JVM 102 error @ BB 8530

I tried fixing it using the method in the internet; however, the computer won't recognize my BB. Is it time to change my phone? or there is still hope.

when you plug it into your PC and open desktop manager, it should say can not recognize you BB, at the bottm of that message, its should say update, click and re-load the software
Craig Ashcroft Elite UK
If this post helps you please click the LIKE below the post(s)

Similar Messages

Blackberry Electron 8800 JVM 102 Error Blackberry Desktop manager help

My blackberry got the JVm 102 error and i found out how to fix it using Blackberry Desktop manager, but i do not know which verson of blackberry Desktop manager i need, can any one help. thanks in advance -mike

Yes. Before you connect your device
go to options > advanced options > service books > scroll to Desktop (SYNC) and hit menu > delete
Run your sync on your PC, then go back to service books, hit menu > undelete. You will be good to go.
If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

URGENTLY NEED HELP!!! phone has blackberry 102 error

Hi
I upgraded my whatsapp and they asked me to restart the phone when i did that a white screen appeared saying
"Error 102 reload software for further information please visit www.blackberry.com/102"
i tried to go to that link but it doesnt exist, i read on the forums someone else had the same issue and the instructions were to connect the blackberry t your laptop but my blackberry wont read on my laptop with the cable, with or without the battery in it wont let me go into the phone
Please help! my whole life is on that phone and my world is at a standstill without it!!!

Please make sure the Cable you are using is a Datasync Cable and not just a Charging Cable to be able to connect your phone to your computer/laptop. Replacing a USB Cable? Ensure it’s a Datasync Cable
Try this workaround:
For BlackBerry Device Software 7.0 and earlier, please either perform a hard reset by removing the battery from the BlackBerry smartphone and reinserting it or perform a reload the BlackBerry Device Software. For more information on how to hard reset the BlackBerry smartphone, see KB02141. For more information on reloading the BlackBerry Device Software, see KB10144.
For BlackBerry Device Software 7.1, if unable to contact the wireless service provider through which the BlackBerry smartphone was purchased or BlackBerry Technical Support Services for further review and support, please ensure the BlackBerry smartphone is running the most current version of BlackBerry Device Software. For more information on updating the BlackBerry Device Software, see KB16068. If unable to contact the wireless service provider through which the BlackBerry smartphone was purchased or BlackBerry Technical Support Services for further review, and the BlackBerry smartphone is running the most current version of BlackBerry Device Software, please either perform a hard reset by removing the battery from the BlackBerry smartphone and reinserting it or perform a reload the BlackBerry Device Software. For more information on how to hard reset the BlackBerry smartphone, see KB02141. For more information on reloading the BlackBerry Device Software, see KB10144.
"JVM 102" error is generated on the BlackBerry smartphone
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

102 error when updating iPhoto 9.4.3

Hi
I keep getting a 102 error when trying to update to iPhoto to 9.4.3.
Originally I was updating the OS to 10.8.5 in App store by using the top level Update button (the button which allows to you run all current Apple updates with one click). This returned a 102 error. Then I tried installing all of the pieces of software individually, including 10.8.5, iTunes, Remote Desktop, Thunderbolt Firmware, etc., which worked fine until I got to the last one, iPhoto 9.4.3.
I have tried everything: booting into safe mode, zapping the PRAM (not sure why this would help but I'm throwing everything at this!) verifying the disk and repairing permissions, I've even tried calling on the Gods of Mac to favour me in return for the scrapping Word for Pages!
I've read a load of similar posts, some of which suggested overloaded Apple servers and others with no resolutions.
My current version of iPhoto won't run (9.2.3) but I desperately need to retrieve some client photos.
Any thoughts extremely welcome.
Regards
Andrew

Link to update.
iPhoto 9.4.3

JVM Loader Error: Unable to find supported JDK or JRE version

Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
Manju

Hi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.

ALC-LCM-140-102 Error while installation

While installing LiveCycle ES, I'm getting the 'ALC-LCM-140-102' error with the following error message-
Failed on 'Starting target server'
Failed to start server LCServer1
Please let me know if we have missed any configuration settings to resolve this issue.
Thanks in advance.

