JWS on client with 56Kb/s modem

Is it practical to plan a Java application to be run on a JWS environment on a hardware close to minimal system config - 466 Mhz pentium, 128 MB memory, and connected to the Internet using 56Kb/s modem. The application is to provide for off-line work, comprise 10 medium complexity screens, and has to implement maintain local copy of several hundred KB database that occasionaly is synchronised with the central server over the Internet, whenever connection is established. Any practical examples appreciated.

Hi RomanJC,
some month ago, I made some tests w/ a swing-based application on a similar hardware configuration. I used an JRE 1.4.2 and the results were promising.
The most challenging aspect seams to be the needed network band-width to download the application. Suppose the application has a size of 1MB and the average data transfer rate is about 4KByte/s. The transmission would roughly take
5 minutes.
There are three ways for optimizing the network transmission: compression, local import and differencing.
Compression: JWS 1.5 supports the pack200 and gzip compression algorithms. Pack200 is a algorithm specialized to compreessing jar-Files. Our experiments have shown that the file size of compressed jars can be reduced up to 15%. IMO, that's quite amazing. Applying compression to our example would reduce the transmission time to under one minute (1MB -> 150KByte).
Local Import: You can also deliver your program by CD or Floppy and import it using the command javaws -import on the client.
Differencing: Once you got the first version deliverd to the client, you might want to update it. Then it is possible to download only the changes to the client. The JNLPDownloadServlet, which is part of the JDK 1.5, supports the on the fly generation of jar-diffs.
Hope that helps,
javaracer.

Similar Messages

AX as client with third party modem/router

Like others, I'm having trouble getting my AX to join an existing network from my third party modem/router (in this case a Siemens SE 515 dsl). After 2 days of sifting posts, changing settings and reset after reset, I'm about to take the thing back or just toss it out the window. I really only want to use the AX for AirTunes but do want to be able to surf at the same time.
My modem/router is set as PPPoE with login details and PPPoE pass-through is enabled, as is NAT. The modem is set to get IP address automatically. WEP-128 is on and I've activated MAC access control (and am sure it's the correct id for the Airport). It's set for DHCP in the range 192.168.1.xx. WDS is activated and the router detects other devices around the place.
In Network settings on my Powerbook I've selected PPPoE and also entered the login details here. In the TCP/IP tab, IPv4 is automatically set to PPP and the computer gets an IP address but it's in 84.xxx... range. Internet access works fine when I use these settings.
Now, reset the AX, in Airport Admin I set it to client (I don't need to extend the network), entered the WEP key and selected the router network name from the pop-up menu. In the Internet tab I select DHCP, in music tab AirTunes is on and I've entered a speaker name. Click update, then...
Nothing happens.
Well, not quite. The orange light on the AX is flashing. When I go into iTunes, the Airport is listed in the pop-up at bottom right but when I select it, iTunes says it is trying to connect and, after a while, fails. Airport Admin can no longer find the AX either.
My hunch is that this is something to do with IP addresses but I really have no idea. Any hints gratefully received.

1. your modem/router should not have "PPPoE pass-through" enabled. The PPPoE connection with your ISP must be handled by the modem/router itself - not by your Mac. The modem/router should be functioning as a NAT router, and all the wireless clients (like your Mac and the Airport Express) of the modem/router should be connecting to it using DHCP.
2. I don't know why you activated WDS on the modem/router. It isn't necessary, and whatever WDS flavor is supported by this modem/router won't be supported by the Airport Express. Turn it off.
3. On the Powerbook, in System Preferences->Network->Show Airport - (a) under the PPPoE tab the box to "connect using PPPoE should NOT be checked and (b) under the TCP/IP tab the only selection should be to configure using DHCP.
Before proceeding to the next steps, you must now make sure your Mac is still able to access the internet wirelessly.
4. Do a factory default reset of the Airport Express. Temporarily switch wireless network connections on the Mac from your modem/router to that of the Airport Express. Run the Airport Admin Utility. In the Airport Admin Utility, select the mode to be "join an existing wireless network". Below that, type in the SSID of your modem/router. Enter the same WEP type and WEP key as used on your modem/router. Make any other configuration changes required under the Music tab, then update settings to the Airport Express. When finished, switch the wireless network connection on the Mac back to that of your modem/router.
5. If you still have trouble, remove all security (MAC address filtering and WEP) from your modem/router and see if you can then get the Airport Express to connect as a client.

