JRA "Execute Function" Option in MII 12.1.8.24

We recently upgraded our MII instance from 12.1.4 to 12.1.8.24. MII is running on NetWeaver 7.01 sp08.
We have noticed a drastic change in the way that "SAP JRA Function" Action block works after the upgrade. The "Execute Function" Check Box appears to be the culprit. Prior to the upgrade, selecting the indicator for "Execute Function" resulted in the RFC being executed and returning results. Not checking the box would simply result in the XML Structure being available. This lined up with the SAP Help definition for JCO which can be found here: http://help.sap.com/saphelp_mii122/helpdata/en/45/a3da12c3b50cefe10000000a114a6b/content.htm
Now that we have upgraded the "Execute Function" results in the following:
- When selected the RFC is not called and no results are returned.
- When NOT selected the RFC is called and the results are returned.
I am hoping someone else has already encountered this or can tell me I am doing something wrong.
Thanks

If I interpret that correctly, it would be NW CE 7.11 SP6. I was not aware that SP6 had been released yet, but I am pretty sure that the installation instructions for MII 12.1.8 will specify SP5 as the version to use. MII and NW versions really do need to align correctly. This may be the cause of the JRA problems you are experiencing.
I would suggest you verify the NW version and Service Pack with the Basis folks (and reread the installation instructions for 12.1.8 build 24) and make sure the two versions are correctly matched.
Good luck!
Mike
Edited by: Michael Appleby on Mar 10, 2011 8:26 PM

Similar Messages

Jco exception thrown while executing function "BICS_PROV_OPEN" against syst

Hi,
Am implementing SAP EP, BI Integration. The BI Querys are running fine, but when i try to run a BEx Application Query am thrown with this exception in portal.
Exception caught: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "BICS_PROV_OPEN" against system "SAP_BW" com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "BICS_PROV_OPEN" against system "SAP_BW" at
I've done all the configuration for the integration and the BI Diagnostic tool is showing all the configurations to GREEN.
Please help me on this...
Regards,
mcsekar

Exception caught: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The current application triggered a termination with a short dump. com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The current application triggered a termination with a short dump. at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516) at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1514) at com.sap.mw.jco.JCO$Client.execute(JCO.java:3980) at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417) at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Proxy.executeFunction(Jco640Proxy.java:362) at com.sap.ip.bi.base.application.service.rfcproxy.impl.jco640.Jco640Function.executeRfc(Jco640Function.java:75) at com.sap.ip.bi.base.application.service.rfcproxy.base.RfcFunction.execute(RfcFunction.java:46) at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.variableprocessor.RfcServiceWithVariables.executeCreationFunctionForVariableHandling(RfcServiceWithVariables.java:64) at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.isApplicable(ProviderSelectionObject.java:339) at com.sap.ip.bi.base.application.impl.Application.checkAndCreateService(Application.java:709) at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:634) at
Exception caught: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "BICS_PROV_OPEN" against system "SAP_BW" com.sap.ip.bi.base.exception.BIBaseRuntimeException: Jco exception thrown while executing function "BICS_PROV_OPEN" against system "SAP_BW" at com.sap.ip.bi.base.application.service.rfcproxy.base.RfcFunction.execute(RfcFunction.java:48) at com

Getting error in executing Select options

Hi Experts,
I am getting error in while executing select options in multiple selection range options in SCASEPS Transaction in PSRM module.
suppose I am giving 500 records in a select options ( select single values tab) while executing i am getting message like "; general Error" , i am not getting values.
can any body provide the solution.
Thanks !
Mahendar

Hi Mahendar!
I sorry, but the parsed SQL-statement must not exeed a limit of a defined size (is hardcoded restriction of DBMS).
A workaround could be to use the SELECT ... FOR ALL ENTRIES-Statement!
Kind regards
Peter

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Problem in executing function module: ERROR_IN_PDO: ERROR_IN_PDO

