Item access inside tab

Hi there
Have a single page with with tabs and below the tabs one region.
I want all users (incl. the non logged in) to see the page.
But in the regions I want some access restictions.
This works fine outside the tabs.
In side the tabs, every users (logged in or not) can see everything.
Page Access property: display to public users, enable item security (both checked)
tab page acess proptery: Inherit access settings from the page and display tab to public users (both checked)
On the item I defined item level access privilege and the the access to one single user.
No effect, I still can see all items (even I'm not logged in)?!?!?!?
Is this an error, anybody got the same problem???
thanks for helping
markus

This is a known bug. Fixed in the next release (9.0.2.6 - early 2003).

Similar Messages

How is calculated SC current quantity in item basic data tab ?

Hello,
We work on a SRM 7 release with PPS.
As it is not possible in Extended Classic Scenario to use local contracts (that is not replicated into ECC backend) as sources of supply for "Limit" item Shopping Cart creation, we create "Free text" (Description) SC item.
For this kind of SC item, according to a specific and dedicated UoM, SC quantity is given as mandatory to be '1'. Then, users populate price. So, in this way, we have an "Amount" SC item being equivalent to standard "Limit" SC item.
Then, at corresponding PO item creation, SC item quantity ('1') is populated into PO item gross price and SC item gross price is populated into quantity PO item in order to be able to confirm in "quantity" our PO.
This process is OK.
Nevertheless, we have two sides effect after PO is generated :
1- Field "Current quantity" (not sure with the name - i do not have SRM system in front of me) for SC item basic data tab seems to be populated with value being difference between SC item quantity and PO item quantity.
For example, if SC item quantity is '1' and PO item quantity is '20.000' in SC item basic data, order quantity is '1' and ordered quantity is '20.000' with is normal. But "Current quantity" (below "Ordered quantity") is '19.999-' instead of '0'.
2- After a first confirmation created based on SC (not on PO, this is important), SC POWL button "Create confirmation" is greyed out. This seems to be normal behavior as PO item quantity confirmed first time can not be lower than 1, this confirmed quantity is greater than SC item quantity. So, there is no SC outsanding quantity...
Our two problems should be linked: this is due to how "Current quantity" for SC is calculated.
As our customer users do not have access to PO POWL, we can not use create Confirmation transaction in order to use PO as reference document to create confirmations.
In a technical point of view, field concerned is PS_SC_OUT_QUAN (not sure with this name...) for context ITEM_BASIC_DATA from view V_DODCSC_I_BD (WDC /SAPSRM/WDC_DODC_SC_I_BD ).
I found enhancement for this field ( /SAPPSRM/WD_SC_I_BD_QUAN ) but this enhancement has no method !
I tried to debug some methods from Class /SAPSRM/CL_CH_WD_SET_FACADE, but i did not find yet where calculation is done for concerned field.
My aim is to make an enhancement to overwrite standard calculation.
An easier way should be to reverse gross price and quantity directly inside SC (to not have difference betwen SC and PO quantities), but our customer does not want.
Do you have any idea ?
Regards.
Laurent.

Hello,
We used a workaround to answer to our customer's requirement.
We ceated two customer fields, one for net price and a second one for the quantity. Using metadata, we hid the two corresponding standard fields and displayed our CUF in SC.
Using BadI Change for SC, we populated standard fields with our CUF values (after having made inversion between quantity / net price).
Checks are done in BAdI to be sure our quantity CUF and price unit values are '1'.
As we use SC to create only PO as follow-on document, no other modifications are necessary.
Regards.
Laurent.

