IWeb 3.0.3 and mobileMe galleries

I recently upgraded to iLife 11 and the most recent version of iWeb, 3.0.3. In iWeb on my computer almost everything looks fine, the same as it was before the upgrade. The mobileMe gallery widgets are in place as usual, as well as any audio files. I did notice in the Insert pull down menu under Widget>MobileMe Gallery> this appears: (no albums or movies available). That doesn't seem right.
After the upgrade, all my entries had turned to red, so I used the "Publish Site" button, the publish went pretty much as normal, and all the entries once again turned blue. However, not everything is working properly when I visit the website (using Safari 5.0.5). The mobileMe gallery widgets do not pop up, only a blank square where they should be. Also, the audio files seem to be hit and miss, sometimes they download while at other times I just get the little Quicktime "Q" symbol where the progress bar would normally be. I published a second time using the "Publish Entire Site" option from the File pull down menu. That did not change anything.
Any suggestions to remedy this situation are greatly appreciated.

The MME Gallery plugin isn't working properly in iWeb.
To overcome that, you can still use the code to display the Gallery. Have a look at the source of this page :
http://www.wyodor.net/Scripts/MeGallery.html
Grab the code and paste it in a HTML Snippet. Use your own MMe username and Gallery number. Benefit is, you can also change the width and height of the widget.
Problem with the iPad, iPhone and iPod touch is, they do not support Flash.
So I created my own solution :
http://www.wyodor.net/mfi/MMeGallery/

Similar Messages

How to move my entire iphoto library and all albums and mobileme galleries to my new tower?

What is the best way to move my entire iphoto library and all albums and mobileme galleries to my new tower?
I want to move it smoothly without hours of reconfiguring albums and Mobileme galleries. Already have a timemachine backup of the older iMac with the iphoto library.

Connect the two Macs together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN

IWeb 09 issue with displaying MobileMe Galleries in Weblog

Hello everyone,
I searched but did not see this exact issue. I upgraded to iLife 09 this week and my site from iWeb 08 opened successfully in iWeb 09 (although everything was Red). After adding 3 new blog entries, I decided to publish today. At first, the publish entire site errored out with the progress circle half way. I simply tried again and it finally completed the publish entire site.
I checked my website on-line on a Mac using Safari, and on Windows using I.E. and Safari, and have the same problem on all three.
All of my weblog entries that contain a MobileMe Gallery (both photos and videos) are fine in iWeb just as they were before the upgrade. However, when I view the weblog on line, the Web Galleries do not show up on any of the blog entries. There is just a blank space where they used to be.
I also checked my actual Web Gallery on both Mac and Windows and can view content on both. I repaired permissions before my publish and I have noticed one item since I upgraded to 10.5.6 this week (also). I get a permission error related to "Library/PrivateFrameworks/iLifeMediaBrowser.Framework" that does not appear to get repaired because it shows up every time I repair permissions. I also get another unrepaired permission related to "CoreServices/RawCamera.bundle" but I don't think that is related to this issue.
I have always received excellent help on this forum when encountering an issue and am hoping there is one for this issue. Any and all help is greatly appreciated.
Having read many of the comments here on this forum, I feel fortunate that my issues were not worse. Here is the URL of a weblog entry that should have 4 MobileMe Galleries at the bottom:
http://web.me.com/sabretado/sabretado/Weblog/Entries/2009/2/19Monterey_Bay_Aquarium_and_Fisherman’sWharf.html
Thanks in advance,
Santiago

http://web.me.com/sabretado/sabretado/Weblog/Entries/2009/2/19Monterey_Bay_Aquarium_and_Fisherman’sWharf.html
Your URL contains apostrophe character, iweb javascript code had been changed in web09.
It converts special character in your URL path to UTF escape codes and lost in translation when try to use it.
You galleries are there in the widget mark files, but iweb javascript can not read its own (LOL!) widget markup URL:
http://web.me.com/sabretado/sabretado/Weblog/Entries/2009/2/../../../../Weblog/E ntries/2009/2/19Monterey_Bay_Aquarium_and_Fisherman%E2%80%99s_Wharf_files/widget2markup.html
notice the %E2%80%99, that's UTF character.
Try to remove the apostrophe character from your page name and give them feedback: http://www.apple.com/feedback/iweb.html