J2se version="1.6+" in JNLP not working on a client with Java 1.5

Hi all,
In my deployment scenario I have two jnlp files, one for the app and one for its installer extension. The deployment process works fine on a client with J2SE 1.6 but there are some problems when the client has an older Java installed.
I am trying to enforce a J2SE 1.6 version for my app deployed with WebStart and I have found that
<j2se version="1.6+" ...> has no effect.
The solution that I have found was to change "1.6+" into "1.6.***" and thus the JWS will download and install JRE 1.6 (however I was expecting it to download the latest JRE (update 16) but it installs 1.6 update 7).
Could anybody confirm that?
Thank you in advance.

Thanks for the reply. I think Sun should update the auto-downloaded jre from 6u7 to the latest one.
But this is a minor issue. The problem from my post is that you cannot impose a j2se version number 1.6 or greater. IOW <j2se version="1.6+" ... > has no effect. I have tested this on a clean win xp machine that had installed only j2se 1.5.
I think it is a bug in jws but I want to check this issue with others.

'java.lang.ClassNotFoundException: weblogic.jws.jaxws.client.async.AsyncTransportProvider'

When ı try to set up my project to other computer , my project takes error on build.
I m using eclipse Juno .I looked my weblogic.jar i didn't find weblogic.jws.jaxws.client.async.AsyncTransportProvider
class in it. What should i do ?
Stacktrace :
<Feb 14, 2014 2:28:30 PM PKT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1392370100493' for task '0'. Error is: 'java.lang.ClassNotFoundException: weblogic.jws.jaxws.client.async.AsyncTransportProvider'
java.lang.ClassNotFoundException: weblogic.jws.jaxws.client.async.AsyncTransportProvider
       at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
       at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
       at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
       Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: weblogic.jws.jaxws.client.async.AsyncTransportProvider
       at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
       at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
       at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
       Truncated. see log file for complete stacktrace
>
<Feb 14, 2014 2:28:30 PM PKT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating distribute task for application '_auto_generated_ear_'.>
<Feb 14, 2014 2:28:30 PM PKT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
java.lang.ClassNotFoundException: weblogic.jws.jaxws.client.async.AsyncTransportProvider
       at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
       at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
       at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
       Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: weblogic.jws.jaxws.client.async.AsyncTransportProvider
       at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
       at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
       at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
       at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
       Truncated. see log file for complete stacktrace
>

Is OEPE (Oracle Enterprise Pack for Eclipse) used?

Problem on sending fax with Apple USB modem

Hello everyone,
I use my macmini to manage faxes to help my father's business, as fax is one of the most important mean of communication to our clients. While I can only receive fax from outside to my mac, but I cannot send fax from my mac through "Send PDF" option, it just stop working, and "Waiting for modem to become available" without using my telephone-line. It is weird when I plug it into my macbook that it works.
Look forward to your advice. Thank you,
Victor Tang
Message was edited by: victan7300

