Item category is set as Credit active - but credit master is not updated

Dear Gurus,
I am having an item category to which the credit active indicator is checked.
For my sales document type - we have set Automatic credit check (Static/Dynamic).
But, if I create a sale order with this item category - it is not updating the credit master sheet.
Whereas, if I change the credit check control settings assigned to sales documents type to SIMPLE CREDIT CHECK - it is updating the credit master sheet.
Could you please let know - why the system is not updating the credit master sheet if the AUTOMATIC CREDIT CHECK is set to the sales document type?
Please clarify.
Thank you,
Venkatesh

Hi
Kindly check the below
1.Check the risk category in the t coded FD32
2. Check the t code OVA8 for the combination of credit control area risk category credit groupo
3. check the sub total "A" maintained against the condition type in the pricing procedure
4. check the tcode OVAD
Regards
Damu

Similar Messages

My account is in usa but I want to enter an international credit card, but the form does not allow me. How do I have to proceed

My account is in usa but I want to enter an international credit card, but the form does not allow me. How do I have to proceed

chi45,
You must have your iTunes and App Stores set to the same country that your billing information is based in (i.e.: must use a US credit card in US iTunes and App Stores).
If you move to another country, you need to change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account. Otherwise, your credit card might not work as payment. For example, only German credit cards can be used to buy content from the German iTunes and App stores.
Can't change the country of your iTunes Store, App Store, iBooks Store, or Mac App Store account
https://support.apple.com/en-us/HT204447
Cheers,
Allen

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

I update my credit card but the paymaent has not been debiteded yet

I update my credit card but the paymaent has not been debiteded yet, what do I need to do?

This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

TS2621 I did set up my email on my iphone, but i deleted the account. I tried to set it back up but my iphone will not send or receive emails.

I did set up my email on my iphone, but i deleted the account. I tried to set it back up but my iphone will not send or receive emails with the new setup.
I started again 3 times...already!!
Tom

Its OK I gave up and turned off my iphone and turned back on and its OK now.

Sharepoint 2013 Active Directory Import- Manager field not updating

Hi,
SharePoint 2013 Active directory import -Manager field not updating
Concern/Issue-
We are using SharePoint and configured the Active Directory Import .First import it seems everything is working fine and OOB Organization chart built using User profile data is coming out right.
Now the user is moved from one Organization Unit to Another.
Now our Manager field is not Updating .There is change in AD manager attribute but not reflecting in the SharePoint User profile.
Manger field is mapped to "manager" attribute in SharePoint.
We tried removing the user and Re-Import using Incremental import but no luck.
Thanks for help in advance
Sachin

Moving a user from one OU to another in AD won't normally change the Manager attribute in AD. You would need to edit the user's organization settings to change the manager value in AD. I've also seen these changes not be picked up unless something
other than just the manager field in AD changing. Try changing something like Office location and see if the manager change is picked up by AD Import.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

My i pad is not responding. I have a security copy in my iTunes. But my iTunes is not updated

My i pad is not responding. I have a security copy in my iTunes. But my iTunes is not updated. Will i lose my Security copy?

I have an iPad 1 as well that I updated when the iOS was first released a few weeks ago and I think that the new update really sparked my iPad into "new life" again. It's so hard to tell what will happen when you update - ideally the performance of the device should improve - and not fall off.
Have you tried closing any/all open/running apps in the recents tray? Close them all and restart - see what happens.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I have os x 10.7.4 but somehow safari was not updated to 6.0 - safari won't run

I have os x 10.7.4 but somehow safari was not updated to 6.0 - safari won't run
Can I install safari only? Or need to install os x 10.7.4 again ??

Try this link:
http://www.macupdate.com/app/mac/15675/apple-safari/

I signed for a year last week, the payment was confirmed, but my accout was not updated. How should i proceed?

I signed for a year last week, the payment was confirmed, but my accout was not updated. How should i proceed?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

HT1911 I have changed my apple ID but the phone has not updated I cant see how to change my ID

I have changed my apple ID but the phone has not updated and I cant see how to change it

You can log out of your account on the iPhone by tapping on your id in Settings > Store and you can then log back in with the updated version - if you created a new account as opposed to updating the existing account then your current content will remain tied to the old account and it can't be copied or transferred to the new one.

SC Item in Transfer process active - follow on document status not updated

Hi Gurus,
    Follow on document is not updated in SRM after PO creation. Ours is classic scenario (SRM 5.5, ECC6.0) and passed thru the following steps - SC (FFT) created, document approved, sent to SoCo, purchaser assigned vendor and created PO, PO created in ECC.
In SRM SoCo screen displays message 'PO created 45xxxxxxxxxx' successfully. Checked the BE PO 45xxxxxxx that was created successfully.
Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP jobs. jobs finished successfully. But status is not updated in SRM. RZ20/SLG1 does not have any errors.
BBP_PD shows following statuses:
     I105   Awaiting Approval         X
     I1021 Created
     I1038 Complete
     I1106 SC ordered
     I1129 Approved
     I1111 Item in Transfer process
                    The last status I1111 is still active.
Any advise are welcome. Not sure if I am missing any OSS Notes.
Regards
Viktor Paul

Hi,
1. Check in table BBP_DOCUMENT_TAB if the entry exists use CLEAN_REQREQ_UP program.
2. If entry in the table not exists then check in transaction BBP_PD if the follow on document ( PO ) Number reserved for
the SC .. then use FM BBP_PD_SC_RESUBMIT.
3. none of these use normal process execute BBP_REQREQ_TRANSFER And then use CLEAN_REQREQ_UP
Thanks,
prasad.s

Icloud is set up on mac but the calendar is not pushing to iphone

I recently updated to Mountain Lion. I have set up iCloud on my Mac but for some reason, my calendar is not updating on my iPhone or iPad. I am pretty sure that I have set up iCloud correctly on each of the devices. Does anyone have any suggestions?
Thanks.

