Items not shown  in Periodic Cost Update form

Hi,
I'm working with Periodic Average Cost, for a Colombia project. Instance is still in 11.5.10.2.
The issue I have is that when I try to select an item to update periodic cost, the item is not retrieve from LOV. In the form the corresponding LE / Cost Group / Cost Type. Cost Group is associated to the Item Master Org.
After checking, the LOV for items is not showing all my IMO items nor my IO items. It's showing the items for another IO (UK) which happens to be the IO #1 created after IMO
The OU has its own IO under Standard Cost and the IO depends from IMO. The responsibility has profiles for correct SOB and OU.
Does anyone know if there is any profile or setup used byt this form to deafult items' org? As it;s so far it seems we are missing a setup, but there is no reference in Metalink on similar issues
Thanks in advance,
Gerry

Good day uzma
abidi
It has been long time since I used Webforms but it look to me like you are using the default options and if there is no data that return in the query then you will not see the PagerTemplate.
1. execute the SP from the SSMS.
2. make sure that you pass the correct @status while executing the SP from the ASPX.
3. check the SQL Server profiler, what query the SQL Server got.
4. Check if DataTable (dt) has data after filling it. else you do not get the "DataBind" part, and the PagerTemplate will not display.
* The basic code look ok in fast review. I might missed something. You should monitor it and get the line that make the issue.
  Ronen Ariely
 [Personal Site]    [Blog]    [Facebook]

Similar Messages

  • How can I display the 11000+ "items not shown?"

    I have Elements 7 and running Windows 7 64bit. "Show all" only shows a couple of thousand photos and 11000+ "items not shown."  I have never stacked or hidden any photos.  I've tried everything.  The "show hidden" gives me 0 photos.  When I ask to show a tag of some of the missing photos, I again get 0. The photos are not shown in any of the views.  When I try to reimport the photos, it says they are already there. I need help desperately. I've put too much work into this organizer to start from scratch.

    Thanks for the reply and the terrific FAQ source.  I followed the directions suggested, but things actually got worse.  When I tried display all, I got 0 photos - nada - zip.  I kept messing around and finally success.  I tried so many combinations of things that I'm not sure which actually solved the problem, but I believe it was reconnect all.  I had tried this a couple of times before without success, but this time I deleted from the catalog all items elements couldn't find, even though I knew where they were.  Lo and behold all 13000 photos appeared.  BTW many of those are duplicates.

  • At bottom of screen '36 items not shown" comes and goes??

    Thanks is advance for your help.
    At the bottom of the Organizer screens it always says "972 items dated etc". But then depending on something I do, possibly with tags, it sometimes shows "36 items not shown"  for a total of 1008.   Note the View does not show any hidden files.  One thing I noticed is when I put just one photo in an album and click on the album it will say "1 item found 1007 items not found for a total of 1008.
    What concerns me most is that I have 36 photos floating around somewhere that I can't see.

    Thanks Brett; However, the View hidden files and edit visibility seem to be the exact same settings?   Are you referring to anything else when you mention the "hidden" attribute are you referring to anything else. The only choices oh both are to:  Show all files, show hidden files and hide hidden files. None of these choices including show all files seem to show all the files. Any other suggestions would be helpful.  Thanks much

  • Wizard not shown in model after update to SP5

    Hi,
    I updated the CE to SP5. I have a VC model with a wizard control and when I open it now I get an internal error with the following message:
    ERROR: Failed to instantiate core.lyt:Layout aspect for null ('Class' is null or not an object)
    [W] Failed to repaint Wizard1
    I can see the roadmap but content of the wizard steps are not shown anymore. Everything worked fine with SP4. Anybody else with the same problem?
    Regards,
    Kevin

    Hi Guy,
    thanks for the info about the patched SPS5. Is it already available because there is no information in the SWDC about a patched version. In other words, how can I be sure that I really download the right version.
    Regards,
    Kevin

  • New items not shown

    Portal 3.0.8 - Solaris.
    I'm adding item to my content area and everything looks good until the item is submitted. It is then not shown on my CA page.
    If I create a new CA page the items will appear. But then the same thing happens all over again when adding new items.
    Anyone have a clue ?