I am having problems sending and receiving faxes, too, and have been working with AppleCare level 2. They are off for a couple of days, and the solution is nowhere in sight. They did capture information from my system as I tried to fax, and sent it to engineering. They have determined that I am not getting a dial tone.
When I connect my phone to the jack, I do get a dial tone and can talk on the phone (which I do frequently). I have been provided with two additional new Apple USB modems to try to see if that would fix the problem. It did not make any difference which of the three modems I use, I cannot send or receive faxes. Yesterday, I booted up my old iMac (OS X 10.4.11 with a collapsing hard drive, but an internal modem). I attached this computer to the same phone jack and was able to freely send faxes - every single try.
I downloaded and set up the application PageSender just to see if it was the fax software (I have been trying to just use what came with my MacBook Pro). Using the Apple USB external modem (as I have had to do with this computer and operating system), I could not send any faxes - could not get a dial tone, according to PageSender.
I, therefore, believe that the problem is with the external modem and/or the extensions that operate the external modem.
I did try what you have suggested above - the substitution of the IOSerialFamily.kext:
I partitioned my harddrive into two partitions HD and HD_2. I loaded OS X 10.5.5 (from my CD) onto the second partition. I then copied the IOSerialFamily.kext on my thumb drive (from OS X 10.5.5 the version was 92). Then I upgraded to 10.5.6, and copied the ioSerialFamily.kext on my thumb drive - this time with 10.5.6 the version was 93. I went back to my first partition where I have 10.5.7 (version 94) and tried to transfer version 93 IOSerialFamily.kext to the extensions. As soon as I tried to mount the Apple USB modem I received the following message:
"System extension cannot be used
The system extension”/system/Library/Estensions/IOSerialFamily.kext/contents/PlugIns/Motor olaSM56KUSB.kext was installed improperly and cannot be used. Please try reinstalling it or contact the product’s vendor for an update."
At that point I tried to exchange the version 93 with the one that I removed - version 94, but I continued to get the same message. I decided to reinstall 10.5.7 again hoping that this would solve the message problem. No such luck! I did now have version 94, but the same error message. At this point, I tried a permissions repair. This solved the error problem... but I was still not able to send or receive faxes, because the fax programs could detect not dial tone.
Because I have never sent or received faxes with this computer - only my iBook (10.4.11), I decided to go back to the second partition on my computer and see if I could send a fax from the macBook Pro with 10.5.6. The results are sporadic. I had to try several times, and occasionally I would get a dial tone and could send the fax, but more often, I could not. There was no difference in any of the 2 modems I tried (by now I had returned 1 to the Apple Store), or whether I used the front USB port or the rear USB port. The sending of a fax with MacBook Pro and 10.5.6 was not consistent or reliable and I could only occasionally get a dial tone... with 10.5.7 I can never get a dial tone.
According to my AppleCare representative the engineers are "on this". But I see that the original post was in November, which was prior to 10.5.7; I purchased my MacBook Pro with 10.5.5 in December, so imagine that this problem has been around through several upgrades of 10.5.
This is unbelievably frustrating! Has anyone been able to easily send and receive faxes with 10.5.5?
Chris (hopefully you are still around), did you get any error messages when you exchanged your 10.5.6 IOSerialFamily.kext for the 10.5.7 IOSerialFamily.kext - especially when you mounted- or tried to attach the external modem? If so, how did you handle that?
Sorry that this has been such a long post. I have tried to provide as much information as I could in the hopes of finding a solution. Any ideas???
THANKS!

Sharing problems with usb FAX/modem in lion server

Hi !
I Have a small LAN with three iMac and a mac mini running lion server (and used like a file server).
I need to send and receive a few fax each month, ad yI bought a USR5637 (it work with Lion).
It works almost perfectly with Lion but:
1) Lion server doesn't send a mail (to the indicated adress) when a fax is arrived. Do I need to set an account in mail.app ?
2) I can send a fax only from the mac mini server. I have shared the fax printer, but in the LAN clients with installed the shared printer/FAX, it doesn't work !
I need the fax, can someone hel me ?
Thanks.
Aldo

The server system works so leave that alone.
On your client machine try this. My system sees the Zoom as 'USB Modem @ servername'
Delete the entry for your zoom modem from Printers and Scanners. It probably reads something like USB Modem @ servername.
Add your modem again. Instead of Selecting USB Modem @ servername from the list, choose Add other printer or scanner. In the Add Printer dialog box select USB Modem @ servername. Type a new name in the name box. This time use only letters numbers and dashes. Don't use spaces or special characters. It appears that the spaces or special characters is causing the error. On my computer I entered modem-servername.
If this works for you be sure to enter a defect report at apple.

