JDS Roadmap

Does anyone know the roadmap for JDS ? From my point of view, JDS Release 2 dropped in May 04. Since then, Novell had dropped NLD, as well as, openSUSE(beta) the Fedora competition. Mandrake bought Connectiva and is now Mandriva, Fedora 4 is out, there are even newer kernels, and KDE/GNOME. The company lagging behind appears to be Sun with JDS. Where's SELinux in JDS ?
It appears that once Novell bought SUSE, Sun JDS, which is using SUSE, died.
Where is Sun in updating or even bothering with JDS on the Novell SUSE? The way I see it, Sun was so focused on Red Hat, they didn't expect Novell making a splash like they did. I think the only lifeline JDS has is LookingGlass.
I can't see any reason to stay with JDS when 1) it cost $ to obtain, 2) its not keeping up with with the Linux community 3) competitive desktops are available.
Input/thoughts ?

JDS development continues, though it is increasingly focused on Solaris. To see how GNOME 2.10+ based JDS is progressing on OpenSolaris, browse this forum: http://www.opensolaris.org/jive/forum.jspa?forumID=39
Looking glass development also continues. Versions are available on Solaris, linux and other operating systems here:
https://lg3d-core.dev.java.net/lg3d-getting-started.html
I understand that SELinux has some interesting and useful features. But as far as I know, it does not have the certifications required to run in certain secure environments. It would be interesting to see a comparison of the features provided by SELinux and Trusted Solaris, especially now that containers (zones) are part of Solaris.

Similar Messages

Creation of a Multi-Year Product Roadmap in Project 2010

I am looking to see if I can efficiently create a product roadmap using Project 2010. For a given business unit in our corporation I have product categories and under those categories I have products and/or projects I want to show on a timeline. I
was able to brute force this into a timeline but I would think there is an easier way to do this.
For example, I would like to be able to put the description of the product/project inside the bar on the ghantt chart but I get an error when I try to do that. I increased the bar height to allow for legible text but still no luck.
I want each entry for a given product category to automatically produce a bar of the right color with starting and ending symbols as needed based on the type of entry I add (product versus project).
Is there any way to add an outline to the bars of different colors to designate the difference between a sustaining, anticipated, active, and discontinued product or project?
Or would I be better served to go find an aftermarket piece of software that will do this type of work instead of trying to use MS Project for something it wasn't specifically designed?
Thank you for any feedback.
Andy

Hi Andy,
Here is a
tutorial that might help you coloring your bar style. This is based on the resource name but you could have a custom field with your product category which trigger a flag then the bar style will be formated
based on the flag.
Then about the description in the bar, I'm afraid this is not intended for this purpose. What about the note fields?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Using roadmap and select-options

I'm new to abap web dynpro, i'm using a roadmap with 4 views. This is working fine but, when I try to use select options in view1 they don't show. When I set view1 as default view the select options are working fine.
this is how my current web dynpro looks like:
Main view -> roadmap with viewcontainerUIElement
    view1 -> viewContainerUIElement + table (in the window I embedded the select options in the viewContainerUIElement)
    view2
    view3
    view4
In view1 I'm using wddoinit to initialise the select options.
Thanks in advance!

Hi Srinivas,
According to you mail, I will provide some solution please try them. It will definitely works.
---> Create a attribute which holds the lead selection values of the RADIO_GROUP.
---> When you click on the Next View, You will fire the plug. Right. Just before firing the Plug, update the above
      attribute with update information.
> Do the same code for Select-options code in the WDDOINIT except the passing the values to the select-options.
> Please pass the attribute information to Select-options with updated information in the method WDDOMODIFYVIEW every time. Without creating a attribute also you can approach the same method. Just for simple access we can create a attribute. Otherwise without that we can do the same.
So Just populate the values into Select-options depending on the value of RADIO_GROUP you will do the same coding WDDOMODIFYVIEW. But initialization of SELECT-OPTIONS can be only done in the method WDDOINIT method only. WDDOINIT method only execute first time once you go through it and go back and move forward then this method won't execute.
I hope this logic will work for you. If not Please send me the Code related to SELECT-OPTIONS and RADIO_GROUP Button information.
I will be in office today up to 4.45 PM (IST). You can contact me in this time otherwise we will discuss on webex tomorrow morning at 9 AM.
Warm Regards,
Vijay