    I was just over to my client and found some things out.
    No, I did not clear my browser cache but set it to check the page on every visit. Items still invisible.
    The items are invisible in both view and edit mode.
    This client originally created a content area with the NLS params set for the wrong language (default which didn't handle swedish chars). They then created a new content area using the correct NLS params. All CA pages created for this new CA will render items invisible. Creating new CA pages will not change anything.
    If setting the CA to use the CA page originally created for the first (default NLS) CA all items will be visible.
    Are we homing in on the problem here ?
    And yes, all this is done using the PORTAL30 user.

  • Why does 1 speaker crack when i click on different items (not all) after hp/windows updates?

    After installing several updates for Windows 7 & HP g72010nr at the same time, 2 problems have occured. 1 speaker cracks real loud when I click on different items (not everything) AND when running DVDs there are ripples all throught the movies. It's been about a month or more & I don't remember which updates they were since this is a new computer, I've had so many of them. Any quick fixes? Thanks in advance.

    Cool! If you dont have it already you can download Microsoft Security Essentials, which I use on my personal computer. There are TONS of virus scanners out there but I find this one to work well for me. Here is where you can get it if your interested: http://goo.gl/XF4L1
    Merry Christmas & Happy Holidays!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • SAP Inbox items not shown in UWL

    We are working on ESS , we have items in SAP Inbox and not shown in UWL for a employee.
    We are not able to login with the actual user. Is there any possibility to see UWL items of the item without his login?
    we have UWL connecters enabled for R/3 but still have problem for this user.

    Hi Kiran,
    If this is specific to one user or have you found same issue with others. To receive any workflow from backend system system need to be registered to UWL.
    Have a look at following threads for pointers
    /message/6018381#6018381 [original link is broken]
    /message/5093279#5093279 [original link is broken]
    /message/5093308#5093308 [original link is broken]
    Cheers,

  • Cost of producion item not related to actual costs of items isued to prod

    I have a scenario where a production order for producing a quantity of one of a specific item has been created and released. The Planned quantity of the unique Item used for production in Components Tab is 10, the  Issue method is Manual
    In Issue for production screen the quantity recorded is 12, 2 more than the planned
    Then the receipt for production has been recorded for 1 item.
    Valuation method for all involved items is Moving Average
    The system behavior expected by myself was the cost of the produced item was the cost of the component multiplied by 12. However the cost the system calculates is the cost of the component multiplied by 10.
    While the Summary of the production order shows Actual Component Cost as multiplied by the Actual Product Cost is just multiplied by 10
    Some ideas here?
    Julio

    Suda,
    Many thanks for your answer. I will try to explain the business scenario and why I think the cost should be different . In my explanation the sequence of actions and people performing actions is relevant.
    1. Product Engineering clerk determines producing parent item will require 10 components and based of that the BOM is created by Product Engineering clerk with 10.
    2. Production planning clerk creates production order based on BOM
    3. Production planning clerk releases the order
    4. Production clerk (the actual performer) requires 5 components to raw material warehouse (nothing recorded in SAP)
    5. Warehouse clerk 1 (at raw material warehouse) gives 5 components to production clerk. Warehouse clerk 1 uses Issue for Production transaction to record 5 components issued to production order
    6. Production clerk identifies that for this specific production order 10 components should not be enough so for finishing the order requires 7 components to raw material warehouse (again, nothing recorded in SAP)
    7. Warehouse clerk 1 gives 7 components to production clerk. Warehouse clerk 1 uses Issue for Production transaction to record 7 components issued to production order
    8. Warehouse clerk 2 (at finish goods warehouse) receives the item produced and uses Receipt from production transaction to record 1 item received
    From 4 to 8 actions the interaction is just between production clerk and warehouse clerks. It is not expected warehouse clerks neither production clerk have access to modify production order details. They just record what they do.
    At the end of the day the reality is that this specific product just produced costed more because more components were used (think the components can be kilograms of a substance or even pieces that can be with some defects just identified at production). And yes, there is a variance between the original order details and the actual components used. All this is shown at Order Summary Tab.
    But if the product is been valued using moving average method why the real components issued to production are not used to calculate the cost of the finished product and rather the "planned" components are been used?
    I have tried the option you mention. To modify directly the order but to issues arise from here.
    a) Every single time some extra components are required the Production planing clerk has to updated the order?
    b) If we do so no variance is reported and no action can be taken to avoid this variance.
    Your thoughts?
    Julio

