Item not received from boardwalk buy

I purchased an item on 6/21/15 from boardwalk buy. Had not received the item after three weeks, I contacted them and they replied on back order. I still have not received the item as of today 8/7/15. Have emailed them and have had no response. I received a certification no. from buy/safe. Is there anyway for me to get my money back. Am I protected by pay pal.

File a dispute for non receipt of item via "resolve a problem in the resolution centre" link lower left of your paypal summary page. Give them a few days to get the item to you OR refund you and if not escalate the dispute to a claim for paypal to review. DO NOT close the dispute until you have a CLEARED refund or the item. ********************************** I give up my time to help you so a thank you or kudos would be cool.
Marking one of my replies as a solution would be appreciated if I sorted your problem.

Similar Messages

How can I transfer my contacts, calendar items, notes etc. from one apple-id to another?

I moved from DK to the US and now I have created a US-apple-ID. How do I transfer all my contacts, calendar items, notes etc. from my DK-apple-ID to my new US-apple-ID?

Hey kristina rivera!
You will first want to export your contacts from iCloud using the following article:
iCloud: Export contact information as a vCard
http://support.apple.com/kb/PH3606
You will then want to log in to her iCloud account, then import the vCard file that had been exported from your iCloud account:
iCloud: Import a vCard
http://support.apple.com/kb/PH3605
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Aironet 1600 - A response was not received from the router or access point

Hi,
I'm trying to set up a wireless network with multiple SSID's. The new network only has CISCO products (router, switches). For the moment I'm trying to connect to 1 SSID (Windekind.Gast). the SSID is visible but when connecting devices have te folowing error message in the log:
Connection status summary
Connection started at: 2015-02-17 09:55:49-951
Profile match: Success
Pre-Association: Success
Association: Fail
Security and Authentication: Not started
Root cause:
Wireless association to "Windekind.Gast" failed
A response was not received from the router or access point.
Detailed root cause:
Wireless association to this network failed. Windows did not receive any response from the wireless router or accesspoint.
The signal is perfect (I'm only a few feet away from the AP).
To make sure there is no dhcp problem I tested the swich port in access mode for vlan 30 which supplied an IP correctly. I'm really not seeing the problem and searched the web for days now! Any help would be very much appreciated!
Below the config of the access point (done via de web interface).
! Last configuration change at 05:30:28 UTC Mon Mar 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
vlan 50
band-select
authentication open
mobility network-id 50
dot11 ssid Windekind.Gast
vlan 30
band-select
authentication open
authentication key-management wpa version 2
mbssid guest-mode
mobility network-id 30
wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
vlan 40
band-select
mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2452
no preamble-short
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end

Hi Rasika
thanks for the reply! 10.0.0.81 belongs to vlan 1. I changed the config as suggested but no luck.. (same problems are logged in the event viewer). the ap is connected to a switchport in trunk mode and vlan 1 is the native lan (untagged). the port also is joined to vlan 30 (and others).
Below the new config. Hope you can see an error..
! Last configuration change at 22:56:10 UTC Thu Apr 1 1993
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname AP002-C
logging rate-limit console 9
enable secret 5 $1$Bxv3$Of8o5..8v6gzIiAe2tXlh/
no aaa new-model
no ip cef
dot11 syslog
dot11 vlan-name Default vlan 1
dot11 vlan-name Windekind.Directie vlan 50
dot11 vlan-name Windekind.Gast vlan 30
dot11 vlan-name Windekind.Klasnet vlan 40
dot11 ssid Windekind.Directie
   vlan 50
   band-select
   authentication open
   mobility network-id 50
dot11 ssid Windekind.Gast
   vlan 30
   band-select
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   mobility network-id 30
   wpa-psk ascii 7 14201B05080121222A2C6A6D63
dot11 ssid Windekind.Klasnet
   vlan 40
   band-select
   mobility network-id 40
crypto pki token default removal timeout 0
username Cisco password 7 112A1016141D
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 2
stbc
beamform ofdm
mbssid
speed basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
no preamble-short
channel 2452
station-role root
payload-encapsulation dot1h
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 30 mode ciphers aes-ccm tkip
ssid Windekind.Directie
ssid Windekind.Gast
ssid Windekind.Klasnet
antenna gain 4
no dfs band block
stbc
beamform ofdm
mbssid
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel dfs
station-role root
payload-encapsulation dot1h
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 spanning-disabled
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
interface Dot11Radio1.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 subscriber-loop-control
bridge-group 40 spanning-disabled
bridge-group 40 block-unknown-source
no bridge-group 40 source-learning
no bridge-group 40 unicast-flooding
interface Dot11Radio1.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 subscriber-loop-control
bridge-group 50 spanning-disabled
bridge-group 50 block-unknown-source
no bridge-group 50 source-learning
no bridge-group 50 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 spanning-disabled
no bridge-group 30 source-learning
interface GigabitEthernet0.40
encapsulation dot1Q 40
no ip route-cache
bridge-group 40
bridge-group 40 spanning-disabled
no bridge-group 40 source-learning
interface GigabitEthernet0.50
encapsulation dot1Q 50
no ip route-cache
bridge-group 50
bridge-group 50 spanning-disabled
no bridge-group 50 source-learning
interface BVI1
ip address 10.0.0.81 255.255.255.0
no ip route-cache
ip default-gateway 10.0.0.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging facility user
bridge 1 route ip
line con 0
line vty 0 4
login local
transport input all
end
t

