Jpgs oversaturate when replicated other places

I don't know if this is a Photoshop problem or a 10.4.11 problem, but it starts with image files created in PS CS3. I create an image file to my satisfaction. If I want to transport it somewhere I create a jpg version using Save As or Image Processor script. Then I drag and drop, cut and paste, or use the Mail Attach function to add the jpg to an e-mail message. When I do, the image is severely over-saturated, as if I had increased the Saturation by +50 or something.
One odd thing is that it just started happening spontaneously about six months ago after years of perfect function: The inserted image looked just like the PS original. I can't imagine what setting I could accidentally change that would result in this. Obviously it can't involve monitor calibration because it all is happening on the same monitor.
Another odd thing: Some people receiving the e-mail see the file as over-saturated, some don't. I created a jpg in Photoshop, then saved a screen grab of it. Then I saved the jpg itself and uploaded both onto the Internet for others in my Macintosh guild to observe. Three of four saw no difference, while the fourth saw a dramatic difference - all remotely on their own computers.
Here's the original jpg in Photoshop, captured by screen grab:
http://i300.photobucket.com/albums/nn24/frmeads/screengrab.jpg
Here's the saved jpg:
http://i300.photobucket.com/albums/nn24/frmeads/Saved-see.jpg
Any ideas?

Hi, Lundberg02,
Thanks for the feedback. FYI, I am not using the Grab function; I am using Cmd-Shft-4, which lets me marquee the screen image area to capture and turns it into "picture 1.jpg" stored on my desktop. That, renamed, is what I uploaded to a remote server for Web perusing. Thus neither of the two sample images I posted for comparison is a tiff. Does that suggest any other explanations, or am I missing something?
I just replicated my process to ensure I am describing it accurately. Picture 1.jpg matches the saturation of screengrab.jpg:
http://i300.photobucket.com/albums/nn24/frmeads/Picture1.jpg
intriguingly, when I opened "picture 1.jpg" in PS CS3 and screen-grabbed it as described above, doing so reversed the process, DEsaturating the image:
http://i300.photobucket.com/albums/nn24/frmeads/Picture2.jpg
Now I am totally mystified. Any more ideas? Keep in mind that the original process of saving a file as a jpg did not involve the Grab tool or screen grab.
[large images replaced with links]

Similar Messages

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

  • I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    Notes:
    1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
    2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
    3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

  • Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now e

    Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.

    Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
    Neill

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo without the original CD?

    When I begin to attempt to download the windows support software in boot camp, it says the windows support software is unavailable. Is there any other place I can download it for a Macbook Pro 5,5 intel core 2 duo with snow leopard without the original CD?

    Hi,
    apart from the MacBook Air this feature is of no use for other Macs right now.
    Simply ingnore it (click "I already have the Drivers...) and continue with the installation.
    Sorry to say but you need the OSX Install DVD for the BootCamp Driver installation.
    The 3.0 version of the BootCamp Drivers is only avaiable on the disc.
    Later updates (3.1 and 3.2) can be downloaded from Apples Support website.
    Call Apple and ask for a replacement and they usually send you one for a small fee.
    And have the Serial-Number of your Mac at hand when calling.
    And since the OSX Install DVD can also be vital for maintenance and repair it is best to have one.
    The needed BootCamp Drivers are on the OSX Install DVD 1 that came with your Mac.
    Insert that disc while in Windows after the Windows installation to install the drivers.
    Regards
    Stefan

  • Always on : Is there any command or other way which tells who and when replica got failover or failback to other replica?

    Is there any command or other way which tells who and when replica got failover or failback to other replica?
    Rahul

    By Monitoring of Availability Groups:
    Monitoring of Availability Groups (SQL Server)

  • Illustrator CS3 crashes when trying to place an item

    I'm running CS3 on an iMac running OS 10.5.8.
    Just recently (the past few days) my Illustrator has been crashing when I attempt to place a file. I've attempted to place a variety of files (.jpg, .eps, .PSD) and usually Illustrator would crash after selecting the file to be placed. Now it is crashing upon selecting 'Place' from the 'File' menu.
    I attempted this fix (http://kb2.adobe.com/cps/402/kb402521.html) and it did not resolve the issue. I also checked to see if possible it was trying to open a directory that no longer exists when I choose 'Place' from the 'File' menu, but that also is not the issue.
    Any input on what could be wrong? Thank you!

