JRE 1.4 autoupdate doesn't work for multiple users

In trying to simulate an environment where most users don't have administrative rights I tried this little test.
Install Webstart with JRE 1.3.1 or whatever
Have my app look for 1.4 in the JNLP file
I installed webstart and had it run the autoupdate, like it should, while logged in as an admin. when I then logged in as a standard user, i get this error popup
Bad installation. Error invoking Java VM (SysExec)
c:\Program Files\Java Web Start\.javaws\cache\.ext\E1022773239667\bin\\javaw.exe
Anyone have any ideas? It works fine under the admin account, but this under user account.
Matt

It is possible to install a 1.4.0 JRE (which will also install JWS) as normal user without admin rights, but with enough rights to install apps on his disk.
However I don't know what happens, if several users on the same machine do this.
Will they end up with k individual installations or will there be some interference?
Among the information that leaked on the next Java version 1.4.1, which includes a new JWS version 1.0.2, it was told that it will be made multi user capable.
Regards,
Marc

Similar Messages

RD Session Broker + NLB doesn't work for external users (internal users on network/WAN are OK)

Hi all,
I have run into an issue as the title of this question suggests.
So the senario is, I have (all Virtual):
2x 2008 R2 Remote Desktop Servers
1x 2008 R2 with Session Broker install
I haven't configured any RD settings on the session broker server (i.e. RD virtual desktop, RD Gateway, etc) It's purely setup as the RD Connection Broker
Each of the RD servers I have configured 2 NIC's. The 1st NIC is configured with NLB (NLB only setup for traffic on port 3389 all other traffic isn't handled by NLB). The other NIC is configured to be used only for session reconnection. I'm hoping this is
the right configuration as it's how I have interpreted these guides:
http://technet.microsoft.com/en-us/library/cc772418%28WS.10%29.aspx
http://technet.microsoft.com/en-us/library/cc771300%28WS.10%29.aspx
Please correct me if I have setup the servers incorrectly and what should be differently.
I have setup the NLBs Cluster IP. A rule has been set on the router to make it available externally
This worked fine with an old single RD Server (same IP as NLB Cluster IP, currently offline so no conflict) before the RD Farm was implemented. So I know the port forwarding is OK.
So NLB and Connection Broker Load-Balancing work well for users inside the network. It spreads sessions evenly and there is no problem with DNS resolving the farm name etc. Sessions that are disconnected are reconnected to the same server, etc.
Accessing the TS Farm from the external address isn't so successful
Connectivity is random. Rarely it works, sometimes it gets to "initiating remote connection..." and then disconnects. It doesn't work more times than it does.
So what do I need to do to get this working? Is there another component or something else that I need to configure to get it all working?
I look forward you your help
Thanks,
Trent

Hi Trent,
If both the RD session broker and the NLB are working fine in
the internal network, I suspect that there is something wrong with the external connection. I’d like to confirm the following questions to narrow down this issue:
1.
Can you PING and telnet this RDS farm name when encountering the “disconnect” issue? For example: telnet farmname
3389.
2.
Can you individually connect to the RDS server when failing to connect it via farm name?
3.
Did you configure any certificate on the RDS server or RD gateway server?
4.
Do you get any event log when this issue happens on the server and client side? If yes, please let me know it word-by-word including the event ID.
Thanks.

Pt:ptdata.currcommunitydata ... doesn't work for guest user?

The question has been asked before, but it doe'snt work for me when i' mnot logged in:
Re: Adaptive Tags: currcommunitydata
Quick look at the source code... why does it check if the current user is community owner?
// current community URL
XPArrayList urls = TaskAPIUICommunity.GetURLForCurrentCommunity(TaskAPIUICommon.GetEnvTypeObject(env));
/// <summary>
/// Gets an XPArrayList with a single entry for the URL for the current Community.
/// </summary>
/// <param name="owner">Current Activityspace.</param>
/// <returns>
/// <c>XPArrayList</c> list containing a single URL to the current Community,
/// or <c>null</c> if the URL is not valid in the current context.
/// </returns>
/// <throws>
/// XPIllegalAccessException
/// If the user does not have sufficient access to the Community.
/// </throws>
public static XPArrayList GetURLForCurrentCommunity(AActivitySpace owner)
TaskAPIUICommon.ValidateActivitySpaceArgument(owner);
// This will get the Parent activity space if the current space is not CommunityAS
// We need to pass in the correct space for the checks below.
AActivitySpace communityAS = TaskAPIUICommon.GetMyPageOrCommunityAActivitySpace(owner);
if (communityAS == null)
return null;
// get the URL
CommonOpenerOpenObjIDURL url = null;
if ((communityAS.GetAccessStyle() != AccessStyles.SECTION_508) && IsCommunityActionsDisplayable(communityAS))
if (IsCurrentPageCommunityPage(communityAS) && IsCurrentUserCommunityOwner(communityAS))