MB_MIGO_BADI - Line item data inside CHECK_ITEMS method

Hi All,
I have implement MB_MIGO_BADI and i want to put a check inside the method CHECK_ITEMS where the importing parameter is line ID.
How can I get the data for the line based on the line ID inside the check_items methods, so that I can make the custom checks inside the method and populate the error message.
Please let me know how can we access the line item data inside the method CHECK_ITEMS.
Thanks and Regards,
Vijay

Hi,
My requirement is to use BADI MB_MIGO_ITEM_BADI and restrict the creation of GR of items which have delivery date > PO Delivery date.
exact requirement is:-
Invoke Badi MB_MIGO_ITEM_BADI
Only for GR
Check EKKO-BSART =PJ where EKKO-BELNR = MSEG-EBELN
Check if the Po Line item has single or multiple delivery
a) If single
Check if MKPF-CPUDT-3 > EKPO-EEIND
Yes u2013 Create GR
No --- Give error message
b) Multiple Delivery
Check if EKET WEMNG =0
Select EKET-EINDT where EKET-WEMNG < EKET MENGE
Check EKET-EINDT < MKPF-CPUDT-3
Yes u2013 Create GR
No --- Give error message
Error Message : u201CGR Cannot be posted as Delivery date is in future u201C
Thanks
Vivek

Find item id inside folder

Hi,
How do I find item id inside one folder in content area is there a view ?

Docster wrote:
Hi All,
I'm a relative newbie to Apex. I'm trying to access a page in my app.
I have 4 main pages.
Widgets - primary page
Widget References - child page
Widget Contacts - child page
Widget Categories - child page
Each page alone works fine. From my Widgets page, I can access the Widget References page fine.
When I try to access the other two child pages, I get this error:
ERR-1002 Unable to find item ID for item " P17_WIDGET_TITLE_H" in application "12345".The error message shows that it's trying to find an item with a leading space: " P17_WIDGET_TITLE_H".
Unexpected error, unable to find item name at application or page level.
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: WWV_FLOW.FIND_ITEM_ID_ERR
error_backtrace:
----- PL/SQL Call Stack -----
object line object
handle number name
0x35b404e98 717 package body APEX_040100.WWV_FLOW_ERROR
0x35b404e98 1064 package body APEX_040100.WWV_FLOW_ERROR
0x358dd9de0 760 package body APEX_040100.WWV_FLOW
0x358dd9de0 4830 package body APEX_040100.WWV_FLOW
0x358dd9de0 7201 package body APEX_040100.WWV_FLOW
0x358dfd130 249 procedure APEX_040100.F
0x35ae40ce8 33 anonymous block
When I run the query:
select * from apex_application_page_items
where application_id = 12345
and page_id = 17
and item_name = 'P17_WIDGET_TITLE_H'
I get an ID.No leading space: 'P17_WIDGET_TITLE_H'
I have deleted the item and recreated it with every letter of the alphabet and still get the same error.
Oh, and the item is clearly visible on the page.
Do I have a poltergeist?No, it looks like you have a space in your links that shouldn't be there. You don't say how the pages are linked, but however they are, remove excess spaces from them.