Make sure you create JMX policies first : Adobe LiveCycle ES4 * 3.6 Creating JMX policies for database initialization
-Wasil

HT5568 Havent been able to download this update. Throws an "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" error. What can I do?

When I try to download this Safari 6.0.2 update through the app store, it just throws the “The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)“ error. What can I do?

“Not Found
The requested URL /content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg was not found on this server.“

JVM init error with Illustrator

Hi,
always when i try to export the JavaFXInvaders.ai Demo File I get a JVM init Error or my Illustrator crashes. Anyone an idea?
Greetings Riepi

here is the end:
<-WriteTree(0)
finding Creating jvm
Jar path: -Djava.class.path=C:\Programme\Adobe\Adobe Illustrator CS3\Zusatzmodule\Illustrator-Formate\AI2JavaFX.jar
jni: Error occurred during initialization of VM
jni: Could not reserve enough space for object heapjni:
Function JNI_CreatedJavaVM failed:
JVM Init error
destruction of used names started ...destruction of used names completed.

I have jvm 513 Error

I have a jvm 513 error - I have downloaded the Desktop Software on my computer, but the Desktop Manager is not allowing me to find the Application loader exe. program. Please tell me how to get my 8310 Curve working again. I need my phone, and I am trying not to just hit t with a hammer.
Please help!!!!
Ladylaresa67

Her are 2 discussions of users that had the same issue and were resolved... check them out and read the whole thing, there are several steps throughout the whole read.
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=15454&query.id=288875...
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=39721&query.id=288875...

Update MacBook Pro result is a (NSURLErrorDomain error -3001.)(102) error

Update via Mac AppStore on my MacBook Pro results in a (NSURLErrorDomain error -3001.)(102) error, is there any solution??

To download and install the Safari update > http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg To download iPhoto and Aperture updates > http://support.apple.com/downloads

JVM Launcher error message

I have written a java program that when opened with Jav 1.3 I get a JVM Launcher error. Is it possible to catch this error in my code and put a different error message in a JOption pane?

Probably not, since until the JVM is started, your application doesn't exist. Even if your app starts up, it will start AFTER the JVM error message is written out (probably).

8120 with 507 and 102 Error

Hi, I wonder if somebody could help. I have a Blackberry 8120 on Orange UK. A few days ago when i switched it on it come up with a 507 error. I did some searching on the boards and i though it just needed the OS system reloading. I have tried to do this numerous times, deleting the Vendor file and running it in no java app loader, with and without the battery. But unfortunately it always get to the Loading applications stage and then the phone restarts itself, this has happened at various different stages during the installing. The phone then powers on showing JVM error 102. Can anybody please help ?

Hi and Welcome to the Forums!
You probably need to do a clean wipe and then reload of your BB. See this information about using JL_CMDER for that process:
http://forums.crackberry.com/f3/how-wipe-jl_cmder-53502/
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

No jvm found error

i have installed j2sdk.. its working properly.
Then while installing apache tomcat it asks the jvm path.
I specified the jre folder in j2sdk. but it gives the error "No JVM found".
so what to do??

try to add JAVA_HOME environment variable with value = path to the jdk

Error while installing JRE 6 update 6: jvm.dll error

Hello, I am just a normal user of Java, I am no programmer but knew of nowhere else to post this. While installing the latest Java at the period where it says "Registering Java Runtime Environment" an error pops up saying "Error: no 'client' JVM at C:\Program Files\Java\jre 1.6_._._\bin\client\jvm.dll". This error appears everytime I try to install Java. I have tried deleting the deployment.properties file, disabling any malware/virus blockers, I have made sure each install is a clean one, and while watching the ...\bin\client folder, I see that near the beginning of the install it makes a jvm.dll, but when it gets to the "applying patches" part of the install it changes the jvm.dll to a RT~~~ temporary file, but by the time it reaches the end of the install it never changes it back to jvm.dll. I have tried manually renaming it, and putting a working jvm.dll in the folder from another computer; all to no avail. I have also tried installing older versions of Java. I don't know what else to do. I am running Windows Vista SP1, and Java used to work, but I tried to update from 1.6 update 5 to 1.6 update 6, and the problems began. Any and all help would be greatly appreciated.