Problem with application directories on JDS - Solaris 10 11/06 sparc

I am running a fully patched JDS on a Sun Blade with Solaris 10 11/06 sparc.
After installing, removing, and re-installing Sun Download Manager 2.0 (web start version) I am having problems with JDS application menus.
I used File Manager (probably accessed through the This Computer Desktop icon) to move around directories under applications:///. This information is saved in ~/.gnome2/vfolders. Folders available from the Launch menu under Applications were all messed up, but I solved this problem by removing all contents of ~/.gnome2/vfolders and restarting JDS.
Now, when I enter the This Computer icon on the Desktop, and click on the Applications icon in there, there is an extra Applications icon there that is not associated with any application and cannot be removed (when I try and trash it, I get an error saying something about "not on same file system"). Also, when I enter the Internet folder under Applications, there is an extra Internet icon in there that also cannot be removed. These extra folders are not seen when accessing the Applications menu from the Launch menu. How can I clean up these "bad" launchers, or folders, or whatever they are, that appear to exist only under the Applications directory accessible through This Computer (computer:///)?
Thank you...

Maybe the answer is here:
http://docs.sun.com/app/docs/doc/819-0918/6n3aglfdl?l=en&a=view&q=location+of+applications-all-users
To Add a Menu Using Menu Files
To add a menu for all users, perform the following steps:
1. Create a directory entry file for the item that you want to add. Create the directory entry file in the /usr/share/gnome/vfolders directory. For more information about directory entry files, see Directory Entry Files.
2. Locate the vfolder information file for the location where you want to add the menu. For example, to add a menu to the Applications menu, locate the file /etc/gnome-vfs-2.0/vfolders/applications-all-users.vfolder-info.
3. In the vfolder information file, add a <Folder> element for the new menu. For more information about vfolder information files, see Vfolders and Menus.
The next time users log in, the menu is in the assigned location.

Crystal Report installation roadmap

Hi All,
I googled and found that the the SAP data can be extracted only if SAP BW is configured. We have a different requirement
InfoSet Queries are developed, which extracts data from SAP tables
We need to customize the design of the report, therefore plan to have temporary extracted data in InfoSet query and
install and integrate Crystal Report with Infoset Queries for customizing the layout.
Are our concepts correct about crystal report? If yes, how can we integrate CR with SAP, keeping in consideration that we haven't implemented SAP BW.
In short, installation/configuration of the following scenerio
SAP Tables -> InfoSet Query -> Crystal Report -> Custom Layout with Infoset Query data -> Print
Thanks in advance.

Thank you Ingo for your valuable response. Infact, I'm a big fan of your blogs @Business Objects.
Actually, the objective is to design reports with customized heading without using ABAP. For the purpose, InfoSet queries are created. Now I'm looking for a tool, e.g. Crystal Reports etc., to design queries output in professional way.
What do you suggest, which product should I opt for temporary purpose? We will be acquiring BOBJ in next fiscal year, which I hope will make our life easy for developing/designing new reports. But at current, which product/roadmap should be focus on?
Thanks !
BR

Visual Composer 7.0 roadmap

Hello experts,
We have NetWeaver EP 7.0 installed with Visual Composer in our C&B and DEV environment. We haven't started developing with it yet.
My questions to you is:
What is the future of Visual Composer 7.0?
My understanding is that SAP has put a lot of energy integrating Visual Composer into CE 7.1. This new version has significant changes compare to it's predecessor. Visual Composer for CE 7.1 seems to be the way to go if one needs to create applications based on existing data services. In short terms, both versions will coexist. Bbut in long terms...?
Can anyone help me find the Visual Composer roadmap?
Thanks a lot for your help,
Nathalie