Hi all,
I am getting an error I can't solve until now.. Who can help?
The Default Trace in the EP 7.0/NWA gives the following information:
Severity: Error
Message: Problem in executing function module:[date]:com.sap.mw.jco.JCO$AbapException: (126) ERROR_IN_PDO: ERROR_IN_PDO
Category: /uwl/service
Location: com.sap.netweaver.bc.uwl.core.connect.abap.FunctionModuleActionHandler
Application: sap.com/tcwddispwda
The UWL connection tests are correct! So, who can help!
There is nothing to find in sap notes or sdn forum
Best regards,
G. Leurs

Hi john,
I am also facing hte same issue.
when the user is trying to approve the Compleated shopping cart from the button availble in the UWL preview , I am getting the below error.
Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.mw.jco.JCO$AbapException:ERROR_IN_PDO
we are not passing any ABAP role from teh SRM system.
it would be great if you can share your views regarding this.
Raji

Executing Function Module SXI_GET_SLDDATA

Executing Function Module SXI_GET_SLDDATA with input IM_SLD_NAMESPACE = " " gives following message in EX_ERROR_TEXT
Connection to SLD not possible: Exception in SLD client: AbapSLDRequestHandler.ping(): server connection ***failed *** on Fri Feb 01 15:50:22 GMT+05:30 2008
Can some one please adise how do I get list of business systems defined in SLD in the output table EX_BUSINESS_SYSTEMS ?
Please suggest a fresh approach to get any output from this FM including any particular settings that need to be done in trasaction rz70 Visual Admin of WAS, Hostfiles in respective communicating servers

Hi Catherine ,
The function module uses assorted tables in import parameters and hence can not be tested as others.
SAP provides a report CRM_ORDER_READ to test the function module.
Thanks.
Praveen.

When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator)

Mac OS X 10.6.7
CS 5.5
When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
This is intermittent but happens quite frequently each day if Firefox is active.

MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
When I use
firefox.exe -chrome about:permissions
I get a usable window, but zoom doesn't work as you noted.
How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
https://developer.mozilla.org/docs/Web/API/Window.open

Execute function before layout display

Hi.
I created planning folder where I assigned function to layout and set its Function attributes equal to
Execute function before layout display.
When I execute my planning folder from SAP GUI everything works fine.
But when I generate Web interface on base of planning folder and execute that one, function is not performed and
corresponding to function button appears.
What should I do in order that function is automatically executed from web?

Hi Marc,
The planning function is supposed to do that i.e. based on certain other variables change the data in the layout. After the data is locked obviously there should not be any changes.
What I was trying to achieve is somehow to be able to access the Planning Folder even though the pre-function is run. Else we would have to go with the way you suggested i.e. create either a separate folder or create a separate layout with no Planning Functions attached. The issue becomes the user has to first get the error message.. realise that the data is locked and then go to another layout / folder.

Powershell error while importing module and executing function from module

powershell error while importing module and executing function from module
Function called in uncertain order..
VERBOSE: The 'Function1' command in the MyModule module was imported, but because its name does not include an approved verb, it might be difficult to find. The
suggested alternative verbs are "Clear, Install, Publish, Unlock".
VERBOSE: Importing function 'Function1'.
VERBOSE: The 'Function2' command in the MyModule' module was imported, but because its name does not include an approved verb, it might be difficult to fin
d. For a list of approved verbs, type Get-Verb.
VERBOSE: Importing function 'Function2'.

First of all those errors look more related to HBR, though if it worked before I would restart services then log into the planning app and then try again.
Have you tried a different form as well one without an ampersand &.
Cheers
John
http://john-goodwin.blogspot.com/

How to execute function having return cursor

hi all
Please tell me
How to execute function having return cursor
regards

CREATE OR REPLACE FUNCTION sp_get_stocks(v_price IN NUMBER)
RETURN types.ref_cursor
AS
stock_cursor types.ref_cursor;
BEGIN
OPEN stock_cursor FOR
SELECT ric,price,updated FROM stock_prices
WHERE price < v_price;
RETURN stock_cursor;
END;
SQL> exec :results := sp_get_stocks(20.0)
PL/SQL procedure successfully completed.
Message was edited by:
chenks

Error msg: Unable to execute function 'OBSOLETE' successfully

i am getting the error message "Unable to execute function 'OBSOLETE' successfully" for a WAIT FOR EVENT workitem. because of this error the folowing steps are not getting executed.
can anyone help me with this issue.
cordially,
sanjay.

