Job completed but status showing still yellow

Hi Experts,
One of full load status tab showing yellow, but the job completed when i checked in SM37.
I am loading from ODS to Cube there is no PSA. we are using 3.5 version.

Hi David,
Check the load in the details tab weather all the data packets are in green status.If at all the idocs are hung or TRFCs are hung you may face this issue. try to manually flush the hung Idocs and TRFCs.
If everything is fine wait for the PID process to finish- some times it happen the PID might be running at the background.
If everything is fine n the status of the request is yellow -try to change the status of the load to green.
Regards
KP
Edited by: prashanthk on Oct 5, 2010 2:22 PM

Similar Messages

PO created but Status showing as Awaiting for approval in extended classic

Hi Experts,
SRM 5.0 extended classic scenario,SC approved and PO created but status showing in follow on documents node in SC as awiting for approval.
Can any help in finding solution.Thanks in advance.
Thanks,
Babu

Hi Babu,
I am facing the same issue in the ECS SRM 5.0 after approving the shopping cart the PO created in EBP but the WF status is waiting and PO is not transmitted to R/3. Below is the status of SC and PO in BB_PD. Kindly suggest what could be the problem where i can analyze.
SC
                    Status         Description                    Inactiv
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
0000000001 I1111          Item in Transfer Process       X
0000000001 I1113          Follow-on Document Created
0000000002 I1111          Item in Transfer Process       X
0000000002 I1113          Follow-on Document Created
PO
Stats:
           Status         Description                    Inactiv
HEADER     I1015          Awaiting Approval
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1180          Document Completed
Thanks,
Kannan B

HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

TS3147 Print job "completes" but remains in the queue without every printing.

My HP Officejet Pro 8600 printer won't print. The print job "completes" but remains in the print queue. I've tried all the basic solutions, but nothing works. I know the printer is connected to my network as my two Window 7 PC's print to it just fine. Everything is connected through a Netgear R6300 router. I've tried to reinstall the printer driver on the Mac from the HP installed CD, but it fails to complete the job. I get "an error occurred while trying to add the selected device"...."unable to communicate with the printer at this time" message. Any suggestions?

What version of java? 1.3 printing is quite slow with graphics; 1.4 is greatly improved.

Mirgrate from 2003 to 2010, mailbox migrates complete, but recipient mailbox still shows connected to 2003 server

Last night I migrated the last of my 2003 accounts to 2010 server. (we have successfully migrated 1000+ accounts with no issue). This morning, I looked at the Move Requests and they all showed as Completed. Some users reported being unable
to open their mailboxes. When I look in EMC, the mailbox recipient shows still connected to the old 2003 mailbox. When I try to manually migrate them, I receive an error that the user is already in the target database. (I have already cleared the
move request)
Looking in Disconnected mailboxes - they do not show up.
2003 ESM shows them as disconnected mailboxes.
How can I get them to connect to the database in 2010?

Both servers have been rebooted - thereby, restarting the store.
If other people try to email these users they receive the following bounce messages.
Delivery has
failed to these recipients or groups:<o:p></o:p>
[email protected]
There's a problem with the recipient's mailbox. Please try resending this
message. If the problem continues, please contact your helpdesk.<o:p></o:p>
Diagnostic information for administrators:<o:p></o:p>
Generating
server: SvrEX01.mydomain.local
[email protected]
#554-5.2.1 mailbox disabled 554 5.2.1 STOREDRV.Deliver.Exception:AccountDisabledException.MapiExceptionMailboxDisabled;
Failed to process message due to a permanent exception with message Cannot open
mailbox /o=Hospice/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SvrEX01/cn=Microsoft System
Attendant. 16.55847:9F000000,
17.43559:000000001001000000000000CA00000000000000, 255.23226:00000000,
255.27962:FE000000, 255.17082:6C090000, 0.26937:00000000, 4.21921:6C090000,
255.27962:FA000000, 255.1494:00000000, 255.26426:FE000000, 2.22787:00000000,
4.13032:0F010480, 0.25848:0F010480, 4.7588:0F010480, 0.25840:0F010480,
4.6564:0F010480, 0.22086:0F010480, 0.51399:0F010480, 4.2567:6C090000,
0.19452:0F010480, 4.2199:6C090000, 0.56415:0300AF80, 4.48223:6C090000,
4.17097:6C090000, 4.8620:6C090000, 255.1750:B0844210, 0.26849:0F010480,
255.21817:6C090000, 0.26297:0F010480, 4.16585:6C090000, 0.32441:0F010480,
4.1706:6C090000, 0.24761:0F010480, 4.20665:6C090000, 0.25785:0F010480,
4.29881:6C090000 ##<o:p></o:p>

Compressor failing after job completion, but only in batches?