Hi,
This is a quote from the Visual Composer main page on SDN: (/people/jarrod.williams/blog/2009/09/14/whats-new-in-visual-composer)
"_Visual Composer 7.0_
In light of the progress made relating to parity between Visual Composer 7.0 and Visual Composer CE, our investment in Visual Composer 7.0 will be limited to maintenance after the release of enhancement package 2 for SAP NetWeaver 7.0. We are confident that with the provisions made for migration to Visual Composer 7.1 enhancement package 1 or Visual Composer 7.2 and the great feature set in Visual Composer for enhancement package 2 for SAP NetWeaver 7.0, our existing customers running Visual Composer 7.0 will enjoy the best of both worlds: the option to upgrade to Visual Composer 7.2 or to stay with the latest release of Visual Composer 7.0."
I'll stress the last part, though VC on CE is a great version, staying with the latest release of Visual Composer 7.0 is also good, depending on your needs of course, for instance - the attractive Flash runtime which is currently exclisive for VC 7.0, the "Flash Components" feature that was entered on SP5 of 7.01 (and in 7.02) , which enables you to consume custom 3rd party flash components or Xcelsius controls inside Visual Composer,, which makes flash black-boxes easier to consume than in CE, .. etc..
still - VC on CE of course has it's own advantages - the ability to consume clustered services, life-cycle management, it's intergration with the other CE components etc..
and so if you'll find that VC 7.0 is not enough, you could always upgrade and migrate to the CE versions (7.1 or 7.2).
bottom line - it's a win win situation.

What is the roadmap to a new comer in java technology?

Can some one define and explain the roadmap for a new comer who has just formal experience of using computer and keeps only basic knowledge about computers and computer programming? A new comer's mind is boggled with so many unkown terms. Can someone sort them out to make understand simply? What a new comer should know before dipping into the java technology and what must be learnt sequentially?

Take a look at these. Pick the one or ones you like.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

View in Roadmap

Hey Guys,
I have a question concerning the Entry view when you use Transaction Code RMAUTH.
I can see my self created Roadmap, but what I try to do is, upload a document (anyhow) which will be shown on the right side directly.
There are two folders (Documents and Documentatributes). But with both I could not upload an existing document which will be shown directly. I will do that for any node or subnode on the left side.
Always when I try to creat or assign one I got the message (Enhancement/KWCUST/(Release610) does not exist.
I hope I have clearly descriped what I need.
Thanks in advance for your help.
Guersel

Hi,
You are trying to upload docs in the SAP namespace which is not permitted in that system

Any roadmap to have to Lync client for Blackberry 10?

...with full feature support of course (phone, video, presence,...).
I know there are still some challenges like at current time with BB10 OS (like you must keep you app in an active frame), but these limitations will soon go away with the new OS version (http://devblog.blackberry.com/2013/05/blackberry-jam-headless-invoke/?CPID=E10C020,
new Background Services framework which allows developers to bundle a separate process with their application to run in the background without a UI)
The Lync for Mac version still lacks of some critical phone features not being implemented (delegate support, team-call group members, wireless QoS tagging 802.11e,...)

Hi,
There is currently no Lync client available for Blackberry (RIM) devices. Sorry to say I also did not find any roadmap about lync for Blackberry 10.
Kent Huang
TechNet Community Support