Not receiving request to buy notifications

my son submits a request to buy on his iPod touch and I never receive the notification on my iMac. However if my daughter submits a request to buy on her iPod touch I receive her notifications almost instantly.

I am having the same problem with one of my kids but not the other one.
The kid that I am not receiving 'ask to buy' notifications has a credit card on their id and an iTunes credit.
I am still trying to work out how to remove the credit card off the kids apple id but even so, does anyone know if they have a credit on their apple id should the organise still get an 'ask to buy' notification?
Otherwise how do I ensure (i.e. control) her purchasing 'age appropriate' apps etc

Not receiving texts after buying iPad

Hi
After buying an iPad my incoming texts kept going to the iPad. I turned iMessage off the iPad as it's at home in use by other family members when I'm out. I then stopped receiving texts or the texts I did receive had removed the contacts name and left the number so I had no idea who they were from. After reading your forum I turned I message back on the iPad, still no texts and the missing texts not showing. I'm not sure what to do next, shall I just disable I message from both iPhone and iPad and not bother with it? I don't want messages going to my iPad only my phone.
This is causing issues as I receive texts regarding work and arrived at work to a huge issue I had no idea about due to not receiving the texts the night before. Suggestions would be much appreciated
Thanks

Hello Marry mini,
Thank you for the details of the issue you are experiencing with iMessage on your iPad and iPhone.
It sounds like you prefer not to receive messages on your iPad, so I recommend leaving iMessage off in Settings > Messages on the iPad.
iPad User Guide - Messages settings
http://help.apple.com/ipad/7/#/iPad99acb5bb
Next, I recommend the following steps to troubleshoot iMessage on your iPhone:
To resolve issues with sending and receiving iMessages, follow these steps first
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Additionally, you mentioned your contacts' names are missing. You may want to check in Settings > iCloud and verify that you are signed into iCloud and have Contacts enabled there:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Thank you for using Apple Support Communities.
Best,
Sheila M.

Mail not received from Apple

I recently tried to obtain an Aperture serial number and through the process found out that I am not receiving emails from Apple. With an Apple tech support's help, was able to get her basic email but one with any links in the body of the message, would not come through. Strip the links and it comes in fine. Other emails from normal senders come in fine, with links, attachments, etc.
Any ideas on a solution?
Thanks.

You are not addressing Apple here. We are all just users like yourself. It's not a good idea to post your private email on a public forum.

Email receipt not received from Apple Store.

Before Christmas, I bought a Macbook Pro from Apple Store in Chicago but have not received the receipt by email as promised. I'm not in Chicago anymore so I can't go back to the store. Can anyone suggest how to get a receipt?
Thanks

Assuming you've checked any spam filters to make sure the email wasn't trapped, all I can suggest is for you to call them and ask for the receipt to be resent.
Regards.