    Thank you for that link! While none of the 'technical' suggestions worked (replacing files in the Version Cue folders in Library/Application Support) a lower-tech solution has seemed to work. Simple disable Version Cue in the preferences panel of Illustrator (I'm not using it anyway). So far so good! Who would have known such a low-tech solution would work!
    Thanks again & I'll report if this seems to be a permanent solution or not. I just find it strange that Illustrator just started behaving this way when I don't believe Adobe Updater has updated my CS3 in over a month.

  • I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • Modify vendor number when replicating vendor master data from ECC to SRM

    Hi,
    Is there a way  to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
    Does anyone have documentation on the user exit, how do I use it??
    Thanks and Regards'
    David

    Hi David,
    Please go through the link below:
    [Enhancement SAPMF02K Vendor Master Data  - question about LIFNR;
    Regards
    Anirban

  • Error when replicating materials

    Hi,
    We are on SRM_SERVER 500 (SRM 5.0), Support pack SAPKIBKT06.
    When replicating materials - we faced the following error.
    In SMQ2 we get an error message - <b>SYSFAIL - Error in Mapping (Details: transaction SMW01)</b>
    In SMW01 I am able to see some error messages -
    <b>No product ID determined for material number P2P SUPPLIES of logical system P2PCLNT100</b>
    But we have created the product P2P SUPPLIES in the R/3 system.
    Can someone explain what needs to be done?
    Thanks,
    Srivatsan

    Hi
    <b>Please go through the SAP OSS Notes -></b>
    Note 656823 FAQ: Tips and tricks for transfer debugging
    Note 1049166 Memory consumption in BDoc inbound processing too high
    Note 916547 Problems with language fields in MDMP R/3 backend systems
    Note 916708 Problems with language fields in MDMP R/3 back-end systems
    Note 429423 CRM Release: General analysis of the initial Load
    Note 928465 ISUCRM: Hanging entries in inbound queue SMQ2
    Note 441352 OPEN-FI event 00501015 is executed unintentionally
    Note 891889 ISUCRM: SYSFAIL during replication after product change
    Note 721107 Correcting delivery and billing status in the CRM system
    Note 510192 Meaning and maintenance of the CRMRFCPAR table
    Note  537821 RFC dest. <ENTER MIDDLEWARE DESTINATION> does not exist
    Note 543999 Assignment between adapter object and application component
    Note 309734 CRM/EBP server: General analysis of initial load
    Note 378580 incorrect sorting in SMO8_LOG_FLASH
    Note 489215 CRM 3.0: Queues are blocked
    Note 571486 After import of support packages: R3AD queues hang
    Note 309734 CRM/EBP server: General analysis of initial load
    <u>Hope this will help. Do let me know.</u>
    Regards
    - Atul

  • PI 7.0 - SMICM - Host Name - Conflict with other places

    Hi Friends,
    We have host name conflict in SMICM and in other places.
    For example, in SMICM it shows the host name 'A' for HTTP protocol and it is green, where as in other places like in RZ10 (Profiles in ABAP), Exchange Profiles (Connection Parameters, Host name), in SLD and in Visual Admin the host name is mentioned as 'B'.
    At present, the messages are failing in SXMB_MONI with the error "CLIENT_RECEIVE_FAILED 402 ICM_HTTP_TIMEOUT  ".
    When we checked the paramter "icm/host_name_full" in RZ11,it shows the empty value.
    This problem comes in our quality PI system, ABAP stack.
    Could you kindly clarify in SMICM for the HTTP service from where the host name is taken and displays here?
    Kind regards,
    Jegathees P.

    Connect to the operating system. Check this file (replace xxx with your SID and, if applicable, 00 with the correct instance):
    C:\usr\sap\xxx\SYS\profile\xxx_DVEBMGS00_ILBNKxxx
    Find this line:
    icm/host_name_full = hostname.company.corp
    Is this maybe empty / incorrect / incomplete?
    After changing this the server needs to be restarted.
    Sometimes we had strange behaviors after host name changes, which went away after going to sicf -> execute -> right-click on default host -> deactivate -> right-click again -> activate -> in the pop-up click the second activate button, which is for activating the system and all dependent entries.