Hello Joel,
This is bug 7822790. The problem is that the code wants the user to have Edit or higher or else it returns no data. I would recommend that you open up a ticket with support and tell them that you simply want to get the case associated with the bug. There is no workaround, but doing this will give it more weight in the future.
Thanks,
Mike

Hp f380 scanner doesn't work for normal user

I have a problem concerning my scanner. It works well (after few issues after the upgrade of hplip) under root, yet it does not work under user. It would work for half a year but after one of lasts upgrades it does not any more. My user is added to scanner group of course.

simple. I got similar issues with my cx3900 all-in-one.
What I did is to create a udev rule to force the related devices to be owned to specific group.
For instance
/etc/udev/rules.d/goddamned_scanner.rules
ACTION=="add", BUS=="usb", ATTRS{idVendor}=="Vendor", ATTRS{idProduct}=="Product", MODE:="0660", GROUP:="scanner"
Note the ':=' on the GROUP and MODE field.
replace Vendor and Product by the information supplied by the output of lsusb (vendor:product) and reload the udev ruleset with:
udevadm command --reload-rules
Last edited by kjon (2009-02-28 16:00:51)

Edit capture time doesn't work for multiple images

Hi all, hope you can help me.
I'm trying to edit capture time for multiple images. I select the images using the grid view, and go to Metadata>Edit Capture Time>Adjust to Specified Date and Time, enter the time, and select "change all." However, it seems that some, or perhaps most of the images don't actually have a new Date Created when this process is done.
I thought perhaps I needed to select 'write metadata to files', but the Date Created seems to revert back prior to writing to the file, or indeed, it doesn't actually change in the first place.
Any ideas?
Thanks,
J

Think I've fixed this using the following site: -
http://www.thexlab.com/faqs/helpviewer.html
Will update if that changes....

Submit button for online PDF form doesn't work for some users

Two online forms I've created in LiveCycle Designer 8.2 work fine for me. But when some of my site's users click on the Submit button in either form, it simply flashes and then does nothing. It's a standard Submit button with a Mailto link. The documents are PDF Version 1.7, and I'm using Acrobat Pro 9.4.5 and Reader 9.4. Any suggestions on troubleshooting would be great.

Has this form been enabled with Form Rights for Reader. If the entire PDF is submitted, then the PDF must be Reader enabled to operate on Reader.
Another issue is that an email submit is entirely dependant on the user's system. There must be a local email client installed and registered with the system. Internet email will not work. This is the most likely issue. Althougth there are other things that could be wrong. You might want to consider using the Acrobat.com to distribute your forms. This method gets around the email issue for most users.
Other issues that could cause this problem are the users' version of Acrobat/Reader as well as any kind of funky system/security setup.

Applying rules manually doesn't work for multiple messages

I've been using Mail for some time now and love rules. Love 'em. A few months ago I started having touble and have not been able to figure it out.
The rules get applied to new incoming messages properly, as they should. However, I used to be able to select all the messages in my inbox (Command + A) and then 'Apply Rules' (Option + Command + L). That command no longer works. It still works if I go and select a bunch of eBay-related e-mails, for example, and then Apply Rules. Those message are moved accordingly. But if I select all message and Apply Rules, those same 4 or 5 messages remain put in the inbox even though there's a perfectly functioning rule for them that should be applied.
NOTE: NONE of my rules work when I select all and Apply Rules.
Any suggestions?

The reason there are messages in my inbox to which rules haven't been applied is because when I'm at work I check my mail via the web (I use FastMail.fm). At home, using Mail, I access my mail via IMAP. When I receive and read new messages via the web and then go home and open Mail, all the messages in my inbox are no longer new, incoming messages so Mail doesn't process them as such. But just because they're not new incoming messages doesn't mean they belong in my inbox.
Does that make sense?
Most of the rules are to Move messages to folders based on categories (Shopping, Forums, Hosting, etc.).

