rights problem.
2. regarding memory: RAM is physical Memory
did I read right you are trying to install 4.7 on a 256 MB box?
forget that! 256 MB is often too less for office application. Enterprise Style applications and database will need at least ten times 256 MB (and even that is too small).
By the way Pagefile needs to be at least 4-8 GB.
Peter
Peter

Rfc Library Call to SXMI_XMB_SYSLOG_READ : INVALID_DATE_TIME error

I have a distributed NetWeaver 2004S Environment: Main SAP Instance and Database are located in a CST Time Zone on the same machine. A dialog SAP instance, installed on an HP-UX Itanium Host, is located in a PST Time Zone, but, the system clock set for CST time - 2 hours behind the main SAP instance host system clock time.
My application is installed on the HP-UX Itanium Host and connects to the local (dialog) SAP instance, and makes RFC library calls to collect data. For Syslog data, the RfcCallReceive call is made to function SXMI_XMB_SYSLOG_READ with all the required input parameters. This call succeeds for the first time, but, fails all subsequent times if the call is repeated at 1 minute interval. Following error message is returned:
gid:105 key:INVALID_DATE_TIME
The date times on start and stop times are correct - they match very well with the system clock time.
Now, if I increase the repetition interval from 1 minute to 5 minute, the Rfc call to the function SXMI_XMB_SYSLOG_READ succeeds for the repeated calls.
Please note that the Rfc application was compiled on an HP PA-RISC development machine, and, uses ARIES emulator to run on HP Itanium Host.
There is another piece of information I can provide here if that helps: I am able to make 1 minute spaced repeated Rfc call to SXMI_XMB_SYSLOG_READ function with success on a PA-RISC dialog instance of another SAP deployment that has the main SAP instance plus database on one machine in a CST time zone, and, the dialog SAP instance hosting the application on PA-RISC host on a different machine, but, in the same CST time zone.

Hi Manoj,
The Application and the dialog instance are on the same machine - HP-UX IA64. This is what TZ has on this host
TZ=CST6CDT
How do I synchronize the application and the SAP dialog instance - they are located on the same physical machine?
The main instance and the database are on another machine - SunOS5.10 sparc. This is what TZ has on that host
TZ=US/Central
The date on HP-UX IA64 (dialog instance) is
date
Fri Nov 21 13:13:35 CST 2008
The date on SunOS5.10 sparc (Main Instance + Database) is
date
Fri Nov 21 13:13:35 CST 2008
Please note that the dialog instance and the main instance are located geographically in PST and CST time zones - being 2 hours apart.
I appreciate very much your effort. Looking forward to the follow-up.
Thanks

RFC call failing due to UNICODE implementation

Hi
We are trying to connect to a SAP system using the JCO (SAP-JAVA Connectivity). We are passing the user name as an input parameter and in turn the SAP system send back the no. of item (ABAP Type integer) pending for the user name to the java and its inserted/updated in Oracle DB (which does accept the unicode characters).
It was all wokring fine untill the SAP system has been migrated to Unicode upgrade. Now the RFC call is getting failed from our system. On analysis we found with debug, that the user name is not getting accepted by the SAP system and throwing the error -says Exception in thread "main" com.sap.aii.proxy.framework.core.BaseProxyException: Conversion error between two character sets., error key: RFC_ERROR_SYSTEM_FAILURE and at the SAP end the error says "Conversion of "UNAME" from code page 4103 to 4102 is failed". The unicode change in SAP system cannot be reverted back due to some constraints.
Can you please help, how can we pass the user name as encoded in character set 4102 or any other solution so that it can be accepted by SAP and run the Function module and return the data.
Many Thanks
Snehil Joshi

Check RFC destination in Tx SM59. You must have one tab for unicode settings.
Regards.

