ITunes update wont load. asking for Drive F. There is no drive F.

Tried to load iTunes update. I proceeds and gives a window that says that there is no room on Drive F. I do not have a Drive F. iTunes should load to the C drive.

Although you're getting a different error message, I'd try the following user tip with that:
"Invalid Drive X:\" install errors

Similar Messages

  • Newest itunes update wont load 2-22-06

    I downloaded the newest update for itunes and now it will not open. Tried restarting. Tried deleting the program completely and re-installing using the disc that came with my nano and still....it will not load when i double click on it. What can i do?

    I have had the same problem...I updated when told a new version was available and have not been able to open itunes since...I unistalled and then reinstalled with the original software and then transferred all of the itunes music saved in my documents back onto it but it still won't play...I went to the support site and did everything they reccomended and still no luck...hopefully someone will respond that can help here.
      Windows XP  

  • Itunes will only load on C drive, not E drive

    Greetings, Itunes will only load on C drive. (new build win 8.1) I have a 120G SSD for C and a 1tg Hdd for E. I am trying to load itunes on the E drive (1tb hdd) but no matter what I do, it loads on the C drive. I tried running install file from the E drive. It installs itunes on the E drive. I check the C drive and its not there. But when I sync (homeshare) it puts everything on the C drive.
    I have tried just changing the letter C to a E on the screen where it asks where you want it installed. I have tried just a E, I have tried creating a folder on E first. and evey other combination of the above. (complete uninstalls between attempts
    Itunes will not fit on the C drive.
    Thanks in advance

    Well, I talked with a guy at work who has done the same as I'm trying. He says that besides setting up Itunes in the new drive, that there is another place where you have to tell itunes where to put the import data. But he can't remember where it was,so I am pointed in the right direction anyway.

  • My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

    My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve  this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

    I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

  • I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?

    I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?

    Hi peacemakerco,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to sign in on the iPhone with the right Apple ID:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Best,
    Jeremy

  • TS1424 The latest iTunes update appears to be for 64bit processors; I am trying to update a 32 bit processor with no success. How do I reload the 32 bit iTunes software?

    The latest iTunes update appears to be for 64 bit processors, I am using 32 bit software. I need to reload my 32 bit iTunes software but I am encountering failure messages... "Service  'Apple Mobile Device failed to start. Verify that you have sufficient priveledges to start system services. How do I verify the priveledges and load my software?

    Hello DavAM,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Restart the Apple Mobile Device Service (AMDS)
    Set the Apple Mobile Device Service Startup type to Automatic
    Remove and reinstall iTunes and AMDS
    Best of luck,
    Mario

  • HT1751 Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?

    Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I updated my iphone4 aps and now facebook wont load although the icon is there. I have tried restarting. What can I try now?

    I updated my aps on Iphone4 and now facebook wont load although the icon is there. I tried restarting. What can I do now?

    jflight007 wrote:
    but some of my music was no purchased from itunes so that will all be lost though right?
    ALL of your music should be on your computer in itunes.  Is it not?
    How did it get on your ipod in the first place if not from your comptuer?
    Everything on your ipod should be on your computer and you should be syncing regularly.

  • HT201363 my ipad went on update and now asking for passcode which i don't know

    my ipad went on update and now asking for passcode whcih i don't know what should i do now to start operating

    Hey sunny1008,
    Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

    I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

    The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
    If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
    After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

  • When trying to update apps it asks for account password but it doesn't show my account. Help!

    When trying to update apps it asks for account password but it doesn't show my account ID, it shows my dad's. How can I fix this so I can sign in?

    It sounds like the apps were purchased using your dads account, so they will have to be updated using that account.

  • Hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!

    kaylsk1 wrote:
    udated and its on 10.6.8 yet still no change
    Your signature in 1st post was 10.8.2.
    You went backwards?
    Did you reformat and reinstall when you first purchased it?
    If not I HIGHLY recommend you do that before you do anything else.

  • Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

    Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

    You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (94816)

  • My Ipad said there was an update. It asked for a network name which i wrote, sikkerhed WPA2, and my internet code - now my screen is frozen - it won,t do anything at all - help please

    My Ipad said there was an update. It asked for a network name and i typed my e-mail network name and password. Now I have a locked frame where it says  Another network - name (my network name)  safety - WPA2   password - my internet password. Now it is frozen - when i press button it says Ipad not adjusted - continue? and nothing happens alt all. I can't get away from this screen. Please help

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • Itunes store wont load properly after upgrading to 10.5

    My itunes store wont load at all. Loads halfway, and stops.

    Any tips then as to how to resolve it?  I've uninstalled / reinstalled itunes and allsorts of other things but still no joy.

Maybe you are looking for

  • Problem in using asant tool in Sunone Apps Server 8.0 on Windows XP

    Hi, I am using asant.bat tool to build example applications in j2eetutorial14. whatever taget i am using to build the examples in sample directory ie, <J2EE_HOME>/j2eetutorial14/examples/web/bookstore> asant build <J2EE_HOME>/j2eetutorial14/examples/

  • Bridge still not starting in CS6 (extended)

    Same issue; bridge will not start. As of this date, this is the second install of CS6. The first was a download and the second was from a disk. Bridge will not start ! I had Ps v 7 on here and that was removed as was the download copy. The problem is

  • How to find  full path

    Hi, how to find the directory total path where my java programm is running programatically? thanks in advance....

  • Auto Production Order Settlement

    Dear experts, Please advise how to implement the auto production order settlement (configuration, exit)? i need to automatically carry out the settlement procedures (in the background?) as soon as the production order gets the 'TECO' status. I search

  • Split-mirror backup: Attempt to mount unknown instance

    Hi experts, I am backing up the Oracle database of an SAP system online via the split-mirror approach with a BRBACKUP -t online_split command. After having copied all datafiles, BRBACKUP terminates with the following error message (excerpt): BR0330I