Error in Preprocessing Roadmap step JOB_RSUPDTEC_SHD aborted

Dear All,
We are upgrading our server from R3 4.7 to ECC 6 EhP4. Our OS is AIX and database is DB2 9.5.
during Preprocessing Roadmap step JOB_RSUPDTEC_SHD aborted. This job run in phase JOB_RSUPDTEC_SHD on shadow system. We are getting the dump in shadow system
Runtime Errors         DATA_LENGTH_0
Exception              CX_SY_RANGE_OUT_OF_BOUNDS
                                                                                |
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "MODIFY_TABSPACE_DB6" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "RSUPDTEC", the system attempted to access the field
"DATA_TBSP_NAME" using the length 0.
However, a partial field access with the length specification 0 is not
|    allowed.
We have upgraded our kernel, dp_wp, R3trans, tp of 620 and 701 to latest avaliable. But still the problem cannot shortout.
ON seeing SAPUP log file PSUPDTECSHD.LOG we got this information
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ010 Date & Time: 20101018143359
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ230 Starting RFC Login to: System = "PRD", GwHost = "haeccsbx", GwService = "sapgw01"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ233 Calling function module "subst_start_batchjob" by RFC
4 ETQ399 JOBNAME='RSUPDTEC', REPNAME='RSUPDTEC', VARNAME='', BATCHHOST='haeccsbx', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20101018143409
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPDTEC\.PRD"
2EETQ262 Batchjob "RSUPDTEC" aborted
4 ETQ359 RFC Login to: System="PRD", Nr="01", GwHost="haeccsbx", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
4 ETQ359 RFC Login to: System="PRD", Nr="01", GwHost="haeccsbx", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
By analysis its seem that this is data length error but not able to understand how to solve this as we are using standared sap method of upgrade.

Hi Pritpal,
Please check note 1474361
Also you can update the system with latest database library dbdb6slib.The library has to be updated
for the SHADOW system in directory <upgdir>/abap/exe (and
<upgdir>/abap/exe_new as well) .Put the 7.01 version of library.
Regards
Ashok Dalai

How to skip first step in a FPM roadmap?

Hello, Our client wants the first step disabled/not displayed in a standard roadmap that has been delivered with the software. The standard roadmap uses component FPM_GAF_COMPONENT and consists of 4 steps (and is based on an application config and component config). They want to directly display the second step with certain values in the second screen pre-populated from a custom application (the second screen would in normaly flow be populated from first screen). So I have two tasks:
1) disable first screen/step
2) populate second screen/step with data from custom application
This is my first exposure to FPM and roadmaps. I tried deleting the first step from the component configuration and making the current 3 step process into a 3 step process, but this does not work and did not seem to be the way to go. On looking around I see some documentation for methods HIDE_MAINSTEP to be used thru IF_FPM_GAF interface, but am not sure where to implement this interface or what code to use in the method.
Can anyone provide step by step suggestions and examples of codes please?
Thanks,
Zack

Thanks Harish.
I was able to get to the HIDE_MAINSTEP method. However, when I try to hide step 1, which is my requirement, there is a short dump. If I hide step 2 or 3 out of the 4 step process, the sequence of screens is showing up appropriately. However, when I hide step 1, there seems to be some problem in mehod WDDOMODIFYVIEW of view CNR_VIEW of component FPM_GAF_COMPONENT where in a loop for the first loop pass, even though step 1 is hidden, the code is trying to access the road_map_step element which is not instantiated. We have opened a note for this issue.
Zack

Upgrade ASAP roadmap content in Solution Manager

Hello,
Does anyone of you know how to upgrade the ASAP roadmap content in solution manager?
Current we have solution manager 4.0, SP12. The version of the ASAP roadmap content is V3.6 (Dec. 2006). We currently found from the service marketplace the lastest ASAP implementation roadmap (V3.7)
https://websmp106.sap-ag.de/roadmaps.
Is it possible to somehow "upload" this new version into Solution Manager roadmap to replace the older version? Or how should we get the roadmap content upgraded?
Many thanks for your input!!
Regards,
Li

It is delivered in ST-ICO SAP Solution Manager Implementation Cont. Ver 3.6 is in SP11, I would imagine V3.7 is in SP 13.
You would have to up your service pack or use the standalone one until then.
Derek

OnPlus Top 10 and Roadmap - What do you think?

