K/834 no standard cost estimate and ke435 costing key 000 does not exist

Hi ,
scenario as under we have following type of materials
normal Material that has cost estimate
Configuarable material
Material without cost estimate -prices are updated thru MR21 (as some legacy system calculated the price)
There are many company codes and use one or more above  category of material. further we have common Material type and valuation class.
we need cost component split to get updated in COPA and for that i create 2 costing key one for normal and other for normal one and developed an enhancement (KEPC) that check whether material is configurable or not. based on that it assign 001 or 002 costing key
it went well but failed for material that has no cost estimate and got error K/834.
To tackle same we insert further logic to check for normal material whether cost estimate exist, if yes then assign costing key 001 else ignore it. configurable material logic remain as it is. it working fine for normal and Configuarable material but normal material without cost estimate resulted in error KE435.
need to know:
-at first place why system  generates K/834 error for enhancement - earlier we were using assignment rule (KEPC) where we use valuation class and assigned costing key 001, it worked for normal one and ignore configurable one and normal material without cost estimate. I haven't changed costing key rule and exclusive error is not marked .
- any other way to tackle besides resetting message class from error to warning or changing Materila type or valuation class as that is not acceptable due to other complexity.
Regards,
Atul

Hi,
It resolved thru enhancement
Regards,
Atu

Similar Messages

  • Material cost estimate and mateiral cost estimate with quantity structure

    Hi sap guys,
    What is the difference between material cost estimate and material cost estimate with quantity structure

    Hi
    Both are in one way the same.
    Material cost estimate can be calculated as
    1. Material with quantity structure
    2. Material without quantity structure
    You can get more insight into it at the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm
    Regards,
    Suraj

  • Combination of plant SUNP and material type finished product does not exist

    HI i am  suneel
    my issue is  combination of plant SUNP and material type finished product does not exist  when i posting to material in t.code
    MB!C after entering materiel and qty in the selection screen i pressed enter on that time this massage is happening
    Thanks
    with regards
    suneel

    Hi lakshmi pathi ,
    Sorry for the inconvenience i am new for this sap sd and also this community . Actually  yesterday and today i got lot of solutions  from this community .really i feel very happy with this and i continuous searching for my issues and i got so many solutions. these are also i searched but i dint got any solutions so i posted here .
    sorry for the inconvenience
    any way thanking you for giving valuable suggestion.
    with regards
    suneel

  • Career and Job Error - Area EMPLOYEE_CAREER_ERP2005 does not exist

    Hi Experts,
    We are getting following error while click on Career and Job tab on ESS. We checked in Table V_T7XSSSERARB. Entry is maintained.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist  
    Would appreciate kind guidance on this.
    Thanks,
    Aashish

    Waiting for experts comment. We checked services are defined in iViews,Pages,Roles and WorkSet but couldn't resolve issue. Entry also exist in SAP configuration.
    ERROR IS AS FOLLOWS :
    com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:235)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
         at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
         at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
         at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
         at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
    Would really appreciate kind guidance.
    Thanks,
    Aashish
    Edited by: Aashish Brahmbhatt on Oct 2, 2008 10:08 PM

  • Costing run and premilinary cost estimate

    Dear All,
    Is it possible to run cost estimate and premilinary cost estimate for a product cost collector back dated.  I mean for 01.03.2007. I know  it is not possible. But anyother way out.
    ranga

    Hi Rangarajan
    I think it is possible in future date and not backwards.
    Thanks
    Ashok
    Assign points for useful answer

  • Cost/revenue rate E_MOE_DEC, 00000000: unit of measure PDA does not exist

    Dear community,
    I am still working on SAP PPM FICO & CATS integration.
    I can't replicate my cost/revenue rate in the ECC system.
    There is the error message : Cost/revenue rate (name of the cost/revenue rate) : unit of measure PDA does not exist
    Does someone know what PDA is ?
    I customized the units with FTE.
    Thank you in advance for your help.
    Best,
    Cassoké

