Java Mission Control 5.2  Using Flight Recorder with GlassFish 4

Hello,
I followed the steps in the following link to monitor a GlassFish Application with Flight Recorder .
Enterprise Software Development with Java: Java Mission Control 5.2 is Finally Here! Welcome 7u40!
But I am getting the following Error when double click the "MBean Server":
Could not connect to GlassFish (3376) : Unable to resolve connection URL
Unable to resolve connection URL
can you help me?
Thanks in advance,
Roger Solano.

I downloaded Glassfish 4.0 to try this, also following the setup instructions for adding the jvm flags.
I could however connect with the MBean Server.
Could you send us the full error message, and possible also start JMC with
jmc -consoleLog
(add "| more" on Windows)
Are you running JMC 5.2 or 5.3?

Similar Messages

  • 30 mins flight recording shows 1 hour 30 mins  in published dashboard of Java mission control

    Hi,
    We are facing some issue during flight recording using Java Mission Control (version: 5.4.0 (M5.4.0-102, 162463)).We have set flight recording interval for 30 mins in java mission control. But after completion, it showed 1 hour 30 mins in published dashboard. Though the flight recording has been completed within 30 mins. The issue is happened  for 15 mins,20 mins flight recording  also.
    In published dashboard, some extra time has been added before starting of actual test.
    Because of this extra time, we are bemuse to find out the actual result.
    Please help us.
    Thanks
    Debraj

    Hi,
    Sorry for late reply.
    We are doing flight recording for OSB performance testing.
    We have followed below steps during testing
    a. Disabled all the services.
    b. Then we start flight recording.
    c. After 20 seconds gap we are enabling the services to poll data.
    but after completion of flight recording it is showing wrong time interval in dashboard.
    Regards,
    Debraj

  • Issue with Java Mission Control 5.3

    I see the following issue when using Java Mission Control 5.3 - the text area that appears in the Method Profiler section of the Code => Call Tree tab accepts text for filtering purposes. However, the filtering is seen to be applicable only to the top level nodes. For e.g., I am unable to search for a certain Java package name (or its part) that I know exists deep down in the stack trace. Is there a way to search for text that appears in lower level nodes? I find that the search does not work even if I expand the tree using the Expand Subtree option. Thanks for any insight.

    I also have this issue on 5.3. It is very difficult to do even a basic level of profiler analysis. The tool is ok at finding big watermelons (CPU cost or memory allocations), but when you want to drill in and see any more detail, it becomes quite painful. Best case is that I would be able to "swim" through the profile data, moving easily from method-to-method, and see the recorded sample counts in a base (samples in this method itself) and cumulative (samples in this method and all called methods) fashion. The indentation in the tree view can be painful. I would suggest a more simplified view as an option,
    PARENT (callers) methods, full names and cumulative sample counts (percentages would be nice as well)
    SELF (called) method, full name and cumulative sample counts (percentages would be nice as well)
    CHILD (calles) methods, full names and cumulative sample counts (percentages would be nice as well)
    Clicking on any row in the above immediately makes that method become the SELF in the view.
    Also, I should be able to enter the class/method name into some text box above this view and easily get into the data for the method. With the current tool, there is no way to quickly go to the data for a specific known method.

