JMOQ Red signal error in Tax tab

Hi
We have an issue when raising a PO. Wherein for JMOQ for a particular tax code it shows 'Red' signal under conditions tab, but when the tax code is changed to some other then it shows green. Would appreciate your response on this
Thanks and Regards

hi
if ur using the taxinn  process then check the jmoq entries for the cst tax ciode in FV12
if they r not there maintain it in fv11
if ur using taxinj then check ur tax code and look for the gl acct is comming in the tax code for the jmoq condition
regards
kunal

Similar Messages

  • In MIRO screen, if clicked on 'TAX' tab  error 'Entry of tax not allowed in

    Hi,
    In MIRO screen, if clicked on 'TAX' tab  error 'Entry of tax not allowed in current account line' is displayed. Message number FF847. What may be the reason for this error message?
    Entry of tax not allowed in current account line
    Message no. FF847
    Diagnosis
    If you enter a tax amount in the current account line, the system does not allocate the amount to one tax code, but instead to all tax codes that exist in the document. In this case, the amount needs to be split up using the rule-of-three procedure. The sum of the computed taxes of all tax codes is used as the comparison basis. If each of the computed tax amounts of all tax codes equals zero, the system uses the sum of the tax base values as the comparison basis.
    System Response
    If the respective comparison basis equals zero, the system issues an error message.
    Procedure
    Go to the tax screen or tax tab page and enter the appropriate tax amounts for each tax code.

    Hi,
    Please check SAP Note- 1551857  for the same.
    Other terms
    FF707, FF716, FF796, FF847, FB70, SAPLTAX1
    Reason and Prerequisites
    There is a program error.
    Solution
    Implement the program corrections.
    When you choose "Cancel" on the tax screen during posting or simulation, the system returns to FB60 or MIRO again.
    The message FF 847 on the "Basic data" tab page is suppressed for company codes with jurisdiction codes if no expense items exist.
    Hope this will resolve your query.
    Regards,
    Sandesh Sawant

  • Withholding tax tab is disabled.

    Hi Experts,
    In FK02(Vendor Master) withholding tax tab is disabled.Where is the setting in IMG to enable it.
    Thanks in advance
    Regards,
    Gaurav

    Thanks,
    Now facing one more problem....It shows some error Entry IN  CO does not exist in T059Z (check entry)  ..but It shows in table T059z..pl help
    Regards
    Gaurav

  • Error in Tax code while creating a PO in T.code ME21n

    Hi,
    I am trying to create purchase Order, I am getting an error when while entering this
    Tax Code : v1
    Jurisdict. Code: RS14902
    The error is "Tax code v1 in procedure TAXBRJ is Invalid"
    How to rectify this error. Or
    What can be other way of entering the tax code and jurisdict code

    Hi,
    Go to the Table T007A, where you find the tax codes.
    Input & out put taxes are the tax types.
    In FTXP T.code give the tax code and  click on the
    Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
       In T007 Table give the proper input and get the details.
    Regards,

  • Error FF753 Tax code 01 not appear in any G/L account item with FM Active

    Hi
    We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are  getting the Error FF753 Tax code 01 not appear in any G/L account item.
    This error however does not appear when posting directly from FI with the same tax code.
    I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
    Please advise.
    Regards
    Sandeep

    Hi:
              If you could please refer to the contents of  OSS Note 112609 - How are tax codes transferred to conditions ?
    "Symptom
    If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
    Other terms
    FF805, FF747, FF753, MWSKZ, MWSK1, tax code
    Reason and Prerequisites
    The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
    Solution
    In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
    Basically:
    The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
        1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
        2. The tax code is transferred into all conditions, for which
        the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
        the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
        the condition is not statistical (if it is no invoice list condition),
        the condition is no tax condition.
    After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
    Special features:
        1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
        the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
        the condition is not statistical (if it is no invoice list condition).
        the condition is not a tax condition.
        2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
    Notes:
        1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
        2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
        3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
        4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
    Regards