    Hi Cassoke,
    Through analysis found that you need to define 'Units of Measurement' PDA which is linked to the capacity unit 'FTE'.
    Just check whether you have the PDA unit of measurement in tcode-CUNI or under SPRO-->PPM-->Portfolio Management-->Global Customizing-->Global Settings-->Define Units of Measurement.
    Select dimensions 'Time' and click on 'Units of Measurement' and if no PDA entry is there, create an entry(Attached screenshot for your reference).
    Hope this helps.
    Regards,
    Ravi

  • Error in accounting document for Billing - Costing Key does not exist

    Hi,
    We had activated COPA for updating Record Type - A (Sale Order) and Record Type - F (Billing Document).  Subsequently we have removed all the settings done for Record Type A (Sale Order) including Costing key.
    Now after this change we get the error of "Costing Key XXXX does not exist" during generation of accounting document for Billing.
    Can any body suggest how to over come this error without creating costing key of Record Type A (Sale Order).
    Regards,
    Ela.

    Hi Ela,
    Please use T. code KE4J and remove Costing Key from record type F( Billing) then system wonu2019t look for Costing key during releasing billing document to accounting & use T. code KE40 to correct Costing key settings  if required.
    Regards,
    Shailesh Verma

  • I have a device that shows up in my airplay device list on my iMac, and my phone.  This device does not exist.  How do I get it out of the list? I would like to drop it before I add new airplay devices to my network.

    I have a device that shows up in my airplay device list in iTunes, and on my iPhone that does not exist.  How do I delete it? I have OS X 10.10.1 on my iMac, and iOS 8.1.2 on my iPhone 5.  I would like to get it out before I add new airplay devices to my network.

    I called Apple tech support.  The device turns out to be a WiFi extender.  I never would have guessed that the extender would show up on the list since I wouldn't think of it as an airplay device, and in the list, it shows a little speaker icon.  In the process of talking with Apple, I gained a greater understanding of how airplay works. 
    It turns out that there is no stored list of devices in a file on the mac, or anywhere else.  I have seen a lot of traffic on the web from people trying to modify this list, but there isn't one.  iTunes, and other devices simply poll the network for airplay devices from time to time.
    Have a very happy holiday!
    I would like to get rid of "just give me the aster, and stop wasting my time", and replace it with my name.  The Apple tech support guy never saw that before.  Just my luck.

  • Defferece between cost centre and Master Cost Centre

    Can any body explain defferece between cost centre and Master Cost Centre.
    Appreciate your help.
    Kavitha

    Hi kavitha
                     I dont think there is difference between Cost centre and master Cost Centre.
    It may be Possible that under Cost Centre Hirarchy One Cost Centre is at Top node and other is Child of that Cost Centre.
    Thank YOu.
    Thank YOU.

  • Activity Type: cost element does not exist

    Dear All,
    I am working on ERP  configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
    I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
    In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
    Can anybody guide me on how to go further?
    regards,
    Supriya

    Dear
    Please revivew the following steps when you are creating a New Acvity type :
    OP51 - Check Settings for formulas
    OP54 - Check formulas for Costing
    Ensure that usage of the parameters are indicated.  Some parameters are appropriate for capacity calculation but not for schedule calculation.  If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
    KLH2 - Maintain hierarchy of Activity type group.
    OP19 - Define standard value key
    The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing.  This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with.  Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing.  The pre-requisite for using this transaction is that the parameters must have been pre-created.
    KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01  - Create Activity Type tied to the primary cost element. (the Cost element field)
    KP26  - Change Activity Type/Activity Price Planning - maintain the Variable price
    If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
    The operations Start and Finish date will be extended due to the extra time spent on the work center.  The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order.   The new activity will have a price attached to it and the moving average price will increase.
    Regards
    JH

  • Standard Data Collection Failing with Error ORA-04054: database link  does not exist.

