Itunes shut-off and iphone5 hang in white apple update screen
During my iphone5 update my itunes automatically closes while my phone still plug-in and now it stucks at the white screen update with a loading bar indefinitely. Help!! i cant switch it off or reboot the iphone
Hello cfooklim,
Thank you for using Apple Support Communities!
It sounds like you may need to put the phone into recovery mode and then do the restore after restarting your computer.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Take care,
Sterling
Similar Messages
-
ITunes 5 Won't Install -- Hangs on Unscheduling Apple Updates
Windows 7 64bit
Trying to update from last version to new version. Install goes until it hits the part where the dialog box says "Unscheduling Apple Software Update," the green bars goes a partial way, stops, retreats. Another dialog box appears and says "There is a problem with this Windows Installation Package. A program required for this installation could not be run. Contact..."
Then it backs out and reverts to the original/last iTunes version.
Tried disabling AV and Firewall...no joy.
Any suggestions?
Thanx!using MSICUU2.exe didn't help me. But, the new replacement app did:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
I fixed my problem like this:
Here's the deal -
1. can you install itunes via the APPLE SOFTWARE updater?
I couldn't so I downloaded ITUNES and tried to install it that way. Hence I got the same error hang as you. Nothing worked, (Multiple attempts at uninstall reinstall, stopping of Services, Reg cleaners etc..)
2. If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program.
OK so I couldn't find a Download for this. But: if you have WINRAR, open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file. Execute the APPLESOFTWAREUPDATE.MSI separately. And you will not be able to install it and have a similar issue as per your Itunes install. This of course leads you to believe that the Itunes.exe install is also installing all of these components including the applesoftwareupdate silently. It must BOMB at that portion of the install and you are done.
3. Your goal now is to get the applesoftwareupdate installed. How do you do this. Well - here is what I did.
a. downloaded and RUN a PC Installer FIX it tool from Microsoft. This is a replacement for the older MSI fixer they used to use.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
b. It will list programs to attempt to fix.
choose AppleSoftwareUpdate.msi
c. Once it is done, then reinstall apple program updater using
AppleSoftwareUpdate.msi
Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
(Please note: that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN: services.msc to get there - although this man not be necesarry.)
Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu) it should list ITUNES
select ITUNES from here and it will update.
KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program. If that program is not working fix it. Then Bingo.
I am sorry to see folks having this problem for weeks.
APPLE, Spread the word. PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update. etc... Please improve your software updater program to check for invalid registry upon launching the app. This will prevent people thinking it is an APPLE issue. It appears to be a problem on your PC's registry settings for the APPLE Software update.
Bruno Ricci -
IPhone 5 randomly shuts off and it is stuck at the loading screen with codes popping up
My friend's iPhone randomly shuts down today and the loading screen with the apple logo came on with some codes. I tried restarting it manually but the same thing keeps happening. The codes start with [nand] and mention something about blocks. What could be the problem?
Could be a hardware fault. It may need to be replaced.
Have you tried restoring it?
~Lyssa -
Iphone can't power off and sceen hang on to apple icon
Hi my iphone can't power ?
Try a Hard Reset, hold the sleep/power button and the home button together for about 20 secs. you wont lose any data doing this. it should reset the phone.
-
IPad 3rd gen no longer charges unless shut off and not recognized by iTunes
iPad 3rd gen no longer charges unless shut off and not recognized by iTunes. Done 2 resets, used original charger and cable and bought brand new charger and cable from Apple store. Nothing works. This started yapping after the iOS 7.1.1 update.
Common troubleshooting is to try a different USB port and to give your ipad a reset. (hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot)
You can also try on a different computer to see if it's the ipad or the computer.
When you charge, do you try to charge plugged into the wall? that's the best way to charge.
If you go through all that and it's still not working hten it may be time to make an appointment at your local apple store and have them check it out -
My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!
& it keeps trying to turn on but it wont . like the apple logo pops up for a minute , then turns off.Had exact same problem. Rang Apple support and various apple repairers. All of them said in effect, too bad, you'll have to lose everything since your last backup. It's a work phone with very important stuff on it and the latest backup was on a computer that had a virus. Convergence of crap :/
Happened to talk to a friend who said to try replacing the battery. Did that. Problem fixed. All data saved.