  • While Printing Stock Transfer PO giving error message " Tax code in procedu

    Dear SAP MM Cons,
    I want see the print preview of stock transfer purchase order but i getting following error.
    Tax code in procedure TAXINN is invalid
    Where we need not require to give any tax code in the stock transfer PO. Can any body help me to see the printpreview of STO.
    Reagrds
    Abhishek Tiwari

    Kedarji
    Thank you.Urgent please.
    Regards
    venkat
    Edited by: garapati on Feb 15, 2008 12:06 PM

  • Adding New Field Under Sales Tax/Service Tax Tab in XD01

    Hi Experts,
    I want to Add new Field in CIN Details under Sales Tax/Service Tax Tab.
    Is it Possible to Add Field under Standard Tab.
    Thanks & Regards,
    Sandip Kokate

    hello,
    yes there are two ways:
    1) change standard screen. (that's the bad one).
    2) Use GuiXt tool which provides you with a possibility to add your custom objects into standard screens, change layout, visibility and so on.
    http://www.****************/Tutorials/Others/GUIXT/Page1.htm
    http://www.synactive.com/tutor_e/tutor.html
    i had personally used this third party tool without license ( you will be able to use only basic commands. adding  input fields is one of them). I think it is the best way to enhance old transactions which don't have appropriate BADi's,  user exits and so on.
    br,
    dez_

  • Error: FF805 Tax statement item missing for tax code

    Hi all,
    We are getting an error when releasing billing document to accounting in 4.7system.
    Error: FF805 Tax statement item missing for tax code O0
    No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
    parameters by the application to the Accounting interface.
    Please give your inputs and will be rewared.
    Quick reponse will be appreciated.
    Thanks & Regards.

    Dear Mehak,
    I am sorry for the late reply, but I started (in fact) to work in SDN Forum this year, even I entered earlier.
    We have many FF805 errors reported by customers and the same solution has resolved the problem. Please note that the SD-FI interface changed from earlier releases. The note 400766 eplxains the checks made.
    So it is possible that now you get error message FF805, when in an earlier release you didn't get it, eventhough no customizing change.
    Please review note -> 392696   R/3 Tax Interface Configuration Guide
    However please note => In the vast majority of cases, error FF805 occurs because of an error in your pricing procedure. The attached note 112609 explains in detail how tax codes are transfered to conditions.
    The note 400766 explains the checks performed by the system on the Tax codes:
    1. system checks whether there is a revenue line for each tax line.
    2. in the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
    If the tax condition has condition value zero and condition base value zero, then it is not transferred to FI.
    If you have revenue lines containing a tax indicator XX, but no tax line with tax indicator XX, then the error FF805 issues, and it is justified. => Please check these informations.
    -> EXAMPLE
       If tax condition MWST has base amount zero and value zero; for this reason it is not passed to accounting. But, according to the criteria reported by note 112609, its tax indicator EG: A7
       has been assigned to the condition EG: ZBR1.
       So in accounting there would be a revenue line with tax indicator A7, but there isn't any tax line with indicator A7 (because MWST doesn't pass to FI). The note 400766 states situation is unallowed, and error FF805 is justified.
    IMPORTANT: Just a hint, any issue with FI, kindly report in the forum:
    Expert Forums - SAP Solutions - ERP Financials
    There you will find a lot of people that works with FI and can help you with future issues, including me
    I hope I could help you
    Kind Regards,
    Vanessa Barth.

  • Error:  FF805 Tax statement item missing for tax code O0

    Hi Gurus
    We are working in Upgrade Project 4.6C to ECC 6
    We are getting an error when releasing billing document  to accounting in ECC 6 System.
        Error:  FF805 Tax statement item missing for tax code O0
        No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
        parameters by the application to the Accounting interface.
    This issue occurs in both DEV and QA2.
    Please give your iputs and will be rewared
    Thanks and Regards,
    Sateesh.K

    hi,
    The problem may be due to missing authorizations.
    Please looking into the note 780589 and 188200.
    Hope this might be of some help.
    Regards,
    Imran

  • Tax amount in MIRO Tax tab

    Hi All,
    What is the significance of the field Tax document currency in MIRO Tax tab. Here whatever tax amount is displayed is not matching with the actual tax amount. Please exlain me the significance of this field.
    Thanks in Advance
    Pavan