Ios 8 bug: keychain autofill doesn't work for multiple accounts on the same website

WIth the IOS 8 update I have an issue. I have, for my job, to check several and different accesses on the same website. The autofill function is now proposing just the last entered user-password, even if all the credentials are regularly stored in the keychain. Same behavior on my ipad air and my iphone.
Has anyone the same problem?
THanks in advance for your help

An update. If I:
Enroll a Windows Surface using a local admin account
Request to install an app from a local standard account it appears stuck on Installing...
Log back in as the local admin account and wait, the app appears.
Questions:
Can the same app be installed into multiple local accounts on the same device? It doesn't look like it.
Is the local account used when the device is enrolled the only local account that will install Intune apps?
-jd

Gmail app doesn't work for multiple accounts???

I just got an iphone5 and I'm super bummed to find out that the Gmail app does not allow you to switch between two accounts, as it does on my Android phone.
What do people use to get around this?

I had the same problem none of that works...
This is what I did:
Using the adm profile, go to the windows folder, find the
regedit icon, open it, then scroll all the way down until you find
the shockwave files. Right click on each and the click on
permissions, give each user persmission and do it for all the
shockwave flash floders you see, it should be about 9.
good luck.
need help call me 305 228 7574, EST until 10pm.

Agent Assignment Doesn't work For Some Users

Hi all,
In OOCU_RESP there are four agents in a responsibility. But only one (say A) of the four gets tasks in Inbox. The other three (say B, C, D) get nothing.
I removed A from the responsibility and B, C, D still get nothing. In SWIA the log shows no agent assigned. But in SWI2_DIAG there is no error info.
In OOCU_RESP, Simulate rule resolution, i can get all 4 agents assigned.
I feel like there is something wrong with B, C, D's SAP account settings. But I have no clue what it can be. Advise please!

Hi Dayong
Please check the Agent Assignment settings of the task used for sending the WI to the users. Is the task set to General task or specific agents are listed there?
PFTC->Supply the Task-> Additional Data -> Agent Assignment
Also, check if these agents are listed in Excluded agents in the Workflow Step.
regards,
Modak

Firefox 5.0 not Working for Multiple Users Sharing the Laptop

Hello All,
I upgraded Firefox from 3.15 to 5.0 using my user ID (admin) in Vista Business SP1. The same copy of Firefox 3.15 also used to work fine under my son's user id. The new install of 5.0 works fine under my user id but immediately freezes under my son's id. I reinstalled 5.0 in the same location under my son's user id but no change.
I can get Firefox 5.0 to work under my son's login by running it as administrator but then only my bookmarks, etc. load. None of his profile or bookmarks are present.
Any ideas on how to fix this?
Thanks...
Neil

Google needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar '''7.1.20110512W''' version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%.<br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
Google Labs has been working on a GTB 8 version, but it looks like it isn't made for Firefox - just for Internet Explorer. <br />
http://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588#toolbar_info <br />
So, maybe Google isn't going to be supporting Firefox any longer. That might be a move to force Google Toolbar users over to Google Chrome, which I believe has all those features built-in.

Outlook autocomplete cache stops working for multiple users at the same time

Hi there
Ever since we upgraded our Exchange 2010 to Exchange 2013 we have had problems with the autocomplete cache in Outlook 2010.
We have 700 users and about once per week I get a call about the autocomplete cache. A few users are on cached mode, but most use online mode. The problem appears on both, but it can usually be corrected by /cleanautocompletecache.
Granted, the autocomplete cache gets corrupted sometimes, but it seems to happen a lot for us. I have noticed that often more than one user experiences the problem at the same time, and, since the problem starting after upgrading Exchange, I suspect that
the issue is with Exchange and not Outlook. Yesterday three users complained about the cache at the same time.
I know how to get a broken cache going again - that is not the issue. The issue is keeping this from happening so often.
Anyone out there able to help?
Thanks!
/Anders

