JRE kernel installation crashes when installing additional components

Lately I've been having the problem that when using deployJava.js with installation type 'kernel' to install the latest JRE, the java plugin crashes when returning to the referrer page. What happens there is that 'additional components' are being tried to get installed but the progress bar will stop in the middle, incrementing the remaining seconds infinitely. I then have to kill the browser and several java processes. If I then return to the page again in most of the cases the applet will start up just fine...
In my memory it could well be that problems started when the kernel installer was updated to version 6u14, but I'm not sure about this one.
I can reproduce the problem reliably on javafx.com/samples (choosing the first) with Windows XP SP2, Windows Vista x86/x64, and Windows 7 x86 with all of IE6, IE7, IE8, FF3.5, Chrome 2 and Safari 4, both without any previously installed JRE and with older JRE (1.2 and 1.3).
Thus I wonder whether anyone has observed this problem too, or is there a weird issue which I happen to have with all my systems I tested with?
Any hints will be appreciated.
Regards,
Vight

Am I the only one having this problem? As I said I can reproduce it on every Windows OS with any browser and older Java installed or not. As a test case I used [http://www.javafx.com/samples/ProjectManager/index.html] and one should think that it would be in Suns interest that this site works. Maybe I should just file a bug, to see whether others can reproduce the problem as well?!
Edited by: vight on Aug 2, 2009 5:10 PM

Similar Messages

  • Jrockit 1.4.2_11 Installation crashes when installing on Debian linux

    I get this stack dump when attempting to install JRockit VM 1.4.2_11 on a Linux box. Is this a problem because the OS is a Debian linux?
    Thanks
    Error Message: Illegal memory access. [54]
    Signal info : si_signo=11, si_code=2 si_addr=0x4c
    Version : BEA JRockit(R) R26.4.0-63-63688-1.4.2_11-20060626-2259-linux-ia32
    GC : System optimized over throughput (initial strategy singleparpar)
    : mmHeap->data = 0x8100000, mmHeap->top = 0xc100000
    CPU : Intel Pentium 4 SSE SSE2 NetBurst EM64T
    Number CPUs : 2
    Tot Phys Mem : 3570380800 (3404 MB)
    OS version : 3.1
    Linux version 2.4.27-2-686-smp ([email protected]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Wed Aug 17 10:05:21 UTC 2005 (i686)
    Thread System: Old LinuxThreads
    State : JVM is starting up
    Command Line : -Djava.io.tmpdir=/tmp -Xmx256m com.bea.plateng.wizard.WizardController -mode=gui
    java.home : /tmp/fileYbyAtz/jre142_11/jre
    j.class.path : .:installer.jar:customtasks.jar:pdev-i18n.jar:bids.jar:3rdparty.jar:xbean-2.0.0.jar:jsr173_api.jar:wlw-plaf.jar:comdev.jar:wizard.jar
    j.lib.path : /tmp/fileYbyAtz/jre142_11/jre/lib/i386/jrockit:/tmp/fileYbyAtz/jre142_11/jre/lib/i386:/tmp/fileYbyAtz/jre142_11/jre/../lib/i386
    JAVA_HOME : /usr/local/jdk
    JAVAOPTIONS: <not set>
    LD_LIBRARY_PATH: /tmp/fileYbyAtz/jre142_11/jre/lib/i386/jrockit:/tmp/fileYbyAtz/jre142_11/jre/lib/i386:/tmp/fileYbyAtz/jre142_11/jre/../lib/i386
    LD_ASSUME_KERNEL: <not set>
    JAVA_HOME : /usr/local/jdk
    JAVAOPTIONS: <not set>
    LD_LIBRARY_PATH: /tmp/fileYbyAtz/jre142_11/jre/lib/i386/jrockit:/tmp/fileYbyAtz/jre142_11/jre/lib/i386:/tmp/fileYbyAtz/jre142_11/jre/../lib/i386
    LD_ASSUME_KERNEL: <not set>
    C Heap : Good; no memory allocations have failed
    StackOverFlow: 0 StackOverFlowErrors have occured
    OutOfMemory : 0 OutOfMemoryErrors have occured
    Registers (from ThreadContext: 0xbedff3c4 / OS context: (nil)):