  • Preview shrinks JPG's when added to PDF

    I have an existing .PDF file, and if add a new page, then drop a .JPG file onto it, the picture shows very small with a large white border. In the Slideshow view it also appears very small.
    If I open the .JPG on it's own in Preview, the picture shows as the correct size, but if I save it as a .PDF then re-open it has shrunk again. If I look at the info for the file, the dimensions are 612 * 792, whereas the .JPG file is 969 * 1331.
    Why does Preview shrink .JPG pictures when added to an existing PDF, or saved as a new .PDF?

    Edited to add - sorry, my description was slightly wrong.
    If I open a single .JPG in a new Preview, and save it as a .PDF, the dimensions are fine. The issue only occurs if I try to add .JPG's to existing PDF's.
    It also occurs if you use the shell to convert a single JPG image, i.e.
    "/System/Library/Printers/Libraries/./convert" -f /users/me/downloads/cvg06300162.jpg -o /users/me/downloads/cvg06300162.pdf
    - this gives the reduced size image as well.

  • The Firefox window pops up on a regular interval when any other program is being used, even when a film is playing in full screen mode from Firefox.

    The Firefox window pops up on a regular interval (I think every 5 or 10 min) when any other program is being used, even when a film is playing in full screen mode from Firefox. It does not happen if Firefox is not running (i.e. it does not start by itself). The OS is Windows 7 SP1 and this begun after installing the Firefox update 5.0.1. Exactly all programs are updated with the latest version, the computer is clean according to Microsoft Security Essentials. Please solve this problem.

    -> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
    -> go to Help Menu -> select '''Restart with Add-ons Disabled'''
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted/Incompatible Toolbars
    -> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click '''Clear Now'''
    -> go to Tools Menu -> Options -> General -> in '''Startup''' section click '''Reset to Default''' button -> place Checkmark on '''Show the Downloads window when downloading a file''' -> select Radio Button option2 '''Always ask me where to save files'''
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
    -> Click OK on Options window
    -> click the Favicon on SearchBar -> click '''Manage Search Engines''' -> select all Unwanted Search Engines and click '''Remove''' -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
    -> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
    -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons and Themes later. Check and tell if its working.

  • Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

    Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

    I have tried much of the same - still no joy.
    I also reported it as a bug to Apple although the response page said "we can't reply to messages"
    For now I have had to turn off auto syncing and keep plugging and unplugging until the device is recognised correctly - about 1 in 10.
    In my email to apple I also listed the contents of the xml file that keeps track of the devices that iTunes has seen:
    When seen as an ipad:
    <dict>
    <key>Connected</key>
    <date>2010-06-08T21:33:57Z</date>
    <key>Device Class</key>
    <string>iPad</string>
    <key>Family ID</key>
    <integer>10006</integer>
    <key>Firmware Version</key>
    <integer>256</integer>
    <key>Firmware Version String</key>
    <string>3.2</string>
    <key>ID</key>
    <string>8F98884620E0F9FF</string>
    <key>Serial Number</key>
    <string>V5020116Z39</string>
    <key>Updater Family ID</key>
    <integer>10006</integer>
    <key>Use Count</key>
    <integer>21</integer>
    </dict>
    When seen as an iPhone:
    <dict>
    <key>Connected</key>
    <date>2010-06-08T21:39:07Z</date>
    <key>Device Class</key>
    <string>iPhone</string>
    <key>Family ID</key>
    <integer>10006</integer>
    <key>Firmware Version</key>
    <integer>256</integer>
    <key>Firmware Version String</key>
    <string>3.2</string>
    <key>ID</key>
    <string>8F98884620E0F9FF</string>
    <key>Serial Number</key>
    <string>V5020116Z39</string>
    <key>Updater Family ID</key>
    <integer>10006</integer>
    <key>Use Count</key>
    <integer>22</integer>
    </dict>
    You will see from the Use Count that these are adjacent connections, ie plugged in as ipad then as iphone. Apart from the device class, everything else is the same.

Maybe you are looking for