  • Difficulty Installing Java Mission Control in Eclipse Juno

    I have installed JDK 1.8.0_11 and have a fresh installation of Eclipse Juno (4.4.0).  I have tried both sets of instructions at: Oracle Java Mission Control, but neither work.  When using the update site, I get the error:
    Cannot complete the install because one or more required items could not be found.
      Software being installed: Oracle Java Mission Control IDE Integration 5.2.0.157284 (com.jrockit.mc.feature.ide.feature.group 5.2.0.157284)
      Missing requirement: Mission Control Documentation 5.2.0.157284 (com.jrockit.mc.docs 5.2.0.157284) requires 'bundle org.eclipse.help.ui [3.5.0,4.0.0)' but it could not be found
      Cannot satisfy dependency:
        From: Oracle Java Mission Control Console 5.2.0.157284 (com.jrockit.mc.feature.console.feature.group 5.2.0.157284)
        To: com.jrockit.mc.feature.core.feature.group [5.2.0,5.3.0)
      Cannot satisfy dependency:
        From: Oracle Java Mission Control Core 5.2.0.157284 (com.jrockit.mc.feature.core.feature.group 5.2.0.157284)
        To: com.jrockit.mc.docs [5.2.0.157284]
      Cannot satisfy dependency:
        From: Oracle Java Mission Control IDE Integration 5.2.0.157284 (com.jrockit.mc.feature.ide.feature.group 5.2.0.157284)
        To: com.jrockit.mc.feature.console.feature.group [5.2.0.157284]"
    Here is another error listing:
    eclipse.buildId=4.4.0.I20140606-1215
    java.version=1.8.0_11
    java.vendor=Oracle Corporation
    BootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=en_US
    Framework arguments:  -product org.eclipse.epp.package.java.product
    Command-line arguments:  -os win32 -ws win32 -arch x86_64 -product org.eclipse.epp.package.java.product
    org.eclipse.equinox.p2.transport.ecf
    Error
    Wed Sep 03 15:15:03 EDT 2014
    Unable to read repository at https://download.oracle.com/technology/products/missioncontrol/updatesites/base/5.2.0/eclipse/content.xml.
    javax.net.ssl.SSLException: hostname in certificate didn't match: <download.oracle.com> != <a248.e.akamai.net> OR <*.akamaihd.net> OR <*.akamaihd-staging.net> OR <a248.e.akamai.net> OR <*.akamaized.net> OR <*.akamaized-staging.net>
        at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:227)
        at org.apache.http.conn.ssl.BrowserCompatHostnameVerifier.verify(BrowserCompatHostnameVerifier.java:54)
        at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:147)
        at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128)
        at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:439)
        at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
        at org.apache.http.impl.conn.ManagedClientConnectionImpl.open(ManagedClientConnectionImpl.java:294)
        at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:643)
        at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:479)
        at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
        at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
        at org.eclipse.ecf.provider.filetransfer.httpclient4.HttpClientFileSystemBrowser.runRequest(HttpClientFileSystemBrowser.java:259)
        at org.eclipse.ecf.provider.filetransfer.browse.AbstractFileSystemBrowser$DirectoryJob.run(AbstractFileSystemBrowser.java:69)
        at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)"
    It looks to me as if something (the "docs"?)  is missing from the update site.  Any help would be appreciated!

    I would recommend the latest JMC, which is currently 5.4.0, it should work in Eclipse Luna (4.4.0).
    To get around the issue with the akamai certificate you need to use the http url:
    Oracle Java Mission Control

  • (261718088) Q ADVC-4 Can Timer Control/Polling be used to interact with webservices developed outside of WLS?

    Q<ADVC-4> Can Timer Control/Polling be used to interact with webservices developed
    outside of WLS?
    A<ADVC-4> Absolutely, Timer mechanisms are the appropriate way to make your web
    service a client to another web service and are very useful to provide polling
    mechanisms. Look at slides ADVC 9-11 to see more.

    Step by step, how did you arrive at seeing this agreement?

  • Mission Control lagging? Use xbench!

    What worked for me to fix mission control lagging (after upgrading from SL) was to run the xbench graphics test a few times. That's it. It worked perfectly!
    get it here: http://www.macupdate.com/app/mac/10081/xbench

    Thanks so much for sharing this. This issue started more than a year ago. I looked for solutions everywhere but never found anything that worked and finally gave up. Never used Mission Control anymore after that.
    A few days ago I got a new MBP and after migrating my apps and data from my old Mac, the issue with Mission Control also migrated to my new laptop.
    This solved my problem in my old mac as well as in my new MBP.
    Thank you!

  • Mission Control useless when using multiple monitors

    Background:
    From my iMac I'm watching NetFlix on a 2nd TV/Monitor. The movie is playing....   On my iMac I switch to another space.  Bam!  The movie window on the other monitor is gone.
    Conclusion:
    Using Mission Control and changing "spaces" does so on all attached monitors. This is not good.
    Need:
    There needs to be pref in "monitors" control panel to "exlude monitor from Mission Control" functions.
    Frustration:
    Grrrrrrrrrrr!   No more "Mission Control" as long as I'm using more than one monitor.
    What say Ye?

    Yes, mission control is a completely abomination on multiple monitors... I use a 4 screen setup, 1 of them is a 140 projector for movies... so i definitely understand what you mean about the movie issue.... MC isvery very limited in what could potential be a step up from Spaces... instead is a step backword...
    1. no way to lock monitors (such as you are talking about with watching a movie)
    2. no way to move windows from one desktop to another... Spaces was great for organization... MC is a very dumbed down version.
    3. Spaces showed all "desktops montitor groups together" where the way MC splits them seems unnatural and odd to me... makes sense on single monitor, but horrible on multi monitors
    4. Full screen apps are worthless with multiple monitors... it should give me the option to do full screen app on EACH monitor... this would definitely ogranization.