  • Internal Item Number " Items not appearing in Sales order Line form

    Hi,
    We are in 11.5.7 vis. While choosing an item in the Sales order form, only the line items with type 'chargemaster' and 'vendor' appear. The items with type 'Internal item number' doesn't appear anymore. The item validation organization is set to the Master Inventory organization.(V1).
    When i checked the pricelist creation screen, with product attribute - item number, the product value field is empty and greyed out for all the items.
    I compiled the system Items flexfield. I tried adding a new product to the pricelist with product attribute-item number,product value - A000 .All the items (with their internal item numbers) appear while choosing the product, but the product description doesn't default and the field remains empty and greyed out.
    After saving the item in the price list and if i query for this particular item, the product description appears but the product value now becomes empty and greyed out.
    Any explanation as to to why this is behaving so and to rectify the same?
    Regards,
    Nithya

    Hi,
    Check item category determination (VOV4) whether the item category is determine with the combination of  material item
    category group,untill the material being read by the system it will not give the line item no,and also check at VOV8 for your doc
    type Item no.increment Ex: 10, is maintained or not ,if not maintain and try.
    Regards
    Ram

  • Upgrade item(Related Item) not appearing in LOV in Modifier form

    Hi ,
    I am using EBS 11i
    I am looking to setup a promotional upgrade modifier(itemA with itemB).I have setup the item relationship in Inventory as Promotional upgrade.Still the related item is not appearing in the Promotional upgrades upgrade item field in modifier form. Type of modifier am using is Promotion.
    am i missing any further setups?. Kindly help
    Thanks
    Shameer kappil

    Hi Venkatesh,
    Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
    Regards,
    Gajendra.

  • Forms 6i Menu Items not Lauchning (FRM-40010: Cannot read form...)

    Sorry for the newbie issue - I just haven't been able to figure this out...
    I inherited maintenance of a old Oracle Forms Application, I was told it was version 5. And all the source modules were appended with "v05" like form1_v05.fmb, etc. I since discovered that when the users launch it they run against the forms 6i run time - so I guess this means it is actually a forms version 6i application.
    The App has about 20 forms, 20 reports and a menu - and no project.
    I copied all the source files into a working directory, then I created a project with the project builder using the "use all files in the current directory".
    When I run the app ( by drilling down to this app's "logo" form - a splash screen contain our company logo, and a Menu structure it runs fine.
    But just about every menu item I attempt to select ( i.e. MENU->Catagory1->OrderForm or in my case something like MENU->Inbound->Entry/Maintenance) results in no new form launching and the status bar contains the error message like "FRM-40010: Cannot read form order_v05.fmx"
    In the above example the project does contain a order_v05.fmb, and it compiles fine ( in fact a project "build all" generates no errors or warnings ) - my single working directory contain all the source modules ( like fmb's, rdf's and mmb's) and compiled versions ( fmx's, mmx ) . Specificlly the order_v05.fmx is also there.
    So why can't the app find the compiled form compiled in the same project and located in the same directory?
    I also see several ERR files but the only thing the err files contain is a whole lot of lines saying things like " Compiling POST-FORM trigger on form... No compilation errors."
    Any help getting this beast to run would be appreciated.

