Jpg mouseover to flash

this is exactly what I want
http://www.melodicmedia.ca/expand/melodicmedia/index.html
. I have used this script, but it prevents the rss feed from
loading on the page i need it on. Is there an alternaitve script
for this effect?
It is simply a jpg that on mouseover calls a swf to appear,
then on mouseout of the swf, returns to the original jpg.
Any help appreciated

Memory bandwidth has been fixed too since 1.4.

Similar Messages

  • Problem resizing imported jpg images in flash cs4

    when i import a jpg file in flash and then resize this with the transform tool to for example 50% of the original size
    then im not getting the same result as resizing it in photoshop.
    if i first resize it in photoshop and import the image is smooth and looks the way i want
    but if i resize in flash the image gets edgy and not so good.
    so is there a way in flash cs 4 to resize the image with the same result as resizing it in photoshop or
    similar?

    thanks for advice =)
    but the size of the jpeg will maintain the same?
    seems like that, otherwise i think photoshop is the only option..

  • Color Shift When Importing JPG Sequence into Flash CS6

    I am importing a jpg sequence into flash that has been exported from After Effects CS6. No matter what I try, the color will shift when the image imports into flash. The sequence originally started out as a vector graphic in Illustrator (color profile set to sRGB IEC61966-2.1) and then imported into After Effects for an animation that I couldn't quite achive in Flash. The color profile in After Effects is also sRGB IEC61966-2.1 with the "Match Legacy" checkbox checked. I export it out of After Effects as a JPG Sequence and then import into Flash. No matter what I try, the bitmap images' color will shift (become dull) when I import. Even when I open the images in Windows Photo Gallery, they look fine - it's only when I import into Flash.  I've also tried PNG and .PSD Sequence with the same result. I've searched around, but still haven't found a solution. Any help is greatly appreciated.

    I am in the midst of trying to figure out the opposite : Flash to After Effects.  I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile.  RGBA is only part of the story - color profile is all the rest of it.  Eye Dropper doesn't tell you the color profile attached to the image.

  • Need to allow users to upload images (jpg) in the flash (.swf) from your local computer (with the drive C). Help, please.

    Faly .swf is on the server.
    The user loads the page HTMl file .swf.
    By clicking on button_mc the user can select from your computer (local disk) image file to upload not on the server and temporarily - to flash - the file.
    Фалй .swf находится на сервере.
    Пользователь загружает страницу HTMl с файлом .swf.
    По нажатию на кнопку button_mc пользователь может выбрать на своем компьютере (локальном диске) файл картинки для загрузки не на сервер, а временно - во flash - файл.
    Below given code works only if the image file .swf are in the same directory (folder).
    I know the file name, but I can not find the full local path to his computer to the selected file.
    Ниже приведенный код работает, только если картинка и файл .swf находятся в одной папке (folder).
    Я могу узнать имя файла, но не могу выяснить полный локальный путь на его компьютере до выбранного файла.
    How do I get my site you can download at home in my swf file to a photo to her dalsche work?
    Как сделать, чтобы пользователь моего сайта мог у себя дома загрузить в мой файл swf свою картинку, чтобы с ней дальще работать?
    button_mc.addEventListener(MouseEvent.CLICK, buttonClick);
    function buttonClick(event:MouseEvent):void {
    var mm:String = new String();
    var myFileReference:FileReference = new FileReference();
    var myFileFilter:FileFilter = new FileFilter("Images", "*.png;*.gif;*.jpg");
    try {
    myFileReference.browse([myFileFilter]);
    myFileReference.addEventListener(Event.SELECT, onSelectFile);
    function onSelectFile(event:Event):void {
    mm = FileReference(event.target).name;
    var loaderPic:Loader;
    loaderPic = new Loader();
    loaderPic.contentLoaderInfo.addEventListener(Event.INIT, initListenerPic);
    var urlClipPic:URLRequest = new URLRequest(mm);
    loaderPic.load(urlClipPic);
    function initListenerPic(event:Event):void {
    addChild(loaderPic.content);
    } catch (illegalOperation:IllegalOperationError) {
    trace("Ошибка");
    button_mc.buttonMode = true;

    My question was too difficult for everyone?
    Nobody has been able to help.
    I thought that in this forum a lot of professionals.
    It seems - I was wrong.
    If there is someone who can help, contact us.
    [email protected]

  • How to load jpg if no flash player is installed

    Hi,
    Not sure if I'm posting this in the right program forum or
    category...
    I'm trying to learn how to load a jpg instead of the flash
    movie if the user doesn't have flash player on his computer. Is
    there a tutorial somewhere?
    Would this be code I put in Flash or the web program? I'm
    currently using GoLive CS2...
    Thanks,
    Kim

    Hi Kim,
    Try this:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14526&sliceId=1
    Thanks,
    Mark

  • Alternate jpg for a Flash Banner

    Good day everyone.
    I have a flash banner. I also created an alternate jpg image
    in case the user don't have flash plugin installed.
    Is there a code I can insert on the html or object/embed
    tags, or is it somewhere in the publish settings?
    Thans in advance.

