Jpegs change in brightness when posted

I recently created a new website with iWeb '08. During the creation everything looked good. The images were correct in color, contrast, and brightness. However, once the site was uploaded and published the contrast and brightness changed on all the images. Now they are all too dark. Anyone else having this issue?

There has been a huge amount of discussion in this forum about this very subject. Here's an example..
http://discussions.apple.com/thread.jspa?messageID=5103454&#5103454

Similar Messages

Changing PO details when posted in closed period

Hi,
We are on SBO2007A PL42.
When we attempt to change details on a purchase order that was posted in a period that is now closed, we are unable to do so.
There shouldn't be a problem modifying these PO's as they don't affect the general ledger in any way.
The only way we have found around it is to modify the posting date of the PO and then change the details we want to change.
Is there any other way to allow us to change the details without changing the posting date?
Thanks,
Michael

This is a problem with authorisations, which is fixed in PL46 of 2007A.
Try giving authorisation to "update posted AR documents", or to allow to "post to Closing Periods".
I have found I needed to give both of these to get this to work.
The other option is to change the date on the PO to a date in an open period.
These should be able to be updated by superusers?

Change GL account when posting using MIRO

Hi all,
Can i change the display only field for GL account to input field.
I'm using ECC6 version.
Please help.
Thank you in advance
regards

Go to
SPRO -> Materials Management -> Logistics Invoice Verification -> Activate Direct posting to GL accounts & Material accounts.
Execute, select "New Entries" and put a tick mark if you want only the FI field editable. If you want FI and Mat. accounts editable then tick both.
Thanks,
Ashish

Substitution of account(HKONT) when posting in MIGO/MIRO

Issue: Need to change account(HKONT) when posting in MIGO/MIRO
example:       HKONT(GL Account)       KTOSL(Transaction type)
               1000000001              XX1
               1000000002              XX2
               1000000003              XX3
If XX3 exist then replace hkont of XX1 to hkont of XX2
expected result is:
               1000000002              XX1
               1000000002              XX2
               1000000003              XX3
Solution with problems:
1. Used substitution GGB1>Financial Account>line item for field HKONT. My problem with this is, since the data is in line item. How can I get the replacement of my account(shown above sample). if BSEG structure only shows 1 line item. I tried using bool_data-bseg. but its empty. Im assuming bool_data is used when callup 003(complete document) is triggered.
I used subtitution field G/L - Exit <UXXX>
Any Ideas or solutions would be great!!

if your Substituion exit is called then you can directly change the value of
BSEG-HKONT there according to your requirement.

Error when posting to WebService on XI system using Soap

Hi,
We have a scenario where we have a 3rd party system posting to the XI webservice. The sender Soap adapter is configured for HTTPS without client authentication.
I am using soapui software to test the connection. Before changes were made to the configuration for SSL, we were able to post to XI using the http url. After the changes were made, when posting using the http url no response is received and no message is produced in XI. Also, when we change the url to https and using the port 50001 to post the SOAP message we get the following error:
The following error occurred while parsing the HTTP request: com.sap.engine.services.httpserver.exceptions.ParseException: Incorrect request line: [CONNECT eagnmnsu39e:50001 HTTP/1.1]..
Can anyone provide some insight to the issue?
We are using a user ID with the correct security profile
Thanks.

http://publib.boulder.ibm.com/infocenter/wmbhelp/v6r0m0/index.jsp?topic=/com.ibm.etools.mft.doc/ac04595_.htm
Hope this link will help you.
BR,
Alok

Substitution of account(HKONT) when posting in MIGO

Issue: Need to change account(HKONT) when posting in MIGO
After simulation the G/L account is split into tax wise amonts like 2% ecess, 1% hscess 2%cst.
example: HKONT(GL Account) is display in one g/l account
g/l account             amount                       posting key
10030000          5,961.86-                     31
10030000         50,675.79-                    31
10030000         2,980.93-                      31
expected result is: i need to display like this
10030000          5,961.86-                     31
10045000         50,675.79-                    39
10045000         2,980.93-                      39
Thanks,
Sreedhar.

