[JS CS3 Server Win] Path to IP address

Hello,
If I map a drive letter (H) to an IP address on the server running InDesign server the following works...
var myOutputFolder = "H:/Output/"
How do I refer to this same destination using its IP address?
H: is a mapped to \\10.19.251.214\Server
I have tried to refer to this folder as...
var myOutputFolder = "//10.19.251.214/Server/Output"
But get errors. What is the correct way to refer to a folder using an IP address?
Thanks
Simon Kemp

HI,
By the way the official way is browse, ... for example excel path. I have tried with my computers c$ share.(
127.0.0.1\c$)
1. Open file browser of your machine
2. go to network places, and turn of left panel
3. Add a new network place and enter the ip address based share
127.0.0.1\c$
4. Save this new network place
5. open >Administration->System Initiation>General settings>Paths in B1 and select the address from network places you have saved.
My XP has been automatically converted the shortcut of the network place into ip address based share.
but fast solution only for test....
select excelpath from oadm
--update oadm set excelpath = '\\192.168.1.1\c$'
Use the system information to detect the field names in OADM and OADP table.
Regards,
J.
Ps: do not forget points for the solution

Similar Messages

9i and 10g on same server (Win 2000) - only use one a time.

I am working on setting up an oracle server for testing purposes and wonder if it is possible to install 9i and 10g on the same server (Win 2000) without any conflicts? Only one would be used at a time.
Thanks,
Luke

Yes. It is possible to have multiple version in windows. However, it is little tricky compare to unix environment.
You can comfortably execute respective versions(9i and 10g) GUI interfaces. But you may have issue when you try to execute binaries from command prompt. Each Oracle installation will keep appending the environment variables(path, etc). You can have batch file for each version and execute it.
GUI interfaces controled by windows registry. Each version will have separte registry entry with necessary variables.
Ashok

Application server file path vaidation

I have written the code for application server file path validation.
DATA : l_fname TYPE filename-fileintern." type c.
DATA : l_filpath TYPE filename-fileintern,
 l_filname(40) TYPE c.
PARAMETER : p_sucfil LIKE rfpdo-rfbifile OBLIGATORY. " rlgrap-filename
AT SELECTION-SCREEN ON p_sucfil.
l_fname = p_sucfil.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
 logical_filename = l_fname
 OPERATING_SYSTEM = SY-OPSYS
PARAMETER_1 = ' '
PARAMETER_2 = ' '
PARAMETER_3 = ' '
USE_PRESENTATION_SERVER = ' '
 WITH_FILE_EXTENSION = 'X'
USE_BUFFER = ' '
ELEMINATE_BLANKS = 'X'
IMPORTING
EMERGENCY_FLAG =
FILE_FORMAT =
 FILE_NAME = l_filpath
EXCEPTIONS
 FILE_NOT_FOUND = 1
 OTHERS = 2
IF sy-subrc <> 0.
message 'Invalid file name' type 'E'.
ENDIF.
But always i will get Invalid file name.
Y is it so.
pls help me.

Praveen,
I have checked ur code and I found that if i give a logical file name from
tran. FILE under folder 'Logical file name definition, cross client' then ur code works. Pl. check.
Regards,
Joy.
DATA : l_fname TYPE filename-fileintern." type c.
DATA : l_filpath TYPE filename-fileintern,
l_filname(40) TYPE c.
PARAMETER : p_sucfil LIKE rfpdo-rfbifile OBLIGATORY. " rlgrap-filename
AT SELECTION-SCREEN ON p_sucfil.
l_fname = p_sucfil.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = l_fname
operating_system = sy-opsys
with_file_extension = 'X'
IMPORTING
file_name = l_filpath
EXCEPTIONS
file_not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
 MESSAGE 'Invalid file name' TYPE 'E'.
ENDIF.

Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software Engineer

Hello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve.

Does lion server support a single email address across multiple devices??

I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very small business with a number of email accounts for a couple employees and need access to email and calendar from both the office iMac's and my Macbook Pro when on the road. My IT guy says I need Exchange but he's been off base on a few other items recently and I wanted to check with other sources.
I have 2 new iMac's, a MacBook Pro, an iPad1 and and iPhone4 on the mac side of things and 2 windows computers running XP. I would get rid of the windows computers completely if not for my CAD program which runs best not in a virtual machine mode.
How well will email and calendar entries sync across devices?

I have a very similar setup at my office. Lion Server will push email, calandar, contacts to all of your apple product with out a hitch.
As far the Windows XP machines, you can access email over IMAP with Thunderbird, and calandars via sunbird or the built in web app.
I would ditch the exchange server move to Mac OS X Server, and never look back.
God Luck!
PS. All of your devices will be in sync all the time.
Shore answer:
Does lion server support a single email address across multiple devices??
Yes.

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
package.
Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

Hi Rossco150,
I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
\\ServerName\Temp --- Read
\\ServerName\Temp\Source --- No access
\\ServerName\Temp\Source\Flat Files --- Full control
I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Mac mini server refuses to get DHCP address from router

Everything was going along fine. But after a power outage the server goes to a 169. address when the router puts out 198. addresses. If I put a static 198. address in it sees the network but won't connect to the internet. I've flashed the router (everything else sees the router fine, 3 computers and a time capsule). I've had the hardware checked at the Apple store - it picked up an address right away. After narrowing everything down the problem has to be in the operating system. I even did a full time machine restore to the day before the storm. No luck. Anyone heard of this problem.