    Sarge has a 2.4 kernel, which is running LinuxThreads rather than NPTL.
    Newer JRockits don't work on LinuxThreads.
    Your options are to upgrade to a 2.6 kernel, or to use an older JRockit.
    JRockit 1.4.2_08 == 81sp5 == R24.5.0 should work on that system.
    Regards //Johan
    Ramdas Hegde skrev:
    I get this stack dump when attempting to install JRockit VM 1.4.2_11 on a Linux box. Is this a problem because the OS is a Debian linux?
    Thanks
    Error Message: Illegal memory access. [54]
    Signal info : si_signo=11, si_code=2 si_addr=0x4c
    Version : BEA JRockit(R) R26.4.0-63-63688-1.4.2_11-20060626-2259-linux-ia32
    GC : System optimized over throughput (initial strategy singleparpar)
    : mmHeap->data = 0x8100000, mmHeap->top = 0xc100000
    CPU : Intel Pentium 4 SSE SSE2 NetBurst EM64T
    Number CPUs : 2
    Tot Phys Mem : 3570380800 (3404 MB)
    OS version : 3.1
    Linux version 2.4.27-2-686-smp ([email protected]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Wed Aug 17 10:05:21 UTC 2005 (i686)
    Thread System: Old LinuxThreads
    State : JVM is starting up
    Command Line : -Djava.io.tmpdir=/tmp -Xmx256m com.bea.plateng.wizard.WizardController -mode=gui
    java.home : /tmp/fileYbyAtz/jre142_11/jre
    j.class.path : .:installer.jar:customtasks.jar:pdev-i18n.jar:bids.jar:3rdparty.jar:xbean-2.0.0.jar:jsr173_api.jar:wlw-plaf.jar:comdev.jar:wizard.jar
    j.lib.path : /tmp/fileYbyAtz/jre142_11/jre/lib/i386/jrockit:/tmp/fileYbyAtz/jre142_11/jre/lib/i386:/tmp/fileYbyAtz/jre142_11/jre/../lib/i386
    JAVA_HOME : /usr/local/jdk
    JAVAOPTIONS: <not set>
    LD_LIBRARY_PATH: /tmp/fileYbyAtz/jre142_11/jre/lib/i386/jrockit:/tmp/fileYbyAtz/jre142_11/jre/lib/i386:/tmp/fileYbyAtz/jre142_11/jre/../lib/i386
    LD_ASSUME_KERNEL: <not set>
    JAVA_HOME : /usr/local/jdk
    JAVAOPTIONS: <not set>
    LD_LIBRARY_PATH: /tmp/fileYbyAtz/jre142_11/jre/lib/i386/jrockit:/tmp/fileYbyAtz/jre142_11/jre/lib/i386:/tmp/fileYbyAtz/jre142_11/jre/../lib/i386
    LD_ASSUME_KERNEL: <not set>
    C Heap : Good; no memory allocations have failed
    StackOverFlow: 0 StackOverFlowErrors have occured
    OutOfMemory : 0 OutOfMemoryErrors have occured
    Registers (from ThreadContext: 0xbedff3c4 / OS context: (nil)):

  • Crash when installing Oracle9i on Windows

    If you have a crash when installing oracle9i on Win 2000
    (for example The instruction at "0x77fca30c" referenced memory blah blah blah), the problem could be your classpath.
    Try the following in a command window:
    cd Disk1 (or wherever you have unzipped oracle)
    set CLASSPATH=
    setup
    I guess it is a bug in the installer. I didn't try to isolate it, my classpath is too big!

    I just checked this again, at work, on my 2000 machine. I changed my locale to saudia arabia and that resulted in the alignment you mentioned earlier. I switched it back to its default english - united states and the alignment is no loner at the right.
    In addition to that my nls_lang setting is :
    AMERICAN_AMERICA.WE8MSWIN1252
    Note though, that simply changing the locale did it for me, regardless of my nls_lang setting.