Office 2013, click icon nothing happens, no errors, no eventlog, MANY clients with this issue

We're an IT solutions provider for companies of all sizes as well, as residential users, and we've been plagued by a new Microsoft-caused issue that's seriously affecting our client's perception of us since it seems like 'you didn't fix it the first
time' or 'you sold us the computer', so it's our responsibility to fix for free.
We've experienced this with 17 people so far, ranging from residential clients with systems that have come from big box stores and from systems we've sold with Microsoft Office 2013 and basically the entire suite stops working.
If you click an icon, you may see an hour glass for a few seconds and nothing happens (but usually nothing happens at all, as though you didn't click it).
Diagnostic steps:
No errors in eventlog, neither under system or application.
No third party add-ins, sometimes it's a stock install on a new / fresh system.
Starting Microsoft Office applications in safe mode, like winword /safe, has no effect.
A quick repair or an online repair will not resolve the issue, it will say it's done but issue still exists.
Microsoft Office 2013 cannot be uninstalled, we always receive the same error code: 0-4
Some systems do not have third party antivirus, some are simply using Microsoft Security Essentials.
This affects all Microsoft Office applications, including Outlook.
Makes no difference if you use another user account or run-as admin.
All Microsoft Office 2013 updates have been installed.
The installation source is undetermined but recent issues stemmed from a physical media (.ISO) install from Microsoft's latest source.
You cannot start the software by clicking on documents created with Office applications.
The only way to remove Microsoft Office 2013 is with the removal tool "O15CTRRemove.diagcab".
The problem returns after a random period of days and no client can relay the actual cause of the issue, it seems random in nature. After the issue is experienced, we go through the same steps including the necessity to utilize the removal tool.
This seems to be a new issue that's come out of the blue within the past few weeks, at least on our end. When 17 random people call out of the blue with the same problem, it suggests it's Windows Update related.
I'm really hoping someone has some insight into this Microsoft glitch and knows of a secret hotfix or special trick to prevent it. I attempted to call Microsoft and it would be more enjoyable to punch a concrete wall since you're dealing with useless people
in a foreign country who can't really comprehend the seriousness or technicality of the issue, and don't really care, and aren't skilled enough to provide
insight.
Does anyone know about this problem?

Thank you for the reply.
I understand the flash you are receiving while launching Excel or Word is very fast. However just wanted to check if it is possible to get a screenshot of it.
Also, are you able to work fine on Excel or Word even after receiving the flash.
It seems the Office installation might have not been done properly.
There is a possibility, everytime you Uninstall any application, there are still some patches left behind which could cause an issue while Installing the same application again or even after Installation is successful, it sometimes gives
issue while launching the application.
If you want to give a try, you may try to Uninstall the product using Offscrub by clicking on the below link & then can have a fresh installation again.
http://support.microsoft.com/kb/2739501
Please let me know the status update once done
Abhijeet, the box flash happens too fast for me to capture a screenshot of it but I believe it's similar to the smaller box activation process (enter your email).
Word and Excel work fine whenever this is observed.
I'm skeptical that this is a "not done properly" kind of scenario, especially when it applies to so many people and many have brand new computers. How can you take a Microsoft Office disc and install it improperly on a new PC? Or how can a person
go through Microsoft's https://officesetup.getmicrosoftkey.com/ setup, use the software for months and suddenly it stops working? If this is a 'not done properly' scenario, then this is a failing of Microsoft's
installation source. I can't reiterate this enough, the software works fine for people since installation date and then randomly stops working at a much later date (but many of them failed last month and this is a newer issue).
I'm starting to get frustrated again as I'd already stated we've used your linked removal tool in my first post and the problem has returned for another user by which I'd used it and reinstalled the product. The client who's PC we have now, one we'd sold
them, needs to be returned to them and while Microsoft Office is currently working, I was told that if this happens again, they're "going to throw the f#(*@ computer in the river". No joke.
If we're at the point where we've moved past evaluating logs, registry keys, or file versions or anything along the lines of a developer determining how this Microsoft bug occurs, then I'll return the system back to the client and hope for the best.
Three strikes and I'm out with this one but perhaps the delayed startup is the final solution... I just wish I knew for sure as we've had a bad year taking a beating for Microsoft's products and their support is the worst in the industry.
It's further frustrating that since I'd touched base with Microsoft via phone calls, the only person who's been able to provide any insight into the issue is me.