Aperture 3 and MobileMe Galleries created in iPhoto

I wanted to post this to hopefully help someone else should they run into the same thing.
I recently upgraded from point and shoot camera's to a higher quality camera, so I also decided that it was time to upgrade from iPhoto to something better. I decided on Aperture as I am not quite ready to commit to the expense and time to learn something as complex as Photoshop.
Well, the first time I opened Aperture and told it to import my iPhoto library, it worked without any difficulty. But, I noticed something was missing. My MobileMe galleries where not displayed in the inspector window for Aperture. I could not for the life of me, figure out how to get them to show up in there either.
I went to the Apple store and talked to some Aperture users there and no one could seem to tell me how to fix this. It was even more frustrating because all of my photo albums from FaceBook came up in Aperture just fine.
Finally in a last ditch, hail mary pass, of an idea, I went to the web UI for my MobileMe galleries. I figured that maybe if I edited something about those galleries, they would then show up in Aperture.
Well, I went into the properties for one of the galleries that I was not seeing in Aperture, and low and behold, there in the properties was an option to choose what application that gallery would sync to. The only options are iPhoto or Aperture, so I changed each gallery to show Aperture as the chosen app to sync with.
Finally they now show in Aperture, of course, as you might expect, they no longer show in iPhoto.
I have no idea why the Import process does not warn you about this, and / or offer to change them for you, but it was very frustrating.
If this can help someone else new to Aperture to avoid this frustration, then I am glad.

Thanks Richard, very helpful. I wondered why I couldn't see my old mobileme galleries in Aperture.
I have swapped between iPhoto '09, Aperture 3, iPhoto '11 and now back to Aperture. Whilst I love the ease of use and relative speed of iPhoto, Aperture's adjustments and masters/versions handling has the edge for me now that my masters collection is too big for my MBP. And with a clean install of Lion my machine now seems more responsive than it has been for a while.
Changing the setting of each gallery is a bit dull, is there a global 'manage mobile me galleries with iPhoto/Aperture' setting anywhere?

Aperture and MobileMe galleries

Hi,
I have the problem that the sorting criteria of my MobileMe galleries always change during the synchronisation process. I want the newest images to be shown on top. That's why I choose "date" as criteria. When I sync the gallery the sort criteria is set to "manual" automatically and the oldest images are shown on top.
I hoped that the newest update solves this problem but that is not the case It's still the same situation.
It is really annoying because you never know how your images show up in the MobileMe gallery.
I use Aperture 3.0.2 on a Macbook Pro 15'' with 2,4 GHz C2D.
Thanks for your feedback.
markus

I think you are talking about the order of the Galleries here. If so it is very easy to change them but certainly not intuitive to say the least. You need to log onto your MobileMe account through a web browser. The easiest way to get there is: Apple Menu: System Preference: MobileMe button: Account tab: Account Details button.
You then log in with your name and password.
Click on the Gallery tab (sunflower) and you can drag your MobileMe Galleries into whatever order you want. You can also change the main Gallery name here.
Now I'd be real happy if I could make multiple sites and not just additional albums in the same site.

.mov Files have Black Thumbnail in iPhoto '08 and MobileMe Galleries

I'm guessing this is possibly because the video starts from black and fades in? Is there any way to force iPhoto to use something other than the first frame for the thumbnail?
Message was edited by: dixonge (to correct typo in Subject)

That is the reason and there is not way to change it that I know of
LN
Message was edited by: LarryHN

IWeb and .Mac (MobileMe) Galleries

Went to add some iWeb pages with links to a few of my .Mac (or now MobileMe) Galleries. However, when I go to the "Insert" menu and select .Mac Web Gallery I'm informed that "No albums or movies are available." Now I know for certain I have 5 Web Galleries (you can even see them at gallery.me.com/noraa). Is iWeb not seeing these galleries because of the transition to MobileMe. Is anyone else having a similar problem. Thanks for all you're help!
P.S. I am properly logged into MobileMe in the System Preferences and can access my iDisk via the Finder, sync items, access my email, etc.

Sorry - did not help. The only effect was, that my website was lost and a new blank website came up.
But it is more clear that it seems to be a bug in iWeb:
Only web-albums appear in iWeb that are created and fed by iPhoto.
But mine are fed by Aperture!
There were two albums left which were connected to iPhoto. I went to mobileMe web interface and got "info" for the two albums which were still connected to iPhoto and changed this to Aperture.
The result is: no album is left to show up in iWeb as a "MobileMe web gallery" to be inserted as a widget.