  • Crash when installed on system that formerly had Pinnacle hardware

    Encore 2.0 (but not 1.5) consistantly crashes when installed on a
    system which has the RALcodec codec installed (My system is a dual 2.8 Ghz Xeon Dell under Windows XP SP2). This codec is installed by a variety of Pinnacle hardware installations such as the DC-1000 and DC-2000. It remains active on the system even after removal of these devices. The symptom is an Application Error after about 20 minutes and the usual offer to send info to Microsoft, even if Encore is simply opened and a empty project created.
    The solution is to rename the Ralcodec and associated files:
    Cachex.dll
    FXlib.dll
    MedMan.dll
    MLPagAX.dll
    RALCodec.dll
    RALCtrl.cpl
    RALMain.dll
    from the C:\Windows\system32 directory, reboot and then delete them.
    Of course your DC-2000 won't work anymore but that is probably not
    an issue.
    Some other details in case anyone cares: The Pinnacle software
    is loaded by Encore because Encore enumerates all installed
    codecs. When loaded, the Pinnacle software
    creates a hidden window called AudioInputWnd and then listens
    for various Windows messages on this window. This processing
    goes on in the background while Encore is running and eventually
    results in the app crash. Note that 3 years ago, when using
    Premiere 6.5 with the Pinnacle DC-2000 I used to get occasional
    crashes when exiting Premiere. The error message displayed at
    that time referenced AudioInputWnd as well. So it appears
    that even back then, with Premiere 6.5, there was a problem with the Pinnacle software.
    The crash of Encore 2.0 doesn't produce a message explicitly
    referencing AutioInputWnd but under Windbg you can
    see that the software is dispatching a message received from that
    window's queue. When RALcodec is removed, the AudioInputWnd
    is not even created anymore when Encore is run.
    I would note that Adobe support was unable to solve this problem and
    suggested the usual unhelpful littany of reinstallation of Encore and
    to update the video drivers when I first called it in 3 months ago. Another person, Dave Shriver also reported essentially identical problems in the Encore forum back in Februrary. The root cause appears to have actually existed in the Adobe certified bundle of Premiere 6.0/6.5 with the DC-2000 before resurfacing in the present form with Encore 2.0.

    The simplest way to reinstall iPhoto and iMovie is to download Pacifist and then extract the relevant applications from the Software Restore Discs.
    Pacifist comes with instructions; this is not a difficult operation and there is no need for erase & install to recover the applications.
    Pacifist is Shareware, but you need not pay the fee in order to use it. Every time that you open Pacifist you will be prompted to purchase a licence. If you feel that Pacifist is worth the money (and I think that it is), you can purchase a licence at any stage.
    If you're a plonker like me, then purchasing a licence will provide justification for third party developers like CharlesSoft to save the day for the rest of us.
    Good luck!

  • Is anybody else experiencing crashes when installing iTunes for Windows?

    Is anybody else experiencing crashes when installing iTunes for Windows?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box (similar to those given above) are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Illustrator CS6 says "installation failed" when installing.

    Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!

    We can't know. You need to provide system information and possibly the install logs:
    Troubleshoot with install logs
    Mylenium

  • Oracle Installer crashes when I try to install ODP

    I've just downloaded the ODP.NET 64Bit zip file for Oracle 10.2
    When I unzip it and run the setup the universal installer starts up but then immediately crashes with the error message "Java(TM) 2 Platform Standard Edition binary has stopped working with the following signature:
    Problem signature:
    Problem Event Name:     APPCRASH
    Application Name:     javaw.exe
    Application Version:     5.0.40.5
    Application Timestamp:     42a019e4
    Fault Module Name:     StackHash_7e30
    Fault Module Version:     6.1.7601.17725
    Fault Module Timestamp:     4ec4aa8e
    Exception Code:     c0000374
    Exception Offset:     00000000000c40f2
    OS Version:     6.1.7601.2.1.0.256.48
    Locale ID:     2057
    Additional Information 1:     7e30
    Additional Information 2:     7e30927b72ad24a506c0ef1853c67e07
    Additional Information 3:     eca3
    Additional Information 4:     eca3c42a52d3a910bcbbf31d07f7069a
    Anyone have any ideas what's going wrong?