Thank you all so much for your great feedback! During the past few months, we’ve met and talked to quite a bit of you on shows, events and here on our Support Community, and listened to your comments and requests.
Following these discussions and the feedback given on our previous announcement on our Top 10 list of features (here), we internally got together to think of ways on how to address those in our roadmap, so we’re happy to share our plan with you here.
And as always – comment away! You’re feedback is most valuable.
Coming soon…
Here are the features we have planned for the next few months out…
More supported platforms – as you requested, we’re looking into adding support for more Cisco products. Mainly we are looking at adding support for the following:
Catalyst 2K and 3K Switches
Additional ISR G2 platforms
Co-Branded OnPlus – many of have told us how cool it would be if you could demonstrate your managed services to your existing or prospective customer, with your logo on it, so you can create more of an identity for your company. In the next few months, we’ll be working on a Co-Branded service. You will be able to upload your logo to OnPlus, and we will populate that on the portal and in OnPlus reports.
Telnet/SSH – this feature was on our previous Top 10 list, and we kept it here, not only because many of you asked for it, but also since we’ll be adding more Cisco devices with a CLI.This feature will enable you to create, through OnPlus a Telnet or SSH tunnel directly into the device you’d like to manage, with the same experience as you could connect to a device’s GUI.
Customer Access to OnPlus – soon you’ll be able to invite your customers to (only) view their accounts on OnPlus, so they can stay up-to-date with your service.
Multi-site/network management – many of you have customers with multiple sites, but now, each is represented as a separate site.
We’ll be working on a more consolidated view, where you’ll be able to manage customers with multiple networks in an intuitive manner. More to come on this in the future…
Wireless Practice – reports dedicated to the wireless network in your customer networks will be coming as part of an offering linked to new Cisco Access Points coming in the spring.
Device Credentials Test – when you enter credentials for a device in its window in OnPlus – we’ll test them for you and let you know if they’re correct or not.
Turn off monitors on selected devices – Since many of you use an RMM, we’ve heard this request quite a bit – can you turn off the monitors on only a selected number of devices or category? This feature will offer you the ability to configure which devices will, or will not be monitored.
More on PSA integration – we’re looking at a deeper integration both with Autotask and Connectwise, mainly in the ticketing system:
Upload device configuration into the ticket – for a failed device, we will upload the last device configuration to the ticket, for your convenience.
Embed a device window link in a ticket – in any ticket that’s opened, a link to the failing device’s window wll be provided so you can open it directly through your PSA.
ISP Speed test – here you will quickly be able to gauge how your service provider is doing, as more means to troubleshoot from afar.
Other features coming in the pipeline:
Here are some more features we will be looking into in the upcoming months, but will be noticeable only later on. Some have remained from our original list, and others have been added following your feedback.
Network Assessments - placing the ON100 network agent at a potential customer site and running a network assessment can give you enough information about that site, in order to give your prospective customer a proposal. This could be especially useful when using a tablet at that customer’s site, and showing the results on the fly.
Network Health dashboard – a dedicated health tab will provide you with details regarding your customer network, as well as some more troubleshooting tools you can utilize for further investigation
OnPlus recommendations - receive recommendations from OnPlus that pertain to the devices on the networks you manage – from notifications on configuration adjustments to promotions and suggestions. This could be a great way to initiate a discussion with your customer on additions, changes, replacements and much more.
RMM Integration - we are looking closely at integrating functionality with the some Remote Management and Monitoring tools, mainly Level Platforms and Kaseya. More on that to follow…
IPv6 – for networks that have already adopted, or are beginning to adopt IPv6 - OnPlus would discover, assess, manage and advise you, same as you know it today.
Managing different subnets and VLANs – we are looking at ways to discover other subnets and VLANs other than the one that the network agent is on.
Access privileges to agents - when adding a sub-agent in your account on the OnPlus portal, you'd be able to assign different privileges for each agent, per customer. Meaning, if agent 'John' supports customers A, B and C, and agent 'Jane' support customers X, Y and Z; John would have Read-Write access to only A, B and C but Read-Only access to X, Y and Z and vice versa for Jane. It would be up to the master agent to determine this privilege allocation
More integration with Cisco Services – through OnPlus you’d be able to see your active Service Requests and RMAs and their history, and also file for an RMA through OnPlus.
Extension of Service contracts and Warranty – we’re looking at ways for you to extend your service contracts and warranties through OnPlus, without the need to call Cisco or your distributor.
As always, please don’t hesitate to let us know your comments, thoughts and wishes. We listen to everything!
Thanks,
The OnPlus Team