Mauricette has a point.
A server function is not designed to accept a floating or dynamic IP address. If that is the case, how do you create firewall rules that prevent those unnnecessary ports being left opened from being attacked by rogue machines in Romania and China on a hourly basis when you announce to the world that your server is available if the server IP address keep changing due to the DHCP lease change? Yes, they do have bots that do this VERY EFFICIENTLY!
By changing the very nature of your firewall rules by working with DHCP, you are opening ports you do not know to accommodate DHCP dynamic addressing, which was the reason why your Mac Mini Server stopped working in the first place. It's ok for a client, since a client isn't serving any files to any one right.
By using client based firewall rules, you are exposing your server to attacks and when they get through your Mini server, which they can if they are persistent, they get into your home network and then whatever file server services you have opened and unprotected at the time WILL BE copied by these people easily.
I have a client once who did just that. She was attacked, the hacker went through her network like a rampaging bull. They were from China. My Synology RAID server gets this attack all the time, but I have a well establish IDS system and the Synology RAID has logs that tracks attacks.
For a server setup. Use static IP and then build a strong firewall around it and protect it and never compromise.
Recently, I just noticed someone somehow hacked and broke my WPA-PSK AES passkey for one of my Wireless N network router. It was not set up with a strong password though, but thankgod I had a firewall around that so my internal networks were safe. So this teaches you that if someone wants in bad, they will get in.
Hope this helps.

How to give the application server file path in the module pool programming

Hi,
     Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.
For eg I have imported a logo name owens into sap system by using transaction se78; now I need to call the path in the below url,
if container2 is initial.
CREATE OBJECT CONTAINER2
EXPORTING
    CONTAINER_NAME              = 'PICTURE_CONTAINER2'.
CREATE OBJECT PICTURE2
EXPORTING
    PARENT = CONTAINER2.
CALL METHOD PICTURE2->SET_DISPLAY_MODE
EXPORTING
    DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS
    ERROR        = 1.
CALL METHOD PICTURE2->LOAD_PICTURE_FROM_URL
EXPORTING
    URL    = " ? "
EXCEPTIONS
    ERROR = 1
    Others = 2.
endif.
Thanks in advance
Deepu

hi Deepu,
Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
Regards,
Santosh

Regarding Application server file path browsing

Hi All,
I have a issue regarding Application Server File Path browsing.
Actually in my selection-screen i will declare a parameter as Application Server File Path now when i press F4 in that field it should be able to browse through Application Server Path's.
Just like F4_FILENAME in the case of Presentation Server File Path Browsing.
Can anybody solve my issue.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi Shaik,
Just copy and paste:
Here is the code for retrieving list of files contained within specific Application server directory(SAP).
PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
include structure salfldir.
data: end of it_filedir.
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_fdir
tables
file_tbl = it_filedir.
List of files are contained within table it_filedir
loop at it_filedir.
write: / it_filedir-NAME.
endloop.
Hope this will help you.
Let me know incase of any concerns.
EDIT:
There are few FM for ur refernce :
RZL_READ_DIR_LOCAL
SUBST_GET_FILE_LIST Return table with file list for the given directory (pattern allowed)
F4_DXFILENAME_TOPRECURSION Popup to select one file from the given application server directory
TH_SERVER_LIST Returns list of application servers.
EPS_GET_DIRECTORY_LISTING Lists filenames from the application server .
Cheers
Sunny
Rewrd points, if found helpful
Message was edited by: Sunny

Opening CS2 document in CS3 Server not working,

Hi
I'm trying to open an InDesign CS2 document in CS3 Server, but when I do that, the Application.open() doesn't return.
InDesignServer.exe starts working for a while, creates a lock file, but then it starts to idle and the call won't return.
After this, I cant do anything against the server anymore, until i restart it.
Is this a known issue? is there a solution for this?
I'm using the Java/CORBA interface.
Thanks
/Niklas

I got it working after uninstalling and installing again, and updating, but now i have another problem.
06/05/08 14:50:55 WARN [server] "Untitled" may be damaged. Do you want to open it anyway?
Script request "open 'odoc' kOpenEventScriptElement[AppFramework + 88 (0x16158)]" returning generic error kFailure. Eng: Please replace with a more specific error code. QE: Please report this assert as a 2/2 bug with keyword 'Better Scripting Error.'
I think it's saying cancel for me, is there a way to change this and make it say OK?
/Niklas

InDesign CS3 Server - Support for Standard ECMA-357, ECMAScript for XML (E4X) Specification

Does InDesign CS3 Server fully support the XML standards outlined by ECMA in 'Standard ECMA-357 ECMAScript for XML (E4X) Specification'?
http://www.ecma-international.org/publications/standards/Ecma-357.htm

Thanks Michael, for your prompt reply.
I can see that some of the XML library/functions are available in the ExtendScript Editor - but I just wanted to make sure that I'm not missing something.
Thanks again,
Carl

InDesign CS3 Server - Enterprise Solution Options

Does InDesign CS3 Server offer an option to run several, separate instances on multiple, dedicated servers - each configured with an unique IP & port number?
Basically - has InDesign CS3 Server built-in capabilities (mode/configuration options) to distribute and handle server requests to multiple server nodes (external, physical boxes)?

There is currently no built-in support for distributing server requests across multiple server nodes.

Running CS3 on Win XP suddenly lost Exposure function in Image adjust. Ant ideas?

Have CS3 in Win XP been fine for about a year but now dont get the exposure function in Image>adjust it was there 2 days ago and no crashes have occurred. Any ideas how to restore?

Hi Bob,
First time user SORRY question is now fixwd by myself but couldn't find how
to erase question in forum
Regards,
Jim Christie

Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?

HI all,
Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
Thanks in Advance
Sapsanthose

sapsanthose wrote:
HI all,
>
>
>
> Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
>
>
> Thanks in Advance
>
> Sapsanthose
Hi,
Yes, it does. Check the service.sap.com/pam
Best regards,
Orkun Gedik

[JS CS3 Server Win] Path to IP address

Similar Messages

Maybe you are looking for