  • JMC flight recording code analysis

    Hello,
    I am having trouble understanding my flight recording of an ADF application. I have profiled an ADF app built in 11g R2 running on a stand alone server. The JMC recording returns everything it should.
    I need to know how to analyze my ADF methods to address problem areas to increase performance.  The majority of the code being recorded are java methods and not instances of my ADF app. How can I better understand what's going on so I can tweak the code for better performance results?
    Thank you,

    I'm working on trying to understand the mission control output a bit better with OP up there.  We have watched the youtube series from Oracle called Java Mission Control and Flight Recorder Demo Series, among a couple other videos, blog entries, etc.
    We originally tried to use VisualVM but had difficulty getting it running remotely, so we switched to JMC.  When we ran VisualVM locally though, we were able to add filters to the output to get rid of certain classes, allowing us to concentrate on the packages that were directly related to our application's code.  For example we did not profile these packages:
    java.*, javax.*, sun.*, sunw.*, com.sun.*,org.*,groovy.*,groovyjarjarantlr.*,org.*,ice.*, kodo.*,netscape.*,shemacom_bea_xml.*,weblogic.*,commonj.*,oracle.*
    I see that there is a filter field in some areas of mission control, but if we put in our package prefix and a wildcard we only get like 1 result.
    Is there any output that we could provide that would help illuminate this further?  Thanks!

  • Hotspot JVM and Mission Control Availability

    Hi,
    I've read in a lot of places how Flight Recorder is now supported in JDK 7u4 and up. Following some excellent posts on various blogs (ex: http://hirt.se/blog/), I've been able to run a few captures. However, I've run into a number of stumbling blocks:
    1) Despite all documentation I have read, I have yet to find any HotSpot release that contains any jfr recording templates. They are usually reported to be available in jre/lib/jfr but this folder is inevitably absent from all releases I've checked. Any idea why that is?
    2) I have read many mentions of Mission Control 5.x (there appears to have been a few releases), but it's nowhere to be found. Mission Control 4.1 is publicly available, so I expected/hoped 5.x to be as well. Maybe it's not? Any plans to make it available?
    3) Using MC 4.1, I can open the JFR report, but no stats are available aside from Thread start and end events. The output file itself being binary, I'm not sure if it's because other events are not captured (I tried a variety of templates), or because this version of MC does not recognize them. Any suggestions?
    Thanks!
    Sebastien

    Well, should anybody stumble upon this with the same question, here's some additional info:
    Java Mission Control has its own forum: Java Mission Control
    It also has its own twitter account: https://twitter.com/javamissionctrl
    From all evidence it looks like it's still not available unless you have an active support contract. As for the release date, it looks tantalizingly close. I wish it would be available in some sort of beta mode.

  • How can I fix Dock/Mission Control/Launchpad? (Glitch)

    General Description
    Mission Control and Launchpad glitch when invoked (whether by using the mouse or trackpad gesture). They seems to crash or quit, and then relaunch themselves (/itself - all the same app?), I know this because:
    they both, as well as Dock, become unresponsive;
    the desktop background images disappear temporarily (being replaced by blank light or dark grey);
    the Mission Control animation stops/freezes and does not execute properly (the windows stay still);
    Dock becomes unresponsive as well as Launchpad.
    This happens a lot (every other invokation) and seems to be random; it's annoying and is ruining my workflow, since I am a heavy user of multiple desktops.
    Behaviour
    I usually have over ten desktops, all with active apps open at one time; when it glitches I can't even open or switch applications, though I can use the ones that are on the current desktop (if was trying to use Mission Control).
    There is no correlation with the glitch and the amount of applications open, or how much RAM or CPU is active (still happens with only a few light apps open and a few desktops).
    It does not matter whether I am using more than one monitor, the glitch still occurs.
    It does not happen due to a particular open application, as I have tested with nothing open at all straight after a restart.
    Possible and tested causes
    An application might be corrupting the glitchy app(s), since the disk breaks after being repaired in Safe Boot mode. Once the disk has been repaired, the glitch doesn't seem to occur until a few applications have been opened, though I haven't tested this much. (I am suspecting TheBrain, but not sure. Other potential culprits: Chrome, Mail, Firefox, Spotify, Skype, Dictionary, Activity Monitor, Finder).
    It isn't the operating system itself because I have reinstalled it from Safe Boot mode, and yet the glitch persists.
    The application(s) affected by the glitch may be corrupted, and need reinstalled - that is, if they weren't already by reinstalling the operating system (they are in the '/System/CoreServices' folder).
    Not-so-possible:
    I doubt it is a virus - it would be a pretty pointless glitch for one to cause.
    I have Time Machine running most of the time, but I have no reason to believe that is the cause.
    I am using a NEET mini display port to HDMI adapter for my second monitor (no idea how that could be causing the issue).
    Help
    Any ideas on what I could do to fix this?
    And does anyone know how to reinstall Mission Control, Dock and Launchpad (I think they are all part of '/System/Library/CoreServices/Dock.app')? This might be worth a try.
    Specifications (just in case)
    2010 Macbook Pro
    2.8 GHz Intel i7
    8 GB memory
    500 GB HD (two thirds full)
    Thanks for any help!