    If you use SWFObject, it's real easy to display alternate
    content when Flash
    is unavailable.
    http://blog.deconcept.com/swfobject/
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • Jpg Resolution in Flash

    Two pics: 380px x 253px
    One is: 180px per inch
    Second is: 350 px per inch
    Second displays much smaller in flash due to higher
    resolution. I would like these pics to be the same size in Flash.
    Do I need to convert both to 72ppi or some other ppi for
    Flash?

    Two pics: 380px x 253px
    One is: 180px per inch
    Second is: 350 px per inch
    Second displays much smaller in flash due to higher
    resolution. I would like these pics to be the same size in Flash.
    Do I need to convert both to 72ppi or some other ppi for
    Flash?

  • Flash banner in a Dreamweaver Template

    Hi all,
    I am using one of the provided Dreamweaver Templates (CSS).
    All is fine, except that for some reason it does not like Flash
    imports. I can alter the template as much as I like and it will
    always successfully change across the site, BUT if I try to insert
    a Flash movie/banner into the template - then it does not appear of
    ANY of the site files. The only way I can see the flash banner, is
    if I open the template.php file in a browser - then you can see
    that it is in fact there and working - but for some reason the
    other pages refuse to acknolwegde it. Images / Tables / Text - all
    work fine - just not flash banners. I even tried saving the banner
    as a JPG file in Flash, then sticking the JPG file in the template
    where the banner should - and it worked perfectly, but as a .swf
    extension it fails.
    Am I missing something?
    Nathan

    > BUT if I try to insert a Flash movie/banner into the
    template - then it
    > does not appear of ANY of the site files.
    Because of the active content .js fix, when you insert a .swf
    file into a
    template, you must use a Site Root relative path for it.
    Open the .dwt template file.
    Double-click on the .swf in design view- the "browse to file"
    dialog box
    should come up showing the currently selected file.
    look in the bottom of that dialog box for the pulldown to
    change from
    document relative path to site root relative path. Change it
    to site root.
    click okay and save the file, and let changes propagate.
    does it show in the child files now?
    [note- It may still not show during local preview because
    site root relative
    paths in javascript will not make any sense during local
    preview- they
    should work fine on the remote host if the site has it's own
    domain name
    though]
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Problem attaching external .jpgs to movie clips

    Hi There,
    I am not able to attach a file (.jpg) outside of flash to a
    movieClip without it changing the scale of the image. Stepping
    through with the debugger, its clear the image loads correctly til
    it is applied to the movie clip, I assume with the attachBitmap
    function. It scales it up a little more than 50% and I can't figure
    out where that scale is coming from. It appears to scale up from
    the upper left corner. We have checked to make sure all the
    movieclips within our flash file are the exact same size as the
    image files (150 X 150). Please see code example. Everything is
    fine except for this. We tried using the matrix transformation to
    down size the images but the quality was not acceptable even with
    using smoothing and pixel snapping.
    So, the basic question being, how do we use attachBitmap and
    have it preserve the original size? Any ideas for how to get this
    to work is greatly appreciated...
    thanks,
    Laura

    well I'm afraid there are a few things that are not quite
    right with the method here - however, the real problem is most
    likely that the original image resolution is higher than 72 dpi -
    it must be set at standard screen res or Flash will scale it up
    uniformly to work at 72.
    I think that you may have more success with something more
    like this:

  • Preload External Jpgs

    What is the easiest way to preload external jpgs? The client
    wants to update these frequently so they should be external, but I
    want them to show up instantly like the rest of the site once the
    preloading is done.
    Any advice? I had thought about loading them into the
    preloader (at 0% alpha), so that they'd be loaded into the cache
    during preload, so that when the home page comes up, they'd be all
    ready to go? But if it's a different instance of the movieclip,
    will it reload the jpg? Or any time i use that external jpg in the
    flash file will it already be in the cache?
    Thanks. I've heard a few different things and would love your
    advice.
    Jeremy

    There are two different things here. pre-caching (I don't
    know what else to call it) and pre-loading.
    It is possible to pre-cache files off the same server. If you
    load into different instances then it should get it from the cache,
    so yes that would speed things up. But... results are dependent on
    an unknown factor: the user's cache settings. If its set to never
    cache you could end up downloading 'to the cache' and just wasting
    bandwidth.
    You can read about that approach here.
    http://www.actionscript.com/Article/tabid/54/ArticleID/Preloading-Files-into-the-Browser-s -Cache/Default.aspx
    Then there's the regular preload approach where you preload
    into movieclips (perhaps with ._visible=false or 0% ._alpha etc).
    You can find a lot of info relevant to that here:
    http://www.quip.net/blog/2007/flash/actionscript-20/tracking-multiple-files-part1
    http://www.quip.net/blog/2007/flash/actionscript-20/tracking-multiple-files-part2

  • Load Random Image in Flash?