As a T&M and managed services provider for the small business market (average business customer has 1 to 5 locations and anywhere between 2 and 50 total devices, including computers and printers, per location), we are looking for a drop-in one-box does-it-all type of management and monitoring device. With this said for perspective, here is the my reaction to the proposed Top 10 list.
"More supported platforms – " The full line of Cisco "Built for Small Business" Routers/Firewalls, Switches, Unified Communications, and Wireless Access Points should be supported fully by OnPlus. These devices should be able to store their configuration files and firmware on the device. Support for these devices should take precedence over supporting Cisco Enterprise Grade hardware because the OnPlus device is billed as a small business network management product.
"Co-Branded OnPlus –" This is a good idea, but additional reporting capabilities and full line of Cisco "Built for Small Business" product support should take priority over Co-Branding.
Telnet/SSH – I'm not sure I understand this is a new feature. We are currently able to use the generic connection capability to connect to Telnet and SSH.
Customer Access to OnPlus – We should be able to provide customers with either read-only or full-control access to their network as our contracts stipulate. We have some customers in both categories.
Multi-site/network management – This feature will be very helpful to our customers that have some on-staff IT support.
We’ll be working on a more consolidated view, where you’ll be able to manage customers with multiple networks in an intuitive manner. More to come on this in the future… -- Waiting to see the details
Wireless Practice – Good to know.
Device Credentials Test – We are looking forward to receiving instant feedback about whether a device has proper credentials (please include snmp in the credentials test) or not.
Turn off monitors on selected devices – Yeah!!
More on PSA integration – I'd like to see integration with Spiceworks in addition to the items below.
Upload device configuration into the ticket – for a failed device, we will upload the last device configuration to the ticket, for your convenience.
Embed a device window link in a ticket – in any ticket that’s opened, a link to the failing device’s window wll be provided so you can open it directly through your PSA.
ISP Speed test – here you will quickly be able to gauge how your service provider is doing, as more means to troubleshoot from afar.
There are some things that are important to our customers that aren't on the top 10 list. Here are some of those items.
A. More network health reporting options and graphs. It would be nice to be able to run a report that prints out the network Latency and Jitter and Packet Loss metrics that show up on the OnPlus' Wan Monitor Tab. It would also be nice to include an accurate WAN speed graph in the same report. It would also be nice to run reports on supported switches that show packet errors, Spanning Tree misconfiguration, etc.
B. Configure the OnPlus Device to act as a syslog server
C. Im in agreement with some of the thoughts above about being able to capture more WMI data and/or event log/syslog data for Windows/Linux/MAC devices and provide some reporting options for that data. Our clients have a limited budget, so anything we can provide for them in a single drop-in appliance in the realm of network and device management is appreciated.
D. Voicemail backup mentioned above is a great idea
E. Support for Spiceworks Ticketing/Reporting Integration
F. Additional support for non Cisco Devices -- Most of our cleints have heterogenous networks, so being able to support devices from multiple vendors is important. Being able to back up the network config of any SNMP capable network device could be very beneficial.
G. Selective VLAN listening scope from the OnPlus. Reduces the amount of switch configuration needed to deploy the OnPlus in environments where we only need to monitor devices on some VLANS.
H. Selective global enablling or disabling of remote device connectivity for a customer's site or sites.
I. Ability to connect to multiple remote management sessions concurrently from the OnPlus. This and #H could work together to enable a range of remote connectivity options between maybe 0 and 5 concurrent sessions and could possibly be a factor in service level pricing to the customer. And, a report could be created that showed the customer the times when someone accessed their devices remotely through the OnPlus.
As for general direction for the OnPlus --- I hope it doesn't go down the road of only or primarily being a management device for Cisco Enterprise IOS based products. There appear to already be specialized Cisco Management products available for the Enterprise IOS based line of products. I want to see OnPlus continue to support Service Providers who have clients on the smaller side of the SMB market. In the part of the country where we work, the SMB clients, simply don't have resources for Cisco Enterprise IOS products, so it is great be able to offer a low cost drop-in appliance that fulfills general network and device monitoring and management needs.