    One thing I'd like for you to try: Create a new user account. Log into the new account and see if the same problems persist.
    Many times such crashes are the result of corrupted preference or cache files. The above will eliminate these in the user account but not at the system level. So, I suggest you use a utility such as Lion Cache Cleaner 6.0.11 or Purity 1.10 to clear out cache files at the system level. I've never used the latter software but I, personally, use the former one on my computers.

  • Desktop background disappears, Mission Control doesn't work correctly

    Sometimes it happens that my desktop background completely dissappears, and Mission Control stops working as well.
    It seems to happen when I open a new window in a fullscreen app (like Safari), and while it's opening I switch to another space.
    Whenever this happens, my desktop changes to the Dashboard background, and Mission Control doesn't show the other spaces anymore (but you can see active windows in your main space). I've added pictures below.
    I can still swipe between spaces, my dock still works and all apps still work in all spaces.
    Any way to fix this without rebooting? To avoid this happening (apart from me being more patient)?
    This is my desktop at the moment:
    And this is Mission Control:
    I am using: Macbook Pro 5,4
    OS X 10.7.1
    2,53 GHz Intel Core 2 Duo
    4 GB 1067 MHz DDR3

    I am experiencing the same thing as most of us, exactly as explained by - Acid_Raccoon.
    UK-Max - This is not just a specific problem involving external screens. The dissappearing wallpaper, and loss of function of mission control (do not show spaces, but you can click in empty area where it should be located and it actually works as normal) occurs also when there is no
    external screen input involved - You have to restart computer for it to return to normal. As a matter of fact, I am experiencing it right now for the 10th time in 1 week period, and it´s quite annoying. I would guess more than just a few people are experiencing this, and as postmechanical mentioned about having a brand new computer - this shouldn´t occur, and if so should get a fix immediately.
    Over time, I have experiencing other system problems produced from installing OS lion. Sure it deliver a few smart, and smooth features, but since more and more bugs are discovered (and not fixed by apple), I am considering returning to snow leopard. For instance, sometimes when my computer goes into screensaver, it can shift to a picture of pixels (black&white) in 4:3 screen ration. This has never occurred before installing Lion. Another thing which is extremely annoying is that since installing lion, my computer refuses to go to sleep when I close my lid. Nothing happens, and it just stays on. I have to manually select in apple-menu to sleep.
    I really hope Apple take these notes people have mentioned in this forum (and others) seriously, and fix them. I really hope Apple show more custumer service-spirits, than Apple´s lack of hardware-quality. (I have owned 4 apple computers(1 powerbook G4, 1 macbook & 2 macbook pro), brand new, and 3 of them have experienced hardware-failure on more than one occasion in less than a year. The one that didnt required service was my powerbook G4 titanium, released in 2001, and kept going for 4 years straight without any problems.) (Actually, the last one experienced 3 times in-a-row mother-card failure). I only go for Apple´s products due to its smart and clean features (and seriously PC is not an alternative if you want to stay mentally healthy), but what I´ve been reading on multiple forums over the web, more than a few, experience occuring hardware problems with their Apple computer.
    I guess this is the result of Apple trying to push for higher revenues. If Apple keep go in the same directions as it has been doing in the last 4-5 years it will be its doom, and loose the customers that once caught the Apple-wave due to it´s innovative and personal aspect, but most important - it´s superiour quality it once had! Apple´s products is quite expensive, and thus should be combined with its smart and innovative system, along with lasting quality. But if $ revenue is the only thing that keep Apple going nowdays, and produce smart product that is meant to last for only 2-3 years maximum, it is deeply disturbing and the company will loose track of what stevie was initially producing - clean, smooth system (just works, no migraine), with everlasting quality far seen in PC-world. Apple - please consider !