Credit not received from internet banking top up

i topped up through my ptsb account online last night at 12am and as of now 8.55pm I still have not received the credit even tho the money left my account straight away I received a text from my bank to say it was being processed and i have waited all day for it to come and I missed my price plan deadline I'm pretty annoyed as I haven't been able to make a call or text all day!!!

Hi there Kim1982
Do you mind sending me a PM with your email address you used to send this email please?
Once I get this, I will follow up with that department on your behalf
-Kyle

SMS Server not receiving from SMSC

Using the gateway configuration file that comes with
Colfusion 8, I re-configured the file to read as it is now
(attached). Unfortunately when test is sent to my phone number, it
is not received for processing in Coldfusion. I downloaded nowSMS
and set it up as well. The NowSMS server is receiving alright. So I
am wondering what is up with the Coldfusion SMS Server and Secondly
how would I be able to make Coldfusion work with the nowSMS server?
# SMSGateway configuration file
# Test server config
# This is the IP address of SMSC
ip-address=190.4.64.43
# Port to bind to
port=7710
# Your system id
system-id=test
# Your password
password=testSMS
# The source address for this client
source-ton=1
source-npi=1
# This is a made-up address
source-address=00447700081736
# The address range this smpp client will serve
# Generally the same as your source address
addr-ton=1
addr-npi=1
address-range=00447700081736
# Message sending rate; how many messages per second is the
# gateway allowed to send to your service provider.
# This can be a decimal (i.e. 0.1). 0 is unlimited.
# The default is 100 messages per second.
message-rate=100.0
# The mode of the gateway; Either synchronous or asynchronous
# In synchronous mode the gateway will wait for the response
# from the server when sending a message and the
SendGatewayMessage()
# CFML function will return the SMS messageID of the message
# or an empty string if their is an error. In asynchronous
mode,
# the gateway will not wait for a response and the SMS
messageID
# will NOT be returned from SendGatewayMessage().
# The default is synchronous.
mode=synchronous
# Should the gateway retry delivery on Network Errors?
# If a network error occurs while trying to deliver a
message,
# should the message be queued for delivery when the gateway
# is able to re-bind to the SMSC. This is useful if the
gateway
# is in asynchronous mode, where no error status is returned
from
# the CFML SendGatewayMessage() function.
# The default is no.
network-retry=no
# Should the gateway retry delievery on Transient Errors?
# If an error is returned from the SMSC that indicates
# the message may be able to be delivered in the future,
# should the gateway attemp to resend send the message?
# This is useful if the gateway is in asynchronous mode,
# where no error status is returned from the CFML
# SendGatewayMessage() function.
# The default is no.
transient-retry=no
# Everything below here is usually OK.
# The function in the Gateway CFC which the is called
# when an incoming message arrives.
cfc-method=onIncomingMessage
# The default destination address info
destination-ton=1
destination-npi=1
# You can't have a default destination
# destination-address=
# The service type can be empty or one of
# the following values:
# CMT, CPT, VMN, VMA, WAP or USSD
# service-type=
# From the spec:
# Identifies the type of system requesting the bind.
# This may enable SMSC responses which are
# particular to a given type of ESME.
system-type=SMPP
# The receive timeout is a timeout for trying to receive a
message
# from the SMSC. If you want go to infinite wait until a PDU
# is received, set the receive-timeout to -1.
# The value is in seconds. The default is 30 seconds.
receive-timeout=10
# The ping interval is how often the SMS Gateway will send an
# EnquireLink PDU to the server to verify the health of the
connection.
# The value is in seconds. The default is 60 seconds.
ping-interval=60
# The number of connection attempts the gateway will make
until it gives up.
# Use -1 to retry until connected. The default is -1 (try
forever).
retries=-1
# Connection retry interval; how long to wait between
connection attemps.
# The value is in seconds. The default is 10 seconds.
retry-interval=10

Why don't you just use Coldfusion's built-in gateway,
together with the SMS client simulator. The simulator is at
{CF_HOME}/bin/SMSClient.bat