To all Apple support people: rather than say 'once it's in recovery mode you lose all data' try saying 'replace your battery and see if that works first'!!!! -
I have an ipod touch that continues to have a black screen with the white apple on it. It won't shut off and is completely frozen. This happened when we tried to restore it last night. Help please!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls
The iPad is telling you it has entered the recovery mode - you need to follow the instructions in http://support.apple.com/kb/HT1212 for connecting to a computer running iTunes by way of the recovery mode.
-
my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol, my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?
Glitchs like that sometimes happen
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If sit still reocurrs a lot, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Just updated my iPad it shut off and now say connect to iTunes and when I connect it it says restore ipad hit that button and says that it can't restore
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
Tried to sync apps.. phone shut off and sed to connect to itunes
i have the 8 GB and i tried to sync apps.. phone shut off and sed to connect to itunes and when i did it just turned off and turned back on automaticy and still sed to connect to itunes even though it already was. It kept repeating this and now it wont charge or turn on or off. I need help
i tried that and nothing changed... it just has a slice of blinking red in the battery on the screen and a picture of a plug with an arrow pointing towards a lightning bolt.
-
My phone keeps shutting off and saying "connect to iTunes." So I did and nothing happened. it says to restore it but I want to keep all my messages and photos etc i just want it to turn on so i can sync it and then ill restore it. sometimes the screen stays black but the light will come on or it will just keep restarting. please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i was making a call yestrday morning and my iphone shut off and hasnt turned back on.. i tried charging it & connecting it to itunes an still no help someone help me please i have an 2 page research paper due monday
In that case, it's time to get the device replaced.
Out of Warranty replacement is $149US for the iPhone4. -
I got macbook pro about a year and a half ago and up until now it has been running fine.
However, in the last few days, it has been started to run tediously slowly!
It wont allow me to open applications and i have to force quit out of any applications I finally manage to have because they freeze or stop responding.
On Google Chrome, pages become unresponsive every few minutes.
Even writing this post took more than 20 minutes as the laptop kept freezing and the webpage became unresponsive.
It also randomly shuts off and when it restarts, a message comes up saying my Macbook was restarted because of an error.
I haven't downloaded or updated anything that I know of recently that would have caused this.
Ive been reading through some of the fourms on this and I thought it'd be helpfull to post some of the information you may need to help me solve this problem!
Id be very gratefull if any of you could help! Thanks!
In the Activity Monitor, my CPU is currently:
System: 3.40%
User: 4.20%
Idle: 92.40%
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 6:22:39
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (357.93 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 44 - Corrupt!
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] org.eyebeam.SelfControl.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
[System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
Android File Transfer Agent
Internet Plug-ins:
OVSHelper: Version: 1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
DivXBrowserPlugin: Version: 2.2 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 Cannot contact Adobe
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
SharePointBrowserPlugin: Version: 14.1.0 3rd-Party support link
AdobePDFViewer: Version: 10.1.9 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Safari Extensions:
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
AdBlock: Version: 2.5.45
AdBlock: Version: 2.6.18
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Growl 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
12% WindowServer
4% mds
3% opendirectoryd
3% Google Chrome
2% coreaudiod
Top Processes by Memory:
205 MB com.apple.IconServicesAgent
147 MB Finder
131 MB Google Chrome
123 MB VLC
106 MB softwareupdated
Virtual Memory Information:
516 MB Free RAM
1.43 GB Active RAM
1.40 GB Inactive RAM
676 MB Wired RAM
1.83 GB Page-ins
0 B Page-outsPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Maybe you are looking for
-
To protect or not to protect....that is the question
I've got a question for all my fellow Mac users out there. I recently purchased a 2011 MacBook Pro in December of 2011. I absolutely love the computer. What I was going to get some input on was the issue with anti-virus protection. I have seen a
-
View a page as the user would (not Administrator
When I'm creating new sites and views I want to see what the site looks like if I was a non-admin or public viewer. Other than logging out or having two computers what's the best way for the Administrator to view a page as the user would? Cheers, Mar
-
The error panel told me to contact you. Hopefully you will let me know what to do. Juan zumbadoEverizon.net Photoshop also told me that it could not do something with colors- but I could not replicate the problem. Juan
-
Hi, I have a particular wireless design that requires one WLC 5508 to be connected to two seperate swithces. Port 1 of WLC is connected trunk to Switch A and Port 2 of WLC is connected to Switch B. Each switch has its own local VLANS. When I connect
-
Regular flash button to trigger List Component
I have two list components....which are bound together. Depending upon which item is selected in the 1st list will determin what gets displayed in the second list. I have some buttons that correspond to the items listed in the 1st........which wh