RFC Lookup error :No RFC authorization for function module

Hi All,
I have created RFC in the PI system and enabled it as remote. I am working on PI7.1
I have imported RFC into Repository.But when i am trying to execute RFC lookup function in the graphical mapping I am getting No RFC authorization for function module error.
Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> com.sap.aii.mapping.api.StreamTransformationException: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> at com.sap.aii.mappingtool.flib7.RfcLookup.cacheMore(RfcLookup.java:95) at com.sap.aii.mappingtool.tf7.rt.AMultiResIterator$MultiOutIterator.gotoNextContext(AMultiResIterator.java:95) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:315) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.transformInternal(ExecuteXiMappingCommand.java:197) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.execute(ExecuteXiMappingCommand.java:94) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1005_10002.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304) Runtime exception when processing target-field mapping /ns0:MT_FileDummy/File; root message: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception>
13:42:37 End of test
Edited by: Rams on Apr 17, 2009 1:43 PM

Hi! Rams,
I think the issue is related to Authentification Issue..Even though u did correctly please check once the below
1) Check any Typo Erros are there while configuring or giving names in Lookups.
2) please check Authorizations like ID and PWD and Sufficient Roles
3) Also please check did u given paramters correctly while doing RFC look up I mean paramers , Binding parameters and RFC channel name and adapter type or Simple type it must be an adapter
4) In ID part while configuring Interface determinaition you need to give your RFC look Up name there also..Hence check whether u given or not if yes correctly or not
5) Also remember one thing if your scenario is correct mostly you can know the result in mapping itself it seems while testing Message mapping and Interface mappings give your RFC look up paramters in the parameters tab present in TEST tab and later in Document tab give Input...and execute it works if it doesn;t works and if there is an issue with RFC you can get there only..ok
Also go through the below document::
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457]
I hope this will give u brief idea...
Also check with basis while taking SAP_ALL authorization so that first u ill came to know whether issue is related to authentification or RFC module itself remote enabled and also do SXI_CACHE also ocne to refresh ESR and ID objects..
Regards::
Amar Srinivas Eli

"No Receiver Determined" in BPM Sync RFC Call

My scenario is xml file -> XI BPM -> RFC1 -> RFC2 (will call RFC2 if RFC1 is successful).
I am still just trying to get the RFC1 call working properly. I have been using blogs 1822, 1403 and 1926. I have also used some related BPM threads. It seems to be making the RFC call properly, but failing on the response.
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
These docs show my IB Repository and Directory setups. Can anyone look at them and tell me what is missing? Thanks in advance!
http://webpages.charter.net/kpwendel2/bsmDir.jpg
http://webpages.charter.net/kpwendel2/bsmRep.jpg

Keith,
the problem is quite clear.
In your BPM, you have a synchronous interface in your sync send step.
However, in configuration, you have configured two asynchronous interfaces.
To be able to use sync send step in BPM, your RFC needs to be able to send a response back. Then you need to have two message mappings (one for bpm->rfc messages, and other for rfc_response -> bpm_response messages) and a interface mapping between the 2 sync interfaces (bpm_sync_int -> rfc_sync_int) using these 2 message mappings.
Also, some hints:
1. Don't do these mappings in BPM transformation step. You can execute them outside of BPM. Doing this, you will get better performance and also won't need to create abstract interfaces for RFC messages.
2. Use configuration wizard in Integration Directory (first, remove and reimport your BPM in Integration Directory). This way, you avoid different interfaces errors.
Regards,
Henrique.

How to loop through single XML File and send multiple RFC calls?

I am looking for the best approach to use for making multiple RFC calls (can be sequential) using a single XML file of data. I have been attempting to get a BPM loop working, but to no avail. My RFC only accepts a single set of delivery input and I have been told to try to work with it as is.
input xml sample:
<?xml version="1.0" encoding="UTF-8"?>
<ProofOfDelivery>
   <POD>
      <delivery_number>1</delivery_number>
      <carrier_name>UPS</carrier_name>
   </POD>
   <POD>
      <delivery_number>2</delivery_number>
      <carrier_name>UPS</carrier_name>
   </POD>
</ProofOfDelivery>
I need to make a synchronous RFC call for each set of POD data.
Thanks in advance!