SQL 2012 DB Engine [Login failed: Account locked out] alerts not received from SCOM 2007 R2

Dear Experts,
In our SCOM 2007 R2 environment SQL 2012 DB Engine [Login failed: Account locked out] alerts not received but we are receiving the following alerts fr the DB instance.
1. Database Backup Failed To Complete
2. Login failed: Password expired
3. Log Backup Failed to Complete
4. Login failed: Password cannot be used at this time
5. Login failed: Password must be changed
6. IS Package Failed.
Why we are not receiving the "Login failed: Account locked out" ? Customers are asking the notification email alert for this Rule even I have checked the override settings everything is enabled by default same as above rules.
What can be the issue here ?
Thanks,
Saravana
Saravana Raja

Hi,
Could you please check the Windows security log for (MSSQLSERVER) event ID 18486? The rule should rely on this event.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

HT201359 Billed for item not received/double billed for single item

Angry Birds Rio, Small Bundle of TNT Drops
Report a Problem
Rovio Entertainment Ltd
In-App Purchase
$1.99
Angry Birds Rio, Small Bundle of TNT Drops
Report a Problem
Rovio Entertainment Ltd
In-App Purchase
$1.99
Subtotal:
$3.98
Tax:
$0.24
Order Total:
$4.22
I was charged twice for one item. I purchased and received one same bundle of TNT drops. I am seeking a refund of $2.11.
Thank you.
Antonio Thompson

Welcome to the Apple Community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.

Gift voucher not received from education store

Hey,
I ordered a macbook air 13" via the education store, which meant I was meant to receive a £70 voucher for the app/itunes store with it. However, it did not arrive with my order and I was wondering whether I have missed something, or what should I do now?
Thanks!

was the voucher included in the invoice and just missing from the order?
*Buy a qualifying Mac and receive a £70 App Store Gift Card, or buy a qualifying iPad or iPhone and receive a £35 App Store Gift Card. The Mac, iPad or iPhone must be purchased from Apple from 2 July, 2013, until 6 September, 2013. iPhone eligibility may vary by model. Purchaser must be eligible for Apple Education Individual Pricing. Quantity limits may apply. The App Store Gift Card may be used on the Mac App Store, the iTunes Store, the App Store and the iBookstore. If the Mac, iPhone or iPad is returned, your refund may be reduced by the full amount of the App Store Gift Card. Terms and conditions apply. Visit www.apple.com/uk/backtoschool for full details. The Mac App Store, the iTunes Store, the App Store, and the iBookstore are available only to persons age 13 or older in the U.S. and other countries. Terms apply. See www.apple.com/legal/itunes/uk/terms.html for more information.
Contact sales support:
United Kingdom
Start your support request online and we'll connect you to an expert.
(44) 0844 209 0611***
www.apple.com/uk/support/

Account assignment for service item not copied from PR in PO

Hi,
We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
Please let me know if someone has faced a similar issue
Thanks,
Lakshmi

Hi,
Please check first if notes 1085214 and 1102653
could solve the issue.
Regards,
Edit

Item not populating from CCM into shopping

Hi Gurus,
The Excel file has been uploaded and published successfully into CCM but when the only one line is not getting populated when that item is used in the shopping function the source of supply box is blank and has to be manually populated. Early solution will be rewarded pl.
Regards,
Raj

Hi,
The field Supplier will be automatically carried to the procurement catalog from the Supplier Catalog, you should ensure the Supplier is a valid vendor in SRM - you can check this by implementing the coding from note 487917 and checking the OCI data in SLG1 for object BCT1.
Regards,
Jason

Items not copied from PR to PO

Hi
thirdparty order was created for 5 different items, same PR was created for all the items. But when user tried to create PO from the given PR system copied only 4 materials and not copied the 5th lineitem.. any possible reasons?
Reg
Shan1242

Hi,
check 4 th item is release or not if u have release procedure at item level
shakir
Edited by: Shakir on Jan 28, 2008 10:02 PM

Item not received from boardwalk buy

Similar Messages

Maybe you are looking for