First, the setup is a stock MacPro 8-Core 2.8GHz. RAM has been upgraded to 6GB, there's 3TB of SATA 3.0Gbps drives inside. Qmaster is set up with a QuickCluster, and we've tried several variations on the number of virtual nodes. Currently, it's at 8, but we see this problem with 2, 4, 6 as well.
We're working with Uncompressed material, running some scaling and cropping presets and creating a new Uncompressed SD resolution quicktime. By Uncompressed, I actually mean uncompressed (Blackmagic 10 Bit 4:2:2 in and out). The job is segmented and processed, and shows as 100% complete, but fails in every case, *ONLY IF IT'S A BATCH JOB* at the "Merging Distributed QuickTime Segments" stage. If we run these one at a time, they all work fine. The failures vary, but all have to do with Quicktime errors, sometimes it's just "error 2" other times it's more substantive, talking about file offsets being incorrect.
a batch of small files will work fine, but these are all 130GB to 150GB in size.
I've watched the Batch Monitor status until the failure occurs, and the problem seems to be related to disk I/O. This Merging step takes forever - the final file takes almost as long to merge as it does to process. It seems that if there's a merge happening while other jobs are running everything is fine, but once another large merge begins, everything bogs down and they start failing. If we then re-run each one of those individually with the exact same presets, target locations, etc. they run perfectly.
But the idea here is to create a workflow we can just throw jobs at and not have to worry about this. So, is there something we can do to prevent this from happening? Any ideas?
-perry
Message was edited by: perry paolantonio
Message was edited by: perry paolantonio

First, the setup is a stock MacPro 8-Core 2.8GHz. RAM has been upgraded to 6GB, there's 3TB of SATA 3.0Gbps drives inside. Qmaster is set up with a QuickCluster, and we've tried several variations on the number of virtual nodes. Currently, it's at 8, but we see this problem with 2, 4, 6 as well.
We're working with Uncompressed material, running some scaling and cropping presets and creating a new Uncompressed SD resolution quicktime. By Uncompressed, I actually mean uncompressed (Blackmagic 10 Bit 4:2:2 in and out). The job is segmented and processed, and shows as 100% complete, but fails in every case, *ONLY IF IT'S A BATCH JOB* at the "Merging Distributed QuickTime Segments" stage. If we run these one at a time, they all work fine. The failures vary, but all have to do with Quicktime errors, sometimes it's just "error 2" other times it's more substantive, talking about file offsets being incorrect.
a batch of small files will work fine, but these are all 130GB to 150GB in size.
I've watched the Batch Monitor status until the failure occurs, and the problem seems to be related to disk I/O. This Merging step takes forever - the final file takes almost as long to merge as it does to process. It seems that if there's a merge happening while other jobs are running everything is fine, but once another large merge begins, everything bogs down and they start failing. If we then re-run each one of those individually with the exact same presets, target locations, etc. they run perfectly.
But the idea here is to create a workflow we can just throw jobs at and not have to worry about this. So, is there something we can do to prevent this from happening? Any ideas?
-perry
Message was edited by: perry paolantonio
Message was edited by: perry paolantonio

Query is running but status shows INACTIVE

Hi All,
I am running one query and is still running but when i checked v$session the status shows INACTIVE since long time..
Can somebody please help me to understand why the status is INACTIVE even if the query is running.. Is my session waiting for some resources?
Also i checked v$session_wait it shows "SQL*Net message from client"
Oracle version 9.2.0.7.0
OS : SunOS 5.10
Module : Sql*Plus
Any help is greatly appreciated.
-Harsh

Thanks much for your reply Mark.
This session i myself running from sqlplus and its still running.
Also here's my session info
select SID, STATUS, program, module, last_call_et from v$session where SID=78;
SID STATUS PROGRAM MODULE LAST_CALL_ET
78 INACTIVE sqlplus.exe SQL*PLUS 0
I checked the locks too there is no blocking or blocked sessions using following.
select /*+ RULE */ a.session_id, s.serial#, s.username, s.status
from dba_locks a, v$session s
where a.blocking_others = 'Blocking'
and a.session_id = s.sid
order by 1;
Now under v$session_wait my session 78 is showing wait as 'db file sequential read'
So is my session now waiting for resources? Can you please help me how to find that my query has enough resources or if not does my session is under wait.
Thanks
-Harsh

Purchase Order has approved but Status show as Unapproved

Dear All Experts,
I have a Purchase Order need to go throught approval procedure. The Purchase Order has approved by user and add into system and printed out. When second time, open the same Purchase Order, the status show "Unapproved" but the Purchase Order windows header name show Purchase Order [Approved], this make user unable to copy to GRPO. I have try to restore stored procedures in SAP B1, it does not make any changes. The user is using SAP B1 2007A SP0 PL49. Please Advise.