    What platform? There's a known issue with that where the OUI crashes when using it on platforms it was not certified on.
    Rather than trying to coerce a 10.2 install (which I'd really recommend against since error correction has ended for it anyway), is there a reason you can't or don't want to use a current 11g version? You can use 11g ODP.NET against a 10.2 database.
    Greg

  • Laptop crashes when installing iTunes 10.7

    Hi
    I've been trying to update to iTunes 10.7 for ages now, but whenever it's installing my laptop crashes and goes to blue screen.
    I'm running Windows Vista Basic 32-bit.
    Anyone had that problem and knows what to do?
    It really bugs me as I cannot connect my iPhone anymore.
    Thanks!

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Installation error when installing CS6 on Mac?

    I keep getting an installation error when I try to install CS6 on my Macbook Pro. It says "installer failed to initialize, this could be due to a missing file". It also shows troubleshooting tips. I have tried them and none of them work. I also tried disc repair and multiple other troubleshooting advice from this site. Nothing has worked yet. Help!

    does your macbook meet the system requirements:
    Mac OS
    Multicore Intel processor with 64-bit support.
    Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems. Refer to the CS6 FAQ for more information about Mac OS X Mountain Lion support.**
    4GB of RAM (8GB recommended)
    15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
    1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required and second professionally calibrated viewing display recommended for Adobe SpeedGrade
    OpenGL 2.0–capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    Java Runtime Environment 1.6
    Eclipse 3.7 Cocoa version (for plug-in installation of Adobe Flash Builder; the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
    QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
    Dedicated GPU card recommended (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
    Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
    Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
    This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
    if so, attach a screenshot of the error.

  • Forms Runtime crashes when installing on clients (W95)

    I'm trying to test my application which has been created with Developer 2000. Forms only, no reports or anything else yet.
    It is my understanding that all I have to do is install the FORMS RUNTIME item from the developer CD. If this is wrong, please correct me. My problem is when it gets a small portion of the way through the install, it crashes - why and how do I fix this? My error is a GPF, 'Orainst caused an invalid page fault in module kernel32.dll'. This happens on every machine so far, all Windows 95B.
    Any advice is appreciated.

    I finally callled Oracle Tech Support and figured out my problem. Thought I'd post it in case anyone else has this trouble. I had the Ora8i client installed because my app was originally VB & used ODBC drivers etc.
    I uninstalled every Oracle component on my machine.
    Physically deleted the Oracle folders from C: and from C:\Program Files
    In Regedit I physically deleted the two Oracle keys under HKEY_LOCAL_MACHINE/SOFTWARE and HKEY_LOCAL_USER/SOFTWARE.
    Reinstalled the forms runtime files using the default Oracle Home (which it requires). Then installed Net80 components to enable communication with my database.
    So far so good.
    null

  • System crashes when installing games via DVD Writer

    When installing multi-disk games / programs pc freezes after putting in second disk - I have tried various other optical drives (IBM 8x CDROM - Pioneer 107 and of course NEC3500) but I have no joy - system just hangs and requires a power off/on to restart.
    Tried SATA hard drive but still same problem - tried different cpu 2.8 Northwood - but still no joy.
    It does not crash all the time and the games that are on it work fine for any length of time - I have PC alert installed and CPU and system temperature dont go above 51 C
    I have installed the games on another pc and they work fine so its not the disks.
    please help

    Hmm, I hope you fixed your problem regarding installation..and maybe the freezing now is a totally seperate problem?  Honestly, at this point...I would reformat everything, even update the BIOS if you haven't done so already.  This time though, I wouldn't install anything except the bare essentials (WinXP w/o SP2...vid and sound drivers....no MSI extras)  Then install a game or two and test out your crashing then.
    I know it's a pain to reformat...but when things get rough, you reformat!  
    Good luck!
    Truong

  • My brand new Mac Pro running Mountain Lion crashes when installing updates or new software.