Who's email are you using?

Custom HTML Master Page not updating when activating Feature via PowerShell

I created a WSP to deploy a HTML Master Page. I later have code that will publish this Master Page to create a .master, but I stripped this out just to simplify things. My issue is with the first step - getting the HTML Master Page file to
update by activating the feature using PowerShell. I don't understand why it's not working - I'm not even using this Master Page currently. Plus, oddly the master page does update if I go into the UI and deactivate/activate my feature.
I can easily reproduce this problem using the following steps:
1. Created a SharePoint Empty Project named SharePointProject1
2. Added a Module named Module1
3. Added a HTML Master Page called MyMaster.html and updated the elements.xml file for the Module1 with the following:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="Module1" Url="_catalogs/masterPage/Test">
    <File Path="Module1\MyMaster.html" Url="MyMaster.html" ReplaceContent="TRUE" Level="Published" Type="GhostableInLibrary">
      <Property Name="Title" Value="My Master Page" />
      <Property Name="MasterPageDescription" Value="My Master Page" />
      <Property Name="UIVersion" Value=";#15;#" />
      <Property Name="HtmlDesignAssociated" Value="TRUE" />
      <Property Name="ContentType" Value="Html Master Page" />
    </File>
</Module>
</Elements>
4. Deployed the WSP and activated the Feature containing Module1
5. Updated the HTML Master Page
6. Re-deployed the WSP
7. Deactivated the feature and Reactivated the feature using PowerShell
     => _catalogs/masterpage/test folder still has OLD file - Why??
    $deployFeatureId = "575ec423-1b20-404c-8b2c-d160426c53e7"
    Disable-SPFeature -Identity $deployFeatureId -Url
http://sp2013local -confirm:$false
    Enable-SPFeature -Identity $deployFeatureId -Url
http://sp2013local
8. Deactivated the feature and Reactivated the feature through UI
     => _catalogs/masterpage/test folder now has the correct file
I even added event receiver code to delete the HTML file on deactivation but that still didn't work.

Hi Sagar,
The second link isn't applicable for me because I'm not setting the Master Page for the site collection just yet. I'm just trying to get the version to be correct in the master page library first.
For the first link, I am trying to publish a Master Page, not a Page Layout. I did try adding some similar code that I found from this article,
http://www.eliostruyf.com/provision-your-html-designs-master-pages-page-layouts-to-sharepoint-2013/
but the same result. PowerShell is still copying an old version of the file to the Master Page Gallery, but the activating/deactivating the feature in the UI works fine.
Here is my code:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Module Name="Module1" Url="_catalogs/masterPage/Test">
    <File Path="Module1\MyMaster.html" Url="MyMaster.html" ReplaceContent="TRUE" Level="Draft" Type="GhostableInLibrary">
    </File>
</Module>
</Elements>
    public class Feature1EventReceiver : SPFeatureReceiver
        public override void FeatureActivated(SPFeatureReceiverProperties properties)
            SPSite site = (SPSite)properties.Feature.Parent;
            PublishMasterPage(site, "/_catalogs/masterpage/Test/MyMaster.html");
        public void PublishMasterPage(SPSite site, string filePath)
            SPFile file = site.RootWeb.GetFile(filePath);
            if (file.CheckOutType != SPFile.SPCheckOutType.None)
                file.Item.Update();
            else
                file.CheckOut();
                file.Item.Update();
            file.CheckIn("Checked in by the branding deploy feature", SPCheckinType.MajorCheckIn);
            if (file.DocumentLibrary.EnableModeration)
                file.Approve("Approved by the branding deploy feature");

I just finished the 30 day trial and bought the monthly student membership but my programs are not updating and it still wont let me use them. How do I fix this?

Hi there,
I just finished with my 30 day trial and then purchased the monthly student membership. My payment went through but I am still not able to open my apps for creative cloud. I really need this fixed as I am in the middle of doing a school project. If anyone can help that would be great!
Thank you,
Kayla

Hi Kayla, Kindly try to sign out and sigin back in to Creative Cloud. Please follow the below mentioned link for more info and troubleshooting further.
https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks,
Atul Saini

Payment proposal is blocking but block key is not updating in Invoice

Hi All,
While doing F110 Automatic payment program In the proposal run I am blocking some invoices. Block key is accepting in payment proposal run. but The block key is not updated in the Invoice display document (FB02).
For where I have to do the configuration setting for this.
Please do me the needful.
Regards,
Sreekanth Lokaray

HI,
Go To t.Code OB21 path: Financial Accounting (New)>Accounts Receivable and Accounts Payable>Customer Accounts>Preparations for Creating Customer Master Data>Define Screen Layout per Company Code (Customers) and click on Define Screen Layout per Company Code (Customers) and double click on company code and double click on Payment transactions and Payment methodsSuppress Req. Entry -- Opt. entry ---Display
Go To t.Code OB24 Financial Accounting (New)>Accounts Receivable and Accounts Payable>Vendor Accounts>Master DataPreparations for Creating Vendor Master Data>Define Screen Layout per Company Code (Vendors) ouble click on company code and double click on Payment transactions and Payment methodsSuppress Req. Entry -- Opt. entry ---Display
Thanks,
Raviteja

Item category is set as Credit active - but credit master is not updated

Similar Messages

Maybe you are looking for