welcome to SDN, could you please paste the detailed installation log? we cant help you until you provide detailed log.
cheers,
-Sunil

Oracle Forms 11.1.2.0 on Win 7 64-bit JVM bits error

Trying to install Oracle Forms 11.1.2.0 on Win 7 64-bit and keep getting INST-07407: Unable to detect machine platform or JVM Bits.
I read somewhere where having spaces in the JDK install path causes problems so I changed the path to c:\oracle\java instead of C:\Program Files\java\jdk1.6.0_24. I do have a 64-bit JDK installed. What else could be causing this error message? Opening an Oracle service request has been zero help - hoping for help here. I have set JAVA_HOME and added the java home to the end of PATH. I can start and stop the weblogic server at middleware home C:\Oracle\middleware_oraforms.
c:\Oracle\Java\bin>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
c:\Oracle\Java\bin>echo %JAVA_HOME%
C:\Oracle\java
c:\Oracle\Java\bin>echo %PATH%
C:\Oracle\Ora10\bin;C:\product\11.2.0\dbhome\bin;C:\Oracle\ORA11\11.2.0\bin;C:\P
rogram Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\
windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\Windows
PowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\
Program Files (x86)\WinMerge;C:\Program Files (x86)\Rational\common;C:\Program F
iles (x86)\Hummingbird\Connectivity\11.00\Accessories\;;C:\Program Files (x86)\R
ational\ClearCase\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn
\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn
\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files (x86)\M
icrosoft SQL Server\100\DTS\Binn\;*C:\Oracle\java*
product.properties
DOCSWEBROOT=http\\://download.oracle.com/docs/cd/E17904_01/web.1111
ProgramGroupName=BEA WebLogic Platform 10.3 (Integrated Build)
PLATFORMHOME=C:\\Oracle\\MIDDLE~1\\wlserver
WLS_INSTALL_DIR=C:\\Oracle\\MIDDLE~1\\wlserver
USER_INSTALL_DIR=C:\\Oracle\\MIDDLE~1\\wlserver
CONFIGWIZ_HOME=C:\\Oracle\\MIDDLE~1\\wlserver
BEAHOME=C:\\Oracle\\MIDDLE~1
MW_HOME=C:\\Oracle\\MIDDLE~1
WL_HOME=C:\\Oracle\\MIDDLE~1\\wlserver

First, there is no need to relocate the system jdk. Part of your problem is more likely the result of a known limitation which is caused by the System PATH and/or CLASSPATH containing special characters like the parenthesis in (x86). So, do the following:
Before you start, be sure that your machine has a static IP address. If it does not, you will need to install the Windows loopback adapter. Read the Installation Guide and System Requirements for more details.
1. Clean up from your failed installation attempts. Be sure to also remove the C:\bea folder assuming no other product is using WLS.
2. Uninstall the 64bit jdk then reinstall it where you prefer it. I would recommend its default location.
3. Open a Notepad session and leave it open as a holding place to paste the following information.
4. Open the System properties. Computer > right mouse click > Properties > Advanced System Properties > Environment Variables
5. Locate PATH in the system variables and cut all of the values to the clipboard and paste them in the Notepad session you just opened above. Save this information for later.
6. In the PATH value, set it to the following, be sure that the path to the jdk is correct for your installation:
<blockquote>%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%;C:\Program Files\Java\jdk1.6.0_37\bin</blockquote>
7. You will need the "generic" WLS download if you plan to run 64bit. This will be a jar file rather than an exe. Assuming you are using WLS 10.3.6, open a DOS window and start the installer as follows:
<blockquote>java -jar C:\PathToJar\wls1036_generic.jar</blockquote>
After you have completed the WLS installation and the FMw installation and configuration, you can reset your PATH back to the way you desire.

JVM 102 error @ BB 8530

Similar Messages

Maybe you are looking for