    Hi Malyadri,
    I have not posted part 2 entries. What I am observing is that vat amount is calculated on base amount and hence there is difference.
    Now, I doubt that I have not posted the Part 2 and hence this is the difference.
    Please if any body has faced this same scenario please tell me.
    Thanks and Regards
    Pavan

  • No signal error with mac mini to acer monitor

    I bought an Acer monitor and a Mac mini back 11/11 and it has worked fine.  I recently moved the computer to a new room and when I set everything up I got a no signal error with the monitor and went to sleep mode.  I have tried another monitor (viewsonic) and a new VGA cable and a new VGA to dvi converter to no avail.......any suggestiins....frustrating thing is both monitor and computer are working.

    Try resetting the SMC andNVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
      About NVRAM and PRAM
    Next call Apple since yo have 90 days of free telephone support
    Complimentary Support (USA)

  • Man/Assessed val.ind in the net worth tax tab of the Asset Master.

    Hi Friends,
    Checkbox Indicator:Manl net worth tax val. field in the Net worth tax tab is optional in the screen layout rules for an Asset class. But the Check box is not appearing before the manual networth value field in the Asset master data. Could you please through some light on this why it is not appearing in the Asset Master even it is optional in the screen layout rules.
    Thanks and Regards
    Koteswararao Padarti

    Hi Bernhard,
    First of all thanks for your response. The maintenance level in the screen layout is at Main Asset number.  Just for understanding, Even if the maintenance level is at Asset class level only the default values should flow to the master and it should be modifible at Asset Master level.
    In My case the maintenance level is at Asset Main number level, but still  it is not appearing. Please let me know is there any thing else can effect this field status?
    Thanks and Regards
    Koteswararao Padarti

  • Problem in Service Tax Calculation in PO taxes tab [CIN].

    Dear Experts,
    For external services procurement, i have configured service pricing procedure for the pricing application - MS.
    Service basic prices and other pricing stipulations are maintained in Services tab [PO Item Level].
    For service tax following condition types are maintained -
    1] JST1 - IN: A/P Service tax
    2] ZSED - IN: ECESS Services
    3] ZSHS - A/P SHECESS Service
    Condition record in Transaction - FV11 are maintained for the tax code only [Key Combination]
    Condition table assigned to the service access sequence is assigned with tax code field.
    I have maintained the condition record for all above mentioned condition types. for example Tax Code - S1.
    But in Service Purchase Order, when i am assigning tax code, it is adopting tax percentage in taxes tab but
    not copying or not adopting the service prices at or for the Condition type - BASB - Base Amount.
    Please Guide me on the issue.
    or please guide me on SAP service tax configuration.
    Thanks in Advance

    I have Check it in case of material procurement i mean for the basic excise duty and other taxes it is adopting the value for basb.
    The problem is only with service tax conditions.
    Please give me the steps for service tax configuration.
    please provide me the steps for cin service tax processing.

  • WIthholding Tax TAB is not appearing in F-53,F-58

    Hi SAP Gurus,
    we are on SAP ECC 6.0  and if we execute all post withclearing transaction like f-53 or F-58 only following tabs are appearing
    Standard
    Partial Payment
    Residual Item
    and Withholding tax tab is not appearing, we have checked in SHDO and Withholding tax code having progrmamme SAPDF05X and screen 6105  and it is appearing there
    please help us out where changes have to made to activate this TAB as due to supression of this TAB our end users have to make Witholding tax calculation manual which is tedious job
    BR
    Sajida

    Hi Sajida,
    Kindly check the Vendor Reconciliation G/L Account  in FS00 Tcode check the Field Status
    variant for eg. G067 whether the Withholding tax code and Withholding tax amounts are Optional
    Entries or not.
    Hope this will help to solve your issue
    Thanks
    Trinath

  • With holding tax tab not showing up in MIRO

    Hi,
    Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
    Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
    PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
    Thanks

    Hello Shruti,
    Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
    Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
    And also check on the MRIO screen, have you checked "calculate tax" under general tab.
    Hope it will help you
    Thanks
    Para

Maybe you are looking for