Is it possible to be connected with a 3G modem for internet access and a WiFi router for printer sharing at the same time?

For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.

The 3G wireless modem is on one of the PC's correct?
Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
The Mac has the ability to pass, Internet Sharing in the System Preferences.
Do you have software for the Mac to run the 3G modem?

ASA , Cisco VPN client with RADIUS authentication

Hi,
I have configured ASA for Cisco VPN client with RADIUS authentication using Windows 2003 IAS.
All seems to be working I get connected and authenticated. However even I use user name and password from Active Directory when connecting with Cisco VPN client I still have to provide these credentials once again when accessing domain resources.
Should it work like this? Would it be possible to configure ASA/IAS/VPN client in such a way so I enter user name/password just once when connecting and getting access to domain resources straight away?
Thank you.
Kind regards,
Alex

Hi Alex,
It is working as it should.
You can enable the vpn client to start vpn before logon. That way you login to vpn and then logon to the domain. However, you are still entering credentials twice ( vpn and domain) but you have access to domain resources and profiles.
thanks
John

Copy client with open items FI, stocks MM and balance from one client to

Hi Gurus,
I have a question , I want to copy client with next information:
1.- All Cuztomazing
2.- All master data
3.- Only open items FI-AR , FI-AP,
4.- Stocks MM available for production.
5.- Documents sales valids
6.- Complete Balance (fixed , available and current asset, etc.)
From one client to other client.
¿How can I do it?
I know that cuztomazing and master data it's possible, I need to find from 3 to 6 point if it's possible for copy tables or some trx complete this information.
This work it's because my company code changue NIF and information TAX , and I need to have a cut over for carry forward only the describe information.
Thank's a lot
Regards
Julio

Hi Julio,
How did you solve this? I need to perform exactly these steps.
I am very interested in 3, 4 and 6.
Thanks in advance.

Error while creating the HTTP client with destination GB_DPSRetrieve

Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
Kishore

Hi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to develope a XML-RPC client with PL/SQL

Anyone know how to develop a XML-RPC client with PL/SQL?
I've oracle 8i.
Have you some example of code?
Thanks
Paolo

So, you actually want to create the physical directory using JAVA?
Then see:
http://www.oracle-base.com/articles/8i/shell-commands-from-plsql.php

10.6.1 clients with 10.5.8 server -- slow connections/lost delegate

Because of timing, I've yet to upgrade my 10.5.8 server to 10.6.1 server.
However, we've updated a number of clients here to 10.6.1
For many clients, they are finding that iCal is occasionally dumping their delegates.
They can readd them, but after a couple of more days, the delegates will get dumped again. It seems like if I add specific calendars to my list of delegates it's more obvious (so I don't necessarily know if the problem is with clients with really large calendars...)
I've filed bugs on this with Apple, but I'm wondering if anybody else has seen this and come up with a solution yet.
(I have plans to update my server in the next few weeks -- if somebody has seen this problem and has resolved it after they updated their server, let me know that as maybe I can accelerate my timetable for this upgrade....)
Thanks!

I just purchased a new macbook pro 13" w/Snow Leopard pre-installed and I am experiencing the exact same issue. I purchased a regular macbook for my wife (at the same time, about a week ago), and I was able to set up her e-mail account without any problems (same e-mail hosting provider as mine).
My e-mail account/settings work fine on my iPhone, as well as another Windows computer (yes, I have tried deleting com.apple.mail.plist and starting over).
***? I paid a premium for the macbook pro, assumably for better construction, performance, and ease of use. I did not expect to pay to be a beta tester.

HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paul

you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

JWS on client with 56Kb/s modem

Similar Messages

Maybe you are looking for