    I've googled it and searched this forum. No luck.
    Does anybody know how to load a random image in flash. Like
    on a welcome screen (i.e. the first thing that shows up in my
    timeline with a stop command on it)
    I tried this:
    http://www.kirupa.com/developer/mx/loadingrandombackground.htm
    but can't do this where you are supposed to paste the code in
    Actions: "Now, look at your timeline. Right click on a blank
    keyframe in the timeline and select Actions. Copy and paste the
    following code: "
    seems like i have to add something first like adding a
    behavior like "goto URL" or "stop" or "goto frame" if you know what
    i mean.
    what do i click on???????????????????? to add this code into
    Actions.
    Thanx.

    let say you have 20 images file in jpg format, all at the
    same directory with your flash file, with file name as below:
    pic1.jpg
    pic2.jpg
    pic20.jpg
    in your flash, select the frame which you wan to load a
    random image, type script below:
    num = Math.ceil(10*Math.random());
    filename = "pic" + num + ".jpg";
    _root.createEmptyMovieClip("pic_mc", 1);
    loadMovie(filename, "pic_mc");
    //good luck

  • Have to click on flash movie to activate it

    I have a flash movie that when loads on a webpage, does not
    respond to mouse clicks until the user has clicked anywhere on the
    movie at least once. When you mouseover the flash movie in the
    browser, a grey border appears around the movie and a tooltip with
    the following test appears "Click to activate and use this control"
    Is there a way to avoid the initial click before the user can
    navigate using the buttons in the flash movie?
    Thank you in advance,
    Armo

    please search forum first - google is also your friend here -
    this is front page news on hundreds of
    blogs and news sites - just search anywhere for "active
    content" - there are large number of
    on-going discussions here for the past few weeks - too much
    info for use to re-type so searching
    will provide you with a wealth of information almost
    immediately.
    hope this helps.
    --> Adobe Certified Expert *ACE*
    --> www.mudbubble.com
    --> www.keyframer.com
    Armo_Director_user wrote:
    > I have a flash movie that when loads on a webpage, does
    not respond to mouse
    > clicks until the user has clicked anywhere on the movie
    at least once. When you
    > mouseover the flash movie in the browser, a grey border
    appears around the
    > movie and a tooltip with the following test appears
    "Click to activate and use
    > this control"
    >
    > Is there a way to avoid the initial click before the
    user can navigate using
    > the buttons in the flash movie?
    >
    > Thank you in advance,
    > Armo
    >
    >

  • Flash CS6 files do not display in folders insode Flash

    I noticed this glitch in FLCS6 and also DW CS6, for instance, if i crop an image in Photshop and save to a folder, I open the folder and see the file inside. Now I open Flash CS6  and go to add the file ( which is a jpg ) to a Flash ,fla page. But when I open and navigate to the folder the file insode Flash it is not there. I can clearly see the file if I look at the folder outside of Flash
    I have tried this a few times and have no idea why this is.
    I'm in Lion 10.7 as mentioned running FlashCS6
    any help as this is slowing me down.
    RD

    Hi RD,
    I hope you are using File>Import>Import to Stage... menu option to add your jpg file to Flash and not via File>Open. Also make sure that when you use File>Import>Import to Stage.., the Enable drop down in the Import dialog is set to 'All Formats' and is not set to import a specific format other than jpg.
    If you are facing this issue not due to above said reasons, then can you please let me know the following
    1. Is the jpg file you are trying t import placed  locally in your machine or is shared in a network location?
    2. Is drag drop works for the jpg?
    3. Are you on a English OS/Application?
    Thanks!
    Mohan  

  • Can I get flash player for Verizon I phone 4?

    can I get flash player for Verizon I phone 4?

    no such app is available. you might be able to find apps that runs flash apps and converts them into jpgs but straight flash player is not available.

  • Image/Flash/Background Woes

    In my previous setup: I had a background (large) called
    back.jpg. I thne loaded a foreground called front.jpg in a table.
    Then I centered a SWF in the front.jpg that fades in. All the pages
    used this same format but some pages would flash briefly instead of
    nicely transitioning as you navigated to a different page. I got
    the bright idea that I would put front.jpg in the flash so that
    back.jpg would show up and then the swf (with the front.jpg) would
    nicely fade in. Now, when you go to the page, the back appears,
    then a large white box where the flash will go; then the flash
    appears covering the white. --My goal is a nice background, with
    the flash fading in smoothly and centered on the background,
    regardless of your screen resolution. The centering is working, the
    white box appearing does not look professional! I have been told it
    can't be done. Please advise. Attached is the old and new code.
    (The old code is from a simular old style page, but the same
    effect.)

    Describe what you want to accomplish and maybe you will get
    some help. It's unlikely that anyone is going to research some
    code/files that you found.

Maybe you are looking for