How do you patch JDS 5.2 and keep it working?

Does anyone have experience patching Java Directory server 5.2, the package installation? I tried patching from base JDS 5.2 to JDS 5.2 P4 by applying these patches....
118615-01
115610-23
115614-26
Now the directory server won't start..
$ directoryserver start
ld.so.1: ns-slapd: fatal: libsoftokn3.so: open failed: No such file or directory
Killed
Server not running!! Failed to start ns-slapd process.
Does anyone have any idea what to do to correct this issue? I have the library, and I've tried various ways of placing it in my library path (LD_LIBRARY_PATH, copying, linking) to no effect.
--Mediis

You also need to install the patches for the Shared Components used by
Directory Server 5.2 (and the patch number depend on your version of Solaris).
Since you're mentioning 115610-23 and 115614-26, I assume Solaris Sparc.
You need to install the following patches:
ICU library: 116103-08 (or higher) for Solaris 8, or 114677-08 (or higher) for Solaris 9.
NSS/NSPR/JSS: 119209-04 (or higher) for Solaris 8, or 119211-04 (or higher) for Solaris 9, or 119213-04 (or higher) for Solaris 10.
SASL: 115328-02 (or higher) for Solaris 8, 115342-02 (or higher) for Solaris 9 or 10.
LDAP C-SDK: 116837-02.
LDAP JDK: 119725-02.
And also the 2 most important ones are: 115610-23 and 115614-26.
Please, do not try to set LD_LIBRARY_PATH, directory server should work without.
Regards,
Ludovic.

How to create a roadmap ui element dynamically in webdynpro abap?

Dear team
iam new for webdynpro my question is how to create the road map programme dynamically using webdynpro
could you tell me what are the steps i have to take, what are the elements i have to bind?
and what code & where i have to write the code?
regards
sathya

Hi Sathya,
              Write the follwing code in WDDOMODIFYVIEW method to create a Dynamic ROADMAP and also create an attribute of
               type string to control the selection of steps in road map.
method WDDOMODIFYVIEW .
data : lr_ele type ref to if_wd_view_element.
data : lr_rm type ref to cl_wd_road_map.
data : lr_step type ref to cl_wd_road_map_step.
data: lr_container type ref to cl_wd_transparent_container.
data : lr_flowdata type ref to cl_wd_flow_data.
CALL METHOD view->get_root_element
    receiving
      root_view_element = lr_ele.
lr_container ?= lr_ele.
CALL METHOD cl_wd_road_map=>new_road_map
EXPORTING
    id                       = 'ROADMAP'
receiving
    control                  = lr_rm.
CALL METHOD lr_rm->bind_selected_step
EXPORTING
    path   = 'VALUE'.
CALL METHOD cl_wd_flow_data=>new_flow_data
EXPORTING
    element     = lr_rm
receiving
    control     = lr_flowdata.
CALL METHOD lr_container->add_child
EXPORTING
    index     = 1
    the_child = lr_rm.
CALL METHOD cl_wd_road_map_step=>new_road_map_step
EXPORTING
    id                  = 'ONE'
    name                = '1'
receiving
    control             = lr_step.
CALL METHOD lr_rm->add_step
EXPORTING
    index    = 1
    the_step = lr_step.
CALL METHOD cl_wd_road_map_step=>new_road_map_step
EXPORTING
    id                  = 'TWO'
    name                = '2'
receiving
    control             = lr_step.
CALL METHOD lr_rm->add_step
EXPORTING
    index    = 2
    the_step = lr_step.
CALL METHOD cl_wd_road_map_step=>new_road_map_step
EXPORTING
    id                  = 'THREE'
    name                = '3'
receiving
    control             = lr_step.
CALL METHOD lr_rm->add_step
EXPORTING
    index    = 3
    the_step = lr_step.
endmethod.
Then you can use the context attribute to navigate between the steps and do respective actions.

JDS Roadmap

Similar Messages

Maybe you are looking for