    I may have a clue as to what is causing the issue, but don't know how to fix it.
    I started poking in the menu items, and the child menu item that is supposed to do something runs some "Menu Item code" like this:
    begin
         hide_window('DLG_MAIN');
    CALL_FORM( 'out_order_v05.fmx'
    , no_hide
    , do_replace
    , no_query_only
    , no_share_library_data );
    show_window('DLG_MAIN');
    end;I made a NEW root menu item, with a new child menu item and set it's "Menu Item code" like this:
    begin
         hide_window('DLG_MAIN');
    CALL_FORM( 'C:\Data\_OraFroms\ITFS_V05\order_v05.fmx'
    , no_hide
    , do_replace
    , no_query_only
    , no_share_library_data );
    show_window('DLG_MAIN');
    end;And when I made this change, my new menu item launched the form, but the original one did not ( notice the only difference is my new menu item gives a fully qualified path to the file name ).
    So it looks like my project is clueless as to it's own home directory - anyone know how I clue it in?

  • My user defined menu items not shown up in Main Menu

    Hi,
    I have some my own menu items need to add into Main Menu list, it works fine but only issue is the screen flash lot. Since all the menu items are in the form called "Main Menu" form then I tried to use oForm.Freeze(true) and oForm.Freeze(false) before and after adding menu items. Now the weird thing is though the screen doesn't flash but i can't see the new added menu items in the Main Menu form. But I can see them under the system menu Modules menu. Any idea?
    Thanks!
    Lan

    Hi All,
    After check the SDK help, I found the reason. I need to call oForm.Update() after. Now it works well.
    Lan

  • Line items not shown in GLs

    Hi All,
    I have a problem with line item display.  When I am running FS10N for some of GLs, they are showing values in the report.  But when I drilldown for line items, it is not the value that is appearing same as a total as the overall balance.
    It is happenning over the years.  In the previous years I have such problem for those GL accounts.  I have run the program for line item display, but the output is nothing changed.
    Do anyone have idea to solve this issue.
    Regards,
    AJ

    Hi,
    Do the following things ...
    1. Run F.16 (Carryforward GL balances) from the previous years to current year .. say for example 2006 to 2007, then 2007 to 2008.  Then check the balances once again.
    Still if you issue is not resolved, then let me know ur R/3 version and support pack level, this information is required to provide further help.
    all the best
    Prasad

  • Item not shown for clearing

    Hi everyone,
    I have a question for you concerning strange behavior of the clearing for vendor accounts. This is what it is about: I have a vendor let's say 12345. On this vendor's account I have two postings. One is posted with doc type KR (Vendor Invoice) and posting key 31 and the other one is doc type SA (G/L posting) and posting key 21. Selecting the accounts open items in FLB1N TC gives me both open items. However, going to F-44 to clear account 12345 without any selection gives me only the debit posting on the account.
    Both items are of the same month (only some days difference in posting date, etc.) The amount is exactly the same in Doc. Currency and Local Currency.
    Has anybody got any hints for me how to fix this and clear the account?
    Thanks a lot in advance for your help!
    Best regards
    Martin

    Hi Tony,
    thanks for your reply. I have checked that. The items have no clearing date. I have viewed the account selecting open items at key date today. This gives me both line items in the FBL1N view. The line items definitely do not have any clearing information set. In F-44 I still see the debit posting only.
    Regards
    Martin

  • Recently created items not shown in finder.

    In an effort to replace the invaluable (IMO) recent item canned searches that were on the older Mac OSX finder sidebars, I've changed the settings of the "All My Files" folder to display by "last modified". Only problem is that it doesn't want to show InDesign files or pdfs. The pdfs will show up about 20 minutes after creation, but that's not very helpful if I've just created something I need to email to a client immediately. Granted, I can navigate through the finder windows to the file and drag it into an email, but it's a lot easier just to open the "Today" or "All My Files" folder and see recently created files right there. Is anyone else having this issue?

    You don't say how long ago you migrated. If it was very, very recently it may still be indexing. If not you may try reindexing as directed in Spotlight: How to re-index folders or volumes

Maybe you are looking for