VPN client cannot access inside hosts

Hello,
I have an ASA 5505 device with the attached configuration and my vpn clients can connect to it fine. Although, once a vpn client is connected they cannot RDP, ping, or telnet any internal hosts. The goal is to have a connected vpn client to have all access rights as anyone sitting on the internal network. Any assistance is greatly appreciated.
: Saved
ASA Version 7.2(3)
hostname Kappa-GW01
domain-name Kappa.com
enable password xxxxxxxxx encrypted
names
name 172.20.42.42 UMEFTP2 description UMAP FTP2
name 172.20.40.246 UMEMAIL1 description Exchange Server
name 172.20.41.3 UMERPS
name x.x.81.81 Wilkes
name x.x.84.41 KappaPittston
dns-guard
interface Ethernet0/0
shutdown
nameif outside
security-level 0
ip address x.x.148.194 255.255.255.248
interface Ethernet0/1
nameif Outside_Windstream
security-level 0
ip address x.x.205.210 255.255.255.240
interface Ethernet0/2
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd 7Tpgc2AiWGxbNjkj encrypted
boot system disk0:/asa723-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name Kappa.com
object-group network Blue_Bell_Internal_Networks
description Blue Bell internal network Group
network-object 192.168.100.0 255.255.255.0
network-object 10.0.0.0 255.255.255.0
network-object 10.0.1.0 255.255.255.0
network-object 10.0.2.0 255.255.255.0
object-group network VPN-Sites
network-object host Wilkes
network-object host KappaPittston
object-group network Michigan_VPN_GRP
network-object 172.20.40.0 255.255.252.0
object-group network ASA_OutSide_Vendors
description ASA OutSide Vendor Access
access-list 101 extended permit ip 10.0.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 10.0.1.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 10.0.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 172.20.40.0 255.255.252.0 192.168.100.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl remark Blue Bell Office
access-list KappaVPN_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl remark Williamston Office
access-list KappaVPN_splitTunnelAcl standard permit 172.20.40.0 255.255.252.0
access-list KappaVPN_splitTunnelAcl remark Pittston Office
access-list KappaVPN_splitTunnelAcl standard permit 10.0.10.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.30.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 172.20.40.0 255.255.252.0 inactive
access-list inside_nat0_outbound extended permit ip 10.0.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.10.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.30.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.30.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.100.0 255.255.255.0
access-list outside_2_cryptomap extended permit ip 10.0.0.0 255.255.255.0 172.20.48.0 255.255.252.0
access-list umeemp_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list umeemp_splitTunnelAcl standard permit 172.20.40.0 255.255.252.0
access-list umeemp_splitTunnelAcl standard permit 10.0.30.0 255.255.255.0
access-list umeemp_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0
access-list outside_5_cryptomap extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list 102 extended permit tcp any any eq 2000
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.220 eq smtp
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.220 eq pop3 inactive
access-list Outside_Winstream_access_in extended permit udp object-group VPN-Sites interface Outside_Windstream eq isakmp
access-list Outside_Winstream_access_in extended permit tcp object-group ASA_OutSide_Vendors host x.x.205.217 eq 4080
access-list Outside_Winstream_access_in remark SMTP Access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq smtp
access-list Outside_Winstream_access_in remark POP access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq pop3
access-list Outside_Winstream_access_in remark OWA Access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq https
access-list Outside_Winstream_access_in extended permit tcp host x.x.87.65 host x.x.205.218 eq 3389
access-list Outside_Winstream_access_in extended permit udp host x.x.56.111 eq ntp host x.x.205.216 eq ntp
access-list Outside_Winstream_access_in remark OWA UMAP
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.211 eq https
access-list Outside_Winstream_access_in remark JLAN
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.215 eq https
access-list Outside_Winstream_access_in remark UMERPS
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.212 eq https
access-list Outside_Winstream_access_in remark UMERPS
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.212 eq ssh
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.213 eq https
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.213 eq 5494
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.214 eq www
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.211 eq 8081
access-list Outside_Winstream_access_in extended permit icmp any any echo
access-list outside_6_cryptomap extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list outside_6_cryptomap extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_11 extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_10 extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_5 extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list Outside_Windstream_cryptomap_12 extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_2_cryptomap extended permit ip 10.0.0.0 255.255.255.0 172.20.48.0 255.255.252.0
access-list nonat extended permit ip any any inactive