  • Macbook Pro Freezes After Activating Mission Control

    I am updated currently to 10.7.4, and I am having a problem that could not be duplicated after a 4 day stay at my local Apple store. Basically the computer freezes up and becomes unresponsive. The last two times it has happened, I noticed (Possibly a time or two before) it was right as I was activating Mission Control. I use Mission Control as a hot corner and right as the mouse hits the corner to activate it, the computer screen shuts off and I have to do a hard reset holding the power button down to get it back. If the keyboard was lit up at the time the computer goes down it stays lit up, and the fans continue to run, but I cannot get it to do anything. I thought maybe the screen was the only thing off, but the volume buttons do no make the sound associated with raising and lowering the volume. I shut the lid and open it, but the keyboard stays lit up even when it is down. The Macbook is just off in la la land.
    I should also add that I upgraded the RAM to 8g in April and I had absolutely no problems before. The RAM tested out fine according to Apple even after a deep lengthy scan. I bought the RAM from Crucial and I am sure it is the correct RAM for my computer. One would think even Apple should have told me if it was not the correct RAM, or the computer just plain would not work. So I am at a loss as to what the problem is.
    As a last thing, both of most recent times this happened, the computer had not just been woke up, but maybe 5-10 minutes after being brought out of a lengthy sleep maybe 3-4 hours or so. Or it seemed like this was the case.
    Thanks in advance....

    Hi Muddy Angel,
    i'm just wondering if you managed to get a solution to this problem.
    i'm expiriencing the same problem for the past one year and can't seem to find the problem.
    the screen goes black usually when the mission control is in use, it happen to me when using hot corners, trackpad gesture or even the function key (F9), on either the macbook screen or external display.
    the problem seem to be connected somehow to the finder as it some rare times occur even when shifting windows between spaces.
    i tried several forumes and didn't find the solution.
    i reinstalled OS 3-4 times and still no solution, i recently upgraded to the latest OSX Lion hoping that this might fix the problem but the problem still exists....aaarrrrgggggggg
    this is extremely extremely extremely frustrating, as sometime in the middle of a meeting or presentation the macbook goes black and need 5-8 minutes to restart it with all the other apps.
    if you did find an answer P L E A S E let me know,
    Thanks in advance.

  • Problem with mission control after 10.7.2 update

    After I updated to 10.7.2, when I swipe into mission control then select a different app with the spacebar then swipe back out of mission control, the menu bar on the top does not switch to the new app, it stays as the previous open app. But, if I click on the new app instead of using the spacebar then the menu bar switches correctly. Is anyone else having this problem?

    I have had the same issue since initial 10.7.0 install.  Doesn't seem to affect function at all.. but disconcerting nonetheless.  I have yet to find anything acknowleding the problem or how to fix it. 

  • AD4J vs. Mission Control

    Can anybody tell me what I can see more with AD4J than Mission Control. We use Mission Control to monitor our production environment, we do this already more than a year and it was already helpful a lot for us.
    In the beginning our WebLogic (or better VM) crashed a lot because of bad memory tuning. After tuning the VM (with help of Oracle consultants) and the code the crashing has disappeared. Then we still had major garbage collects that took more than 40 seconds (stop the world GCs) about 1 every hour. After tuning again, we now have major GCs of maximum 10s (5 a day), 7s (a few every hour), and lots of less than 2 seconds.
    Now our question is there a way to see what is happening (at code level) near those 10s GCs because we see these GCs happen near heavy CPU usage of the VM (so we think heavy business logic). Because our application has 20 EJB modules, 400 entity beans and at peak periods near 1000 concurrent users using a Swing client connected to this single WebLogic instance it is complicated to find out what is happening.
    The find a solution the local Oracle people suggested we have to use AD4J to find out what is happening. But before we starts evaluating this tool I want to know whether anybody has any experience using and Mission Control and AD4J and how they relate to each other.
    Tnx
    Bjorn

    That is true, we did already some recordings this helped the Oracle consultants in the first tunings, but what "triggered" the GCs is not what is causing the heavy CPU activity. Something needs a bit more heap and the GC is started but this is not what the garbage generated.
    What I really want to know is there an easy way to follow business logic activity, and so find out hot methods.
    Regards,
    Bjorn

  • Is it possible to specify MLS port in Mission Control Eclipse plugin?

    I'm running the Mission Control plugin in Eclipse to manage a remote server behind a firewall. I'm able to run the JRockit console, however I am unable to run Memory Leak Detector. It seems I need to specify the MLS port, or I need to turn off the firewall to allow the MLS to use a random port. Turning off the firewall is not a option.
    Is it possible specify the MLS port in the Eclipse Mission Control Plugin? I can't find anywhere to do. Is it possible to somehow include it as part of the Custom JMX URL?
    FYI, I have to use the Eclipse plugin because I'm working on OSX, and that seems to be my only option.

    You should be able to specifiy which port is used for Memleak in the Mission Control preferences,
    Mission Control/Memory Leak Detector/Communication - Use fixed port
    If you can't see those prefs, which version of Mission Control are you using?
    Klara, Mission Control dev

Maybe you are looking for