    Hi Gurus,
    When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link  does not exist.
    There is no such Database link exits which is showing in above error.
    Also the database link name in the above error is not profile values in the database.
    I think, concurrent might be fetching this database link name  from some tables related to plan.
    I am not having much knowledge about how this ASCP/APS works.
    Need your help to resolve this issue.
    Thanks,

    Hi,
    ASCP Collections looks at the dblink from instances definitions from.
    1. Responsibility: Advanced Planning Administrator
    2. Navigation: Admin > Instances
    You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

  • Actual activity price does not exist for cost center / activity type

    Hi,
    We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
    We have used a customized program and have loaded the data from se38.
    All this HR data will be saved in CAT2
    Later we transfer the time related data into SAP FI/CO using CAT7.
    +When  tested  with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
    For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
    Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
    We have run the price calculation forr the FY 2010.
    Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
    When uploaded employee time sheets before, all the cost were getting claculated and were entering into  the respective cost elements, but now no amounts are being calculated and it is taking Zero.
    When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
    PLease assit
    Regards,
    shilpa

    Hi
    I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
    Regards
    Ajay M

  • Cost Center does not exist

    Hi,
    I have called "BAPI_GOODSMVT_CREATE" to have the goods issue, the posting period of MM and FI are opened but the it returned a message Cost center XXX /1101019 does not exist on DD.MM.YYYY .
    Any transaction I need to run for the cost center?

    Hi Chung,
    Check if that Cost center exists. i think CC is 1101019.
    Use txn code ks03 to display the cost center. If its there..then check the validity date for that cost center.
    Hope it will give u some idea.
    Cheers,
    Vikram
    Pls reward for helpful replies!!

  • Standard SAP report group 6PP3 does not exist

    A user is attempting to run the transaction S_ALR_87013544 and receives the error "program 6PP3 does not exist". I used gr53 to display report groups it is not in the list.
    I cannot generate 6PP3 either. I cannot create 6PP3 because it is a standard report group
    Any ideas?

    1.   Use GR59 IN THE <TRG> client
         a. 300 in this case
         b.     SOURCE client = 000
         c.     Leave all fields blank – hit EXECUTE
         d.     Select the report group to generate from the list
            i. BPP3
           ii. Select the CONFIRM button

  • Cost element does not exist in CO

    Hi SAP folks,
    In new co code we have copied GL codes from co code 1000. Now while changing cost element in KA02 system gives error message like "Cost element does not exist in controlling area". Why this error message is comming, however all cost elements are automate come from co code 1000....right....how to solve this issue...please anyone do help.....
    how to copy cost elements to new co code from co code 1000 and How to extend existing cost centers to new code. Ex: co code 1122 has 3 cost centers and we need to extend the same to co code 1123. Controlling area is same for both co codes.
    Thanks

    Hi Eli,
    Really, i appreciated for your help.
    But, still my question is not to be answered. I am giving entire picture what i have done earlier.
    1. I have copied 2 co codes(CACA & CACB) from 1000 co code
    2. I have created new chart of a/c (CACA) and assigned to co codes
    3. I have co area as INT and assigned to co codes
    4. I have copied gl codes to 2 co codes from 1000
    5. I have created 5 cost centers newly in 1 co code area
    Here my question is:
    - We need to extend same cost centers to another co code
    - When i am changing cost element, system gives error like no CE in co area..why? and how to resolve?
    Thanks

Maybe you are looking for

  • JPGs not displaying properly in pdfs

    I've created a vectored oval logo in Illustrator CS3. I've made a jpg version of it for my client to insert in Word docs. It's quite large so it's completely sharp when viewed in Photoshop but they say it appears jagged and cut off at the sides and b

  • Configuring Oracle 9i AS to use Java 1.4

    Hi All, Please help me in configuring Oracle 9i Application Server Release 2 to use Java 1.4 Version instead of 1.3 version.

  • "System extension cannot be used" when updating iTunes

    Every time I update iTunes through the standard Software Update, I get multiple messages towards the end of the installation saying: *System extension cannot be used* The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installe

  • How do I create envelopes from my contacts

    I am new to the mac and am having a hard time creating envelopes with addresses in my contact list.

  • Runtime Errors :: CALL_FUNCTION_NOT_FOUND

    Hi all, while executing program on development it is working fine but on qaulity 'SSF_FUNCTION_MODULE_NAME' fm unable to generate FM_NAME and it goes to dump. It shows exeption 'CX_SY_DYN_CALL_ILLEGAL_FUNC'. Please help me out if any one have solutio