    My brand new Mac Pro running Mountain Lion crashes and re-boots when installing updates or new software. I can only perform these operations while in the safe boot mode.  I have reloaded OSX twice. Does not solve the problem.  The machine is brand new. It replaced a previous MacPro that would not support the new Mountain Lion.  When my new machine came in.  I swaped the dirve out of my old unit into the new and ran the new Lion update.  The machine has had this aforementioned problem since that time.  Also, I had the Legacy version of File Vault running on the old machine/drive, which I also turned off(thinking that was the problem)  but that did not fix the problem either.

    Here is my panic log entry:
    Sun Nov 18 22:08:42 2012
    panic(cpu 6 caller 0xffffff800b4ac90b): Releasing non-exclusive RW lock without a reader refcount!
    Backtrace (CPU 6), Frame : Return Address
    0xffffff8556cab950 : 0xffffff800b41d626
    0xffffff8556cab9c0 : 0xffffff800b4ac90b
    0xffffff8556cab9e0 : 0xffffff800b51c09c
    0xffffff8556cabc10 : 0xffffff800b510e92
    0xffffff8556cabc40 : 0xffffff800b4ff375
    0xffffff8556cabf50 : 0xffffff800b7e182a
    0xffffff8556cabfb0 : 0xffffff800b4ced33
    BSD process name corresponding to current thread: installd
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000000b200000
    Kernel text base: 0xffffff800b400000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 427147359117
    last loaded kext at 111975561856: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f8ba85000, size 229376)
    last unloaded kext at 127467947009: com.apple.driver.AppleIntel8254XEthernet          3.1.1b1 (addr 0xffffff7f8bf8d000, size 69632)
    loaded kexts:
    com.zeobit.kext.Firewall          2.3.1
    com.apple.filesystems.smbfs          1.8
    com.apple.driver.AppleIntelProfile          97
    com.apple.driver.AppleBluetoothMultitouch          75.15
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.kext.AMDFramebuffer          8.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.driver.AppleHDA          2.3.1f2
    com.apple.AMDRadeonAccelerator          1.0.0
    com.apple.driver.AppleMikeyDriver          2.3.1f2
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.11
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.2
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.driver.AppleUSBHub          5.2.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AirPort.Brcm4331          602.15.22
    com.apple.driver.Intel82574L          2.3.0b4
    com.apple.BootCache          34
    com.apple.driver.AppleAHCIPort          2.4.1
    com.apple.driver.AppleUSBEHCI          5.4.0
    com.apple.driver.AppleUSBUHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.AppleProfileTimestampAction          97
    com.apple.driver.AppleProfileThreadInfoAction          97
    com.apple.driver.AppleProfileRegisterStateAction          97
    com.apple.driver.AppleProfileReadCounterAction          97
    com.apple.driver.AppleProfileKEventAction          97
    com.apple.driver.AppleProfileCallstackAction          97
    com.apple.iokit.AppleProfileFamily          97
    com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
    com.apple.driver.AppleMultitouchDriver          235.28
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.AppleUSBAudio          2.9.0f6
    com.apple.driver.DspFuncLib          2.3.1f2
    com.apple.iokit.IOAudioFamily          1.8.9fc10
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOAcceleratorFamily          19.0.26
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.iokit.IOBluetoothFamily          4.0.9f33
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.kext.AMD5000Controller          8.0.0
    com.apple.kext.AMDSupport          8.0.0
    com.apple.driver.AppleGraphicsControl          3.2.11
    com.apple.iokit.IONDRVSupport          2.3.5
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleHDAController          2.3.1f2
    com.apple.iokit.IOGraphicsFamily          2.3.5
    com.apple.iokit.IOHDAFamily          2.3.1f2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleUSBHIDKeyboard          165.5
    com.apple.driver.AppleHIDKeyboard          165.5
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.2.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IOUSBUserClient          5.2.5
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.1
    com.apple.iokit.IOUSBFamily          5.4.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7.2
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0

  • Computer Crashes When Installing Photo Gallery

    Why would my Toshiba Satellite L505D crash when trying to install Windows Live Photo Gallery? This is WIN7 64 Bit; crashes when trying to install Windows Live Essentials any version.