This is not true.
If the system generate a FI document, the FI validations and substitutions rules will take place.
Modification on key fields (like HKONT) by substitution have to be heavily tested because can lead to inconsistency.
Regards,
Alexandre

[SOLVED] Changing cpufreq governors and brightness when AC unplugged

I can't seem to figure out how to make it so when I unplug the AC power source from my laptop commands are run that change the cpufreq governor and change the brightness with nvclock.
Specifically, I want to have my laptop running cpufreq as ondemand while on AC power and powersave while on Battery power. I also want the command
nvclock -S 30
to be run when the AC is unplugged. Then, when it's plugged in again, I want this run:
nvclock -S 90
This is my /etc/acpi/handler.sh. I've been experimenting with it and following numerous guides and tips I've googled, I've read as much as I can about laptops and acpi in the arch wiki, but I just can't seem to get these commands run properly.
#!/bin/sh
# Default acpi script that takes an entry for all actions
# NOTE: This is a 2.6-centric script. If you use 2.4.x, you'll have to
# modify it to not use /sys
minspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq`
maxspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq`
setspeed="/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed"
set $*
case "$1" in
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
button/sleep)
case "$2" in
SLPB) echo -n mem >/sys/power/state ;;
*) logger "ACPI action undefined: $2" ;;
esac
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo "powersave" >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo -n $minspeed >$setspeed
nvclock -S 30
#/etc/laptop-mode/laptop-mode start
00000001)
echo "ondemand" >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo -n $maxspeed >$setspeed
nvclock -S 90
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000) #echo "offline" >/dev/tty5
00000001) #echo "online" >/dev/tty5
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
esac
I would think the ac_adapter) part is the most relevant, but I posted the whole thing just in case something else needed to be done.
Thanks for any help. Also, if there's a better way to accomplish the same thing, please let me know.
P.S. I have laptop-mode-tools installed, but there is very little documentation and following forum posts to try to find what I want is more difficult than I thought. If posting any config files relating to that would help, I'll do that too.
Last edited by Allamgir (2009-07-05 00:33:10)

So I finally put together some scripts with the help of google that work properly with start/stop, but laptop-mode-tools doesn't use it for some reason. Here is the script I put in /etc/laptop-mode/batt-start called brightness.sh:
case "$1" in
'start')
sh /home/agi/.bin/brightness-low.sh
'stop')
sh /home/agi/.bin/brightness-high.sh
'restart')
echo "Usage: $0 [start|stop]""
esac
What this does is run scripts that change the brightness found in my ~/.bin directory with start (to lower brightness) and stop (to raise it again). Here is brightness-low.sh:
nvclock -S 30
as you can see it's very simple. Just the command. brightness-high.sh is similar:
nvclock -S 90
Now, the strange part is that if I run brightness.sh in a terminal, it works perfectly:
$ sh /etc/laptop-mode/batt-start/brightness.sh start
Changing Smartdimmer level from 25% to 30%
New Smartdimmer level: 30%
$ sh /etc/laptop-mode/batt-start/brightness.sh stop
Changing Smartdimmer level from 30% to 90%
New Smartdimmer level: 90%
I only put my brightness.sh script in batt-start and not nolm-ac-stop or anything because the config file says anything in *-start will be started on entry into the state and stopped on exit.
Now I'm completely confused. It seems as if I've done all I know to get this to work, rebooted every time, yet when I unplug my laptop, the brightness remains the same.

Change Moving Average Price when Post Goods issue posted from VL02N

Hi all,
Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR
when Post Goods Issue posted from transaction VL02N.
Thanks in advance,
Mila.