IWeb not finding my MobileMe Galleries

I've just found the MobileMe Gallery widget and wanted to play around with it to see what exactly it does and what it looks like. I've made a new blank page to try it out and dragged the widget onto the page, but the little floating box says "(No albums or movies)" in the Display option, and the the box on the page says, "Upload an album or movie to MobileMe and then select it from this widget's menu."
I clicked the "Learn more" link on the floating box and read the help page. It didn't help. It just said that if there's nothing in that Display menu, that I'm either not connected to the internet or I haven't published any albums or movies. Both are wrong, though. I'm connected to the internet; I'm posting this, and have been browsing other sites as well, including my own MobileMe Gallery page...which brings me to my next point, which is that the other condition is also wrong: I do have albums published to MobileMe. Many galleries. And they're all there, they all work, iPhoto is in sync with them, etc. And it's the same MobileMe account, no doubt about that.
So why doesn't the widget in iWeb seem to know about my MobileMe galleries? Or is there some important fact or concept I'm completely overlooking?

That has been an ongoing problem here. First try the following:
1 - go to the System/MobileMe preference pane and log out of MMe.
2 - login with a bogus username and password like "test" and "test". This clears the caches.
3 - login with your correct username and password.
4 - launch iWeb and try again.
Next, create a new test gallery in iPhoto and publish. Then launch iWeb and try again. Some have said that the new gallery worked to jumpstart iWeb.
OT

IWeb won't import MobileMe galleries

hi there,
apple claims that iweb can import albums that are published on the mobileme-gallery. however, I created an album via aperture and published it (worked fine), then created a website in iWeb and tried the "insert -> mobileme gallery ->" (hope that's right, using the german version)menu, but everything's blanked out: "no albums or films available"
hm?

There's a problem with Aperture galleries and iWeb. Also password protected iPhoto galleries will not display in the Widget menu. You need to publish them unprotected and then add the password.
If you want to have the gallery embedded in your web page use an HTML Snippet and iFrame code like I've done in this demo page. You can set embedded portion to go directly to the mosaic mode as I've done with it or to the normal grid mode. All it requires is using the right URL for the mode you want. The code used is also shown.

IWeb Doesn't Find MobileMe Galleries

I've built a Web site in iWeb v3.0.1 and want to post fotos and movies to it from my MobileMe Galleries. Even though I can plainly see existing MobileMe Gallery content both online and within iPhoto, when I drag the MobileMe Gallery Widget to my page, instead of giving me selections to choose, I get the Warning Triangle and the dialog, "Upload an album to movie to MobileMe and then select it from this widget's menu."
I've fooled around with this every way I can figure without success. Who has an idea how to get my Galleries recognized in iWeb?
Many thanx in advance!
DCR
= = =

I'm new to Iweb. Am also having trouble getting Iweb to find my Mobile Me galleries. I've tried the snippet below, but it still doesn't work. I put my Mobile Me ID where is says "mobilemeID:, right? Then backslash, then the gallery number. When I do this, all I get is a little flicker in the photo screen on the webpage. The Mobile Me gallery widgit actually worked up until a few days ago when the link went dead. Any suggestions? Am I using the snippet correctly? I saw one person said to "refresh" the Mobile Me galleries. How do I do that? I know the galleries are there because I can share them via email.
thanks!

IWeb 08 can't see my MobileMe galleries

When I go to Insert/MobileMe Gallery, it is greyed out and states "No albums or movies available". I have 6 unrestricted MobileMe galleries on my account. Why can't iWeb see them, any ideas?
Paul

No, I tried publishing a movie today using QuickTime Pro, iWeb, couldn't see that either. I normally publish from Aperture but have since tired publishing albums from iPhoto, that didn't work either?

HT201317 I have a MobileMe account and have shared many MobileMe Galleries. MobileMe Galleries are going away in June. How can I share a photo album with others using iCloud?

I have a MobileMe account and have shared many MobileMe Galleries. MobileMe Galleries are going away in June. How can I share a photo album with others using iCloud?

