Just updated app and sent to Apple in advance of iOS8...got this error message...during binary upload...
Is this an issue? If so what should I do to avoid Apple kick back?
Invalid or Non-Increasing CFBundleVersion - The value specified in the bundle's Info.plist file for the key CFBundleVersion must be a string consisting of any number of dot-separated components, where each component is composed only of the digits 0 through 9. For example, any of the following are syntactically valid values for CFBundleVersion: "1.0", "4.2.1", "5545.12", "1.4.0.0.5"; whereas the following are all syntactically invalid: "GX5", "3.4.2b6", "2.6GM", "1.0 (Gold)", "-3.6". Additionally, each updated version of the same application must have a CFBundleVersion that increases relative to that of the previous version that was actually made available for sale on the iTunes Store. For example, if a previously-available version had a CFBundleVersion of "1.4", then any of the following would be acceptable as the next update: "1.4.0.0.0.0.5", "1.4.1", "1.4.332", "1.5"; but all of the following (though syntactically valid) would be unacceptable: "1.4", "1.3", "1.3.99999", "0.9". For more information about the CFBundleVersion key and the Info.plist file, see Apple's Runtime Configuration Guidelines athttp://developer.apple.com/library/ios/documentation/MacOSX/Conceptual/BPRuntimeConfig/ind ex.html
After you’ve corrected the issues, you can use Xcode or Application Loader to upload a new binary to iTunes Connect.
We received a similar warning:
"ITMS-9000: This bundle is invalid. The value for key CFBundleVersion in the info.plist file must be a period-separated list of at most three non-negative integers. Version Mismatch. Neither CFBundleVersion nor CFBundleShortVersionString in the Info.plist match the version of the app set in iTunes Connect."
Should we also ignore this warning?
Similar Messages
-
I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you -
I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file
For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).
-
By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.
Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE. -
I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""
Hi islandschool,
Please try the suggestion given in the link:- http://helpx.adobe.com/creative-suite/kb/unable-validate-serial-number-ccm.html
Regards,
Sarika -
I need help. When I restored my hard drive and tried to open dreamweaver it gave me this error message 150:30. It's telling me that the licensing for this product has stopped working. Can you explain
Use the CS Cleaner Tools and Re-install your software.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O. -
I just downloaded the latest version of iTunes to my laptop and after I booted up iTunes I got this message:
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh... -
I have purchased an item from within the app PocketBible on my iPad. However when I try to download it I am asked for my app User Name and Password and then my Apple ID and password. I give both of these. I then get a message which says Regrant failure - Please log in with the same user that has bought the app. That is then followed by Pocket Bible Alert - cannot connect to iTunes Store.
Anybody got any ideas, both what the 1st alert means and how I get round the problem please.I had the same problem. My wife had the PocketBible on her Ipad 2 and she transferred ownership to me. I had to delete the app and reinstall it from the App store(logged in with my apple ID) and its working without a problem. I do not get those error messages when I attempt to Buy/Upgrade or Add/Remove books.
-
This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.
Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error? If not do you have any questions regarding the steps listed with the document?
-
Hi,
I found different answers what to do, but nothing helped me.
I moved plug ins into different folders, opened up all security for illustrator read/write, reinstalled illustrator,
And found the same error message to somebody's problem, but no answer that helped. I found this guy with the same problem has the same user ID like myself. Normal?
0000000100000000-00000001014ca000 [ 20.8M] r-x/rwx SM=COW /Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Thanks
DanielNobody who has the same problem or who can help me?
Keiner, der die gleichen Probleme hat und mir helfen kann? -
I had Lion 10.7.3 with spctl enabled, few days ago i had thru Software Updates > Upgrade to 10.7.4; i upgraded but this time when im trying to install an program i have the message that producer is not signed or software was from AppleStore so i tried to disable on Terminal, but i got this message:
'error: invalid API object reference'
i guess now i cant install anything because either i want to enable or disable the result is the same.I have this same trouble with an IMac, was also 10.7.3 with spctl enabled, and after upgraded to 10.7.4, i cant install anything.
-
Help. I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
I have not made any changes to my machine. Help - I can't get to my imagesTry restarting your system.
If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting. -
After backing up, iTune was restoring and it showed the error message "An error occurred while restoring this iPhone (-50)".
I have two iPhones; iPhone 4 and iPhone 3GS.
I successfully upgraded my iPhone4 to iOS 5 with iTune on my Window XP. Everything works well.
So, I tried to upgrade my iPhone 3GS as well (with the same iTune on the same computer). After backing up,
iTune was restoring and it showed the error message "An error occurred while restoring this iPhone (-50)".
I tried to unplug and plug the iPhone. but iTune showed the same error when I click "contrinue restore" button.
I think backup file would still exist on my computer and I want to restore them all.
Please help me to fix the problem.
Thanks,Hi...
Click here > iTunes: Advanced iTunes Store troubleshooting
Then click: Specific Conditions and Alert Messagers
Then click: Error 50 ... -
If I try to repurchase the audio book, it tells me that I have already purchased it and asks if I want to pay again? How can I get this book back?
Audiobooks are currently a one-time only download from the store, so you will need to try contacting iTunes support and see if they grant you a re-download : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
An iPad is designed to only be synced to one computer at a time, if you want to change the computer that it is synced to then this page might help : https://discussions.apple.com/docs/DOC-3141
Maybe you are looking for
-
I can't find Photo Booth, it is off the dock, can't find in in applications, it is nowhere to be found. Please tell me where else I can look or how to reinstall it. My family and I miss it. Thank you.
-
I knew there was something wrong and i found it now i need to fix it. What it is, is when after my preloader finishes loading large images and the messageboard, i get the images no problem (shgows the preloader works) but the messageboraddoes not wor
-
Hi! Is there any 3rd party components (grid,scrollbar,button,toolbar...) for Forms6i/9i? Thank You
-
Error Message in Buiding Slideshow Encore CS3
PGC "my project" has an error at 00:06:20:04. internal software error: %0, line project name-PGC info: name=Project Name, =Bpgc, time=00:06:20:04
-
Error 36 - When Importing photo's from a CF card
Help...I am trying to import photo's from a CF card to my G5 & my Macbook pro. I can import from a memory stick with no probs to either machine. I can see the thumbnail in preview but thats it, giving ERROR 36.. Has 10.4.7 something to do with this ?