Hi,
Check these Enhancemnts...
Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
Badi Name            Description
DELIVERY_ADDR_SAP    Determine Time-Dependent Delivery Address in Delivery
DELIVERY_PUBLISH     Returns BAdI Implementation: Automatic GR Posting T 2
DELIVERY_PUBLISH     Updating of Delivery in Purchase Order
DELIVERY_PUBLISH     AIP: Delivery Confirmation for Sales Order
Regards
Raghu

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Make changes to auto generated line items when posting invoice thru MIRO?

Hi All,
My requirement is to make some changes in line items data when posting invoice through MIRO transaction.
I have written a substitution for the same, The issue is that some line items get automaticaly created (i.e inter company posting). I need to make changes to these line items as well but substitution is not being triggered for these auto generated line items.Is there any way by which I can update in these line items as well ?
further do we have any internal table which holds all the line items at runtime....to which I can refer and make the changes. I have searched but could not find one.
Can anybody provide some inputs on this.
Thanks,
Lucky.

Hi Kaushik,
Thanks for your reply.
I am using BADI INVOICE_UPDATE but here we will not be having line items which are auto generated.
When we do inter company posting, line items are automatically created and these are not avaliable in the BADI. I am not sure if we can trap these line items any where.....the possible alternative which I can think of is to use memory reference and modify the internal table which holds all the items but unfortunately I am not able to find any such internal table to refer to at run time ...have u got any idea on this?
Thanks,
Lucky.

Why would I want to change JPEG quality of photos when exporting them from iPhoto?

Why would I want to change JPEG quality of photos when exporting them from iPhoto? Changing the quality of the print changes the size of the saved file and thus impacts the speed at which it is moved on the internet. But other than size of the file, what is the advantage of changing the quality?

I have no idea why you would want to do anything
Some people want lower quality to reduce file size for different reasons
It is an option - if you do pot want to do that do not use that option
LN

HT201317 Album Photo Order Changes when Posted to Photostream

Okay, I really liked the old iWeb app. When I built albums the order in the album remained the same when posted to a web page.
Am I missing something? Why does Photostream put photos back into number/date order? Can this be overridden?
Thanks!

The order is probably alpha-numeric, based on the File Name of the photos. iPhoto allows you to change the photo's title, but to change the file name you must export a copy outside of iPhoto.
Select your album. Then export to a desktop folder, with "use album name" checked. If your album is named "Winter" then the photos will be names "Winter 01," "Winter 02," etc. Your order should be preserved.
If your photo titles are important, you could pad the beginning of each title with a numeral. Then export with "use title" checked, and the file name will become the photo's title.

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

JPEG changing color during export to Word

When I export my file into Word, one of my jpegs changes color dramatically. From a gold hue to bright purple. Does anyone know why this might happen (no other colors in the file are changing) and how to prevent it?J

Are you sure that it is a .jpeg? This happens when the colorspace of the file is not defined or is alterred by the receiving System/Software. Usually .jpegs are OK but other formats may have different colorspaces that the PC System is not reading or reading incorrectly.
If it is not a .jpeg it maybe in a format with indexed colors, indexed in a low bit setting that is again being misread by Windows.
You could try opening and resaving the particular file in Apple's Preview.app to jpeg which should apply some colorspace at least a default one and may correct the problem.
Peter

Hi i cannot change the brightness on my late 2011 macbook pro.

Hi i cannot change the brightness on my late 2011 macbook pro. It is stuck on the lowest level in which i can't view the screen without a flash light. Please i need help how to solve this. I was on my computer when i checked the back which it was really dusty, i tried unscrewing the bottom however some screws were too tight so i took it upon myself and got a rod and startedremoving the dust off the vents and i may have clicked something as i closed the lid on the macbook i could hear the sounds still from the film but the lid was closed as i opened it back up the brightness was on low but sounds were still playing. All the buttons work , all of the F keys, apart from the brightnes keys. I can shine a tourch on the screen and see the display but the brightness will not change but i can see when i click the brightness it says it changes. I have connected it to a spare tv i have via hdmi and i really need help as this is my primary computer and i need it for work when going away. Thank you

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

Jpegs change in brightness when posted

Similar Messages

Maybe you are looking for