The new ios version of iPhoto allows sharing. Here's a blurb from Apple's web site:
There’s the old way of creating photo galleries, then there’s the iPhoto way. Select a group of photos and iPhoto automatically flows them into a beautiful journal that’s fun to personalize and share online. Touch a photo to make it bigger or smaller. Or drag it to a different spot on the screen. iPhoto adjusts the page around whatever you’re doing, so your journal always looks great. You can even add captions, maps, dates, and weather — giving family and friends the big picture at a glance.
More things you can do:
With iPhoto, there’s more than one way to share a photo. Post pictures directly to Facebook, Flickr, or Twitter. Play an impromptu slideshow on your iPad or iPhone. Or stream photos to your HDTV to give your big moments room to shine.
I have not used ios version of iPhoto to share "journals" and I'm not sure this is part of iCloud or not. You'll have to do a google search on "ios iphoto" and read up of this journal thing. As far as I know, this is the only way of sharing photos. I'm not sure whether other friends use a browser to view these journals or whether they need something special. Any way - search around to find answers.

IWeb and MobileMe Gallery

I am trying to upload pictures from the MobileMe Gallery. I have albums published but when I move the MobileMe widget to the web page I am creating it reads "No albums or movies". Please help.

I've jumpstarted the MMe widget with the following 2 fixes before:
Try this:
quit iWeb
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "Ying" and "Yang". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
Ahother method that worked one time was:
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
HOWEVER, a way to embed your MMe gallery and not worry about fixes is to go online and get the URL of your MMe gallery and plug it into the following code in an HTML snippet:
<script src="http://gallery.mac.com/g/flash/photowidget_iefix.js" type="text/javascript" charset="utf-8"></script>
<script language="JavaScript" type="text/javascript">
writeObj("http://gallery.me.com/MobileMeName/XXXXXX", 226, 199);
</script>
Thanks to Wyodor for the code.
Where XXXXXX is the number of your MobileMe gallery
OT

How to migrate sites and blogs made with iWeb 1.1.2 into MobileMe?

How to republish or migrate sites and blogs made with iWeb 1.1.2 into MobileMe?
I can not find instructions for that, and when trying to publish into .Mac, I consistently get an error message. The sites would look better as they are, but ...

tortuga wrote:
How to republish or migrate sites and blogs made with iWeb 1.1.2 into MobileMe?
If you're referring to last year's transition from .Mac to MobileMe, your iWeb websites are still available at the same URLs and have also been given a new URL at (www.me.com). For example, (web.mac.com/emily_parker/) will work as will (web.me.com/emily_parker)
tortuga wrote:
I can not find instructions for that...
I don't think there's anything special you need to do, but anyway, this Apple doc may be of interest:
_dotMac to MobileMe transition FAQ_
tortuga wrote:
...and when trying to publish into .Mac, I consistently get an error message.
What's the exact text of the error msg? This Apple doc may help:
MobileMe: Troubleshooting iWeb publishing issues
Also, MobileMe live chat support is now 24/7 — see this announcement.
By the way, your Public Profile indicates you're running Mac OS X (10.5.4) — if that's true, you should upgrade to 10.5.8 via  menu > Software Update...

MobileMe galleries and Aperture stacks

I'm using MobileMe galleries to share and display some photos. It seems you can't upload images from within Aperture projects when they're stacked, at least only the images on the top of the stacks. I often want to upload a whole project, without unstacking, so I just want to selec-all and create a new album. But all I'm uploading are the top images of each stack. Does anyone know what the solution might be?
Many thanks,
Richard

Richard,
This is expected behavior when using Stacks. The purpose of a stack is to stack groups several images of which you only intend to use one, known as the pick.
One solution to allow you to keep your stacks but use all the images in MobileMe Gallery, is to create a Smart Album within the project and use this Smart Album for your MobileMe Gallery.
Smart Albums you create offer the option Ignore stack groupings by unchecking the "Include stack picks only" from the Smart Album criterion. If this option is deselected (the default for a Smart Album), then all images that meet the criteria for the Smart Album will be available in the Media pane, regardless of stack pick status.
See: Working with Stacks - http://support.apple.com/kb/HT2940
See: "Handling of Stacked Images" in Tips on Sharing with iLife - http://support.apple.com/kb/HT1056
Hope this helps

IWeb 3.0.3 and mobileMe galleries

Similar Messages

Maybe you are looking for