Hi ,
Based on my knowledge , when you tried to send an email to a recipient in the same exchange organisation then the recipient address will be resolved in to legacy dn value and then that email will be delivered to destination mailbox by pointing towards to
that legacy dn value.
For the external recipients exchange user the smtp address to get it delivered.
For your issue :
Based upon the NDR message , we need to covert those values in to x500 format and add it to respective recipient mailbox as an x500 address.Then These erorrs will happen if the x500 value of the destination recipient is not available on it's maibox
and that would be the cause of the NDR for most of the times.Some time as you said autocomplete cache would get corrupted on the client end but it is very rare.
How to convert NDR to x500 address format :
http://msexchangeguru.com/2012/03/15/x500/
How to avoid getting such kind of NDR'S :
https://www.simple-talk.com/sysadmin/exchange/exchange-e-mail-addresses-and-the-outlook-address-cache/
In case if you don't want the users to use the autocomplete cache when composing the new emails :
In group policy we can use the office templates to disable the below mentioned option.
1.use autocomplete to suggest the names ---> this option will comes under the advanced settings on the outlook client.
In case if you don't want the users to use the autocomplete cache when composing the new emails as well as if you wanted to delete that autocomplete then you need to choose one more option along with the first one.
1.Empty autocomplete cache.
Please reply me if anyhitng is unclear.
Thanks & Regards S.Nithyanandham

Oracle client 9i doesn't work for windows ordinary user

Hello All,
I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
Incorrect environment variable PLUS_DFLT
Program execution error.
i also need access to Oracle ODBC driver.
When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
Could not load the setup or translator library
Very appreciate for any help.
Regards Arkadiusz Masny

It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
HTH Mark F

Outlook Anywhere not working for some users

Hi All,
I am having a strange issue today with a customer -
Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
"Testing the MAPI Mail Store endpoint on the Exchange server."
"Attempting to log on to the mailbox"
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.
On users that are able to connect it goes through the ExRCA without any issues.
Any help would be much appreciated.
Cheers,
Jack
Testing the MAPI Mail Store endpoint on the Exchange server.
An error occurred while testing the Mail Store.
Additional Details
Elapsed Time: 333 ms.
Test Steps
Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
The endpoint was pinged successfully.
Additional Details
Attempting to log on to the Mailbox.
An error occurred while logging on to the Mailbox.
Additional Details
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.

Hi,
I notice that this issue only impact "some users".
I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
Thanks
Mavis Huang
TechNet Community Support

ALSA won't work for normal user [solved]

hello archers!
alsa on my arch box doesn't work for normal user, just for root. when i attempt to run ogle, it gives this error:
ALSA lib pcm_dmix.c:1102:(_snd_pcm_dmix_open) The field ipc_gid must be a valid group (create group audio)
ERROR[ogle_audio]: Opening alsa pcm device 'default': Invalid argument
FATAL[ogle_audio]: failed opening the alsa audio driver at default
error in the first line accurs even when i attempt to open audio tab in winecfg. googling this error didn't help me. xmms with alsa output doesn't seem to work too giving the same error, it works just with oss output.
hmm, and YES i DO HAVE audio group, and my user IS member of this group.
[root@otovo /]# ls -l /dev/sound/
total 0
crw-rw---- 1 root audio 14, 12 2006-03-09 01:37 adsp
crw-rw---- 1 root audio 14, 4 2006-03-09 01:37 audio
crw-rw---- 1 root audio 14, 20 2006-03-09 01:37 audio1
crw-rw---- 1 root audio 14, 3 2006-03-09 01:37 dsp
crw-rw---- 1 root audio 14, 19 2006-03-09 01:37 dsp1
crw-rw---- 1 root audio 14, 0 2006-03-09 01:37 mixer
crw-rw---- 1 root audio 14, 16 2006-03-09 01:37 mixer1
crw-rw---- 1 root audio 14, 1 2006-03-09 01:37 sequencer
crw-rw---- 1 root audio 14, 8 2006-03-09 01:37 sequencer2
can anyone help me? or should i provide more information?
thanx & greetings
ota

I've found it!
groups run under user gave just gids of groups, whilst under root it gave proper names. so i took look at /etc/group and here is the problem :shock:
[root@otovo etc]# ls -l group
-rw------- 1 root root 427 2006-03-09 01:32 group
i've changed permissions to a+r and it's working.
thanks Gandalf, you've helped to save the Middleearth again .
ota

JRE 1.4 autoupdate doesn't work for multiple users

Similar Messages

Maybe you are looking for