Hi Sanjay,
Firstly please always tell us which release you are using.
Secondly, check the Outcomes tab of your wait for event step - you may have turned on the obsolete outcome accidentally.
Regards,
Jocelyn

Error "Unable to execute function. (USER_ID=1087)"

Hi,
I got the error message when I access the R12 login link. I tried to restart the application but it doesn't help. Do anybody know how to fix it? Thanks.
"Unable to execute function. (USER_ID=1087)"
Edmond
Edited by: Twenty4billy on Sep 13, 2012 6:30 PM
Edited by: Twenty4billy on Sep 13, 2012 6:30 PM

Please post the details of the application release, database version and OS.
I got the error message when I access the R12 login link. I tried to restart the application but it doesn't help. Do anybody know how to fix it? Thanks.
"Unable to execute function. (USER_ID=1087)"
EdmondWas this working before? If yes, any changes been done recently?
Can you find any details about the error in Apache log files?
Any errors in the database log file?
Please run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

Web Interface - "Execute function before displaying the layout" issue

Hi Experts,
In my project we have converted some BPS planning folder to Web interface. The steps are as below:
1) Open the BPS planning folder using upspm. Copy the web interface as Web Enabled folder.
2) Generate the web interface by clicking on go to --> Generate web interface
3) Run transaction bps_wb. Open the web interface. Then generate web interface again
4) Run the web interface by clicking on 'Display perview'
5) In the web interface there are some some functions which get executed before displaying the layout.
6) For such functions, push button gets created.
7) I have set the visible property of such push button as false.
8) Most of the time, when I am running the web interface, it
is getting executed successfully.
9) Some times, the web interface is not displaying the layouts successfully.In such cases I have observed that "Execute function before displaying the layout" is not working. Due to this some values like Fiscal Year is not getting set. So, the layout is not getting displayed.
10) I understand that it may be due to compilation error.
For example, I might have made some changes in the web interface. It must be saved and web interface must be regenerated before I diplay the interface again. Can you please help me in understanding the reason of this problem.
11) Can you please help me understand the cause of point no 9. Is it a non-issue? What may be the reason that "Execute function before displaying the layout" does not work every time.
Thanks

Will a function that runs, before the data gets saved, work for you? You can configure such a function to run before the save command behind the save button you create in the planning application.

IW32-Do not execute function reset required

Hi
We have done Do not execute function by mistake in service order IW32 and so the order has been closed.
Can you please tell us how to reset the Do no execute function in iw32
Regards
Swetha

if you set the do not execute the sys status is usually
CLSD NCMP
if that is the case you cannot reopen it
create a new order by copying this one
OR
write a quick ABAP to remove the status NCMP for the order from the back end tables (not a good practice from audit perspective)

Not Photoshop screen for executing functions

I have dowloaded Photoshop CC on a trial basis but can't seem to execute anything other than the tutorials. I don't get the screen from which to execute functions. what have I done wrong?
Message was edited by: Brett N

A trial version of Photoshop is fully functional, there isn't anything that is restricted. What screen are you looking for? What functions are you trying to execute? Generally, the functions in Photoshop are executed from the Menu bar, the tools panel, or the other panels (Layers, Actions, History, etc). There is no screen for running functions. Unless you are refering to the Photoshop UI itself.
But you mention that you are able to run tutorials. What tutorials would those be? Photoshop doesn't come with any. Perhaps you have something other than Photoshop installed?

JRA "Execute Function" Option in MII 12.1.8.24

Similar Messages

Maybe you are looking for