pager lines 24
logging enable
logging asdm debugging
logging flash-bufferwrap
mtu outside 1500
mtu Outside_Windstream 1500
mtu inside 1500
mtu management 1500
ip local pool vpn-pool 192.168.100.100-192.168.100.200
no failover
monitor-interface outside
monitor-interface Outside_Windstream
monitor-interface inside
monitor-interface management
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
nat-control
global (Outside_Windstream) 1 x.x.205.216 netmask 255.0.0.0
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 172.20.40.0 255.255.252.0
nat (inside) 1 10.0.0.0 255.255.0.0
static (inside,Outside_Windstream) x.x.205.217 10.0.0.20 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.220 10.0.0.21 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.218 10.0.0.15 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.215 172.20.40.145 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.211 UMEMAIL1 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.212 UMERPS netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.213 172.20.40.243 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.214 172.20.40.146 netmask 255.255.255.255
access-group acl_inbound in interface outside
access-group Outside_Winstream_access_in in interface Outside_Windstream
route Outside_Windstream 0.0.0.0 0.0.0.0 x.x.205.209 1
route inside 172.20.40.0 255.255.252.0 10.0.0.3 1
route inside 10.0.30.0 255.255.255.0 10.0.0.254 1
route inside 10.0.1.0 255.255.255.0 10.0.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa-server BBPA-SRV-DC01 protocol radius
aaa-server BBPA-SRV-DC01 host 10.0.0.15
timeout 5
key G6G7#02bj!
aaa-server UMAP protocol radius
aaa-server UMAP host 172.20.40.245
timeout 5
key gfrt1a
aaa-server UMAP host 172.20.40.244
timeout 5
key gfrt1a
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
http 10.0.0.15 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 management
http 192.168.100.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_Windstream_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_Windstream_dyn_map 40 set pfs
crypto dynamic-map Outside_Windstream_dyn_map 40 set transform-set ESP-3DES-SHA
crypto map outside_map 5 match address outside_5_cryptomap
crypto map outside_map 5 set peer Wilkes
crypto map outside_map 5 set transform-set ESP-3DES-SHA
crypto map outside_map 10 match address outside_6_cryptomap
crypto map outside_map 10 set peer KappaPittston
crypto map outside_map 10 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto map Outside_Windstream_map 5 match address Outside_Windstream_cryptomap_5
crypto map Outside_Windstream_map 5 set peer Wilkes
crypto map Outside_Windstream_map 5 set transform-set ESP-3DES-SHA
crypto map Outside_Windstream_map 10 match address Outside_Windstream_cryptomap_10
crypto map Outside_Windstream_map 10 set peer KappaPittston
crypto map Outside_Windstream_map 10 set transform-set ESP-3DES-SHA
crypto map Outside_Windstream_map 65535 ipsec-isakmp dynamic Outside_Windstream_dyn_map
crypto map Outside_Windstream_map interface Outside_Windstream
crypto isakmp enable Outside_Windstream
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 3600
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 10.0.0.0 255.255.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
inspect skinny
inspect pptp
service-policy global_policy global
webvpn
enable Outside_Windstream
svc image disk0:/sslclient-win-1.1.4.177.pkg 1
svc enable
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
svc required
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy umeemp internal
group-policy umeemp attributes
dns-server value 172.20.40.245
vpn-filter none
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value KappaVPN_splitTunnelAcl
default-domain value umapinc.com
group-policy KappaVPN internal
group-policy KappaVPN attributes
wins-server value 10.0.0.15
dns-server value 10.0.0.15
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value umeemp_splitTunnelAcl
default-domain value kappa.loc
username gwadmin password AVjtEPq7nvtiAAk0 encrypted
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool vpn-pool
authentication-server-group BBPA-SRV-DC01
authorization-required
tunnel-group KappaVPN type ipsec-ra
tunnel-group KappaVPN general-attributes
address-pool vpn-pool
authentication-server-group BBPA-SRV-DC01
default-group-policy KappaVPN
tunnel-group KappaVPN ipsec-attributes
pre-shared-key *
tunnel-group x.x.131.62 type ipsec-l2l
tunnel-group x.x.131.62 ipsec-attributes
pre-shared-key *
tunnel-group x.x.232.2 type ipsec-l2l
tunnel-group x.x.232.2 ipsec-attributes
pre-shared-key *
tunnel-group x.x.49.114 type ipsec-l2l
tunnel-group x.x.49.114 ipsec-attributes
pre-shared-key *
tunnel-group x.x.226.218 type ipsec-l2l
tunnel-group x.x.226.218 ipsec-attributes
pre-shared-key *
tunnel-group x.x.116.133 type ipsec-l2l
tunnel-group x.x.116.133 ipsec-attributes
pre-shared-key *
tunnel-group x.x.21.36 type ipsec-l2l
tunnel-group x.x.21.36 ipsec-attributes
pre-shared-key *
tunnel-group umeemp type ipsec-ra
tunnel-group umeemp general-attributes
address-pool vpn-pool
authentication-server-group UMAP
default-group-policy umeemp
tunnel-group umeemp ipsec-attributes
pre-shared-key *
tunnel-group x.x.81.81 type ipsec-l2l
tunnel-group x.x.81.81 ipsec-attributes
pre-shared-key *
tunnel-group x.x.84.41 type ipsec-l2l
tunnel-group x.x.84.41 ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:xxxxxxxxxxxxxxxxxxxxx
: end
asdm image disk0:/asdm-523.bin
no asdm history enable