Thanks for the inputs.
I tried with a BPM and multi-mapping transformation before a ForEach block. I am getting this error:
Work item 000000028028: Object FLOWITEM method EXECUTE cannot be executed
Error during result processing of work item 000000028029
com/sap/xi/tf/_ProofOfDeliveryMultiMapping_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntim
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
Probably because I am not making/using the container objects properly. Here is a screenshot of my BPM. Can anyone spot my issue or point me to an example on this sort of container use?
[http://kdwendel.brinkster.net/images/bpm.jpg|http://kdwendel.brinkster.net/images/bpm.jpg]
Thanks

RFC call having problem while calling from webdynpro

Hi ,
I am facing a strange problem .In my webdynpro i have a RFC function module . the structure is like this.
Loop.
<GET current system>.
TRY.
call <RFC FUNCTION MODULE> DESTInation <own system> .
ENDTRY.
ENDLoop
With in the Function module we have created a BDC seesion.
Here the loop is running for 10 times .for the first time it is the rfc call is perfect and a session is created in sm35.
For the second loop run the system is going to hang.and when i checked sm35 the next day 1 session is created (for the second loop)
Like this the session are created in different days .And the session created times are like00:00:04,00:00:08 etc.
I have checked if any hold time is there for the session but there is noting like this .
And i digged more and checked in SM50 there the call is running in background and it is connected some other system though i have given the target system as own system.
please advice me about this and how to find the root cause for this.
thanks

Thanks for your reponse .
Here the problem is it has already been developed now the Bug is the function call is still running and the sessions created as
below
17.06.2010     00:00:30     SAPMSSY1
17.06.2010     00:00:28     SAPMSSY1
16.06.2010     00:00:36     SAPMSSY1
15.06.2010     01:21:46     SAPMSSY1
15.06.2010     00:59:33     SAPMSSY1
15.06.2010     00:01:06     SAPMSSY1
Now teh problem is why the sessions are not created at the same time i executed it.ie,on 11:06:2010.
so,please let me know why is call is taking that much long time .(it is very rare for RFC call for such a long time ).

BOM Explosion not happening in RFC call...

Hi All,
We are facing a strange issue in our project. We are using a RFC call for order creation. When we execute the FM through SE71 using a BOM material, the BOM gets exploded correctly. However, if the same material is passed through the RFC call, it is not getting exploded.
The BAPI used for order creation is BAPI_SALESORDER_CREATEFROMDAT2.
If any of you have encountered such an issue and know any resolution, please let me know at the earliest.
Thanks in advance.

Make sure that you are converting to the internal format when calling via RFC. Meaning, that you need to have leading zeros for things like sales document numbers. So if your sales documennt number is 12345, make sure that you are passing it to the RFC call, like 0000012345.
Regards,
Rich Heilman

Custom Metadata Extension with RFC call

Hi all,
I am trying to create a custom metadata extension that pulls data from ECC via an RFC call and returns values as a IMetaValueList in the getAllowedValues method.
Does anybody have any experience?
Thx
Ismail

Hello Sanjeev,
- I Kept External break point in SRM where we are calling RFC Call for ECC, I am able to debug untill the RFC call,
- But, on RFC Call ( CALL FUNCTION ZABC destination <Destination>), when I press F5 it is not going inside the function module.
- I am getting Export parameter values, means ctrl is going to ECC, but not able to debugg our BE system -ECC.
Pls suggest. Thanks for your quick reply.
Regards,
Mohan Vamsi

Remote function call (RFC) for WS_DELIVERY_UPDATE fails w/o error message

Dear Experts,
Iu2019m using WS_DELIVERY_UPDATE to post goods issue against outgoing delivery. SE37 works fine.
RFC call from external program with the same parameters fails without returning any message.
It aborts during call and after that it becomes invalid.
Also calling BAPI_TRANSACTION_COMMIT does not help.
Any idea why SE37 works fine but RFC fails?
Anything I am missing?
Many thanks
Regards
JW

There could be many reasons, I'd suggest to get your Basis admin involved. Take a look at the ABAP dump (ST22), update termination (SM13) or RFC errors (SM58). Although I doubt you'll find something inside SAP, since it seems that RFC call itself fails.
This function is not a BAPI, so BAPI_TRANSACTION_COMMIT won't do any good. All it does is COMMIT WORK actually.

Itanium: Rfc call for SXMI_XMB_SYSLOG_READ fails Error INVALID_DATE_TIME

Similar Messages

Maybe you are looking for