    Which Satellite L505D? See the label on the bottom.
    What do you mean by "crash"? Attach a picture of any message.
    Give us the download link for the program you're installing.
    -Jerry

  • Dead iPad 1 crashed when installing iOS 5.1

    Hi
    My iPad 1 64 /3G which has all the regular crashing abilities discussed on this forum has finally died
    It crashed whilst installing iOS 5.1
    It will not restart , the battery is showing critical low level despite 24hrs of charging
    Can any body help ?  I have tried holding both buttons several times, it starts then shuts down after showing the low battery symbol, despite being on its proper power mains supply
    Does not respond at all when connected to iTunes.

    I had the same problem and was ready to throw It in the trash. Last night I erased my iPad and set it up as new iPad instead of restoring. I didn't turn on iCloud until after I deleted my iCloud backup and turned off contact syncing with it. Since then it hasn't crashed and it has had about 4 hours of use. 5.0.1 didn't have an effect on it. Just happy I got my iPad back!

  • Crash when installing AIR on Mac

    Here is my log for trying tio install Air.
    I have tried most everything that I have read and can not get this program to load.
    Jan 26 08:36:49 Pro-Eggz airportd[852]: _doAutoJoin: Already associated to “linksys”. Bailing on auto-join.
    Jan 26 09:34:49 Pro-Eggz mds[39]: (Error) Backup: Couldn't stat source path '/Users/DanEggert/Downloads/AdobeAIR.dmg' -- importing from backup path instead
    Jan 26 09:35:30 Pro-Eggz mds[39]: (Error) Backup: Couldn't stat source path '/Users/DanEggert/.Trash/AdobeAIR.dmg' -- importing from backup path instead
    Jan 26 09:48:49 Pro-Eggz Adobe AIR Installer[1082]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.7.2 x86
    Jan 26 09:48:49 Pro-Eggz Adobe AIR Installer[1082]: Commandline is: -psn_0_651423
    Jan 26 09:48:49 Pro-Eggz Adobe AIR Installer[1082]: No installed runtime detected
    Jan 26 09:48:51 Pro-Eggz com.apple.launchd.peruser.501[162] ([0x0-0x9f09f].com.adobe.air.Installer[1082]): Job appears to have crashed: Segmentation fault: 11
    Jan 26 09:48:52 Pro-Eggz ReportCrash[1083]: Saved crash report for Adobe AIR Installer[1082] version 3.1 (3.1.0.4880) to /Users/DanEggert/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-01-26-094852_Pro-Eggz.crash
    What do I do next?

    Hi,
    Please see this post for workarounds:
    Attention Mac 10.7.2 users that are crashing with Adobe AIR
    Thanks,
    Chris

Maybe you are looking for

  • Date field is missing in the Table maintainance generator

    Hi,   A table is created. A date field is there in that table. I tried to create a table maintainance generator for this table using 2 screens. Table maintainance generator is  created. But when I go to SM30 , I am unable to see this <b>DATE</b> fiel

  • Oracle RAC Installation: Unix nodes, Windows ASM

    I have a question about configuring Oracle RAC. I have never done any RAC or ASM installation before. Might be a stupid question for some of you. Is it possible to install Oracle RAC using following options? 2 node RAC using Sun Solaris Shared Storag

  • Hide and show text field

    Hi I have created text field as hire date: which is database column. I would like to show the hiredate if the empno exists in database otherwise do not show. How can i show the hiredate only when the empno is exists in the database. Please help to fi

  • Bad_pool_header in windows 8

    Hi, I encountered the problem recently. Here''s my dump files. could anyone run a diagnose and tell me which program caused this problem? many thanks. http://1drv.ms/1guhuz1

  • E72 WPA PSK handshake problem

    Hi, my company has bought a couple of E72's. I'm trying desperatly to get them to connect to our WLAN network, which is encrypted using WPA/WPA2 with a PSK. Every other device will just work fine, but the E72 is timing out while connecting giving an