I'm sorry, I misunderstood what you were asking. Yes those three networks are on the inside of our ASA. we have 2 outside of the ASA (10.0.2.x, 10.0.10.x). When our clients vpn they connect to the x.x.205.210 ip address, which maps them depending on the preshared key that puts them on either the kappaVPN or the umeempVPN. (I am kind of new to configuring the ASA). When the cisco vpn client connects to the network, I checked the statistics and it lists all of our LAN networks under secure routes. I cannot ping anything inside the LAN nor can I connect RDP, telnet or anything.
Hope this answers your questions, just let me know if you need any more information.
-Rudy

Add field 'asset' in sales order line item account assignment tab

Hi,
I would like to add the following field: 'asset' in sales order line item account assignment tab.
I can enter order, or wbs, but not Asset.
How can I make this field visable?
Anybody?
thanks,
klundert
Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AM

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

BEDRATE field in Excise item , Excise duty tab in migo

Hi,
How the field BED rate is filled in Excise item , Excise duty tab in migo
I have JMOP= 10%, but it is showing 100, why??

thanks for reply,
I have taken the screens from PRD server,

In sales order item level billing tab

in sales order item level billing tab you have nine fields for payment terms
i want to know from where is the payment terms coming in the fields , i have checked that whatever payment term is there in SP/SH/PY they are not getting updated in the nine fields
can anyone tell wat is the possible ways to fill these tabs

Hi,
Payment terms are coming from Customer Master on Sales order , I did checked by removing the payment terms from customer master and created the sales order were it has not defaulted. Updated the Customer Master with Payment Terms and created the sales order now Payment terms got defaulted.
Regards
Raj

How to insert more items for each tab in WAD 7.0

Hello to everyone,
My problem is confined to the WAD 7.0
I would like to insert 4 different queries into a new Web Template.
Two of them have to stay in one page and the others in one page each; therefore, the result would be a Web Template with three tabs.
Unfortunately the system creates automatically four different tabs with one query each.
Anybody knows how to insert more items in one page/tab?
Thank you very much
Savino Pompa

Hi Savino
In the WAD bring up the properites of the tabstrip_container web item, under the Internal Display group in the Tab Panel List, create 3 tabs, then drag 3 contatiner_layout web items into the tab web item.
In each conatiner item drag the analysis web item, 2 in the first container, then 1 each for the others, then point each analysis web item at a dataprovider(query).
Setup the contatiners so that the analysis items displays, to do this in the container properties create a row then on the following screen a column and then set the Subordinate web item to the analysis item, these web items control layout and are useful for dealing with multiple web items, for the first tab with 2 queries you will need to play with the layout, either 1 row 2 column or 2 row 1 column.
For each tab you created add the corresponding contatiner as the Subordinate Web Item in the Tab Panel parameters for each tab.
Hope this helps
Josh

Controls in ITEM and LIST tabs of Ribbon disabled always in Punishing SharePoint 2013 site if i add list to home page as List View Webpart

Hi,
Below is the scenario,
If i created any custom list and navigating to the list (AllItems.aspx) and on selecting the item, i can see controls in ITEM and LIST tabs of Ribbon are enabled in SharePoint 2013 publishing site.
If i add the same list in the home page (add web part --> select list view webpart) in the publishing site, on selecting of item, all controls in ITEM and LIST tabs of Ribbon are disabled always.
Please help me to fix this issue ASAP.
Regards,
Krishna

Hi,
Thanks for your reply.
Ribbon controls (only ITEM and LIST tab) still in disabled mode even if i selected the item in the list view webpart.
Also, i have noticed the below things,
when i create a published site (default page : default.aspx) and add the list view webpart in the default page, the controls are in disabled mode on selecting item in list view webpart.
when i create a team site (default page : home.aspx) and add the list view webpart in the default page, the controls are in enable mode on selecting item in list view webpart.
Please help me on this.
Regards,
Krishna