Hi Angie
the purchase order once approved has to be added on to the system after approval if u say that u have added the purchase order after it got approved then that seems to be a concern for that u need to contact ur sap partner or if u are a partner then u need to get in touch with sap to resolve the isssue as it could be because of problem with ur database
but before that please be sure off that u are using the correct way and have sucessfully added the documnt apon approval.
Regards,
Manish

Qty Contract Issue - Completed but Status still "Being Processed"

Hello,
I need help with a situation I am encountering. This is AFS specific.
Create QTY Contract for 100. Both the item and schedule like have completion rule "B" and the copy control between contract and order has document flow set to "2" and positive.
Scenario 1:
If I create a call off order for exactly 100 (same grid value), the contract is correctly set to COMPLETE.
Scenario 2:
If I create a call off order for 50 and another call off order for 50, the contract status is BEING PROCESSED.
We need the contract status in the second scenario to be changed to "COMPLETED".
Thank you,
Siobhan

Hai Siobhan,
In our system i created similar contract and sales orders, but both are showing completed only.
1. Can you check again with complete cycle up-to invoice.
2. After creating 50 + 50 two orders, Check whether system is allowing to create further more orders
Please post the updates of the issue.
Regards,
Mani

Monitor issue - PC completed but monitor shows red

We have implemented Support Pack. For one of the data load - Process chain has completed and data loaded to cube but process chain log still shows red. Please help.
Thanks,
Mohammed

Hi,
If you feel that this issue is happened due to support pack implementation then all of your process chains available in system should have monitor status as RED.
But if you are facing issue with particular load then check the process log and job log in SM37. There might be some issues in current load, try to repeate the load and see how it works?
Regards,
Durgesh.

Client copy completed but scc3 shows some tables deleted why

Dear Experts ,
here i perform test run for production client 500 to quality client 400 (remote type)
and i choose sap_cust profile
after some time my remote client copy is completed successfully
and i find log files in scc3
my doubt is when i execute scc3 for log file
it shows log analysys in that
target client source system every thing is their and also
here i found
number of tables      50089 to 50089
Deleted lines            10905326
copied lines             12451200
i did not understand is that my client copy is successful or not
but log file shows successful,
if it is successful means why some lines are deleted
please reply me
Regards

Hi,
As per your logs, you have run the test run, so client copy is not happened. If status in SCC3 is successful then client copy is successful. You can also further check logs.
Thanks
Sunny

Print jobs complete but don't leave queue

I have a HP Photosmart C310 which has worked fine with Mac Lion until the past few days. When I print something, the print job no longer leaves the queue unless I manually delete it. Otherwise, the next time I print, the printer still says it is trying to print the previous job.
I tried resetting the printer, (deleting and reinstalling), but that didn't fix the situation.
Can anyone help?
Thank you!

Hi Colleenmaura,
I understand that the print job does not leave the queue after the print has completed. I would like you to follow the steps in this link by MissTeriLynn for uninstalling and reinstalling the software. There are some extra's steps that I think you need to perform to get a clean install.
LINK: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-multiple-pages -with-HP6300-and-OS10-6-8/m-p/3107869/highlight/true#M74156
I hope this helps, let me know.
Thank you,
Advance 23
I work on behalf of HP

GRC 5.3 - Auto Provisioning completed but Status remains Open

Hi All,
Lately GRC 5.3 does not change the status to closed once approval has been submitted. Auto Provisioning completed successfully as roles was assigned to back end ABAP system.
Please advice how to change the status to CLOSED once auto provisioning completes.
Thank you
Jacky.

Hi,
I'm not sure if this is the new issue with SP17. Everything is working fine before we upgrade to SP17. Is anyone can help to solve this issue?
Thank you.
Regards,
Merdelyn

External video doesn't play but only shows still frame (some times).

When trying to view a clip or sequence on my external video monitor (NTSC via firewire through Sony converter box) and only for some of my projects, I cannot get the video to play. It displays a single frame and then updates when I stop playing a clip on the desktop. I've selected "all frames" in the External video option, but I cannot get it to play real time. This only happens with certain clips or sequences. Any ideas what's up?

I've been having this same issue. I'm pretty sure it has to do with one of my sequence settings. I have no issues when I'm playing back an SD project but when I try to playback an HD project to an SD monitor I encounter thsi problem where it stays locked on the last frame I paused at. I'm using a Blackmagic Decklink Extreme HD and attempting to playback over composite.
Thanks

I HAVE AN ACER COMPUTER. IT HAS WINDOWS 7. I USED TO HAVE ADOBE FLASH. I TRY TO REINSTALL AND GET THE MOST UP TO DATE VERSION. IT SAYS IT IS COMPLETE BUT NEVER SHOWS UP ON MY COMPUTER.

WHY WON'T IT INSTALL ON MY COMPUTER? I USED TO HAVE IT.

Hello,
What do you mean by 'never shows up on the computer'? Flash Player is a browser plugin and works in the browser, not outside, unless you have a SWF file you want to open, in which case you'll need the Flash Player projector.
What browser are you using? If you launch the Control Panel and go to Control Panel\All Control Panel Items\Programs and Features do you see Adobe Flash Player listed?
Maria

Job completed but status showing still yellow

Similar Messages

Maybe you are looking for