How to pass the page item data from tabA to TabB of a discoverer report

I have a discoverer repoort, it is master_detail (Dept-Emp) report
TabA is a master worksheet, which has a page item Deptno
(the data is from a customized query)
TabB is detail report which has a Deptno as the page item
which show the emp detail info on this deptno
(the date is from another customized query).
What I want to do is;
When I change the Deptno in TabA, TabB should automatically change to the deptno of Tab A when I click TabB.
How can I pass the page item deptno from TabA to page item of TabB?
Thanks for your help

Hi.
You are absolutely right, you cannot create a link from Page Item.
My Idea was (and I'm sorry taht I didn't mention it at the beginning) to create one link for each and every column in the report in the TabA.
All these links would be exactly same and pass the Deptno to the TabB.
So the end user can click wherever he wants (all cells on the worksheets have the link to the TabB) and he is always redirected to the TabB with the Department parameter seted to Deptno Page Item from TabA.
As I already said before, it is not exactly what you expected, but it's probably the best you can get out of Plus.
Jakub

Access Restriction tab is missing on e3000 web interface

I am quite sure that this tab has been there before but now its missing - could it be because I have activated Parent Control on Cisco Connect ?
If so - how do I 'get It back'
(I thing parent control in Cisco connect is too limited)
Regards
Fleohans
Solved!
Go to Solution.

Yes, the Access Restrictions tab goes away when the Parental Controls section is activated. According to the faqs, a hard reset is the only way to restore it.

In VA01 Item detail screen tab Account assignment field Internal order ???

Dear Experts,
In T.code VA01
item level data tab Account assignment there is field internal order , here if i created internal order that internal order should come automatically into that field
e.g. i have one article / material for that i created one internal order where i put all expenses through T.code FB50 and i want to add sales revenue for that while creation of sale order i am putting internal order manually in T.code VA01
so my question is the same task can be possible automatically or not
i have two thoughts
1) either that internal order should assign to article or material master data or
2) status profile has some link with internal order type (so by default link with internal order ) and there is provision in T.code VOV8 and VOV7 we can add status profile .
Question
IS IT POSSIBLE INTERNAL ORDER SHOULD COME AUTOMATICALLY IN SALES ORDER ITEM DATA ACCOUNT ASSIGNMENT TAB AS PER ARTICLE / MATERIAL
PLEASE GUIDE

Hi Ravi,
it is due to profit centre accounting / costing is active, it is better to get it clearified from a FICO consultant
regards,
Santosh

Wrong Gross Weight for Material in Sales Order at Item Level (Shipping Tab)

Dear All,
Except MMR, where we maintain gross weight for material?
Or, from where Gross weight gets detrmined in Sales Order at item level (Shipping Tab)?
Details,
I've 2 Materials in Sales Order, Mat1 and Mat2.
In both the MMRs, Gross weight is 1.080 Kg
In sales Order Mat1 has Qty 18,000 Kg and gross weight is 19,440 Kg --> which is right.
Mat2 has Qty 2,160 Kg and gross weight is 2,332,800 Kg --> which is wrong.
I tried with maintaing another line item with Mat2 in Sales Order, for which again wrong gross weight is calculated.
I also tried with creating another Sales Order with Mat2, and again the same problem.
Thanks for your help, in advance.
Regds,
Yogi.

Hi,
Thanks. That has already been checked by me, in Basic data1 --> Additional Data --> Unit of measurements
everything is maintained correctly.
What I have noticed is:
Instead of obtaining Gross weight as 1.080 (which is maintained), somehow system is picking 1,080 (don't know why and from where)?
Regds,
yogi

How to insert more t then one web item into single tab in WAD

Hi Gurus , How can i insert one Chart , table and dropdown item into same tab in wad
Please advice
TQ
BR

Hi,
Currently it is not possible to assign more than one item to a tab. But you can use a container item and place several items in this container item. Afterwards you assign the container to one tab.
Best regards,
Janine

Item access inside tab

Similar Messages

Maybe you are looking for